On Sun, Mar 17, 2024 at 08:21:58PM GMT, Bjorn Andersson wrote:
> On Thu, Mar 14, 2024 at 10:13:59PM +0530, Mukesh Ojha wrote:
> > Sorry for the late reply, was on vacation.
> >
> > On 3/6/2024 9:24 PM, Konrad Dybcio wrote:
> > >
> > >
> > > On 3/6/24 13:26, Mukesh Ojha wrote:
> > > > Add the qfprom node for sm8450 SoC.
> > > >
> > > > Signed-off-by: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
> > > > ---
> > > > arch/arm64/boot/dts/qcom/sm8450.dtsi | 7 +++++++
> > > > 1 file changed, 7 insertions(+)
> > > >
> > > > diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> > > > b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> > > > index b86be34a912b..02089a388d03 100644
> > > > --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> > > > +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> > > > @@ -4575,6 +4575,13 @@
> > > > };
> > > > };
> > > > + qfprom: efuse@221c8000 {
> > > > + compatible = "qcom,sm8450-qfprom", "qcom,qfprom";
> > > > + reg = <0 0x221c8000 0 0x1000>;
> > >
> > > Is is really only 0x1000-long? Also, is the base you put
> > > here the ECC-corrected part (if that still exists)?
> >
> > No, its not.
> >
> > Entire fuse space is this.
> > 0x221C0000-0x221Cbfff
> >
> > ECC corrected range is this 0x221C2000-0x221C3fff and High level OS
>
> That's 0x2000. Does this then also imply that the ECC-corrected values
> are no longer mapped 1:1 with non-corrected, or why do they differ in
> size?
>
> > does have a access to ECC range however, they are not recommended for
> > SW usage.
> >
> > Above mentioned SW range(4) in the patch is one and only accessible range
> > available out of 0-7 SW ranges(0x221C4000-0x221Cbfff with each
> > size 0x1000) and does not have ECC fuses.
> >
>
> So you're saying that in contrast to other platforms, the 4th software
> range, dedicated for HLOS, does not have a matching ECC-corrected
> shadow? If that's the case, then "not recommended for SW usage" sounds
> wrong.
>
> > All the downstream use cases are getting fulfilled with this.
> >
>
> You only need ECC if you're unlucky...
>
The patch is either incorrect or the commit message is lacking answers
to the questions from Konrad and myself.
Would have appreciated a reply here, but either way I'm marking this as
"changes requested" and dropping it from the queue.
Regards,
Bjorn
