Make the DPU driver use the TE source specified in the DT. If none is
specified, the driver defaults to the first GPIO (mdp_vsync0).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 44 ++++++++++++++++++++++++++++++++-
1 file changed, 43 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index e9991f3756d4..932d0bb41d7e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -505,6 +505,44 @@ static void dpu_kms_wait_flush(struct msm_kms *kms, unsigned crtc_mask)
dpu_kms_wait_for_commit_done(kms, crtc);
}
+static const char *dpu_vsync_sources[] = {
+ [DPU_VSYNC_SOURCE_GPIO_0] = "mdp_gpio0",
+ [DPU_VSYNC_SOURCE_GPIO_1] = "mdp_gpio1",
+ [DPU_VSYNC_SOURCE_GPIO_2] = "mdp_gpio2",
+ [DPU_VSYNC_SOURCE_INTF_0] = "mdp_intf0",
+ [DPU_VSYNC_SOURCE_INTF_1] = "mdp_intf1",
+ [DPU_VSYNC_SOURCE_INTF_2] = "mdp_intf2",
+ [DPU_VSYNC_SOURCE_INTF_3] = "mdp_intf3",
+ [DPU_VSYNC_SOURCE_WD_TIMER_0] = "timer0",
+ [DPU_VSYNC_SOURCE_WD_TIMER_1] = "timer1",
+ [DPU_VSYNC_SOURCE_WD_TIMER_2] = "timer2",
+ [DPU_VSYNC_SOURCE_WD_TIMER_3] = "timer3",
+ [DPU_VSYNC_SOURCE_WD_TIMER_4] = "timer4",
+};
+
+static int dpu_kms_dsi_set_te_source(struct msm_display_info *info,
+ struct msm_dsi *dsi)
+{
+ const char *te_source = msm_dsi_get_te_source(dsi);
+ int i;
+
+ if (!te_source) {
+ info->vsync_source = DPU_VSYNC_SOURCE_GPIO_0;
+ return 0;
+ }
+
+ /* we can not use match_string since dpu_vsync_sources is a sparse array */
+ for (i = 0; i < ARRAY_SIZE(dpu_vsync_sources); i++) {
+ if (dpu_vsync_sources[i] &&
+ !strcmp(dpu_vsync_sources[i], te_source)) {
+ info->vsync_source = i;
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
static int _dpu_kms_initialize_dsi(struct drm_device *dev,
struct msm_drm_private *priv,
struct dpu_kms *dpu_kms)
@@ -543,7 +581,11 @@ static int _dpu_kms_initialize_dsi(struct drm_device *dev,
info.is_cmd_mode = msm_dsi_is_cmd_mode(priv->dsi[i]);
- info.vsync_source = DPU_VSYNC_SOURCE_GPIO_0;
+ rc = dpu_kms_dsi_set_te_source(&info, priv->dsi[i]);
+ if (rc) {
+ DPU_ERROR("failed to identify TE source for dsi display\n");
+ return rc;
+ }
encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_DSI, &info);
if (IS_ERR(encoder)) {
--
2.39.2
