Gluster Users - Date Index

Thread Index

Re: Remove an artificial limitation of disperse volume
- From: Xavier Hernandez <xhernandez@xxxxxxxxxx>
Re: Remove an artificial limitation of disperse volume
- From: Xavier Hernandez <xhernandez@xxxxxxxxxx>
Re: Remove an artificial limitation of disperse volume
- From: Xavier Hernandez <xhernandez@xxxxxxxxxx>
Distributed volumes
- From: "Dave Fan" <dave.fan@xxxxxxxxxx>
Slow performance on samba with small files
- From: Gary Lloyd <g.lloyd@xxxxxxxxxxx>
create geo-replication timed out
- From: "韩楠楠" <hannannan@xxxxxxxxxx>
Re: Input/output error - would not heal
- From: Nag Pavan Chilakam <nchilaka@xxxxxxxxxx>
Re: Moving a physical disk from one machine to another
- From: Ashish Pandey <aspandey@xxxxxxxxxx>
Re: Moving a physical disk from one machine to another
- From: Ted Miller <tmiller21@xxxxxxxx>
Re: Swap space requirements
- From: Cedric Lemarchand <yipikai7@xxxxxxxxx>
GlusterFS & Disk configuration
- From: Dev Sidious <dev.sidious@xxxxxxx>
Re: Input/output error - would not heal
- From: lejeczek <peljasz@xxxxxxxxxxx>
Re: Remove an artificial limitation of disperse volume
- From: Olivier Lambert <lambert.olivier@xxxxxxxxx>
Re: Remove an artificial limitation of disperse volume
- From: Jeff Darcy <jdarcy@xxxxxxxxxx>
Re: Swap space requirements
- From: Gambit15 <dougti+gluster@xxxxxxxxx>
Re: Remove an artificial limitation of disperse volume
- From: Olivier Lambert <lambert.olivier@xxxxxxxxx>
Re: Remove an artificial limitation of disperse volume
- From: Jeff Darcy <jdarcy@xxxxxxxxxx>
Re: Remove an artificial limitation of disperse volume
- From: Olivier Lambert <lambert.olivier@xxxxxxxxx>
Swap space requirements
- From: Mark Connor <markconnor64@xxxxxxxxx>
Re: Remove an artificial limitation of disperse volume
- From: Nag Pavan Chilakam <nchilaka@xxxxxxxxxx>
Remove an artificial limitation of disperse volume
- From: Olivier Lambert <lambert.olivier@xxxxxxxxx>
Re: Input/output error - would not heal
- From: Nag Pavan Chilakam <nchilaka@xxxxxxxxxx>
Re: should geo repl pick up changes to a vol?
- From: lejeczek <peljasz@xxxxxxxxxxx>
Re: GFID Mismatch - Automatic Correction ?
- From: lejeczek <peljasz@xxxxxxxxxxx>
Input/output error - would not heal
- From: lejeczek <peljasz@xxxxxxxxxxx>
Moving a physical disk from one machine to another
- From: Scott Hazelhurst <Scott.Hazelhurst@xxxxxxxxxx>
Re: Strange - Missing hostname-trigger_ip-1 resources
- From: ML Wong <wongmlb@xxxxxxxxx>
Internals of Gluster RPC and Transport Layers by Raghavendra G
- From: Milind Changire via Blue Jeans Network <invite@xxxxxxxxxxxxx>
Re: Strange - Missing hostname-trigger_ip-1 resources
- From: Soumya Koduri <skoduri@xxxxxxxxxx>
Re: replacing one brick in a distribute replicate volume in gluster 3.8
- From: Joseph Lorenzini <jaloren@xxxxxxxxx>
replacing one brick in a distribute replicate volume in gluster 3.8
- From: Joseph Lorenzini <jaloren@xxxxxxxxx>
"{path} is already part of volume" error occurs when mount points are siblings not ancestors
- From: Joseph Lorenzini <jaloren@xxxxxxxxx>
Re: initial pool setup -- bidirectional probe required?
- From: Joseph Lorenzini <jaloren@xxxxxxxxx>
Re: initial pool setup -- bidirectional probe required?
- From: Atin Mukherjee <atin.mukherjee83@xxxxxxxxx>
Re: Strange - Missing hostname-trigger_ip-1 resources
- From: ML Wong <wongmlb@xxxxxxxxx>
Re: Quick performance check?
- From: Momonth <momonth@xxxxxxxxx>
Re: Quick performance check?
- From: Gambit15 <dougti+gluster@xxxxxxxxx>
Re: Quick performance check?
- From: Momonth <momonth@xxxxxxxxx>
Re: Quick performance check?
- From: Cedric Lemarchand <yipikai7@xxxxxxxxx>
Re: Quick performance check?
- From: Gambit15 <dougti+gluster@xxxxxxxxx>
Quick performance check?
- From: Alex Sudakar <alex.sudakar@xxxxxxxxx>
initial pool setup -- bidirectional probe required?
- From: Joseph Lorenzini <jaloren@xxxxxxxxx>
Re: Strange - Missing hostname-trigger_ip-1 resources
- From: Soumya Koduri <skoduri@xxxxxxxxxx>
Re: should geo repl pick up changes to a vol?
- From: Kotresh Hiremath Ravishankar <khiremat@xxxxxxxxxx>
Re: geo repl status: faulty & errors
- From: Kotresh Hiremath Ravishankar <khiremat@xxxxxxxxxx>
Re: [Gluster-devel] Release 3.10 RC0 tagged
- From: Shyam <srangana@xxxxxxxxxx>
Strange - Missing hostname-trigger_ip-1 resources
- From: ML Wong <wongmlb@xxxxxxxxx>
Re: Always writeable distributed volume
- From: Nithya Balachandran <nbalacha@xxxxxxxxxx>
Re: [Gluster-devel] IMP: Release 3.10 beta1 tagging (day-to-day slip and updates)
- From: Shyam <srangana@xxxxxxxxxx>
should geo repl pick up changes to a vol?
- From: lejeczek <peljasz@xxxxxxxxxxx>
Re: failing commits
- From: lejeczek <peljasz@xxxxxxxxxxx>
Re: failing commits
- From: lejeczek <peljasz@xxxxxxxxxxx>
Re: failing commits
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
failing commits
- From: lejeczek <peljasz@xxxxxxxxxxx>
Re: Always writeable distributed volume
- From: "Jesper Led Lauridsen TS Infra server" <JLY@xxxxx>
Re: Always writeable distributed volume
- From: Cedric Lemarchand <yipikai7@xxxxxxxxx>
Always writeable distributed volume
- From: "Jesper Led Lauridsen TS Infra server" <JLY@xxxxx>
geo repl status: faulty & errors
- From: lejeczek <peljasz@xxxxxxxxxxx>
GlusterD2 v4.0dev-5
- From: Kaushal M <kshlmster@xxxxxxxxx>
Re: GFID Mismatch - Automatic Correction ?
- From: Ashok Mall <ashok.mall@xxxxxxxxxxxxxxxxxxxxx>
Re: Expected behaviour of hypervisor on Gluster node loss
- From: Niklaus Hofer <niklaus.hofer@xxxxxxxxxxxxxxxxx>
Re: Expected behaviour of hypervisor on Gluster node loss
- From: Vijay Bellur <vbellur@xxxxxxxxxx>
Re: [Gluster-devel] IMP: Release 3.10 beta1 tagging (day-to-day slip and updates)
- From: Shyam <srangana@xxxxxxxxxx>
Re: Gluster Community Meeting 2016-02-01
- From: Vijay Bellur <vbellur@xxxxxxxxxx>
Gluster Community Meeting 2016-02-01
- From: Kaushal M <kshlmster@xxxxxxxxx>
Announcing GlusterFS-3.7.20
- From: Kaushal M <kshlmster@xxxxxxxxx>
IMP: Release 3.10 beta1 tagging (day-to-day slip and updates)
- From: Shyam <srangana@xxxxxxxxxx>
Expected behaviour of hypervisor on Gluster node loss
- From: Niklaus Hofer <niklaus.hofer@xxxxxxxxxxxxxxxxx>
Re: Populated Open Source Project for gluster 4.0 ???
- From: Kaushal M <kshlmster@xxxxxxxxx>
Re: Compile xlator separately
- From: Kaushal M <kshlmster@xxxxxxxxx>
Re: Location of the gluster client log with libgfapi?
- From: Doug Ingham <dougti@xxxxxxxxx>
Compile xlator separately
- From: David Spisla <david.spisla@xxxxxxxxxxxx>
gluster performance issue
- From: "paf1@xxxxxxxx" <paf1@xxxxxxxx>
Re: Location of the gluster client log with libgfapi?
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
Re: Location of the gluster client log with libgfapi?
- From: Gambit15 <dougti+gluster@xxxxxxxxx>
Re: Location of the gluster client log with libgfapi?
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
Re: Location of the gluster client log with libgfapi?
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
Location of the gluster client log with libgfapi?
- From: Gambit15 <dougti+gluster@xxxxxxxxx>
Re: gluster and multipath
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: gluster and multipath
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: gluster and multipath
- From: Alessandro Briosi <ab1@xxxxxxxxxxx>
Re: possible kernel panic with glusterd
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: possible kernel panic with glusterd
- From: Joseph Lorenzini <jaloren@xxxxxxxxx>
Re: possible kernel panic with glusterd
- From: Samikshan Bairagya <sbairagy@xxxxxxxxxx>
Re: possible kernel panic with glusterd
- From: Joseph Lorenzini <jaloren@xxxxxxxxx>
Re: possible kernel panic with glusterd
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
possible kernel panic with glusterd
- From: Joseph Lorenzini <jaloren@xxxxxxxxx>
Re: gluster and multipath
- From: Alessandro Briosi <ab1@xxxxxxxxxxx>
Re: gluster and multipath
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: gluster and multipath
- From: Cedric Lemarchand <yipikai7@xxxxxxxxx>
Re: gluster and multipath
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: gluster and multipath
- From: Alessandro Briosi <ab1@xxxxxxxxxxx>
Re: gluster and multipath
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: nfs-ganesha rsa.pub download give 403
- From: Kaleb Keithley <kkeithle@xxxxxxxxxx>
Re: rebalance and volume commit hash
- From: Nithya Balachandran <nbalacha@xxxxxxxxxx>
gluster and multipath
- From: Alessandro Briosi <ab1@xxxxxxxxxxx>
Re: HA with nfs-ganesha and Virtual IP
- From: Kaleb Keithley <kkeithle@xxxxxxxxxx>
Re: Convert to Shard - Setting Guidance
- From: Darrell Budic <budic@xxxxxxxxxxxxxxxx>
Re: Cluster not healing
- From: James Wilkins <nebulai@xxxxxxxxx>
Re: Cluster not healing
- From: Gambit15 <dougti+gluster@xxxxxxxxx>
NFS Locking (Very complicated)
- From: Service Mail <ciclopeblu@xxxxxxxxx>
Re: rebalance and volume commit hash
- From: Piotr Misiak <pmisiak@xxxxxxxxxxxxxx>
Re: rebalance and volume commit hash
- From: Piotr Misiak <pmisiak@xxxxxxxxxxxxxx>
HA with nfs-ganesha and Virtual IP
- From: David Spisla <david.spisla@xxxxxxxxxxxx>
Populated Open Source Project for gluster 4.0 ???
- From: David Spisla <david.spisla@xxxxxxxxxxxx>
Cluster not healing
- From: James Wilkins <nebulai@xxxxxxxxx>
https://download.gluster.org/pub/gluster/glusterfs/nfs-ganesha/rsa.pub give 403
- From: Cedric Lemarchand <yipikai7@xxxxxxxxx>
Re: Convert to Shard - Setting Guidance
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
Re: Convert to Shard - Setting Guidance
- From: Darrell Budic <budic@xxxxxxxxxxxxxxxx>
Re: Meeting Gluster users and dev at FOSDEM 2017?
- From: Amye Scavarda <amye@xxxxxxxxxx>
Re: Meeting Gluster users and dev at FOSDEM 2017?
- From: Niels de Vos <ndevos@xxxxxxxxxx>
Re: Meeting Gluster users and dev at FOSDEM 2017?
- From: Olivier Lambert <lambert.olivier@xxxxxxxxx>
Re: Meeting Gluster users and dev at FOSDEM 2017?
- From: Kaleb Keithley <kkeithle@xxxxxxxxxx>
Meeting Gluster users and dev at FOSDEM 2017?
- From: Olivier Lambert <lambert.olivier@xxxxxxxxx>
Re: nfs service not detected
- From: Kaleb Keithley <kkeithle@xxxxxxxxxx>
Re: nfs service not detected
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: ZFS + GlusterFS raid5 low read performance
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
nfs service not detected
- From: Matthew Ma 馬耀堂 (奧圖碼) <matthew.ma@xxxxxxxxxx>
Re: ZFS + GlusterFS raid5 low read performance
- From: Yann Maupu <yann.maupu@xxxxxxxxxxxxxxxxx>
Re: Any documents about /etc/glusterfs/glusterd.vol?
- From: Masao Sakata <sakata@xxxxxxxxxxxx>
Re: High-availability with KVM?
- From: Gambit15 <dougti+gluster@xxxxxxxxx>
Re: High-availability with KVM?
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: High-availability with KVM?
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: High-availability with KVM?
- From: Ziemowit Pierzycki <ziemowit@xxxxxxxxxxxxx>
Re: High-availability with KVM?
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
Re: High-availability with KVM?
- From: Ziemowit Pierzycki <ziemowit@xxxxxxxxxxxxx>
Re: High-availability with KVM?
- From: Gambit15 <dougti+gluster@xxxxxxxxx>
Re: High-availability with KVM?
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
Re: Convert to Shard - Setting Guidance
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
Re: Convert to Shard - Setting Guidance
- From: gustave@xxxxxxxxxxxxxx
Re: High-availability with KVM?
- From: Ziemowit Pierzycki <ziemowit@xxxxxxxxxxxxx>
Re: High-availability with KVM?
- From: Ziemowit Pierzycki <ziemowit@xxxxxxxxxxxxx>
Re: High-availability with KVM?
- From: Gambit15 <dougti+gluster@xxxxxxxxx>
Re: High-availability with KVM?
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
High-availability with KVM?
- From: Ziemowit Pierzycki <ziemowit@xxxxxxxxxxxxx>
Re: Convert to Shard - Setting Guidance
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: Convert to Shard - Setting Guidance
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
Re: Convert to Shard - Setting Guidance
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: Convert to Shard - Setting Guidance
- From: Gambit15 <dougti+gluster@xxxxxxxxx>
Re: Convert to Shard - Setting Guidance
- From: Gambit15 <dougti+gluster@xxxxxxxxx>
Re: Convert to Shard - Setting Guidance
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: Convert to Shard - Setting Guidance
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
Re: Convert to Shard - Setting Guidance
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: Convert to Shard - Setting Guidance
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: Convert to Shard - Setting Guidance
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
Re: Convert to Shard - Setting Guidance
- From: Gambit15 <dougti+gluster@xxxxxxxxx>
Re: RDMA transport problems in GLUSTER on host with MIC
- From: Mohammed Rafi K C <rkavunga@xxxxxxxxxx>
Re: RDMA transport problems in GLUSTER on host with MIC
- From: Anoop C S <anoopcs@xxxxxxxxxx>
Re: RDMA transport problems in GLUSTER on host with MIC
- From: Fedele Stabile <fedele.stabile@xxxxxxxxxxxxx>
Re: RDMA transport problems in GLUSTER on host with MIC
- From: Anoop C S <anoopcs@xxxxxxxxxx>
Re: RDMA transport problems in GLUSTER on host with MIC
- From: Fedele Stabile <fedele.stabile@xxxxxxxxxxxxx>
Re: Convert to Shard - Setting Guidance
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Xavier Hernandez <xhernandez@xxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Ashish Pandey <aspandey@xxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Xavier Hernandez <xhernandez@xxxxxxxxxx>
Re: RDMA transport problems in GLUSTER on host with MIC
- From: Anoop C S <anoopcs@xxxxxxxxxx>
Re: Any documents about /etc/glusterfs/glusterd.vol?
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Any documents about /etc/glusterfs/glusterd.vol?
- From: Masao Sakata <sakata@xxxxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Ashish Pandey <aspandey@xxxxxxxxxx>
Convert to Shard - Setting Guidance
- From: "Gustave Dahl" <gustave@xxxxxxxxxxxxxx>
Gluster Monthly Newsletter, December 2016
- From: Amye Scavarda <amye@xxxxxxxxxx>
Re: Vm migration between diff clusters
- From: WK <wkmail@xxxxxxxxx>
Re: Vm migration between diff clusters
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Re: Vm migration between diff clusters
- From: WK <wkmail@xxxxxxxxx>
Re: rebalance and volume commit hash
- From: Shyam <srangana@xxxxxxxxxx>
Re: ZFS + GlusterFS raid5 low read performance
- From: Xavier Hernandez <xhernandez@xxxxxxxxxx>
Re: Vm migration between diff clusters
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
ZFS + GlusterFS raid5 low read performance
- From: Yann MAUPU <yann.maupu@xxxxxxxxxxxxxxxxx>
Re: Vm migration between diff clusters
- From: Дмитрий Глушенок <glush@xxxxxxxxxx>
Re: Vm migration between diff clusters
- From: WK <wkmail@xxxxxxxxx>
Re: Vm migration between diff clusters
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: Vm migration between diff clusters
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: Vm migration between diff clusters
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
Vm migration between diff clusters
- From: "paf1@xxxxxxxx" <paf1@xxxxxxxx>
Re: Community Meeting 2017-01-18
- From: Kaushal M <kshlmster@xxxxxxxxx>
Community Meeting 2017-01-18
- From: Kaushal M <kshlmster@xxxxxxxxx>
gluster volume uuid
- From: joost@xxxxxxxxxxxxxxxx
Re: 3.8.3 Bitrot signature process
- From: Amudhan P <amudhan83@xxxxxxxxx>
GlusterFS 3.9.1 released
- From: "Kaleb S. KEITHLEY" <kkeithle@xxxxxxxxxx>
RDMA transport problems in GLUSTER on host with MIC
- From: Fedele Stabile <fedele.stabile@xxxxxxxxxxxxx>
Re: An other Gluster 3.8 Long-Term-Maintenance update with the 3.8.8 release
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: rebalance and volume commit hash
- From: Piotr Misiak <pmisiak@xxxxxxxxxxxxxx>
Re: volume start fails
- From: "Paul Bickerstaff [DATACOM]" <PaulBi@xxxxxxxxxxxxx>
Re: volume start fails
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: rebalance and volume commit hash
- From: Jeff Darcy <jdarcy@xxxxxxxxxx>
volume start fails
- From: "Paul Bickerstaff [DATACOM]" <PaulBi@xxxxxxxxxxxxx>
Re: rebalance and volume commit hash
- From: Jeff Darcy <jdarcy@xxxxxxxxxx>
Re: rebalance and volume commit hash
- From: Jeff Darcy <jdarcy@xxxxxxxxxx>
Minutes from Gluster Bug Triage meeting today
- From: Saravanakumar Arumugam <sarumuga@xxxxxxxxxx>
Re: question about info and info.tmp
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: When to use striped volumes?
- From: "Dave Fan" <dave.fan@xxxxxxxxxx>
Re: When to use striped volumes?
- From: Kaushal M <kshlmster@xxxxxxxxx>
Re: When to use striped volumes?
- From: Krutika Dhananjay <kdhananj@xxxxxxxxxx>
REMINDER: Gluster Community Bug Triage meeting at 12:00 UTC (today)
- From: Saravanakumar Arumugam <sarumuga@xxxxxxxxxx>
Re: question about info and info.tmp
- From: songxin <songxin_1980@xxxxxxx>
Re: question about info and info.tmp
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
When to use striped volumes?
- From: "Dave Fan" <dave.fan@xxxxxxxxxx>
Weekly Community meeting 2017-10-18
- From: Kaushal M <kshlmster@xxxxxxxxx>
New schedule for community meetings - 1500UTC every alternate Wednesday.
- From: Kaushal M <kshlmster@xxxxxxxxx>
Re: arbiter node sharing
- From: Ravishankar N <ravishankar@xxxxxxxxxx>
Re: [FOSDEM 2017] Announcing a Gluster Stand!
- From: Amye Scavarda <amye@xxxxxxxxxx>
How to achieve linear performance as adding nodes to gluster cluster (distributed replica volume)?
- From: "H. Ge" <harryge00@xxxxxxxxx>
How to achieve linear performance as adding nodes to gluster cluster (distributed replica volume)?
- From: "haoyuan.ge" <harryge@xxxxxx>
Re: question about info and info.tmp
- From: songxin <songxin_1980@xxxxxxx>
Re: Migration path from native Gluster-NFS towards NFS-Ganesha
- From: Giuseppe Ragusa <giuseppe.ragusa@xxxxxxxxxxx>
Re: Migration path from native Gluster-NFS towards NFS-Ganesha
- From: Giuseppe Ragusa <giuseppe.ragusa@xxxxxxxxxxx>
Re: NFS service dying
- From: Giuseppe Ragusa <giuseppe.ragusa@xxxxxxxxxxx>
Re: Connect to ec2 instance via libgfapi
- From: Niels de Vos <ndevos@xxxxxxxxxx>
rebalance and volume commit hash
- From: Piotr Misiak <pmisiak@xxxxxxxxxxxxxx>
An other Gluster 3.8 Long-Term-Maintenance update with the 3.8.8 release
- From: Niels de Vos <ndevos@xxxxxxxxxx>
questions about the implemention of gf_backtrace_fillframes
- From: "C0reFast" <topchenfu@xxxxxx>
Connect to ec2 instance via libgfapi
- From: David Spisla <david.spisla@xxxxxxxxxxxx>
QoS in GlusterFS
- From: Yann MAUPU <yann.maupu@xxxxxxxxxxxxxxxxx>
Re: Ganesha with Gluster transport RDMA does not work
- From: Andreas Kurzac <akurzac@xxxxxxxxxx>
Re: Migration path from native Gluster-NFS towards NFS-Ganesha
- From: Gambit15 <dougti+gluster@xxxxxxxxx>
rdma transport uses scif0 device (iWARP) on on server with XeonPHI
- From: Fedele Stabile <fedele.stabile@xxxxxxxxxxxxx>
arbiter node sharing
- From: "paf1@xxxxxxxx" <paf1@xxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Re: Migration path from native Gluster-NFS towards NFS-Ganesha
- From: "Kaleb S. KEITHLEY" <kkeithle@xxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Xavier Hernandez <xhernandez@xxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Xavier Hernandez <xhernandez@xxxxxxxxxx>
Re: NFS service dying
- From: Niels de Vos <ndevos@xxxxxxxxxx>
Configuration validation on 32 nodes-gluster: expecting 64 TB but I have only 35 TB
- From: Fedele Stabile <fedele.stabile@xxxxxxxxxxxxx>
Re: File operation failure on simple distributed volume
- From: yonex <yonexyonex@xxxxxxxxxx>
答复: some bricks didn't come up after a server reboot
- From: likun <kun.li@xxxxxxxxxxx>
Re: some bricks didn't come up after a server reboot
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
some bricks didn't come up after a server reboot
- From: likun <kun.li@xxxxxxxxxxx>
Re: question about info and info.tmp
- From: songxin <songxin_1980@xxxxxxx>
Re: CentOS Storage SIG Repo for 3.8 is behind 3 versions (3.8.5). Is it still being used and can I help?
- From: Niels de Vos <ndevos@xxxxxxxxxx>
Re: CentOS Storage SIG Repo for 3.8 is behind 3 versions (3.8.5). Is it still being used and can I help?
- From: Niels de Vos <ndevos@xxxxxxxxxx>
Re: High ram usage by server
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
High ram usage by server
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
Strange problems with my Gluster Cluster
- From: "Fedele Stabile" <fedele.stabile@xxxxxxxxxxxxx>
.deleted folder in glusterfs
- From: "Michele Soragni [fabbricadigitale]" <M.Soragni@xxxxxxxxxxxxxxxxxxx>
Re: CentOS Storage SIG Repo for 3.8 is behind 3 versions (3.8.5). Is it still being used and can I help?
- From: Kaushal M <kshlmster@xxxxxxxxx>
Re: CentOS Storage SIG Repo for 3.8 is behind 3 versions (3.8.5). Is it still being used and can I help?
- From: "Daryl lee" <daryllee@xxxxxxxxxxxx>
Re: [ovirt-users] vdsm IOProcessClient WARNING Timeout waiting for communication thread for client
- From: Nir Soffer <nsoffer@xxxxxxxxxx>
Re: vdsm IOProcessClient WARNING Timeout waiting for communication thread for client
- From: Bill James <bill.james@xxxxxx>
Re: NFS service dying
- From: Giuseppe Ragusa <giuseppe.ragusa@xxxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Re: WRITE => -1 (Input/output error)
- From: Stephen Martin <sm@xxxxxxxxxxxx>
Re: WRITE => -1 (Input/output error)
- From: Ben Werthmann <ben@xxxxxxxxxx>
Re: WRITE => -1 (Input/output error)
- From: Ben Werthmann <ben@xxxxxxxxxx>
Re: CentOS Storage SIG Repo for 3.8 is behind 3 versions (3.8.5). Is it still being used and can I help?
- From: Kaushal M <kshlmster@xxxxxxxxx>
Re: WRITE => -1 (Input/output error)
- From: Stephen Martin <sm@xxxxxxxxxxxx>
Re: WRITE => -1 (Input/output error)
- From: Mohammed Rafi K C <rkavunga@xxxxxxxxxx>
Re: NFS service dying
- From: Niels de Vos <ndevos@xxxxxxxxxx>
Re: CentOS Storage SIG Repo for 3.8 is behind 3 versions (3.8.5). Is it still being used and can I help?
- From: Pavel Szalbot <pavel.szalbot@xxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Xavier Hernandez <xhernandez@xxxxxxxxxx>
Re: [Gluster-devel] Fwd: Behaviour of simple distributed volumes on failed bricks?
- From: Raghavendra G <raghavendra.hg@xxxxxxxxx>
CentOS Storage SIG Repo for 3.8 is behind 3 versions (3.8.5). Is it still being used and can I help?
- From: "Daryl lee" <daryllee@xxxxxxxxxxxx>
Migration path from native Gluster-NFS towards NFS-Ganesha
- From: Giuseppe Ragusa <giuseppe.ragusa@xxxxxxxxxxx>
Re: Gluster node without a brick
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
Re: Gluster node without a brick
- From: Gandalf Corvotempesta <gandalf.corvotempesta@xxxxxxxxx>
Re: Gluster node without a brick
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Re: Gluster node without a brick
- From: Gandalf Corvotempesta <gandalf.corvotempesta@xxxxxxxxx>
Re: [Gluster-devel] Selectively setting loglevel for logs from an xlator
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Gluster node without a brick
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
WRITE => -1 (Input/output error)
- From: Stephen Martin <sm@xxxxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Xavier Hernandez <xhernandez@xxxxxxxxxx>
Re: [Gluster-devel] Fwd: Behaviour of simple distributed volumes on failed bricks?
- From: Raghavendra G <raghavendra.hg@xxxxxxxxx>
Re: [Gluster-devel] Fwd: Behaviour of simple distributed volumes on failed bricks?
- From: Raghavendra G <raghavendra.hg@xxxxxxxxx>
Selectively setting loglevel for logs from an xlator
- From: Raghavendra Gowdappa <rgowdapp@xxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Xavier Hernandez <xhernandez@xxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Re: NFS service dying
- From: Giuseppe Ragusa <giuseppe.ragusa@xxxxxxxxxxx>
Re: Gluster 3.9 repository?
- From: Amye Scavarda <amye@xxxxxxxxxx>
NFS service dying
- From: Paul Allen <paul@xxxxxxxxx>
Re: Gluster 3.9 repository?
- From: "Kaleb S. KEITHLEY" <kkeithle@xxxxxxxxxx>
Gluster 3.9 repository?
- From: "Andrus, Brian Contractor" <bdandrus@xxxxxxx>
Gluster command as non root
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Re: Weekly Community Meeting - 20170111
- From: Kaushal M <kshlmster@xxxxxxxxx>
Re: [Gluster-devel] GlusterFS 3.7.19 released
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: GlusterFS 3.7.19 released
- From: Kaushal M <kshlmster@xxxxxxxxx>
Re: [Gluster-devel] decoupling network.ping-timeout and transport.tcp-user-timeout
- From: Milind Changire <mchangir@xxxxxxxxxx>
GlusterFS 3.7.19 released
- From: Kaushal M <kshlmster@xxxxxxxxx>
Weekly Community Meeting - 20170111
- From: Kaushal M <kshlmster@xxxxxxxxx>
Behaviour of simple distributed volumes on failed bricks?
- From: "B.K.Raghuram" <bkrram@xxxxxxxxx>
Re: Replace replicate in single brick
- From: Ashish Pandey <aspandey@xxxxxxxxxx>
Re: read error: Input/output error but not in brain split stat
- From: likun <kun.li@xxxxxxxxxxx>
Re: Replace replicate in single brick
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: Replace replicate in single brick
- From: "Andrus, Brian Contractor" <bdandrus@xxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Xavier Hernandez <xhernandez@xxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Xavier Hernandez <xhernandez@xxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Xavier Hernandez <xhernandez@xxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Xavier Hernandez <xhernandez@xxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Xavier Hernandez <xhernandez@xxxxxxxxxx>
Re: [Gluster-devel] Lot of EIO errors in disperse volume
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Re: Ganesha with Gluster transport RDMA does not work
- From: Jiffin Tony Thottan <jthottan@xxxxxxxxxx>
Lot of EIO errors in disperse volume
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Re: Replace replicate in single brick
- From: Gandalf Corvotempesta <gandalf.corvotempesta@xxxxxxxxx>
Rebalancing and space efficiency
- From: Cedric Lemarchand <yipikai7@xxxxxxxxx>
Re: Replace replicate in single brick
- From: Ravishankar N <ravishankar@xxxxxxxxxx>
Re: question about info and info.tmp
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: question about info and info.tmp
- From: songxin <songxin_1980@xxxxxxx>
Replace replicate in single brick
- From: "Andrus, Brian Contractor" <bdandrus@xxxxxxx>
Re: File operation failure on simple distributed volume
- From: Mohammed Rafi K C <rkavunga@xxxxxxxxxx>
Re: Ganesha with Gluster transport RDMA does not work
- From: Jiffin Tony Thottan <jthottan@xxxxxxxxxx>
Re: gluster native client failover testing
- From: Colin Coe <colin.coe@xxxxxxxxx>
Re: performance.flush-behind
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: performance.flush-behind
- From: Vijay Bellur <vbellur@xxxxxxxxxx>
Re: performance.flush-behind
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Strange behavior after rebalance
- From: Jordan Willis <jwillis0720@xxxxxxxxx>
performance.flush-behind
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Fwd: Very slow writes through Samba mount to Gluster with crypt on
- From: Jeff Byers <jbyers.sfly@xxxxxxxxx>
Ganesha with Gluster transport RDMA does not work
- From: Andreas Kurzac <akurzac@xxxxxxxxxx>
Re: Renaming Peers
- From: Michael Watters <wattersm@xxxxxxxxxx>
Re: Renaming Peers
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: Cheers and some thoughts
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: GFID Mismatch - Automatic Correction ?
- From: Ravishankar N <ravishankar@xxxxxxxxxx>
Re: GFID Mismatch - Automatic Correction ?
- From: Michael Ward <Michael.Ward@xxxxxxxxxxxxxxxxxx>
Re: Cheers and some thoughts
- From: Gandalf Corvotempesta <gandalf.corvotempesta@xxxxxxxxx>
Re: Cheers and some thoughts
- From: Joe Julian <joe@xxxxxxxxxxxxxxxx>
Re: Cheers and some thoughts
- From: Jeff Darcy <jdarcy@xxxxxxxxxx>
Renaming Peers
- From: Michael Watters <wattersm@xxxxxxxxxx>
Re: Cheers and some thoughts
- From: Michael Watters <wattersm@xxxxxxxxxx>
Re: gluster native client failover testing
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
Re: gluster native client failover testing
- From: Colin Coe <colin.coe@xxxxxxxxx>
Re: Cheers and some thoughts
- From: Gandalf Corvotempesta <gandalf.corvotempesta@xxxxxxxxx>
Re: Cheers and some thoughts
- From: Jeff Darcy <jdarcy@xxxxxxxxxx>
Re: Performance testing striped 4 volume
- From: Cedric Lemarchand <yipikai7@xxxxxxxxx>
Re: gluster native client failover testing
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
gluster native client failover testing
- From: Colin Coe <colin.coe@xxxxxxxxx>
Re: Performance testing striped 4 volume
- From: Karan Sandha <ksandha@xxxxxxxxxx>
Performance testing striped 4 volume
- From: Zack Boll <zackboll@xxxxxxxxx>
Cheers and some thoughts
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: Weekly Community Meeting - 20170104
- From: Kaushal M <kshlmster@xxxxxxxxx>
Re: GFID Mismatch - Automatic Correction ?
- From: Michael Ward <Michael.Ward@xxxxxxxxxxxxxxxxxx>
Re: GFID Mismatch - Automatic Correction ?
- From: Joe Julian <joe@xxxxxxxxxxxxxxxx>
Re: GFID Mismatch - Automatic Correction ?
- From: Ravishankar N <ravishankar@xxxxxxxxxx>
答复: read error: Input/output error but not in brain split stat
- From: likun <kun.li@xxxxxxxxxxx>
Re: GFID Mismatch - Automatic Correction ?
- From: Michael Ward <Michael.Ward@xxxxxxxxxxxxxxxxxx>
Re: Gluster performance advice
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Gluster performance advice
- From: Zack Boll <zackboll@xxxxxxxxx>
Re: read error: Input/output error but not in brain split stat
- From: Ravishankar N <ravishankar@xxxxxxxxxx>
Re: GFID Mismatch - Automatic Correction ?
- From: Ravishankar N <ravishankar@xxxxxxxxxx>
GFID Mismatch - Automatic Correction ?
- From: Michael Ward <Michael.Ward@xxxxxxxxxxxxxxxxxx>
Re: Very slow writes through Samba mount to Gluster with crypt on
- From: Whit Blauvelt <whit.gluster@xxxxxxxxxxxxx>
Removing brick from distributed volume
- From: Kyle Johnson <kjohnson@xxxxxxxxxx>
Weekly Community Meeting - 20170104
- From: Kaushal M <kshlmster@xxxxxxxxx>
read error: Input/output error but not in brain split stat
- From: likun <kun.li@xxxxxxxxxxx>
glusterfs 3.6.2, quota incorrect
- From: mai Hieu <mthieu81@xxxxxxxxx>
Re: gluster volume permissions denied
- From: vincent gromakowski <vincent.gromakowski@xxxxxxxxx>
Re: install Gluster 3.9 on CentOS
- From: Kaleb Keithley <kkeithle@xxxxxxxxxx>
Re: install Gluster 3.9 on CentOS
- From: Ramesh Nachimuthu <rnachimu@xxxxxxxxxx>
Re: install Gluster 3.9 on CentOS
- From: Niels de Vos <ndevos@xxxxxxxxxx>
Re: [Gluster-devel] On Gluster resiliency
- From: Raghavendra G <raghavendra@xxxxxxxxxxx>
Re: Notice: https://download.gluster.org:/pub/gluster/glusterfs/LATEST has changed
- From: Serkan Çoban <cobanserkan@xxxxxxxxx>
答复: how to use a small part of glusterfs volume in kubernetes
- From: likun <kun.li@xxxxxxxxxxx>
Re: how to use a small part of glusterfs volume in kubernetes
- From: Vijay Bellur <vbellur@xxxxxxxxxx>
Re: Volume default options - turn off trash translator
- From: Vijay Bellur <vbellur@xxxxxxxxxx>
Volume default options - turn off trash translator
- From: Massimiliano Ferrero <m.ferrero@xxxxxxxxxxx>
how to use a small part of glusterfs volume in kubernetes
- From: likun <kun.li@xxxxxxxxxxx>
Re: Increasing replica count from 2 to 3
- From: Jackie Tung <jackie@xxxxxxxx>
Re: Increasing replica count from 2 to 3
- From: Joe Julian <joe@xxxxxxxxxxxxxxxx>
Re: Increasing replica count from 2 to 3
- From: Jackie Tung <jackie@xxxxxxxx>
Re: gluster volume permissions denied
- From: vincent gromakowski <vincent.gromakowski@xxxxxxxxx>
Stuck with old IP after re-IP
- From: Thibault Godouet <tibo92@xxxxxxxxxxx>
Re: Increasing replica count from 2 to 3
- From: Ravishankar N <ravishankar@xxxxxxxxxx>
Re: Again about the healing process
- From: Ravishankar N <ravishankar@xxxxxxxxxx>
Re: Increasing replica count from 2 to 3
- From: Ravishankar N <ravishankar@xxxxxxxxxx>
Re: gluster limitation
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: Increasing replica count from 2 to 3
- From: Jackie Tung <jackie@xxxxxxxx>
Increasing replica count from 2 to 3
- From: Jackie Tung <jackie@xxxxxxxx>
gluster limitation
- From: Renjith George <renjith@xxxxxxxxxxxxxxxxxxx>
Again about the healing process
- From: Service Mail <ciclopeblu@xxxxxxxxx>
Re: install Gluster 3.9 on CentOS
- From: Kaleb Keithley <kkeithle@xxxxxxxxxx>
Re: gluster volume permissions denied
- From: vincent gromakowski <vincent.gromakowski@xxxxxxxxx>
Re: gluster volume permissions denied
- From: knarra <knarra@xxxxxxxxxx>
Re: gluster volume permissions denied
- From: vincent gromakowski <vincent.gromakowski@xxxxxxxxx>
Re: 答复: glusterfsd Not tainted error， server crashed
- From: Dmitry Melekhov <dm@xxxxxxxxxx>
Re: install Gluster 3.9 on CentOS
- From: Ramesh Nachimuthu <rnachimu@xxxxxxxxxx>
答复: glusterfsd Not tainted error， server crashed
- From: likun <kun.li@xxxxxxxxxxx>
Cancellation of Bug-Traige meeting
- From: Ankit Raj <anraj@xxxxxxxxxx>
Re: glusterfsd Not tainted error， server crashed
- From: Dmitry Melekhov <dm@xxxxxxxxxx>
glusterfsd Not tainted error， server crashed
- From: likun <kun.li@xxxxxxxxxxx>
Error message when installing GlusterFS 3.9.0
- From: 한우형 <whhan91@xxxxxxxxx>
gluster volume permissions denied
- From: vincent gromakowski <vincent.gromakowski@xxxxxxxxx>
Re: Geo-replication failed to delete from slave file partially written to master volume.
- From: Kotresh Hiremath Ravishankar <khiremat@xxxxxxxxxx>
Re: On Gluster resiliency
- From: David Gossage <dgossage@xxxxxxxxxxxxxxxxxx>
Re: On Gluster resiliency
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Unbalanced system with 3 disk
- From: "Jose V. Carrion" <burcarjo@xxxxxxxxx>
Re: files disappearing and re-appearing
- From: Riccardo Murri <riccardo.murri@xxxxxx>
Failure to transfer all changes to slave volume after geo-replication is re-created
- From: "Viktor Nosov" <vnosov@xxxxxxxxxxxx>
Need to understand this logging in disperse volume
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Re: File operation failure on simple distributed volume
- From: yonex <yonexyonex@xxxxxxxxxx>
On Gluster resiliency
- From: Ivan Rossi <rouge2507@xxxxxxxxx>
Create file process with DHT
- From: "=?gb18030?b?TGlMaQ==?=" <dylan-lili@xxxxxxxxxxx>
DHT DHTLINKFILE location
- From: "=?gb18030?b?wO7Bog==?=" <dylan-lili@xxxxxxxxxxx>
Re: File operation failure on simple distributed volume
- From: Mohammed Rafi K C <rkavunga@xxxxxxxxxx>
Re: DHT DHTLINKFILE location
- From: Mohammed Rafi K C <rkavunga@xxxxxxxxxx>
DHT DHTLINKFILE location
- From: "=?gb18030?b?wO7Bog==?=" <dylan-lili@xxxxxxxxxxx>
Re: install Gluster 3.9 on CentOS
- From: Grant Ridder <shortdudey123@xxxxxxxxx>
Re: Heal command stopped
- From: Mohammed Rafi K C <rkavunga@xxxxxxxxxx>
Heal command stopped
- From: Miloš Čučulović - MDPI <cuculovic@xxxxxxxx>
3.8.5 replica 3 volumes: I/O error on file on fuse mounts
- From: Alastair Neil <ajneil.tech@xxxxxxxxx>
Re: glusterfs client report failed to get endpoints glusterfs
- From: Mohammed Rafi K C <rkavunga@xxxxxxxxxx>
3.8.7 debian
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: [ovirt-users] Python stack trace for VDSM while monitoring GlusterFS volumes in HC HE oVirt 3.6.7 / GlusterFS 3.7.17
- From: Giuseppe Ragusa <giuseppe.ragusa@xxxxxxxxxxx>
High load on healing
- From: Edvin Ekström <edvin.ekstrom@xxxxxxxxxxx>
Re: install Gluster 3.9 on CentOS
- From: "Kaleb S. KEITHLEY" <kkeithle@xxxxxxxxxx>
install Gluster 3.9 on CentOS
- From: Grant Ridder <shortdudey123@xxxxxxxxx>
Re: Error being logged in disperse volumes
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Re: Very slow writes through Samba mount to Gluster with crypt on
- From: Jeff Darcy <jdarcy@xxxxxxxxxx>
Re: Error being logged in disperse volumes
- From: Ashish Pandey <aspandey@xxxxxxxxxx>
Very slow writes through Samba mount to Gluster with crypt on
- From: Whit Blauvelt <whit.gluster@xxxxxxxxxxxxx>
glusterfs client report failed to get endpoints glusterfs
- From: likun <kun.li@xxxxxxxxxxx>
Error being logged in disperse volumes
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Re: RE : Frequent connect and disconnect messages flooded in logs
- From: Micha Ober <micha2k@xxxxxxxxx>
Re: [ovirt-users] Python stack trace for VDSM while monitoring GlusterFS volumes in HC HE oVirt 3.6.7 / GlusterFS 3.7.17
- From: Ramesh Nachimuthu <rnachimu@xxxxxxxxxx>
Re: [ovirt-users] Python stack trace for VDSM while monitoring GlusterFS volumes in HC HE oVirt 3.6.7 / GlusterFS 3.7.17
- From: Giuseppe Ragusa <giuseppe.ragusa@xxxxxxxxxxx>
Re: RE : Frequent connect and disconnect messages flooded in logs
- From: Micha Ober <micha2k@xxxxxxxxx>
Re: RE : Frequent connect and disconnect messages flooded in logs
- From: Mohammed Rafi K C <rkavunga@xxxxxxxxxx>
Re: Broken Pipe - Intermittent
- From: Mohammed Rafi K C <rkavunga@xxxxxxxxxx>
Re: files disappearing and re-appearing
- From: Mohammed Rafi K C <rkavunga@xxxxxxxxxx>
Re: [Gluster-Maintainers] Release 3.10: Feature page status (and call for reviews)
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Release 3.10: Feature page status (and call for reviews)
- From: Shyam <srangana@xxxxxxxxxx>
Re: File operation failure on simple distributed volume
- From: Mohammed Rafi K C <rkavunga@xxxxxxxxxx>
Re: File operation failure on simple distributed volume
- From: Mohammed Rafi K C <rkavunga@xxxxxxxxxx>
Re: File operation failure on simple distributed volume
- From: yonex <yonexyonex@xxxxxxxxxx>
Re: Fwd: Replica brick not working
- From: Miloš Čučulović - MDPI <cuculovic@xxxxxxxx>
Re: RE : Frequent connect and disconnect messages flooded in logs
- From: Mohammed Rafi K C <rkavunga@xxxxxxxxxx>
Re: File operation failure on simple distributed volume
- From: Mohammed Rafi K C <rkavunga@xxxxxxxxxx>
Broken Pipe - Intermittent
- From: "Gustave Dahl" <gustave@xxxxxxxxxxxxxx>
LVM storage for gluster
- From: paf1 <paf1@xxxxxxxx>
Re: Issue in installing Gluster 3.9.0
- From: Amudhan P <amudhan83@xxxxxxxxx>
Re: RE : Frequent connect and disconnect messages flooded in logs
- From: Micha Ober <micha2k@xxxxxxxxx>
Re: RE : Frequent connect and disconnect messages flooded in logs
- From: Riccardo Murri <riccardo.murri@xxxxxx>
Quorum sets node RO even after restoring the heartbeat
- From: Gmail <b.s.mikhael@xxxxxxxxx>
Problems with Mysql foreign keys using GlusterFS as DB location.
- From: Илья Сторчевой (Ярмарка Мастеров - www.livemaster.ru) <i.storchevoy@xxxxxxxxxxxxx>
Re: File operation failure on simple distributed volume
- From: yonex <yonexyonex@xxxxxxxxxx>
Re: How different self healing scenarios works ?
- From: Cedric Lemarchand <yipikai7@xxxxxxxxx>
How different self healing scenarios works ?
- From: Cedric Lemarchand <yipikai7@xxxxxxxxx>
centos SIG Yum Repos
- From: Dmitry Melekhov <dm@xxxxxxxxxx>
Re: [ovirt-users] Python stack trace for VDSM while monitoring GlusterFS volumes in HC HE oVirt 3.6.7 / GlusterFS 3.7.17
- From: Ramesh Nachimuthu <rnachimu@xxxxxxxxxx>
How to rotate the glustershd.log file?
- From: Isamu SUZUKI <cham.glusterfs@xxxxxxxxxx>
Re: GlusterFS 3.8.5 to 3.9 upgrade on CentOS 6.8
- From: Momonth <momonth@xxxxxxxxx>
Issue in installing Gluster 3.9.0
- From: Amudhan P <amudhan83@xxxxxxxxx>
Mysql missed foreign keys using GlusterFS as DB location
- From: Илья Сторчевой (Ярмарка Мастеров - www.livemaster.ru) <i.storchevoy@xxxxxxxxxxxxx>
Fwd: Problems with Mysql foreign keys using GlusterFS as DB location.
- From: Илья Сторчевой (Ярмарка Мастеров - www.livemaster.ru) <i.storchevoy@xxxxxxxxxxxxx>
Tool to find directory issues in Gluster Bricks
- From: Aravinda <avishwan@xxxxxxxxxx>
Weird behavior on just one folder (any ideas how that could happen?)
- From: Andreas Ferrari <andreas.ferrari@xxxxxxxxxxxxx>
Weekly community meeting - 2016-12-14
- From: Kaushal M <kshlmster@xxxxxxxxx>
Re: Fwd: Replica brick not working
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: [ovirt-users] gluster 3.7.17-1.el7.x86_64 fails libvirt/qemu from centos-qemu-ev
- From: lejeczek <peljasz@xxxxxxxxxxx>
Re: Fwd: Replica brick not working
- From: Miloš Čučulović - MDPI <cuculovic@xxxxxxxx>
Re: Pre Validation failed when adding bricks
- From: Cedric Lemarchand <yipikai7@xxxxxxxxx>
Re: [ovirt-users] gluster 3.7.17-1.el7.x86_64 fails libvirt/qemu from centos-qemu-ev
- From: Sahina Bose <sabose@xxxxxxxxxx>
Re: File operation failure on simple distributed volume
- From: Mohammed Rafi K C <rkavunga@xxxxxxxxxx>
Re: Makefile:90: *** missing separator (did you mean TAB instead of 8 spaces?). Stop.
- From: Niels de Vos <ndevos@xxxxxxxxxx>
Re: Fwd: Replica brick not working
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: Pre Validation failed when adding bricks
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: Pre Validation failed when adding bricks
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: Fwd: Replica brick not working
- From: Miloš Čučulović - MDPI <cuculovic@xxxxxxxx>
how to clean up change log
- From: Chao-Ping Chien <cchien@xxxxxxxxx>
Re: Pre Validation failed when adding bricks
- From: Cedric Lemarchand <yipikai7@xxxxxxxxx>
Re: Pre Validation failed when adding bricks
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: GlusterFS 3.8.5 to 3.9 upgrade on CentOS 6.8
- From: Joe Julian <joe@xxxxxxxxxxxxxxxx>
Re: Pre Validation failed when adding bricks
- From: Cedric Lemarchand <yipikai7@xxxxxxxxx>
Re: File operation failure on simple distributed volume
- From: yonex <yonexyonex@xxxxxxxxxx>
Re: GlusterFS 3.8.5 to 3.9 upgrade on CentOS 6.8
- From: Momonth <momonth@xxxxxxxxx>
Re: Pre Validation failed when adding bricks
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: Pre Validation failed when adding bricks
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: GlusterFS 3.8.5 to 3.9 upgrade on CentOS 6.8
- From: "Kaleb S. KEITHLEY" <kkeithle@xxxxxxxxxx>
Pre Validation failed when adding bricks
- From: Cedric Lemarchand <yipikai7@xxxxxxxxx>
GlusterFS 3.8.5 to 3.9 upgrade on CentOS 6.8
- From: Momonth <momonth@xxxxxxxxx>
Re: File operation failure on simple distributed volume
- From: Mohammed Rafi K C <rkavunga@xxxxxxxxxx>
Announcing GlusterFS-3.7.18
- From: Kaushal M <kshlmster@xxxxxxxxx>
Call for Papers, Red Hat Summit
- From: Amye Scavarda <amye@xxxxxxxxxx>
glusterd fails to start as systemd service when system starts in...
- From: lejeczek <peljasz@xxxxxxxxxxx>
File operation failure on simple distributed volume
- From: yonex <yonexyonex@xxxxxxxxxx>
problems with geo-replication.
- From: Alvin Starr <alvin@xxxxxxxxxx>
Re: Can I remove a brick for dispersed volume on 3.9?
- From: Cedric Lemarchand <yipikai7@xxxxxxxxx>
Can I remove a brick for dispersed volume on 3.9?
- From: "Zhang Hang" <hangzzzzz@xxxxxx>
Re: Geo-replication failed to delete from slave file partially written to master volume.
- From: "Viktor Nosov" <vnosov@xxxxxxxxxxxx>
Glustertests with 3 Nodes and dispersed Volumes are slow
- From: Bode, Jörg <bode@xxxxxxxxx>
Re: Geo-replication failed to delete from slave file partially written to master volume.
- From: "Viktor Nosov" <vnosov@xxxxxxxxxxxx>
[Glusterfs-client] Glusterfs client crashed
- From: Binh Pham Van <binhpv@xxxxxxxxxx>
Re: [Gluster-devel] Release 3.10: Feature list frozen
- From: Shyam <srangana@xxxxxxxxxx>
Failed to save the backtrace warning when healing volume
- From: mabi <mabi@xxxxxxxxxxxxx>
Re: RE : Frequent connect and disconnect messages flooded in logs
- From: Micha Ober <micha2k@xxxxxxxxx>
Re: RE : Frequent connect and disconnect messages flooded in logs
- From: Joe Julian <joe@xxxxxxxxxxxxxxxx>
Re: RE : Frequent connect and disconnect messages flooded in logs
- From: Riccardo Murri <riccardo.murri@xxxxxx>
Re: Geo-replication failed to delete from slave file partially written to master volume.
- From: Kotresh Hiremath Ravishankar <khiremat@xxxxxxxxxx>
Re: Fwd: Replica brick not working
- From: Pranith Kumar Karampuri <pkarampu@xxxxxxxxxx>
Re: Fwd: Replica brick not working
- From: Pranith Kumar Karampuri <pkarampu@xxxxxxxxxx>
Re: Fwd: Replica brick not working
- From: Pranith Kumar Karampuri <pkarampu@xxxxxxxxxx>
Re: Makefile:90: *** missing separator (did you mean TAB instead of 8 spaces?). Stop.
- From: mabi <mabi@xxxxxxxxxxxxx>
Re: Fwd: Replica brick not working
- From: Ravishankar N <ravishankar@xxxxxxxxxx>
Re: Fwd: Replica brick not working
- From: Miloš Čučulović - MDPI <cuculovic@xxxxxxxx>
Re: Fwd: Replica brick not working
- From: Miloš Čučulović - MDPI <cuculovic@xxxxxxxx>
Re: Fwd: Replica brick not working
- From: Miloš Čučulović - MDPI <cuculovic@xxxxxxxx>
Re: Fwd: Replica brick not working
- From: Ravishankar N <ravishankar@xxxxxxxxxx>
Re: RE : Frequent connect and disconnect messages flooded in logs
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: Fwd: Replica brick not working
- From: Miloš Čučulović - MDPI <cuculovic@xxxxxxxx>
Re: Fwd: Replica brick not working
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: RE : Frequent connect and disconnect messages flooded in logs
- From: Micha Ober <micha2k@xxxxxxxxx>
Re: Replica brick not working
- From: Miloš Čučulović - MDPI <cuculovic@xxxxxxxx>
Re: Replica brick not working
- From: Miloš Čučulović - MDPI <cuculovic@xxxxxxxx>
Re: How to properly set ACLs in GlusterFS?
- From: Дмитрий Глушенок <glush@xxxxxxxxxx>
Re: Makefile:90: *** missing separator (did you mean TAB instead of 8 spaces?). Stop.
- From: Anoop C S <anoopcs@xxxxxxxxxx>
Re: Replica brick not working
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: Replica brick not working
- From: Ravishankar N <ravishankar@xxxxxxxxxx>
Re: Replica brick not working
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: RE : Frequent connect and disconnect messages flooded in logs
- From: Mohammed Rafi K C <rkavunga@xxxxxxxxxx>
Makefile:90: *** missing separator (did you mean TAB instead of 8 spaces?). Stop.
- From: mabi <mabi@xxxxxxxxxxxxx>
How to properly set ACLs in GlusterFS?
- From: Alexandr Porunov <alexandr.porunov@xxxxxxxxx>
Cancelled: Weekly Community Meeting 2016-12-07
- From: Kaushal M <kshlmster@xxxxxxxxx>
Re: Dispersed volume and auto-heal
- From: Serkan Çoban <cobanserkan@xxxxxxxxx>
Dispersed volume and auto-heal
- From: Cedric Lemarchand <yipikai7@xxxxxxxxx>
Re: Replica brick not working
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: Geo-replication failed to delete from slave file partially written to master volume.
- From: Kotresh Hiremath Ravishankar <khiremat@xxxxxxxxxx>
Re: RE : Frequent connect and disconnect messages flooded in logs
- From: Micha Ober <micha2k@xxxxxxxxx>
Geo-replication failed to delete from slave file partially written to master volume.
- From: "Viktor Nosov" <vnosov@xxxxxxxxxxxx>
Glusterfs - Australian Consulting
- From: Ryan Mills <millsy2009@xxxxxxxxxxx>
Geo-replication updates
- From: Aravinda <avishwan@xxxxxxxxxx>
Replica brick not working
- From: Miloš Čučulović - MDPI <cuculovic@xxxxxxxx>
Re: GlusterFS best practices
- From: Momonth <momonth@xxxxxxxxx>
glustercli-python project updates
- From: Aravinda <avishwan@xxxxxxxxxx>
Minutes from Gluster Bug Triage meeting today
- From: Saravanakumar Arumugam <sarumuga@xxxxxxxxxx>
Re: Add new server to glusterFS (replica)
- From: Miloš Čučulović - MDPI <cuculovic@xxxxxxxx>
REMINDER: Gluster Community Bug Triage meeting at 12:00 UTC (today)
- From: Saravanakumar Arumugam <sarumuga@xxxxxxxxxx>
Re: Arbiter Addition in Replicated environment
- From: Ravishankar N <ravishankar@xxxxxxxxxx>
Arbiter Addition in Replicated environment
- From: Atul Yadav <atulyadavtech@xxxxxxxxx>
Re: RE : Frequent connect and disconnect messages flooded in logs
- From: Mohammed Rafi K C <rkavunga@xxxxxxxxxx>
Re: Invalid atime with gluster-NFS
- From: Niels de Vos <ndevos@xxxxxxxxxx>
Re: GlusterFS best practices
- From: David Gossage <dgossage@xxxxxxxxxxxxxxxxxx>
Re: Invalid atime with gluster-NFS
- From: Eivind Sarto <eivindsarto@xxxxxxxxx>
GlusterFS best practices
- From: Momonth <momonth@xxxxxxxxx>
Re: restoring a volume: best practise for backup and restore
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
restoring a volume: best practise for backup and restore
- From: "Paul Bickerstaff [DATACOM]" <PaulBi@xxxxxxxxxxxxx>
Re: glusterfsd/glusterfs process taking CPU load higher than usual
- From: ABHISHEK PALIWAL <abhishpaliwal@xxxxxxxxx>
Assertion failed: lru_inode_ctx->block_num > 0
- From: qingwei wei <tchengwee@xxxxxxxxx>
GNU TAR - file changed as we read it
- From: Pablo J Rebollo Sosa <pablo.rebollo@xxxxxxx>
Re: Invalid atime with gluster-NFS
- From: Niels de Vos <ndevos@xxxxxxxxxx>
Re: dealing with gluster outages due to disk timeouts
- From: Дмитрий Глушенок <glush@xxxxxxxxxx>
Re: corruption using gluster and iSCSI with LIO
- From: Дмитрий Глушенок <glush@xxxxxxxxxx>
Re: Gluster 3.7.17 distributed-replicated volume experiences almost regular Gluster internal NFS subprocess crash (CentOS 7.2)
- From: Giuseppe Ragusa <giuseppe.ragusa@xxxxxxxxxxx>
Re: Add new server to glusterFS (replica)
- From: mabi <mabi@xxxxxxxxxxxxx>
Re: RE : Frequent connect and disconnect messages flooded in logs
- From: Micha Ober <micha2k@xxxxxxxxx>
Re: Add new server to glusterFS (replica)
- From: "Page, Garrett S" <garrett.s.page@xxxxxxxxx>
Re: Add new server to glusterFS (replica)
- From: Nag Pavan Chilakam <nchilaka@xxxxxxxxxx>
Add new server to glusterFS (replica)
- From: Miloš Čučulović - MDPI <cuculovic@xxxxxxxx>
Invalid atime with gluster-NFS
- From: Eivind Sarto <eivindsarto@xxxxxxxxx>
Gluster Upgrade from 3.7.3 to 3.7.17
- From: "Page, Garrett S" <garrett.s.page@xxxxxxxxx>
Re: glusterfsd/glusterfs process taking CPU load higher than usual
- From: ABHISHEK PALIWAL <abhishpaliwal@xxxxxxxxx>
Re: NFS timeouts?
- From: Yannick Perret <yannick.perret@xxxxxxxxxxxxx>
NFS timeouts?
- From: Yannick Perret <yannick.perret@xxxxxxxxxxxxx>
remove old gluster storage domain and resize remaining gluster storage domain
- From: Bill James <bill.james@xxxxxx>
Re: [Gluster-devel] Weekly Community Meeting 2016-11-30
- From: Kaushal M <kshlmster@xxxxxxxxx>
undeleteble directory
- From: tetSU <tetsucceed@xxxxxxxxx>
Re: [Gluster-devel] Weekly Community Meeting 2016-11-30
- From: Amye Scavarda <amye@xxxxxxxxxx>
Re: glusterfsd/glusterfs process taking CPU load higher than usual
- From: ABHISHEK PALIWAL <abhishpaliwal@xxxxxxxxx>
Re: [FOSDEM 2017] Announcing a Gluster Stand!
- From: AMIT KUMAR JAISWAL <amitkumarj441@xxxxxxxxx>
Gluster Community Newsletter, November 2016
- From: Amye Scavarda <amye@xxxxxxxxxx>
[FOSDEM 2017] Announcing a Gluster Stand!
- From: Amye Scavarda <amye@xxxxxxxxxx>
Re: RE : Frequent connect and disconnect messages flooded in logs
- From: Micha Ober <micha2k@xxxxxxxxx>
Weekly Community Meeting 2016-11-30
- From: Kaushal M <kshlmster@xxxxxxxxx>
Re: glusterfsd/glusterfs process taking CPU load higher than usual
- From: ABHISHEK PALIWAL <abhishpaliwal@xxxxxxxxx>
RE : Frequent connect and disconnect messages flooded in logs
- From: Mohammed Rafi K C <rkavunga@xxxxxxxxxx>
Re: How-To downgrade GlusterFS
- From: Micha Ober <micha2k@xxxxxxxxx>
Gluster 3.7.17 distributed-replicated volume experiences almost regular Gluster internal NFS subprocess crash (CentOS 7.2)
- From: Giuseppe Ragusa <giuseppe.ragusa@xxxxxxxxxxx>
Re: How-To downgrade GlusterFS
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: glusterfs-client on solaris 10
- From: Kevin Lemonnier <lemonnierk@xxxxxxxxx>
glusterfs-client on solaris 10
- From: Barbara Bonfiglio <barbara.bonfiglio@xxxxxxxxxx>
glusterfsd/glusterfs process taking CPU load higher than usual
- From: ABHISHEK PALIWAL <abhishpaliwal@xxxxxxxxx>
How-To downgrade GlusterFS
- From: Micha Ober <micha2k@xxxxxxxxx>
Re: Convert from replication to EC
- From: Ashish Pandey <aspandey@xxxxxxxxxx>
Re: Announcing Gluster 3.9
- From: Dj Merrill <gluster@xxxxxxxx>
Re: Announcing Gluster 3.9
- From: Ben Werthmann <ben@xxxxxxxxxx>
Convert from replication to EC
- From: Gandalf Corvotempesta <gandalf.corvotempesta@xxxxxxxxx>
Re: [Gluster-devel] Hole punch support
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Re: [Gluster-devel] Hole punch support
- From: Niels de Vos <ndevos@xxxxxxxxxx>
capacities
- From: Paul Feuvraux <illoxx.jyloxx@xxxxxxxxxxxxxxx>
Re: Announcing Gluster 3.9
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: Geo-replication slaves are faulty after startup
- From: Aravinda <avishwan@xxxxxxxxxx>
Re: How to shrink replicated volume from 3 to 2 nodes?
- From: Alexandr Porunov <alexandr.porunov@xxxxxxxxx>
Re: How to shrink replicated volume from 3 to 2 nodes?
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: How to shrink replicated volume from 3 to 2 nodes?
- From: Alexandr Porunov <alexandr.porunov@xxxxxxxxx>
Re: How to shrink replicated volume from 3 to 2 nodes?
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
How to shrink replicated volume from 3 to 2 nodes?
- From: Alexandr Porunov <alexandr.porunov@xxxxxxxxx>
Geo-replication session is work but replication doesn't
- From: Alexandr Porunov <alexandr.porunov@xxxxxxxxx>
Re: How to mount shared_storage on boot? (failed to fetch volume file (key:shared_storage))
- From: Alexandr Porunov <alexandr.porunov@xxxxxxxxx>
How to mount shared_storage on boot? (failed to fetch volume file (key:shared_storage))
- From: Alexandr Porunov <alexandr.porunov@xxxxxxxxx>
Re: When to use Arbiter volumes and quorum options?
- From: Alexandr Porunov <alexandr.porunov@xxxxxxxxx>
Re: When to use Arbiter volumes and quorum options?
- From: Ravishankar N <ravishankar@xxxxxxxxxx>
Re: [Gluster-devel] Glusterfs 3.7.11 with LibGFApi in Qemu on Ubuntu Xenial does not work
- From: André Bauer <abauer@xxxxxxxxx>
When to use Arbiter volumes and quorum options?
- From: Alexandr Porunov <alexandr.porunov@xxxxxxxxx>
Geo-replication slaves are faulty after startup
- From: Alexandr Porunov <alexandr.porunov@xxxxxxxxx>
Re: Unable to start/deploy VMs after Qemu/Gluster upgrade to 2.0.0+dfsg-2ubuntu1.28glusterfs3.7.17trusty1
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Re: Unable to start/deploy VMs after Qemu/Gluster upgrade to 2.0.0+dfsg-2ubuntu1.28glusterfs3.7.17trusty1
- From: Lindsay Mathieson <lindsay.mathieson@xxxxxxxxx>
Unable to start/deploy VMs after Qemu/Gluster upgrade to 2.0.0+dfsg-2ubuntu1.28glusterfs3.7.17trusty1
- From: Martin Toth <snowmailer@xxxxxxxxx>
Re: geo replication as backup
- From: Ivan Rossi <rouge2507@xxxxxxxxx>
Impact of low optical power on GlusterFS?
- From: Pieter Baele <pieter.baele@xxxxxxxxx>
Re: DISPERSED VOLUME
- From: Serkan Çoban <cobanserkan@xxxxxxxxx>
DISPERSED VOLUME
- From: Alexandre Blanca <alexandre.blanca@xxxxxxxx>
Re: question about info and info.tmp
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: not to reconnect between client and server because of race condition
- From: songxin <songxin_1980@xxxxxxx>
Re: question about info and info.tmp
- From: songxin <songxin_1980@xxxxxxx>
Re: question about info and info.tmp
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: not to reconnect between client and server because of race condition
- From: songxin <songxin_1980@xxxxxxx>
Re: not to reconnect between client and server because of race condition
- From: Kaushal M <kshlmster@xxxxxxxxx>
Re: question about info and info.tmp
- From: songxin <songxin_1980@xxxxxxx>
not to reconnect between client and server because of race condition
- From: songxin <songxin_1980@xxxxxxx>
I can't write files whose form is ".<FILE>.[hash]"
- From: Taehwa Lee <alghost.lee@xxxxxxxxx>
Re: geo replication as backup
- From: Gambit15 <dougti+gluster@xxxxxxxxx>
Hole punch support
- From: Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx>
Re: question about info and info.tmp
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: question about info and info.tmp
- From: songxin <songxin_1980@xxxxxxx>
dealing with gluster outages due to disk timeouts
- From: Christian Rice <crice@xxxxxxxxxxx>
Re: Why not all of my NFS servers are online?
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: Announcing Gluster 3.9
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: Files won't heal, although no obvious problem visible
- From: Pavel Cernohorsky <pavel.cernohorsky@xxxxxxxxxxxx>
Re: Files won't heal, although no obvious problem visible
- From: Pavel Cernohorsky <pavel.cernohorsky@xxxxxxxxxxxx>
Re: Announcing Gluster 3.9
- From: Dj Merrill <gluster@xxxxxxxx>
Re: Files won't heal, although no obvious problem visible
- From: Ravishankar N <ravishankar@xxxxxxxxxx>
Files won't heal, although no obvious problem visible
- From: Pavel Cernohorsky <pavel.cernohorsky@xxxxxxxxxxxx>
Re: Files won't heal, although no obvious problem visible
- From: Ravishankar N <ravishankar@xxxxxxxxxx>
Why not all of my NFS servers are online?
- From: Jin Li <lijin.abc@xxxxxxxxx>
Announcing Gluster 3.9
- From: Amye Scavarda <amye@xxxxxxxxxx>
Fwd: Weekly Community Meeting - 2016-11-23
- From: Kaushal M <kshlmster@xxxxxxxxx>
question about "All subvolumes are down"
- From: songxin <songxin_1980@xxxxxxx>
Announcing release 3.10 schedule
- From: Shyam <srangana@xxxxxxxxxx>
Re: geo replication as backup
- From: mabi <mabi@xxxxxxxxxxxxx>
question about Transport endpoint is not connected
- From: songxin <songxin_1980@xxxxxxx>
Re: geo replication as backup
- From: Gandalf Corvotempesta <gandalf.corvotempesta@xxxxxxxxx>
Re: geo replication as backup
- From: Aravinda <avishwan@xxxxxxxxxx>
Re: Duplicate UUID entries in "gluster peer status" command
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: How to enable shared_storage?
- From: Alexandr Porunov <alexandr.porunov@xxxxxxxxx>
Re: How to enable shared_storage?
- From: Alexandr Porunov <alexandr.porunov@xxxxxxxxx>
Re: How to enable shared_storage?
- From: Alexandr Porunov <alexandr.porunov@xxxxxxxxx>
Re: How to enable shared_storage?
- From: Alexandr Porunov <alexandr.porunov@xxxxxxxxx>
Re: Duplicate UUID entries in "gluster peer status" command
- From: ABHISHEK PALIWAL <abhishpaliwal@xxxxxxxxx>
GlusterFS fuse client read performance problem
- From: Satake Code <satakecode@xxxxxxxxx>
gluster brick hang/High CPU load after 10 hours file transfer test
- From: James Zhu <james.zhu@xxxxxxxxxxx>
Conflicting info on whether replicated bricks both online
- From: Whit Blauvelt <whit.gluster@xxxxxxxxxxxxx>
Re: Duplicate UUID entries in "gluster peer status" command
- From: ABHISHEK PALIWAL <abhishpaliwal@xxxxxxxxx>
question about Transport endpoint is not connected
- From: songxin <songxin_1980@xxxxxxx>
Re: Duplicate UUID entries in "gluster peer status" command
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: geo replication as backup
- From: Gandalf Corvotempesta <gandalf.corvotempesta@xxxxxxxxx>
Re: Duplicate UUID entries in "gluster peer status" command
- From: ABHISHEK PALIWAL <abhishpaliwal@xxxxxxxxx>
Re: How to enable shared_storage?
- From: Jiffin Tony Thottan <jthottan@xxxxxxxxxx>
Re: How to force remove geo session?
- From: Alexandr Porunov <alexandr.porunov@xxxxxxxxx>
Re: How to enable shared_storage?
- From: Alexandr Porunov <alexandr.porunov@xxxxxxxxx>
Re: How to force remove geo session?
- From: Kotresh Hiremath Ravishankar <khiremat@xxxxxxxxxx>
Re: How to enable shared_storage?
- From: Jiffin Tony Thottan <jthottan@xxxxxxxxxx>
Re: Duplicate UUID entries in "gluster peer status" command
- From: ABHISHEK PALIWAL <abhishpaliwal@xxxxxxxxx>
Re: Duplicate UUID entries in "gluster peer status" command
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Re: Duplicate UUID entries in "gluster peer status" command
- From: ABHISHEK PALIWAL <abhishpaliwal@xxxxxxxxx>
Re: Duplicate UUID entries in "gluster peer status" command
- From: ABHISHEK PALIWAL <abhishpaliwal@xxxxxxxxx>
Re: Duplicate UUID entries in "gluster peer status" command
- From: Atin Mukherjee <amukherj@xxxxxxxxxx>
Duplicate UUID entries in "gluster peer status" command
- From: ABHISHEK PALIWAL <abhishpaliwal@xxxxxxxxx>
Re: question about info and info.tmp
- From: songxin <songxin_1980@xxxxxxx>
Re: question about info and info.tmp
- From: Atin Mukherjee <atin.mukherjee83@xxxxxxxxx>

[Index of Archives] [Gluster Development] [Linux Filesytems Development] [Linux Kernel Development] [Linux ARM Kernel] [Linux MIPS] [Linux S390] [Bugtraq] [Fedora ARM]