Follow example of other platforms. Rename HS graph nodes to contain 'dwc3_hs' and link SS lanes from DWC3 controllers to QMP PHYs. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> --- .../arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts | 16 ++++---- arch/arm64/boot/dts/qcom/sc8180x-primus.dts | 20 +++++----- arch/arm64/boot/dts/qcom/sc8180x.dtsi | 46 +++++++++++++++++++--- 3 files changed, 58 insertions(+), 24 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts index 6af99116c715..5b226577f9d8 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts @@ -68,7 +68,7 @@ port@0 { reg = <0>; pmic_glink_con0_hs: endpoint { - remote-endpoint = <&usb_prim_role_switch>; + remote-endpoint = <&usb_prim_dwc3_hs>; }; }; @@ -103,7 +103,7 @@ port@0 { reg = <0>; pmic_glink_con1_hs: endpoint { - remote-endpoint = <&usb_sec_role_switch>; + remote-endpoint = <&usb_sec_dwc3_hs>; }; }; @@ -582,6 +582,10 @@ &usb_prim_dwc3 { dr_mode = "host"; }; +&usb_prim_dwc3_hs { + remote-endpoint = <&pmic_glink_con0_hs>; +}; + &usb_prim_qmpphy_dp_in { remote-endpoint = <&mdss_dp0_out>; }; @@ -590,8 +594,8 @@ &usb_prim_qmpphy_out { remote-endpoint = <&pmic_glink_con0_ss>; }; -&usb_prim_role_switch { - remote-endpoint = <&pmic_glink_con0_hs>; +&usb_sec_dwc3_hs { + remote-endpoint = <&pmic_glink_con1_hs>; }; &usb_sec_hsphy { @@ -619,10 +623,6 @@ &usb_sec_qmpphy_out { remote-endpoint = <&pmic_glink_con1_ss>; }; -&usb_sec_role_switch { - remote-endpoint = <&pmic_glink_con1_hs>; -}; - &usb_sec { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts index bfee60c93ccc..65d923497a05 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts @@ -71,7 +71,7 @@ port@0 { reg = <0>; pmic_glink_con0_hs: endpoint { - remote-endpoint = <&usb_prim_role_switch>; + remote-endpoint = <&usb_prim_dwc3_hs>; }; }; @@ -106,7 +106,7 @@ port@0 { reg = <0>; pmic_glink_con1_hs: endpoint { - remote-endpoint = <&usb_sec_role_switch>; + remote-endpoint = <&usb_sec_dwc3_hs>; }; }; @@ -648,6 +648,10 @@ &usb_prim_dwc3 { dr_mode = "host"; }; +&usb_prim_dwc3_hs { + remote-endpoint = <&pmic_glink_con0_hs>; +}; + &usb_prim_qmpphy_dp_in { remote-endpoint = <&mdss_dp0_out>; }; @@ -656,10 +660,6 @@ &usb_prim_qmpphy_out { remote-endpoint = <&pmic_glink_con0_ss>; }; -&usb_prim_role_switch { - remote-endpoint = <&pmic_glink_con0_hs>; -}; - &usb_sec_hsphy { vdda-pll-supply = <&vreg_l5e_0p88>; vdda18-supply = <&vreg_l12a_1p8>; @@ -685,10 +685,6 @@ &usb_sec_qmpphy_out { remote-endpoint = <&pmic_glink_con1_ss>; }; -&usb_sec_role_switch { - remote-endpoint = <&pmic_glink_con1_hs>; -}; - &usb_sec { status = "okay"; }; @@ -697,6 +693,10 @@ &usb_sec_dwc3 { dr_mode = "host"; }; +&usb_sec_dwc3_hs { + remote-endpoint = <&pmic_glink_con1_hs>; +}; + &wifi { memory-region = <&wlan_mem>; diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index 897c0f51a612..2d2cbbff4e13 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -2547,7 +2547,9 @@ port@0 { port@1 { reg = <1>; - usb_prim_qmpphy_usb_ss_in: endpoint {}; + usb_prim_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_prim_dwc3_ss>; + }; }; port@2 { @@ -2592,7 +2594,9 @@ port@0 { port@1 { reg = <1>; - usb_sec_qmpphy_usb_ss_in: endpoint {}; + usb_sec_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_sec_dwc3_ss>; + }; }; port@2 { @@ -2672,8 +2676,23 @@ usb_prim_dwc3: usb@a600000 { phys = <&usb_prim_hsphy>, <&usb_prim_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; - port { - usb_prim_role_switch: endpoint { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_prim_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_prim_dwc3_ss: endpoint { + remote-endpoint = <&usb_prim_qmpphy_usb_ss_in>; + }; }; }; }; @@ -2729,8 +2748,23 @@ usb_sec_dwc3: usb@a800000 { phys = <&usb_sec_hsphy>, <&usb_sec_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; - port { - usb_sec_role_switch: endpoint { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_sec_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_sec_dwc3_ss: endpoint { + remote-endpoint = <&usb_sec_qmpphy_usb_ss_in>; + }; }; }; }; -- 2.39.2