Re: [PATCH v3] serial: port: Don't block system suspend even if bytes are left to xmit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 31, 2024 at 08:09:18AM -0700, Douglas Anderson wrote:
> Recently, suspend testing on sc7180-trogdor based devices has started
> to sometimes fail with messages like this:
> 
>   port a88000.serial:0.0: PM: calling pm_runtime_force_suspend+0x0/0xf8 @ 28934, parent: a88000.serial:0
>   port a88000.serial:0.0: PM: dpm_run_callback(): pm_runtime_force_suspend+0x0/0xf8 returns -16
>   port a88000.serial:0.0: PM: pm_runtime_force_suspend+0x0/0xf8 returned -16 after 33 usecs
>   port a88000.serial:0.0: PM: failed to suspend: error -16
> 
> I could reproduce these problems by logging in via an agetty on the
> debug serial port (which was _not_ used for kernel console) and
> running:
>   cat /var/log/messages
> ...and then (via an SSH session) forcing a few suspend/resume cycles.
> 
> Tracing through the code and doing some printf()-based debugging shows
> that the -16 (-EBUSY) comes from the recently added
> serial_port_runtime_suspend().
> 
> The idea of the serial_port_runtime_suspend() function is to prevent
> the port from being _runtime_ suspended if it still has bytes left to
> transmit. Having bytes left to transmit isn't a reason to block
> _system_ suspend, though. If a serdev device in the kernel needs to
> block system suspend it should block its own suspend and it can use
> serdev_device_wait_until_sent() to ensure bytes are sent.
> 
> The DEFINE_RUNTIME_DEV_PM_OPS() used by the serial_port code means
> that the system suspend function will be pm_runtime_force_suspend().
> In pm_runtime_force_suspend() we can see that before calling the
> runtime suspend function we'll call pm_runtime_disable(). This should
> be a reliable way to detect that we're called from system suspend and
> that we shouldn't look for busyness.
> 
> Fixes: 43066e32227e ("serial: port: Don't suspend if the port is still busy")
> Cc: stable@xxxxxxxxxxxxxxx
> Reviewed-by: Tony Lindgren <tony.lindgren@xxxxxxxxxxxxxxx>
> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>

...

> +	/*
> +	 * Nothing to do on pm_runtime_force_suspend(), see
> +	 * DEFINE_RUNTIME_DEV_PM_OPS.

	 * DEFINE_RUNTIME_DEV_PM_OPS().

(in case you need to send a new version)

> +	 */
> +	if (!pm_runtime_enabled(dev))
> +		return 0;

-- 
With Best Regards,
Andy Shevchenko






[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux