On 31.05.2024 11:02 AM, Taniya Das wrote:
> Update the GDSC wait_val fields as per the default hardware values as
> otherwise they would lead to GDSC FSM state to be stuck and causing
> failures to power on/off. Also add the GDSC flags as applicable and
> add support to control PCIE GDSC's using collapse vote registers.
>
> Fixes: 08c51ceb12f7 ("clk: qcom: add the GCC driver for sa8775p")
> Signed-off-by: Taniya Das <quic_tdas@xxxxxxxxxxx>
> ---
> drivers/clk/qcom/gcc-sa8775p.c | 40 ++++++++++++++++++++++++++++++++++
> 1 file changed, 40 insertions(+)
>
> diff --git a/drivers/clk/qcom/gcc-sa8775p.c b/drivers/clk/qcom/gcc-sa8775p.c
> index 7bb7aa3a7be5..71fa95f59a0a 100644
> --- a/drivers/clk/qcom/gcc-sa8775p.c
> +++ b/drivers/clk/qcom/gcc-sa8775p.c
> @@ -4203,74 +4203,114 @@ static struct clk_branch gcc_video_axi1_clk = {
>
> static struct gdsc pcie_0_gdsc = {
> .gdscr = 0xa9004,
> + .collapse_ctrl = 0x4b104,
> + .collapse_mask = BIT(0),
> + .en_rest_wait_val = 0x2,
> + .en_few_wait_val = 0x2,
> + .clk_dis_wait_val = 0xf,
> .pd = {
> .name = "pcie_0_gdsc",
> },
> .pwrsts = PWRSTS_OFF_ON,
> + .flags = VOTABLE | RETAIN_FF_ENABLE | POLL_CFG_GDSCR,
I have some old dt for this platform, and it doesn't mention the downstream
counterpart flag for it (qcom,support-cfg-gdscr), so please double-check
whether you really want to poll gdcsr + 0x4.
The magic values I trust you have better sources for, the collapse off/masks
look good.
Konrad
