As the drivers default to loading the firmware from the board-specific
location, drop the firmware-name properties. In case of the WCNSS
calibration data drop the path to the file, retaining just the file
name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index aba08424aa38..24779238cc18 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -260,8 +260,6 @@ &mdss_dsi0_out {
&mpss {
status = "okay";
-
- firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn";
};
&mpss_mem {
@@ -388,11 +386,10 @@ &venus_mem {
&wcnss {
status = "okay";
- firmware-name = "qcom/apq8016/wcnss.mbn";
};
&wcnss_ctrl {
- firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin";
+ firmware-name = "WCNSS_qcom_wlan_nv_sbc.bin";
};
&wcnss_iris {
--
2.39.2
