Re: [Gluster-devel] Lot of EIO errors in disperse volume

Ashish Pandey <aspandey@xxxxxxxxxx> · Fri, 20 Jan 2017 02:56:45 -0500 (EST)

Now, as Xavi has explained  2 probable main issues, we can start to debug it one by one.

Problem  2 - 

- Check if shd is running or not, "gluster v status <vol name>"
- See if you can find this file in "gluster v heal <vol name > info"
- Run heal manually using   "gluster v heal <vol name > " or "gluster v heal <vol name > full"
- Check if you are still seeing the file in heal info o rnot. Also, check xattr's of the specific file.
- Still, if you are seeing the different versions and size on one brick that means heal has not happened and, above all, this is the most important issue.
- You shold also check if the brick connections are fine or not. 

For problem 1 -

- You have to depend on logs and see whay a perticular file has not been written on a brick. Check all the logs, mount logs,
shd logs and also brick logs. may be at that point of time some connection issue was triggered and that could have been logged in brick logs.

Ashish

From: "Xavier Hernandez" <xhernandez@xxxxxxxxxx>
To: "Ankireddypalle Reddy" <areddy@xxxxxxxxxxxxx>, "Ashish Pandey" <aspandey@xxxxxxxxxx>
Cc: gluster-users@xxxxxxxxxxx, "Gluster Devel (gluster-devel@xxxxxxxxxxx)" <gluster-devel@xxxxxxxxxxx>
Sent: Friday, January 20, 2017 1:11:24 PM
Subject: Re:  [Gluster-devel] Lot of EIO errors in disperse volume

Hi Ram,

On 20/01/17 08:02, Ankireddypalle Reddy wrote:
> Ashish,
>
>                  Thanks for looking in to the issue. In the given
> example the size/version matches for file on glusterfs4 and glusterfs5
> nodes. The file is empty on glusterfs6. Now what happens if glusterfs5
> goes down. Though the SLA factor of 2 is met  still I will not be able
> to access the data.

True, but having a brick with inconsistent data is the same as having it 
down. You would have lost 2 bricks out of 3.

The problem is how to detect the inconsistent data, what is causing it 
and why self-heal (apparently) is not healing it.

> The problem is that writes did not fail for the file
> to indicate the issue to the application.

That's the expected behavior. Since we have redundancy 1, a loss or 
failure on a single fragment is hidden from the application. However 
this triggers internal procedures to repair the problem on the 
background. This also seems to not be working.

There are two issues to identify here:

1. Why the write fails in first place
2. Why self-heal is unable to repair it

Probably the root cause is the same for both problems, but I'm not sure.

For 1 there should be some warning or error in the mount log, since one 
of the bricks is reporting an error, even if ec is able to report 
success to the application later.

For 2 the analysis could be more complex, but most probably there should 
be some warning or error message in the mount log and/or self-heal log 
of one of the servers.

Xavi

>  It’s not that we are
> encountering issue for every file on the mount point. The issue happens
> randomly for different files.
>
>
>
> [root@glusterfs4 glusterfs]# gluster volume info
>
>
>
> Volume Name: glusterfsProd
>
> Type: Distributed-Disperse
>
> Volume ID: 622aa3ee-958f-485f-b3c1-fb0f6c8db34c
>
> Status: Started
>
> Number of Bricks: 12 x (2 + 1) = 36
>
> Transport-type: tcp
>
> Bricks:
>
> Brick1: glusterfs4sds:/ws/disk1/ws_brick
>
> Brick2: glusterfs5sds:/ws/disk1/ws_brick
>
> Brick3: glusterfs6sds:/ws/disk1/ws_brick
>
> Brick4: glusterfs4sds:/ws/disk10/ws_brick
>
> Brick5: glusterfs5sds:/ws/disk10/ws_brick
>
> Brick6: glusterfs6sds:/ws/disk10/ws_brick
>
> Brick7: glusterfs4sds:/ws/disk11/ws_brick
>
> Brick8: glusterfs5sds:/ws/disk11/ws_brick
>
> Brick9: glusterfs6sds:/ws/disk11/ws_brick
>
> Brick10: glusterfs4sds:/ws/disk2/ws_brick
>
> Brick11: glusterfs5sds:/ws/disk2/ws_brick
>
> Brick12: glusterfs6sds:/ws/disk2/ws_brick
>
> Brick13: glusterfs4sds:/ws/disk3/ws_brick
>
> Brick14: glusterfs5sds:/ws/disk3/ws_brick
>
> Brick15: glusterfs6sds:/ws/disk3/ws_brick
>
> Brick16: glusterfs4sds:/ws/disk4/ws_brick
>
> Brick17: glusterfs5sds:/ws/disk4/ws_brick
>
> Brick18: glusterfs6sds:/ws/disk4/ws_brick
>
> Brick19: glusterfs4sds:/ws/disk5/ws_brick
>
> Brick20: glusterfs5sds:/ws/disk5/ws_brick
>
> Brick21: glusterfs6sds:/ws/disk5/ws_brick
>
> Brick22: glusterfs4sds:/ws/disk6/ws_brick
>
> Brick23: glusterfs5sds:/ws/disk6/ws_brick
>
> Brick24: glusterfs6sds:/ws/disk6/ws_brick
>
> Brick25: glusterfs4sds:/ws/disk7/ws_brick
>
> Brick26: glusterfs5sds:/ws/disk7/ws_brick
>
> Brick27: glusterfs6sds:/ws/disk7/ws_brick
>
> Brick28: glusterfs4sds:/ws/disk8/ws_brick
>
> Brick29: glusterfs5sds:/ws/disk8/ws_brick
>
> Brick30: glusterfs6sds:/ws/disk8/ws_brick
>
> Brick31: glusterfs4sds:/ws/disk9/ws_brick
>
> Brick32: glusterfs5sds:/ws/disk9/ws_brick
>
> Brick33: glusterfs6sds:/ws/disk9/ws_brick
>
> Brick34: glusterfs4sds:/ws/disk12/ws_brick
>
> Brick35: glusterfs5sds:/ws/disk12/ws_brick
>
> Brick36: glusterfs6sds:/ws/disk12/ws_brick
>
> Options Reconfigured:
>
> storage.build-pgfid: on
>
> performance.readdir-ahead: on
>
> nfs.export-dirs: off
>
> nfs.export-volumes: off
>
> nfs.disable: on
>
> auth.allow: glusterfs4sds,glusterfs5sds,glusterfs6sds
>
> diagnostics.client-log-level: INFO
>
> [root@glusterfs4 glusterfs]#
>
>
>
> Thanks and Regards,
>
> Ram
>
> *From:*Ashish Pandey [mailto:aspandey@xxxxxxxxxx]
> *Sent:* Thursday, January 19, 2017 10:36 PM
> *To:* Ankireddypalle Reddy
> *Cc:* Xavier Hernandez; gluster-users@xxxxxxxxxxx; Gluster Devel
> (gluster-devel@xxxxxxxxxxx)
> *Subject:* Re:  [Gluster-devel] Lot of EIO errors in
> disperse volume
>
>
>
> Ram,
>
>
>
> I don't understand what do you mean by saying "redundancy factor of 2 is
> met in a 3:1 disperse volume".
> You have given the xattr's of only 3 bricks.
>
> All the above 2 sentence and output of getxattr contradicts each other.
>
> In the given scenario, if you have (2+1) ec configuration, and 2 bricks
> are having same size and version, then there should not be
>
> any problem to access this file.  Run heal and 3rd fragment will also
> bee healthy.
>
>
>
> I think there has been major gap in providing the complete and correct
> information about the volume and all the logs and activities.
> Could you please provide the following -
>
> 1 - gluster v info - please give us the output of this command
>
> 2 - Let's consider only one file which you are not able to access and
> find out the reason.
>
> 3 - Try to create and write some files on mount point and see if there
> is any issue with new file creation if yes, why, provide logs.
>
>
>
> Specific but enough information is required to find the root cause of
> the issue.
>
>
>
> Ashish
>
>
>
>
>
>
>
> ------------------------------------------------------------------------
>
> *From: *"Ankireddypalle Reddy" <areddy@xxxxxxxxxxxxx
> <mailto:areddy@xxxxxxxxxxxxx>>
> *To: *"Ankireddypalle Reddy" <areddy@xxxxxxxxxxxxx
> <mailto:areddy@xxxxxxxxxxxxx>>, "Xavier Hernandez"
> <xhernandez@xxxxxxxxxx <mailto:xhernandez@xxxxxxxxxx>>
> *Cc: *gluster-users@xxxxxxxxxxx <mailto:gluster-users@xxxxxxxxxxx>,
> "Gluster Devel (gluster-devel@xxxxxxxxxxx
> <mailto:gluster-devel@xxxxxxxxxxx>)" <gluster-devel@xxxxxxxxxxx
> <mailto:gluster-devel@xxxxxxxxxxx>>
> *Sent: *Friday, January 20, 2017 3:20:46 AM
> *Subject: *Re:  [Gluster-devel] Lot of EIO errors in
> disperse volume
>
>
>
> Xavi,
>             Finally I am able to locate the files for which we are
> seeing the mismatch.
>
>
>
> [2017-01-19 21:20:10.002737] W [MSGID: 122056]
> [ec-combine.c:875:ec_combine_check] 0-glusterfsProd-disperse-0:
> Mismatching xdata in answers of 'LOOKUP' for
> f5e61224-17f6-4803-9f75-dd74cd79e248
> [2017-01-19 21:20:10.002776] W [MSGID: 122006]
> [ec-combine.c:207:ec_iatt_combine] 0-glusterfsProd-disperse-0: Failed to
> combine iatt (inode: 11490333518038950472-11490333518038950472, links:
> 1-1, uid: 0-0, gid: 0-0, rdev: 0-0, size: 4800512-4734976, mode:
> 100775-100775) for f5e61224-17f6-4803-9f75-dd74cd79e248
>
>
>
> GFID f5e61224-17f6-4803-9f75-dd74cd79e248 maps to file
> /ws/disk1/ws_brick/Folder_01.05.2017_21.15/CV_MAGNETIC/V_32410/CHUNK_424795/SFILE_CONTAINER_158
>
>
>
> The size field differs between the bricks of this sub volume.
>
>
>
> [root@glusterfs4 glusterfs]# getfattr -d -e hex -m .
> /ws/disk1/ws_brick/Folder_01.05.2017_21.15/CV_MAGNETIC/V_32410/CHUNK_424795/SFILE_CONTAINER_158
> trusted.ec.size=0x00000000000e0000
> trusted.ec.version=0x00000000000000080000000000000008
>
>
>
> [root@glusterfs5 ws]# getfattr -d -e hex -m .
> /ws/disk1/ws_brick/Folder_01.05.2017_21.15/CV_MAGNETIC/V_32410/CHUNK_424795/SFILE_CONTAINER_158
> trusted.ec.size=0x00000000000e0000
> trusted.ec.version=0x00000000000000080000000000000008
>
>
>
> [root@glusterfs6 glusterfs]# getfattr -d -e hex -m .
> /ws/disk1/ws_brick/Folder_01.05.2017_21.15/CV_MAGNETIC/V_32410/CHUNK_424795/SFILE_CONTAINER_158
> getfattr: Removing leading '/' from absolute path names
> trusted.ec.size=0x0000000000000000
> trusted.ec.version=0x00000000000000000000000000000008
>
>
>
> On glusterfs6 writes seem to have failed and the file appears to be an
> empty file.
> [root@glusterfs6 glusterfs]# stat
> /ws/disk1/ws_brick/Folder_01.05.2017_21.15/CV_MAGNETIC/V_32410/CHUNK_424795/SFILE_CONTAINER_158
>   File:
> '/ws/disk1/ws_brick/Folder_01.05.2017_21.15/CV_MAGNETIC/V_32410/CHUNK_424795/SFILE_CONTAINER_158'
>   Size: 0               Blocks: 0          IO Block: 4096   regular
> empty file
>
>
>
> This looks like a major issue. Since we are left with no redundancy for
> these files and if the brick on other node fails then we will not be
> able to access this data though the redundancy factor of 2 is met in a
> 3:1 disperse volume.
>
>
>
> Thanks and Regards,
> Ram
>
>
>
> -----Original Message-----
> From: gluster-users-bounces@xxxxxxxxxxx
> <mailto:gluster-users-bounces@xxxxxxxxxxx>
> [mailto:gluster-users-bounces@xxxxxxxxxxx] On Behalf Of Ankireddypalle Reddy
> Sent: Monday, January 16, 2017 9:41 AM
> To: Xavier Hernandez
> Cc: gluster-users@xxxxxxxxxxx <mailto:gluster-users@xxxxxxxxxxx>;
> Gluster Devel (gluster-devel@xxxxxxxxxxx <mailto:gluster-devel@xxxxxxxxxxx>)
> Subject: Re:  [Gluster-devel] Lot of EIO errors in
> disperse volume
>
>
>
> Xavi,
>            Thanks. I will start by tracking the delta if any in return
> codes from the bricks for writes in EC. I have a feeling that  if we
> could get to the bottom of this issue then the EIO errors could be
> ultimately avoided.  Please note that while we are testing all these on
> a standby setup we continue to encounter the EIO errors on our
> production setup which is running @ 3.7.18.
>
>
>
> Thanks and Regards,
> Ram
>
>
>
> -----Original Message-----
> From: Xavier Hernandez [mailto:xhernandez@xxxxxxxxxx]
> Sent: Monday, January 16, 2017 6:54 AM
> To: Ankireddypalle Reddy
> Cc: gluster-users@xxxxxxxxxxx <mailto:gluster-users@xxxxxxxxxxx>;
> Gluster Devel (gluster-devel@xxxxxxxxxxx <mailto:gluster-devel@xxxxxxxxxxx>)
> Subject: Re: [Gluster-devel]  Lot of EIO errors in
> disperse volume
>
>
>
> Hi Ram,
>
>
>
> On 16/01/17 12:33, Ankireddypalle Reddy wrote:
>> Xavi,
>>           Thanks. Is there any other way to map from GFID to path.
>
>
>
> The only way I know is to search all files from bricks and lookup for
> the trusted.gfid xattr.
>
>
>
>> I will look for a way to share the TRACE logs. Easier way might be to add some extra logging. I could do that if you could let me know functions in which you are interested..
>
>
>
> The problem is that I don't know where the problem is. One possibility
> could be to track all return values from all bricks for all writes and
> then identify which ones belong to an inconsistent file.
>
>
>
> But if this doesn't reveal anything interesting we'll need to look at
> some other place. And this can be very tedious and slow.
>
>
>
> Anyway, what we are looking now is not the source of an EIO, since there
> are two bricks with consistent state and the file should be perfectly
> readable and writable. It's true that there's some problem here and it
> could derive in EIO if one of the healthy bricks degrades, but at least
> this file shouldn't be giving EIO errors for now.
>
>
>
> Xavi
>
>
>
>>
>> Sent on from my iPhone
>>
>>> On Jan 16, 2017, at 6:23 AM, Xavier Hernandez <xhernandez@xxxxxxxxxx <mailto:xhernandez@xxxxxxxxxx>> wrote:
>>>
>>> Hi Ram,
>>>
>>>> On 13/01/17 18:41, Ankireddypalle Reddy wrote:
>>>> Xavi,
>>>>             I enabled TRACE logging. The log grew up to 120GB and could not make much out of it. Then I started logging GFID in the code where we were seeing errors.
>>>>
>>>> [2017-01-13 17:02:01.761349] I [dict.c:3065:dict_dump_to_log] 0-glusterfsProd-disperse-0: dict=0x7fa6706bc690 ((trusted.ec.size:0:0:0:0:30:6b:0:0:)(trusted.ec.version:0:0:0:0:0:0:2a:38:0:0:0:0:0:0:2a:38:))
>>>> [2017-01-13 17:02:01.761360] I [dict.c:3065:dict_dump_to_log] 0-glusterfsProd-disperse-0: dict=0x7fa6706bed64 ((trusted.ec.size:0:0:0:0:0:0:0:0:)(trusted.ec.version:0:0:0:0:0:0:0:0:0:0:0:0:0:0:2a:38:))
>>>> [2017-01-13 17:02:01.761365] W [MSGID: 122056] [ec-combine.c:881:ec_combine_check] 0-glusterfsProd-disperse-0: Mismatching xdata in answers of 'LOOKUP'
>>>> [2017-01-13 17:02:01.761405] I [dict.c:166:key_value_cmp] 0-glusterfsProd-disperse-0: 'trusted.ec.size' is different in two dicts (8, 8)
>>>> [2017-01-13 17:02:01.761417] I [dict.c:3065:dict_dump_to_log] 0-glusterfsProd-disperse-0: dict=0x7fa6706bbb14 ((trusted.ec.size:0:0:0:0:30:6b:0:0:)(trusted.ec.version:0:0:0:0:0:0:2a:38:0:0:0:0:0:0:2a:38:))
>>>> [2017-01-13 17:02:01.761428] I [dict.c:3065:dict_dump_to_log] 0-glusterfsProd-disperse-0: dict=0x7fa6706bed64 ((trusted.ec.size:0:0:0:0:0:0:0:0:)(trusted.ec.version:0:0:0:0:0:0:0:0:0:0:0:0:0:0:2a:38:))
>>>> [2017-01-13 17:02:01.761433] W [MSGID: 122056] [ec-combine.c:881:ec_combine_check] 0-glusterfsProd-disperse-0: Mismatching xdata in answers of 'LOOKUP'
>>>> [2017-01-13 17:02:01.761442] W [MSGID: 122006] [ec-combine.c:214:ec_iatt_combine] 0-glusterfsProd-disperse-0: Failed to combine iatt (inode: 11275691004192850514-11275691004192850514, gfid: 60b990ed-d741-4176-9c7b-4d3a25fb8252  -  60b990ed-d741-4176-9c7b-4d3a25fb8252,  links: 1-1, uid: 0-0, gid: 0-0, rdev: 0-0,size: 406650880-406683648,
> mode: 100775-100775)
>>>>
>>>> The file for which we are seeing this error turns out to be having a GFID of 60b990ed-d741-4176-9c7b-4d3a25fb8252
>>>>
>>>> Then I tried looking for find out the file with this GFID. It pointed me to following path. I was expecting a real file system path from the following turorial:
>>>> https://gluster.readthedocs.io/en/latest/Troubleshooting/gfid-to-path/
>>>
>>> I think this method only works if bricks have the inode cached.
>>>
>>>>
>>>> getfattr -n trusted.glusterfs.pathinfo -e text /mnt/gfid/.gfid/60b990ed-d741-4176-9c7b-4d3a25fb8252
>>>> getfattr: Removing leading '/' from absolute path names
>>>> # file: mnt/gfid/.gfid/60b990ed-d741-4176-9c7b-4d3a25fb8252
>>>> trusted.glusterfs.pathinfo="(<DISTRIBUTE:glusterfsProd-dht> (<EC:glusterfsProd-disperse-0> <POSIX(/ws/disk1/ws_brick):glusterfs6:/ws/disk1/ws_brick/.glusterfs/60/b9/60b990ed-d741-4176-9c7b-4d3a25fb8252> <POSIX(/ws/disk1/ws_brick):glusterfs5:/ws/disk1/ws_brick/.glusterfs/60/b9/60b990ed-d741-4176-9c7b-4d3a25fb8252>))"
>>>>
>>>> Then I looked for the xatttrs for these files from all the 3 bricks
>>>>
>>>> [root@glusterfs4 glusterfs]# getfattr -d -m . -e hex /ws/disk1/ws_brick/.glusterfs/60/b9/60b990ed-d741-4176-9c7b-4d3a25fb8252
>>>> getfattr: Removing leading '/' from absolute path names
>>>> # file: ws/disk1/ws_brick/.glusterfs/60/b9/60b990ed-d741-4176-9c7b-4d3a25fb8252
>>>> trusted.bit-rot.version=0x02000000000000005877a8dc00041138
>>>> trusted.ec.config=0x0000080301000200
>>>> trusted.ec.size=0x0000000000000000
>>>> trusted.ec.version=0x00000000000000000000000000002a38
>>>> trusted.gfid=0x60b990edd74141769c7b4d3a25fb8252
>>>>
>>>> [root@glusterfs5 bricks]# getfattr -d -m . -e hex /ws/disk1/ws_brick/.glusterfs/60/b9/60b990ed-d741-4176-9c7b-4d3a25fb8252
>>>> getfattr: Removing leading '/' from absolute path names
>>>> # file: ws/disk1/ws_brick/.glusterfs/60/b9/60b990ed-d741-4176-9c7b-4d3a25fb8252
>>>> trusted.bit-rot.version=0x02000000000000005877a8dc000c92d0
>>>> trusted.ec.config=0x0000080301000200
>>>> trusted.ec.dirty=0x00000000000000160000000000000000
>>>> trusted.ec.size=0x00000000306b0000
>>>> trusted.ec.version=0x0000000000002a380000000000002a38
>>>> trusted.gfid=0x60b990edd74141769c7b4d3a25fb8252
>>>>
>>>> [root@glusterfs6 ee]# getfattr -d -m . -e hex /ws/disk1/ws_brick/.glusterfs/60/b9/60b990ed-d741-4176-9c7b-4d3a25fb8252
>>>> getfattr: Removing leading '/' from absolute path names
>>>> # file: ws/disk1/ws_brick/.glusterfs/60/b9/60b990ed-d741-4176-9c7b-4d3a25fb8252
>>>> trusted.bit-rot.version=0x02000000000000005877a8dc000c9436
>>>> trusted.ec.config=0x0000080301000200
>>>> trusted.ec.dirty=0x00000000000000160000000000000000
>>>> trusted.ec.size=0x00000000306b0000
>>>> trusted.ec.version=0x0000000000002a380000000000002a38
>>>> trusted.gfid=0x60b990edd74141769c7b4d3a25fb8252
>>>>
>>>> It turns out that the size and version in fact does not match for one of the files.
>>>
>>> It seems as if the brick on glusterfs4 didn't receive any write request (or they failed for some reason). Do you still have the trace log ? is there any way I could download it ?
>>>
>>> Xavi
>>>
>>>>
>>>> Thanks and Regards,
>>>> Ram
>>>>
>>>> -----Original Message-----
>>>> From: gluster-devel-bounces@xxxxxxxxxxx
> <mailto:gluster-devel-bounces@xxxxxxxxxxx>
> [mailto:gluster-devel-bounces@xxxxxxxxxxx] On Behalf Of Ankireddypalle Reddy
>>>> Sent: Friday, January 13, 2017 4:17 AM
>>>> To: Xavier Hernandez
>>>> Cc: gluster-users@xxxxxxxxxxx <mailto:gluster-users@xxxxxxxxxxx>; Gluster
> Devel (gluster-devel@xxxxxxxxxxx <mailto:gluster-devel@xxxxxxxxxxx>)
>>>> Subject: Re: [Gluster-devel]  Lot of EIO errors in disperse volume
>>>>
>>>> Xavi,
>>>>        Thanks for explanation. Will collect TRACE logs today.
>>>>
>>>> Thanks and Regards,
>>>> Ram
>>>>
>>>> Sent from my iPhone
>>>>
>>>>> On Jan 13, 2017, at 3:03 AM, Xavier Hernandez <xhernandez@xxxxxxxxxx <mailto:xhernandez@xxxxxxxxxx>> wrote:
>>>>>
>>>>> Hi Ram,
>>>>>
>>>>>> On 12/01/17 22:14, Ankireddypalle Reddy wrote:
>>>>>> Xavi,
>>>>>>            I changed the logging to log the individual bytes. Consider the following from ws-glus.log file where /ws/glus is the mount point.
>>>>>>
>>>>>> [2017-01-12 20:47:59.368102] I [MSGID: 109063]
>>>>>> [dht-layout.c:718:dht_layout_normalize] 0-glusterfsProd-dht: Found
>>>>>> anomalies in
>>>>>> /Folder_01.05.2017_21.15/CV_MAGNETIC/V_30970/CHUNK_390607 (gfid =
>>>>>> e694387f-dde7-410b-9562-914a994d5e85). Holes=1 overlaps=0
>>>>>> [2017-01-12 20:47:59.391218] I [MSGID: 109036]
>>>>>> [dht-common.c:9082:dht_log_new_layout_for_dir_selfheal]
>>>>>> 0-glusterfsProd-dht: Setting layout of
>>>>>> /Folder_01.05.2017_21.15/CV_MAGNETIC/V_30970/CHUNK_390607 with
>>>>>> [Subvol_name: glusterfsProd-disperse-0, Err: -1 , Start: 2505397587 ,
>>>>>> Stop: 2863311527 , Hash: 1 ], [Subvol_name: glusterfsProd-disperse-1,
>>>>>> Err: -1 , Start: 2863311528 , Stop: 3221225468 , Hash: 1 ],
>>>>>> [Subvol_name: glusterfsProd-disperse-10, Err: -1 , Start: 3221225469
>>>>>> , Stop: 3579139409 , Hash: 1 ], [Subvol_name:
>>>>>> glusterfsProd-disperse-11, Err: -1 , Start: 3579139410 , Stop:
>>>>>> 3937053350 , Hash: 1 ], [Subvol_name: glusterfsProd-disperse-2, Err:
>>>>>> -1 , Start: 3937053351 , Stop: 4294967295 , Hash: 1 ], [Subvol_name:
>>>>>> glusterfsProd-disperse-3, Err: -1 , Start: 0 , Stop: 357913940 ,
>>>>>> Hash: 1 ], [Subvol_name: glusterfsProd-disperse-4, Err: -1 , Start:
>>>>>> 357913941 , Stop: 715827881 , Hash: 1 ], [Subvol_name:
>>>>>> glusterfsProd-disperse-5, Err: -1 , Start: 715827882 , Stop:
>>>>>> 1073741822 , Hash
>>>> : 1 ], [Subvol_name: glusterfsProd-disperse-6, Err: -1 , Start: 1073741823 , Stop: 1431655763 , Hash: 1 ], [Subvol_name: glusterfsProd-disperse-7, Err: -1 , Start: 1431655764 , Stop: 1789569704 , Hash: 1 ], [Subvol_name: glusterfsProd-disperse-8, Err: -1 , Start: 1789569705 , Stop: 2147483645 , Hash: 1 ], [Subvol_name:
> glusterfsProd-disperse-9, Err: -1 , Start: 2147483646 , Stop: 2505397586
> , Hash: 1 ],
>>>>>>
>>>>>>           Self-heal seems to be triggered for path  /Folder_01.05.2017_21.15/CV_MAGNETIC/V_30970/CHUNK_390607 due to anomalies as per DHT.  It would be great if someone could explain what could be the anomaly here.  The setup where we encountered this is a fairly stable setup with no brick failures or no node failures.
>>>>>
>>>>> This is not really a self-heal, at least from the point of view of ec. This means that DHT has found a discrepancy in the layout of that directory, however this doesn't mean any problem (notice the 'I' in the log, meaning that it's informative, not a warning nor error).
>>>>>
>>>>> Not sure how DHT works in this case or why it finds this "anomaly", but if there aren't any previous errors before that message, it can be completely ignored.
>>>>>
>>>>> Not sure if it can be related to option cluster.weighted-rebalance that is enabled by default.
>>>>>
>>>>>>
>>>>>>          Then Self-heal seems to have encountered the following error.
>>>>>>
>>>>>> [2017-01-12 20:48:23.418432] I [dict.c:166:key_value_cmp]
>>>>>> 0-glusterfsProd-disperse-2: 'trusted.ec.version' is different in two
>>>>>> dicts (16, 16)
>>>>>> [2017-01-12 20:48:23.418496] I [dict.c:3065:dict_dump_to_log]
>>>>>> 0-glusterfsProd-disperse-2: dict=0x7f0b649520ac
>>>>>> ((trusted.glusterfs.dht:0:0:0:1:0:0:0:0:0:0:0:0:15:55:55:54:)(trusted
>>>>>> .ec.version:0:0:0:0:0:0:0:b:0:0:0:0:0:0:0:e:))
>>>>>> [2017-01-12 20:48:23.418519] I [dict.c:3065:dict_dump_to_log]
>>>>>> 0-glusterfsProd-disperse-2: dict=0x7f0b6495b4e0
>>>>>> ((trusted.glusterfs.dht:0:0:0:1:0:0:0:0:0:0:0:0:15:55:55:54:)(trusted
>>>>>> .ec.version:0:0:0:0:0:0:0:d:0:0:0:0:0:0:0:e:))
>>>>>> [2017-01-12 20:48:23.418531] W [MSGID: 122056] [ec-combine.c:873:ec_combine_check] 0-glusterfsProd-disperse-2: Mismatching xdata in answers of 'LOOKUP'
>>>>>
>>>>> That's a real problem. Here we have two bricks that differ in the trusted.ec.version xattr. However this xattr not necessarily belongs to the previous directory. They are unrelated messages.
>>>>>
>>>>>>
>>>>>>            In this case glusterfsProd-disperse-2 sub volume actually consists of the following bricks.
>>>>>>            glusterfs4sds:/ws/disk11/ws_brick, glusterfs5sds:
>>>>>> /ws/disk11/ws_brick, glusterfs6sds: /ws/disk11/ws_brick
>>>>>>
>>>>>>            I went ahead and checked the value of trusted.ec.version on all the 3 bricks inside this sub vol:
>>>>>>
>>>>>>            [root@glusterfs6 ~]# getfattr -e hex -n trusted.ec.version /ws/disk11/ws_brick//Folder_01.05.2017_21.15/CV_MAGNETIC/V_30970/CHUNK_390607
>>>>>>            # file: ws/disk11/ws_brick//Folder_01.05.2017_21.15/CV_MAGNETIC/V_30970/CHUNK_390607
>>>>>>            trusted.ec.version=0x0000000000000009000000000000000b
>>>>>>
>>>>>>            [root@glusterfs4 ~]# getfattr -e hex -n trusted.ec.version /ws/disk11/ws_brick//Folder_01.05.2017_21.15/CV_MAGNETIC/V_30970/CHUNK_390607
>>>>>>            # file: ws/disk11/ws_brick//Folder_01.05.2017_21.15/CV_MAGNETIC/V_30970/CHUNK_390607
>>>>>>             trusted.ec.version=0x0000000000000009000000000000000b
>>>>>>
>>>>>>             [root@glusterfs5 glusterfs]# getfattr -e hex -n trusted.ec.version /ws/disk11/ws_brick//Folder_01.05.2017_21.15/CV_MAGNETIC/V_30970/CHUNK_390607
>>>>>>             # file: ws/disk11/ws_brick//Folder_01.05.2017_21.15/CV_MAGNETIC/V_30970/CHUNK_390607
>>>>>>             trusted.ec.version=0x0000000000000009000000000000000b
>>>>>>
>>>>>> The attribute value seems to be same on all the 3 bricks.
>>>>>
>>>>> That's a clear indication that the ec warning is not related to this directory because trusted.ec.version always increases, never decreases, and the directory has a value smaller that the one that appears in the log message.
>>>>>
>>>>> If you show all dict entries in the log, it seems that it does refer to a directory because trusted.ec.size is not present, but it must be another directory than the one you looked at. We would need to find which one is having this issue. The TRACE log would be helpful here.
>>>>>
>>>>>
>>>>>>
>>>>>>              Also please note that every single time that the trusted.ec.version was found to mismatch the  same values are getting logged. Following are 2 more instances of trusted.ec.version mismatch.
>>>>>>
>>>>>> [2017-01-12 20:14:25.554540] I [dict.c:166:key_value_cmp]
>>>>>> 0-glusterfsProd-disperse-2: 'trusted.ec.version' is different in two
>>>>>> dicts (16, 16)
>>>>>> [2017-01-12 20:14:25.554588] I [dict.c:3065:dict_dump_to_log]
>>>>>> 0-glusterfsProd-disperse-2: dict=0x7f0b6495a9f0
>>>>>> ((glusterfs.open-fd-count:30:0:)(trusted.glusterfs.dht:0:0:0:1:0:0:0:
>>>>>> 0:0:0:0:0:15:55:55:54:)(trusted.ec.version:0:0:0:0:0:0:0:d:0:0:0:0:0:
>>>>>> 0:0:e:))
>>>>>> [2017-01-12 20:14:25.554608] I [dict.c:3065:dict_dump_to_log]
>>>>>> 0-glusterfsProd-disperse-2: dict=0x7f0b6495903c
>>>>>> ((glusterfs.open-fd-count:30:0:)(trusted.glusterfs.dht:0:0:0:1:0:0:0:
>>>>>> 0:0:0:0:0:15:55:55:54:)(trusted.ec.version:0:0:0:0:0:0:0:b:0:0:0:0:0:
>>>>>> 0:0:e:))
>>>>>> [2017-01-12 20:14:25.554624] W [MSGID: 122053]
>>>>>> [ec-common.c:116:ec_check_status] 0-glusterfsProd-disperse-2:
>>>>>> Operation failed on some subvolumes (up=7, mask=7, remaining=0,
>>>>>> good=3, bad=4)
>>>>>> [2017-01-12 20:14:25.554632] W [MSGID: 122002]
>>>>>> [ec-common.c:71:ec_heal_report] 0-glusterfsProd-disperse-2: Heal
>>>>>> failed [Invalid argument]
>>>>>> [2017-01-12 20:14:25.555598] I [dict.c:166:key_value_cmp]
>>>>>> 0-glusterfsProd-disperse-2: 'trusted.ec.version' is different in two
>>>>>> dicts (16, 16)
>>>>>> [2017-01-12 20:14:25.555622] I [dict.c:3065:dict_dump_to_log]
>>>>>> 0-glusterfsProd-disperse-2: dict=0x7f0b64956c24
>>>>>> ((glusterfs.open-fd-count:30:0:)(trusted.glusterfs.dht:0:0:0:1:0:0:0:
>>>>>> 0:0:0:0:0:15:55:55:54:)(trusted.ec.version:0:0:0:0:0:0:0:b:0:0:0:0:0:
>>>>>> 0:0:e:))
>>>>>> [2017-01-12 20:14:25.555638] I [dict.c:3065:dict_dump_to_log]
>>>>>> 0-glusterfsProd-disperse-2: dict=0x7f0b64964e8c
>>>>>> ((glusterfs.open-fd-count:30:0:)(trusted.glusterfs.dht:0:0:0:1:0:0:0:
>>>>>> 0:0:0:0:0:15:55:55:54:)(trusted.ec.version:0:0:0:0:0:0:0:d:0:0:0:0:0:
>>>>>> 0:0:e:))
>>>>>
>>>>>
>>>>> I think that this refers to the same directory. This seems an attempt to heal it that has failed. So it makes sense that it finds exactly the same values.
>>>>>
>>>>>>
>>>>>>
>>>>>> In glustershd.log lot of similar errors are logged.
>>>>>>
>>>>>> [2017-01-12 21:10:53.728770] I [dict.c:166:key_value_cmp]
>>>>>> 0-glusterfsProd-disperse-0: 'trusted.ec.size' is different in two
>>>>>> dicts (8, 8)
>>>>>> [2017-01-12 21:10:53.728804] I [dict.c:3065:dict_dump_to_log]
>>>>>> 0-glusterfsProd-disperse-0: dict=0x7f21694b6f50
>>>>>> ((trusted.ec.size:0:0:0:0:42:3a:0:0:)(trusted.ec.version:0:0:0:0:0:0:
>>>>>> 37:5f:0:0:0:0:0:0:37:5f:))
>>>>>> [2017-01-12 21:10:53.728827] I [dict.c:3065:dict_dump_to_log]
>>>>>> 0-glusterfsProd-disperse-0: dict=0x7f21694b62bc
>>>>>> ((trusted.ec.size:0:0:0:0:0:ca:0:0:)(trusted.ec.version:0:0:0:0:0:0:0
>>>>>> :a1:0:0:0:0:0:0:37:5f:))
>>>>>> [2017-01-12 21:10:53.728842] W [MSGID: 122056] [ec-combine.c:873:ec_combine_check] 0-glusterfsProd-disperse-0: Mismatching xdata in answers of 'LOOKUP'
>>>>>> [2017-01-12 21:10:53.728854] W [MSGID: 122053]
>>>>>> [ec-common.c:116:ec_check_status] 0-glusterfsProd-disperse-0:
>>>>>> Operation failed on some subvolumes (up=7, mask=7, remaining=0,
>>>>>> good=6, bad=1)
>>>>>> [2017-01-12 21:10:53.728876] W [MSGID: 122002]
>>>>>> [ec-common.c:71:ec_heal_report] 0-glusterfsProd-disperse-0: Heal
>>>>>> failed [Invalid argument]
>>>>>
>>>>> This seems an attempt to heal a file, but I see a lot of differences between both versions. The size on one brick is 13.238.272 bytes, but on the other brick it's 1.111.097.344 bytes. That's a huge difference.
>>>>>
>>>>> Looking at the trusted.ec.version, I see that the 'data' version is very different (from 161 to 14.175), however the metadata version is exactly the same. This really seems like a lot of writes while one brick was down (or disconnected for some reason, or writes failed for some reason). One brick has lost about 14.000
> writes of ~80KB.
>>>>>
>>>>> I think the most important thing right now would be to identify which files and directories are having these problems to be able to identify the cause. Again, the TRACE log will be really useful.
>>>>>
>>>>> Xavi
>>>>>
>>>>>>
>>>>>> Thanks and Regards,
>>>>>> Ram
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Xavier Hernandez [mailto:xhernandez@xxxxxxxxxx]
>>>>>> Sent: Thursday, January 12, 2017 6:40 AM
>>>>>> To: Ankireddypalle Reddy
>>>>>> Cc: Gluster Devel (gluster-devel@xxxxxxxxxxx <mailto:gluster-devel@xxxxxxxxxxx>);
>>>>>> gluster-users@xxxxxxxxxxx <mailto:gluster-users@xxxxxxxxxxx>
>>>>>> Subject: Re: [Gluster-users] [Gluster-devel] Lot of EIO errors in
>>>>>> disperse volume
>>>>>>
>>>>>> Hi Ram,
>>>>>>
>>>>>>
>>>>>>> On 12/01/17 11:49, Ankireddypalle Reddy wrote:
>>>>>>> Xavi,
>>>>>>>         As I mentioned before the error could happen for any FOP. Will try to run with TRACE debug level. Is there a possibility that we are checking for this attribute on a directory, because a directory does not seem to be having this attribute set.
>>>>>>
>>>>>> No, directories do not have this attribute and no one should be reading it from a directory.
>>>>>>
>>>>>>> Also is the function to check size and version called after it is decided that heal should be run or is this check is the one which decides whether a heal should be run.
>>>>>>
>>>>>> Almost all checks that trigger a heal are done in the lookup fop when some discrepancy is detected.
>>>>>>
>>>>>> The function that checks size and version is called later once a lock on the inode is acquired (even if no heal is needed). However further failures in the processing of any fop can also trigger a self-heal.
>>>>>>
>>>>>> Xavi
>>>>>>
>>>>>>>
>>>>>>> Thanks and Regards,
>>>>>>> Ram
>>>>>>>
>>>>>>> Sent from my iPhone
>>>>>>>
>>>>>>>> On Jan 12, 2017, at 2:25 AM, Xavier Hernandez <xhernandez@xxxxxxxxxx <mailto:xhernandez@xxxxxxxxxx>> wrote:
>>>>>>>>
>>>>>>>> Hi Ram,
>>>>>>>>
>>>>>>>>> On 12/01/17 02:36, Ankireddypalle Reddy wrote:
>>>>>>>>> Xavi,
>>>>>>>>>        I added some more logging information. The trusted.ec.size field values are in fact different.
>>>>>>>>>         trusted.ec.size    l1 = 62719407423488    l2 = 0
>>>>>>>>
>>>>>>>> That's very weird. Directories do not have this attribute. It's only present on regular files. But you said that the error happens while creating the file, so it doesn't make much sense because file creation always sets trusted.ec.size to 0.
>>>>>>>>
>>>>>>>> Could you reproduce the problem with diagnostics.client-log-level set to TRACE and send the log to me ? it will create a big log, but I'll have much more information about what's going on.
>>>>>>>>
>>>>>>>> Do you have a mixed setup with nodes of different types ? for example mixed 32/64 bits architectures or different operating systems ? I ask this because 62719407423488 in hex is 0x390B00000000, which has the lower 32 bits set to 0, but has garbage above that.
>>>>>>>>
>>>>>>>>>
>>>>>>>>>         This is a fairly static setup with no brick/ node failure.  Please explain why  is that a heal is being triggered and what could have acutually caused these size xattrs to differ.  This is causing random I/O failures and is impacting the backup schedules.
>>>>>>>>
>>>>>>>> The launch of self-heal is normal because it has detected an inconsistency. The real problem is what originates that inconsistency.
>>>>>>>>
>>>>>>>> Xavi
>>>>>>>>
>>>>>>>>>
>>>>>>>>> [ 2017-01-12 01:19:18.256970] W [MSGID: 122056] [ec-combine.c:873:ec_combine_check] 0-glusterfsProd-disperse-8: Mismatching xdata in answers of 'LOOKUP'
>>>>>>>>> [2017-01-12 01:19:18.257015] W [MSGID: 122053]
>>>>>>>>> [ec-common.c:116:ec_check_status] 0-glusterfsProd-disperse-8:
>>>>>>>>> Operation failed on some subvolumes (up=7, mask=7, remaining=0,
>>>>>>>>> good=3, bad=4)
>>>>>>>>> [2017-01-12 01:19:18.257018] W [MSGID: 122002]
>>>>>>>>> [ec-common.c:71:ec_heal_report] 0-glusterfsProd-disperse-8: Heal
>>>>>>>>> failed [Invalid argument]
>>>>>>>>> [2017-01-12 01:19:21.002028] E [dict.c:197:key_value_cmp]
>>>>>>>>> 0-glusterfsProd-disperse-4: 'trusted.ec.size' is different in two
>>>>>>>>> dicts (8, 8)
>>>>>>>>> [2017-01-12 01:19:21.002056] E [dict.c:166:log_value]
>>>>>>>>> 0-glusterfsProd-disperse-4: trusted.ec.size [ l1 = 62719407423488
>>>>>>>>> l2 = 0 i1 = 0 i2 = 0 ]
>>>>>>>>> [2017-01-12 01:19:21.002064] W [MSGID: 122056] [ec-combine.c:873:ec_combine_check] 0-glusterfsProd-disperse-4: Mismatching xdata in answers of 'LOOKUP'
>>>>>>>>> [2017-01-12 01:19:21.209640] E [dict.c:197:key_value_cmp]
>>>>>>>>> 0-glusterfsProd-disperse-4: 'trusted.ec.size' is different in two
>>>>>>>>> dicts (8, 8)
>>>>>>>>> [2017-01-12 01:19:21.209673] E [dict.c:166:log_value]
>>>>>>>>> 0-glusterfsProd-disperse-4: trusted.ec.size [ l1 = 62719407423488
>>>>>>>>> l2 = 0 i1 = 0 i2 = 0 ]
>>>>>>>>> [2017-01-12 01:19:21.209686] W [MSGID: 122056] [ec-combine.c:873:ec_combine_check] 0-glusterfsProd-disperse-4: Mismatching xdata in answers of 'LOOKUP'
>>>>>>>>> [2017-01-12 01:19:21.209719] W [MSGID: 122053]
>>>>>>>>> [ec-common.c:116:ec_check_status] 0-glusterfsProd-disperse-4:
>>>>>>>>> Operation failed on some subvolumes (up=7, mask=7, remaining=0,
>>>>>>>>> good=6, bad=1)
>>>>>>>>> [2017-01-12 01:19:21.209753] W [MSGID: 122002]
>>>>>>>>> [ec-common.c:71:ec_heal_report] 0-glusterfsProd-disperse-4: Heal
>>>>>>>>> failed [Invalid argument]
>>>>>>>>>
>>>>>>>>> Thanks and Regards,
>>>>>>>>> Ram
>>>>>>>>>
>>>>>>>>> -----Original Message-----
>>>>>>>>> From: Ankireddypalle Reddy
>>>>>>>>> Sent: Wednesday, January 11, 2017 9:29 AM
>>>>>>>>> To: Ankireddypalle Reddy; Xavier Hernandez; Gluster Devel
>>>>>>>>> (gluster-devel@xxxxxxxxxxx <mailto:gluster-devel@xxxxxxxxxxx>);
> gluster-users@xxxxxxxxxxx <mailto:gluster-users@xxxxxxxxxxx>
>>>>>>>>> Subject: RE:  [Gluster-devel] Lot of EIO errors in
>>>>>>>>> disperse volume
>>>>>>>>>
>>>>>>>>> Xavi,
>>>>>>>>>          I built a debug binary to log more information. This is what is getting logged. Looks like it is the attribute trusted.ec.size which is different among the bricks in a sub volume.
>>>>>>>>>
>>>>>>>>> In glustershd.log :
>>>>>>>>>
>>>>>>>>> [2017-01-11 14:19:45.023845] N [MSGID: 122029] [ec-generic.c:683:ec_combine_lookup] 0-glusterfsProd-disperse-8: Mismatching iatt in answers of 'GF_FOP_LOOKUP'
>>>>>>>>> [2017-01-11 14:19:45.027718] E [dict.c:166:key_value_cmp]
>>>>>>>>> 0-glusterfsProd-disperse-6: 'trusted.ec.size' is different in two
>>>>>>>>> dicts (8, 8)
>>>>>>>>> [2017-01-11 14:19:45.027736] W [MSGID: 122056] [ec-combine.c:873:ec_combine_check] 0-glusterfsProd-disperse-6: Mismatching xdata in answers of 'LOOKUP'
>>>>>>>>> [2017-01-11 14:19:45.027763] E [dict.c:166:key_value_cmp]
>>>>>>>>> 0-glusterfsProd-disperse-6: 'trusted.ec.size' is different in two
>>>>>>>>> dicts (8, 8)
>>>>>>>>> [2017-01-11 14:19:45.027781] W [MSGID: 122056] [ec-combine.c:873:ec_combine_check] 0-glusterfsProd-disperse-6: Mismatching xdata in answers of 'LOOKUP'
>>>>>>>>> [2017-01-11 14:19:45.027793] W [MSGID: 122053]
>>>>>>>>> [ec-common.c:116:ec_check_status] 0-glusterfsProd-disperse-6:
>>>>>>>>> Operation failed on some subvolumes (up=7, mask=7, remaining=0,
>>>>>>>>> good=6, bad=1)
>>>>>>>>> [2017-01-11 14:19:45.027815] W [MSGID: 122002]
>>>>>>>>> [ec-common.c:71:ec_heal_report] 0-glusterfsProd-disperse-6: Heal
>>>>>>>>> failed [Invalid argument]
>>>>>>>>> [2017-01-11 14:19:45.029035] E [dict.c:166:key_value_cmp]
>>>>>>>>> 0-glusterfsProd-disperse-8: 'trusted.ec.size' is different in two
>>>>>>>>> dicts (8, 8)
>>>>>>>>> [2017-01-11 14:19:45.029057] W [MSGID: 122056] [ec-combine.c:873:ec_combine_check] 0-glusterfsProd-disperse-8: Mismatching xdata in answers of 'LOOKUP'
>>>>>>>>> [2017-01-11 14:19:45.029089] E [dict.c:166:key_value_cmp]
>>>>>>>>> 0-glusterfsProd-disperse-8: 'trusted.ec.size' is different in two
>>>>>>>>> dicts (8, 8)
>>>>>>>>> [2017-01-11 14:19:45.029105] W [MSGID: 122056] [ec-combine.c:873:ec_combine_check] 0-glusterfsProd-disperse-8: Mismatching xdata in answers of 'LOOKUP'
>>>>>>>>> [2017-01-11 14:19:45.029121] W [MSGID: 122053]
>>>>>>>>> [ec-common.c:116:ec_check_status] 0-glusterfsProd-disperse-8:
>>>>>>>>> Operation failed on some subvolumes (up=7, mask=7, remaining=0,
>>>>>>>>> good=6, bad=1)
>>>>>>>>> [2017-01-11 14:19:45.032566] E [dict.c:166:key_value_cmp]
>>>>>>>>> 0-glusterfsProd-disperse-6: 'trusted.ec.size' is different in two
>>>>>>>>> dicts (8, 8)
>>>>>>>>> [2017-01-11 14:19:45.029138] W [MSGID: 122002]
>>>>>>>>> [ec-common.c:71:ec_heal_report] 0-glusterfsProd-disperse-8: Heal
>>>>>>>>> failed [Invalid argument]
>>>>>>>>> [2017-01-11 14:19:45.032585] W [MSGID: 122056] [ec-combine.c:873:ec_combine_check] 0-glusterfsProd-disperse-6: Mismatching xdata in answers of 'LOOKUP'
>>>>>>>>> [2017-01-11 14:19:45.032614] E [dict.c:166:key_value_cmp]
>>>>>>>>> 0-glusterfsProd-disperse-6: 'trusted.ec.size' is different in two
>>>>>>>>> dicts (8, 8)
>>>>>>>>> [2017-01-11 14:19:45.032631] W [MSGID: 122056] [ec-combine.c:873:ec_combine_check] 0-glusterfsProd-disperse-6: Mismatching xdata in answers of 'LOOKUP'
>>>>>>>>> [2017-01-11 14:19:45.032638] W [MSGID: 122053]
>>>>>>>>> [ec-common.c:116:ec_check_status] 0-glusterfsProd-disperse-6:
>>>>>>>>> Operation failed on some subvolumes (up=7, mask=7, remaining=0,
>>>>>>>>> good=6, bad=1)
>>>>>>>>> [2017-01-11 14:19:45.032654] W [MSGID: 122002]
>>>>>>>>> [ec-common.c:71:ec_heal_report] 0-glusterfsProd-disperse-6: Heal
>>>>>>>>> failed [Invalid argument]
>>>>>>>>> [2017-01-11 14:19:45.037514] E [dict.c:166:key_value_cmp]
>>>>>>>>> 0-glusterfsProd-disperse-6: 'trusted.ec.size' is different in two
>>>>>>>>> dicts (8, 8)
>>>>>>>>> [2017-01-11 14:19:45.037536] W [MSGID: 122056] [ec-combine.c:873:ec_combine_check] 0-glusterfsProd-disperse-6: Mismatching xdata in answers of 'LOOKUP'
>>>>>>>>> [2017-01-11 14:19:45.037553] E [dict.c:166:key_value_cmp]
>>>>>>>>> 0-glusterfsProd-disperse-6: 'trusted.ec.size' is different in two
>>>>>>>>> dicts (8, 8)
>>>>>>>>> [2017-01-11 14:19:45.037573] W [MSGID: 122056] [ec-combine.c:873:ec_combine_check] 0-glusterfsProd-disperse-6: Mismatching xdata in answers of 'LOOKUP'
>>>>>>>>> [2017-01-11 14:19:45.037582] W [MSGID: 122053]
>>>>>>>>> [ec-common.c:116:ec_check_status] 0-glusterfsProd-disperse-6:
>>>>>>>>> Operation failed on some subvolumes (up=7, mask=7, remaining=0,
>>>>>>>>> good=6, bad=1)
>>>>>>>>> [2017-01-11 14:19:45.037599] W [MSGID: 122002]
>>>>>>>>> [ec-common.c:71:ec_heal_report] 0-glusterfsProd-disperse-6: Heal
>>>>>>>>> failed [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:40.001401] E [dict.c:166:key_value_cmp]
>>>>>>>>> 0-glusterfsProd-disperse-3: 'trusted.ec.size' is different in two
>>>>>>>>> dicts (8, 8)
>>>>>>>>> [2017-01-11 14:20:40.001387] E [dict.c:166:key_value_cmp]
>>>>>>>>> 0-glusterfsProd-disperse-5: 'trusted.ec.size' is different in two
>>>>>>>>> dicts (8, 8)
>>>>>>>>>
>>>>>>>>> In the mount daemon log:
>>>>>>>>>
>>>>>>>>> [2017-01-11 14:20:17.806826] E [MSGID: 122001]
>>>>>>>>> [ec-common.c:872:ec_config_check] 2-glusterfsProd-disperse-0:
>>>>>>>>> Invalid or corrupted config [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.806847] E [MSGID: 122066]
>>>>>>>>> [ec-common.c:969:ec_prepare_update_cbk] 2-glusterfsProd-disperse-0:
>>>>>>>>> Invalid config xattr [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.807076] E [MSGID: 122001]
>>>>>>>>> [ec-common.c:872:ec_config_check] 2-glusterfsProd-disperse-1:
>>>>>>>>> Invalid or corrupted config [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.807099] E [MSGID: 122066]
>>>>>>>>> [ec-common.c:969:ec_prepare_update_cbk] 2-glusterfsProd-disperse-1:
>>>>>>>>> Invalid config xattr [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.807286] E [MSGID: 122001]
>>>>>>>>> [ec-common.c:872:ec_config_check] 2-glusterfsProd-disperse-10:
>>>>>>>>> Invalid or corrupted config [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.807298] E [MSGID: 122066]
>>>>>>>>> [ec-common.c:969:ec_prepare_update_cbk] 2-glusterfsProd-disperse-10:
>>>>>>>>> Invalid config xattr [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.807409] E [MSGID: 122001]
>>>>>>>>> [ec-common.c:872:ec_config_check] 2-glusterfsProd-disperse-11:
>>>>>>>>> Invalid or corrupted config [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.807420] E [MSGID: 122066]
>>>>>>>>> [ec-common.c:969:ec_prepare_update_cbk] 2-glusterfsProd-disperse-11:
>>>>>>>>> Invalid config xattr [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.807448] E [MSGID: 122001]
>>>>>>>>> [ec-common.c:872:ec_config_check] 2-glusterfsProd-disperse-4:
>>>>>>>>> Invalid or corrupted config [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.807462] E [MSGID: 122066]
>>>>>>>>> [ec-common.c:969:ec_prepare_update_cbk] 2-glusterfsProd-disperse-4:
>>>>>>>>> Invalid config xattr [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.807539] E [MSGID: 122001]
>>>>>>>>> [ec-common.c:872:ec_config_check] 2-glusterfsProd-disperse-2:
>>>>>>>>> Invalid or corrupted config [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.807550] E [MSGID: 122066]
>>>>>>>>> [ec-common.c:969:ec_prepare_update_cbk] 2-glusterfsProd-disperse-2:
>>>>>>>>> Invalid config xattr [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.807723] E [MSGID: 122001]
>>>>>>>>> [ec-common.c:872:ec_config_check] 2-glusterfsProd-disperse-3:
>>>>>>>>> Invalid or corrupted config [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.807739] E [MSGID: 122066]
>>>>>>>>> [ec-common.c:969:ec_prepare_update_cbk] 2-glusterfsProd-disperse-3:
>>>>>>>>> Invalid config xattr [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.807785] E [MSGID: 122001]
>>>>>>>>> [ec-common.c:872:ec_config_check] 2-glusterfsProd-disperse-5:
>>>>>>>>> Invalid or corrupted config [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.807796] E [MSGID: 122066]
>>>>>>>>> [ec-common.c:969:ec_prepare_update_cbk] 2-glusterfsProd-disperse-5:
>>>>>>>>> Invalid config xattr [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.808020] E [MSGID: 122001]
>>>>>>>>> [ec-common.c:872:ec_config_check] 2-glusterfsProd-disperse-9:
>>>>>>>>> Invalid or corrupted config [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.808034] E [MSGID: 122066]
>>>>>>>>> [ec-common.c:969:ec_prepare_update_cbk] 2-glusterfsProd-disperse-9:
>>>>>>>>> Invalid config xattr [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.808054] E [MSGID: 122001]
>>>>>>>>> [ec-common.c:872:ec_config_check] 2-glusterfsProd-disperse-6:
>>>>>>>>> Invalid or corrupted config [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.808066] E [MSGID: 122066]
>>>>>>>>> [ec-common.c:969:ec_prepare_update_cbk] 2-glusterfsProd-disperse-6:
>>>>>>>>> Invalid config xattr [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.808282] E [MSGID: 122001]
>>>>>>>>> [ec-common.c:872:ec_config_check] 2-glusterfsProd-disperse-8:
>>>>>>>>> Invalid or corrupted config [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.808292] E [MSGID: 122066]
>>>>>>>>> [ec-common.c:969:ec_prepare_update_cbk] 2-glusterfsProd-disperse-8:
>>>>>>>>> Invalid config xattr [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.809212] E [MSGID: 122001]
>>>>>>>>> [ec-common.c:872:ec_config_check] 2-glusterfsProd-disperse-7:
>>>>>>>>> Invalid or corrupted config [Invalid argument]
>>>>>>>>> [2017-01-11 14:20:17.809228] E [MSGID: 122066]
>>>>>>>>> [ec-common.c:969:ec_prepare_update_cbk] 2-glusterfsProd-disperse-7:
>>>>>>>>> Invalid config xattr [Invalid argument]
>>>>>>>>>
>>>>>>>>> [2017-01-11 14:20:17.812660] I [MSGID: 109036]
>>>>>>>>> [dht-common.c:8043:dht_log_new_layout_for_dir_selfheal]
>>>>>>>>> 2-glusterfsProd-dht: Setting layout of
>>>>>>>>> /Folder_01.05.2017_21.15/CV_MAGNETIC/V_31500/CHUNK_402578 with
>>>>>>>>> [Subvol_name: glusterfsProd-disperse-0, Err: -1 , Start:
>>>>>>>>> 1789569705 , Stop: 2147483645 , Hash: 1 ], [Subvol_name:
>>>>>>>>> glusterfsProd-disperse-1, Err: -1 , Start: 2147483646 , Stop:
>>>>>>>>> 2505397586 , Hash: 1 ], [Subvol_name: glusterfsProd-disperse-10,
>>>>>>>>> Err: -1 , Start: 2505397587 , Stop: 2863311527 , Hash: 1 ],
>>>>>>>>> [Subvol_name: glusterfsProd-disperse-11, Err: -1 , Start:
>>>>>>>>> 2863311528 , Stop: 3221225468 , Hash: 1 ], [Subvol_name:
>>>>>>>>> glusterfsProd-disperse-2, Err: -1 , Start: 3221225469 , Stop:
>>>>>>>>> 3579139409 , Hash: 1 ], [Subvol_name: glusterfsProd-disperse-3, Err:
>>>>>>>>> -1 , Start: 3579139410 , Stop: 3937053350 , Hash: 1 ], [Subvol_name:
>>>>>>>>> glusterfsProd-disperse-4, Err: -1 , Start: 3937053351 , Stop:
>>>>>>>>> 4294967295 , Hash: 1 ], [Subvol_name: glusterfsProd-disperse-5, Err:
>>>>>>>>> -1 , Start: 0 , Stop: 357913940 , Hash: 1 ], [Subvol_name:
>>>>>>>>> glusterfsProd-disperse-6, Err: -1 , Start: 357913941 , Stop:
>>>>>>>>> 715827881 , Hash: 1 ], [Subvol_name: glusterfsProd-disperse-7, Err:
>>>>>>>>> -1 , Start: 715827882 , Stop: 1073741822 , Hash: 1 ], [Subvol_name:
>>>>>>>>> glusterfsProd-disperse-8, Err: -1 , Start: 1073741823 , Stop:
>>>>>>>>> 1431655763 , Hash: 1 ], [Subvol_name: glusterfsProd-disperse-9, Err:
>>>>>>>>> -1 , Start: 1431655764 , Stop: 1789569704 , Hash: 1 ],
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> -----Original Message-----
>>>>>>>>> From: gluster-users-bounces@xxxxxxxxxxx <mailto:gluster-users-bounces@xxxxxxxxxxx>
>>>>>>>>> [mailto:gluster-users-bounces@xxxxxxxxxxx] On Behalf Of
>>>>>>>>> Ankireddypalle Reddy
>>>>>>>>> Sent: Tuesday, January 10, 2017 10:09 AM
>>>>>>>>> To: Xavier Hernandez; Gluster Devel (gluster-devel@xxxxxxxxxxx <mailto:gluster-devel@xxxxxxxxxxx>);
>>>>>>>>> gluster-users@xxxxxxxxxxx <mailto:gluster-users@xxxxxxxxxxx>
>>>>>>>>> Subject: Re: [Gluster-users] [Gluster-devel] Lot of EIO errors in
>>>>>>>>> disperse volume
>>>>>>>>>
>>>>>>>>> Xavi,
>>>>>>>>>         In this case it's the file creation which failed. So I provided the xattrs of the parent.
>>>>>>>>>
>>>>>>>>> Thanks and Regards,
>>>>>>>>> Ram
>>>>>>>>>
>>>>>>>>> -----Original Message-----
>>>>>>>>> From: Xavier Hernandez [mailto:xhernandez@xxxxxxxxxx]
>>>>>>>>> Sent: Tuesday, January 10, 2017 9:10 AM
>>>>>>>>> To: Ankireddypalle Reddy; Gluster Devel
>>>>>>>>> (gluster-devel@xxxxxxxxxxx <mailto:gluster-devel@xxxxxxxxxxx>);
> gluster-users@xxxxxxxxxxx <mailto:gluster-users@xxxxxxxxxxx>
>>>>>>>>> Subject: Re: [Gluster-devel] Lot of EIO errors in disperse volume
>>>>>>>>>
>>>>>>>>> Hi Ram,
>>>>>>>>>
>>>>>>>>>> On 10/01/17 14:42, Ankireddypalle Reddy wrote:
>>>>>>>>>> Attachments (2):
>>>>>>>>>>
>>>>>>>>>> 1
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> ec.txt
>>>>>>>>>> <https://imap.commvault.com/webconsole/embedded.do?url="">> <https://imap.commvault.com/webconsole/embedded.do?url="">> ap
>>>>>>>>>> .co
>>>>>>>>>> mmvault.com/webconsole/api/drive/publicshare/346714/file/ee2d1536
>>>>>>>>>> c2
>>>>>>>>>> dc4
>>>>>>>>>> dff94afb12132b4f8f6/action/preview&downloadUrl=https://imap.commvault.
>>>>>>>>>> com/webconsole/api/contentstore/publicshare/346714/file/ee2d1536c
>>>>>>>>>> 2d c4d ff94afb12132b4f8f6/action/download>
>>>>>>>>>> [Download]
>>>>>>>>>> <https://imap.commvault.com/webconsole/api/contentstore/publicsha
> <https://imap.commvault.com/webconsole/api/contentstore/publicsha%0b>>>>>>>>>>
> re
>>>>>>>>>> /34
>>>>>>>>>> 6714/file/ee2d1536c2dc4dff94afb12132b4f8f6/action/download>(11.50
>>>>>>>>>> KB)
>>>>>>>>>>
>>>>>>>>>> 2
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> ws-glus.log
>>>>>>>>>> <https://imap.commvault.com/webconsole/embedded.do?url="">> <https://imap.commvault.com/webconsole/embedded.do?url="">> ap
>>>>>>>>>> .co
>>>>>>>>>> mmvault.com/webconsole/api/drive/publicshare/346714/file/cff3e050
>>>>>>>>>> 6e
>>>>>>>>>> 754
>>>>>>>>>> b9a939db02da1cbbd58/action/preview&downloadUrl=https://imap.commvault.
>>>>>>>>>> com/webconsole/api/contentstore/publicshare/346714/file/cff3e0506
>>>>>>>>>> e7 54b 9a939db02da1cbbd58/action/download>
>>>>>>>>>> [Download]
>>>>>>>>>> <https://imap.commvault.com/webconsole/api/contentstore/publicsha
> <https://imap.commvault.com/webconsole/api/contentstore/publicsha%0b>>>>>>>>>>
> re
>>>>>>>>>> /34
>>>>>>>>>> 6714/file/cff3e0506e754b9a939db02da1cbbd58/action/download>(3.48
>>>>>>>>>> MB)
>>>>>>>>>>
>>>>>>>>>> Xavi,
>>>>>>>>>>        We are encountering errors for different kinds of FOPS.
>>>>>>>>>>        The open failed for the following file:
>>>>>>>>>>
>>>>>>>>>>        cvd_2017_01_10_02_28_26.log:98182 1f9fe 01/10 00:57:10 8414465
>>>>>>>>>> [MEDIAFS    ] 20117519-52075477 SingleInstancer_FS::StartDataFile2:
>>>>>>>>>> Failed to create the data file
>>>>>>>>>> [/ws/glus/Folder_07.11.2016_23.02/CV_MAGNETIC/V_8854974/CHUNK_513
>>>>>>>>>> 42
>>>>>>>>>> 720 /SFILE_CONTAINER_062], error=0xECCC0005:{CQiFile::Open(92)} +
>>>>>>>>>> {CQiUTFOSAPI::open(96)/ErrNo.5.(Input/output error)-Open failed,
>>>>>>>>>> File=/ws/glus/Folder_07.11.2016_23.02/CV_MAGNETIC/V_8854974/CHUNK
>>>>>>>>>> _5
>>>>>>>>>> 134 2720/SFILE_CONTAINER_062, OperationFlag=0xC1,
>>>>>>>>>> PermissionMode=0x1FF}
>>>>>>>>>>
>>>>>>>>>>        I've attached the extended attributes for the directories
>>>>>>>>>>        /ws/glus/Folder_07.11.2016_23.02/CV_MAGNETIC/V_8854974/
>>>>>>>>>> and
>>>>>>>>>>
>>>>>>>>>> /ws/glus/Folder_07.11.2016_23.02/CV_MAGNETIC/V_8854974/CHUNK_5134
>>>>>>>>>> 27
>>>>>>>>>> 20
>>>>>>>>>> from all the bricks.
>>>>>>>>>>
>>>>>>>>>>       The attributes look fine to me. I've also attached some
>>>>>>>>>> log cuts to illustrate the problem.
>>>>>>>>>
>>>>>>>>> I need the extended attributes of the file itself, not the parent directories.
>>>>>>>>>
>>>>>>>>> Xavi
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Thanks and Regards,
>>>>>>>>>> Ram
>>>>>>>>>>
>>>>>>>>>> -----Original Message-----
>>>>>>>>>> From: Xavier Hernandez [mailto:xhernandez@xxxxxxxxxx]
>>>>>>>>>> Sent: Tuesday, January 10, 2017 7:53 AM
>>>>>>>>>> To: Ankireddypalle Reddy; Gluster Devel
>>>>>>>>>> (gluster-devel@xxxxxxxxxxx <mailto:gluster-devel@xxxxxxxxxxx>);
> gluster-users@xxxxxxxxxxx <mailto:gluster-users@xxxxxxxxxxx>
>>>>>>>>>> Subject: Re: [Gluster-devel] Lot of EIO errors in disperse volume
>>>>>>>>>>
>>>>>>>>>> Hi Ram,
>>>>>>>>>>
>>>>>>>>>> the error is caused by an extended attribute that does not match
>>>>>>>>>> on all
>>>>>>>>>> 3 bricks of the disperse set. Most probable value is
>>>>>>>>>> trusted.ec.version, but could be others.
>>>>>>>>>>
>>>>>>>>>> At first sight, I don't see any change from 3.7.8 that could have
>>>>>>>>>> caused this. I'll check again.
>>>>>>>>>>
>>>>>>>>>> What kind of operations are you doing ? this can help me narrow the search.
>>>>>>>>>>
>>>>>>>>>> Xavi
>>>>>>>>>>
>>>>>>>>>>> On 10/01/17 13:43, Ankireddypalle Reddy wrote:
>>>>>>>>>>> Xavi,
>>>>>>>>>>>        Thanks. If you could please explain what to look for in
>>>>>>>>>>> the
>>>>>>>>>> extended attributes then I will check and let you know if I find
>>>>>>>>>> anything suspicious.  Also we noticed that some of these
>>>>>>>>>> operations would succeed if retried. Do you know of any
>>>>>>>>>> communicated related errors that are being reported/triaged.
>>>>>>>>>>>
>>>>>>>>>>> Thanks and Regards,
>>>>>>>>>>> Ram
>>>>>>>>>>>
>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>> From: Xavier Hernandez [mailto:xhernandez@xxxxxxxxxx]
>>>>>>>>>>> Sent: Tuesday, January 10, 2017 7:23 AM
>>>>>>>>>>> To: Ankireddypalle Reddy; Gluster Devel
>>>>>>>>>>> (gluster-devel@xxxxxxxxxxx <mailto:gluster-devel@xxxxxxxxxxx>);
> gluster-users@xxxxxxxxxxx <mailto:gluster-users@xxxxxxxxxxx>
>>>>>>>>>>> Subject: Re: [Gluster-devel] Lot of EIO errors in disperse
>>>>>>>>>>> volume
>>>>>>>>>>>
>>>>>>>>>>> Hi Ram,
>>>>>>>>>>>
>>>>>>>>>>>> On 10/01/17 13:14, Ankireddypalle Reddy wrote:
>>>>>>>>>>>> Attachment (1):
>>>>>>>>>>>>
>>>>>>>>>>>> 1
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> ecxattrs.txt
>>>>>>>>>>>> <https://imap.commvault.com/webconsole/embedded.do?url="">> <https://imap.commvault.com/webconsole/embedded.do?url="">> c
>>>>>>>>>>>> o
>>>>>>>>>>>> mmvault.com/webconsole/api/drive/publicshare/346714/file/1272e6
>>>>>>>>>>>> 82
>>>>>>>>>>>> 787
>>>>>>>>>>>> 4
>>>>>>>>>>>> 4
>>>>>>>>>>>> f15bf1a54f2b31b559d/action/preview&downloadUrl=https://imap.commvault.
>>>>>>>>>>>> com/webconsole/api/contentstore/publicshare/346714/file/1272e68
>>>>>>>>>>>> 27
>>>>>>>>>>>> 874
>>>>>>>>>>>> 4
>>>>>>>>>>>> f
>>>>>>>>>>>> 15bf1a54f2b31b559d/action/download>
>>>>>>>>>>>> [Download]
>>>>>>>>>>>> <https://imap.commvault.com/webconsole/api/contentstore/publics
> <https://imap.commvault.com/webconsole/api/contentstore/publics%0b>>>>>>>>>>>>
> ha
>>>>>>>>>>>> re/
>>>>>>>>>>>> 3
>>>>>>>>>>>> 4
>>>>>>>>>>>> 6714/file/1272e68278744f15bf1a54f2b31b559d/action/download>(5.9
>>>>>>>>>>>> 2
>>>>>>>>>>>> KB)
>>>>>>>>>>>>
>>>>>>>>>>>> Xavi,
>>>>>>>>>>>>           Please find attached the extended attributes for a
>>>>>>>>>>>> directory from all the bricks. Free space check failed for this
>>>>>>>>>>>> with error number EIO.
>>>>>>>>>>>
>>>>>>>>>>> What do you mean ? what operation have you made to check the
>>>>>>>>>>> free
>>>>>>>>>> space on that directory ?
>>>>>>>>>>>
>>>>>>>>>>> If it's a recursive check, I need the extended attributes from
>>>>>>>>>>> the
>>>>>>>>>> exact file that triggers the EIO. The attached attributes seem
>>>>>>>>>> consistent and that directory shouldn't cause any problem. Does an 'ls'
>>>>>>>>>> on that directory fail or does it show the contents ?
>>>>>>>>>>>
>>>>>>>>>>> Xavi
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks and Regards,
>>>>>>>>>>>> Ram
>>>>>>>>>>>>
>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>> From: Xavier Hernandez [mailto:xhernandez@xxxxxxxxxx]
>>>>>>>>>>>> Sent: Tuesday, January 10, 2017 6:45 AM
>>>>>>>>>>>> To: Ankireddypalle Reddy; Gluster Devel
>>>>>>>>>>>> (gluster-devel@xxxxxxxxxxx <mailto:gluster-devel@xxxxxxxxxxx>);
> gluster-users@xxxxxxxxxxx <mailto:gluster-users@xxxxxxxxxxx>
>>>>>>>>>>>> Subject: Re: [Gluster-devel] Lot of EIO errors in disperse
>>>>>>>>>>>> volume
>>>>>>>>>>>>
>>>>>>>>>>>> Hi Ram,
>>>>>>>>>>>>
>>>>>>>>>>>> can you execute the following command on all bricks on a file
>>>>>>>>>>>> that is giving EIO ?
>>>>>>>>>>>>
>>>>>>>>>>>> getfattr -m. -e hex -d <path to file in brick>
>>>>>>>>>>>>
>>>>>>>>>>>> Xavi
>>>>>>>>>>>>
>>>>>>>>>>>>> On 10/01/17 12:41, Ankireddypalle Reddy wrote:
>>>>>>>>>>>>> Xavi,
>>>>>>>>>>>>>          We have been running 3.7.8 on these servers. We
>>>>>>>>>>>>> upgraded
>>>>>>>>>>>> to 3.7.18 yesterday. We upgraded all the servers at a time.
>>>>>>>>>>>> The volume was brought down during upgrade.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks and Regards,
>>>>>>>>>>>>> Ram
>>>>>>>>>>>>>
>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>> From: Xavier Hernandez [mailto:xhernandez@xxxxxxxxxx]
>>>>>>>>>>>>> Sent: Tuesday, January 10, 2017 6:35 AM
>>>>>>>>>>>>> To: Ankireddypalle Reddy; Gluster Devel
>>>>>>>>>>>>> (gluster-devel@xxxxxxxxxxx <mailto:gluster-devel@xxxxxxxxxxx>);
> gluster-users@xxxxxxxxxxx <mailto:gluster-users@xxxxxxxxxxx>
>>>>>>>>>>>>> Subject: Re: [Gluster-devel] Lot of EIO errors in disperse
>>>>>>>>>>>>> volume
>>>>>>>>>>>>>
>>>>>>>>>>>>> Hi Ram,
>>>>>>>>>>>>>
>>>>>>>>>>>>> how did you upgrade gluster ? from which version ?
>>>>>>>>>>>>>
>>>>>>>>>>>>> Did you upgrade one server at a time and waited until
>>>>>>>>>>>>> self-heal
>>>>>>>>>>>> finished before upgrading the next server ?
>>>>>>>>>>>>>
>>>>>>>>>>>>> Xavi
>>>>>>>>>>>>>
>>>>>>>>>>>>>> On 10/01/17 11:39, Ankireddypalle Reddy wrote:
>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>    We upgraded to GlusterFS 3.7.18 yesterday.  We see lot of
>>>>>>>>>>>>>> failures in our applications. Most of the errors are EIO. The
>>>>>>>>>>>>>> following log lines are commonly seen in the logs:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> The message "W [MSGID: 122056]
>>>>>>>>>>>>>> [ec-combine.c:873:ec_combine_check]
>>>>>>>>>>>>>> 0-StoragePool-disperse-4: Mismatching xdata in answers of 'LOOKUP'"
>>>>>>>>>>>>>> repeated 2 times between [2017-01-10 02:46:25.069809] and
>>>>>>>>>>>>>> [2017-01-10 02:46:25.069835]
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> [2017-01-10 02:46:25.069852] W [MSGID: 122056]
>>>>>>>>>>>>>> [ec-combine.c:873:ec_combine_check] 0-StoragePool-disperse-5:
>>>>>>>>>>>>>> Mismatching xdata in answers of 'LOOKUP'
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> The message "W [MSGID: 122056]
>>>>>>>>>>>>>> [ec-combine.c:873:ec_combine_check]
>>>>>>>>>>>>>> 0-StoragePool-disperse-5: Mismatching xdata in answers of 'LOOKUP'"
>>>>>>>>>>>>>> repeated 2 times between [2017-01-10 02:46:25.069852] and
>>>>>>>>>>>>>> [2017-01-10 02:46:25.069873]
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> [2017-01-10 02:46:25.069910] W [MSGID: 122056]
>>>>>>>>>>>>>> [ec-combine.c:873:ec_combine_check] 0-StoragePool-disperse-6:
>>>>>>>>>>>>>> Mismatching xdata in answers of 'LOOKUP'
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ...
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> [2017-01-10 02:46:26.520774] I [MSGID: 109036]
>>>>>>>>>>>>>> [dht-common.c:9076:dht_log_new_layout_for_dir_selfheal]
>>>>>>>>>>>>>> 0-StoragePool-dht: Setting layout of
>>>>>>>>>>>>>> /Folder_07.11.2016_23.02/CV_MAGNETIC/V_8854213/CHUNK_51334585
>>>>>>>>>>>>>> with
>>>>>>>>>>>>>> [Subvol_name: StoragePool-disperse-0, Err: -1 , Start:
>>>>>>>>>>>>>> 3221225466 ,
>>>>>>>>>>>>>> Stop: 3758096376 , Hash: 1 ], [Subvol_name:
>>>>>>>>>>>>>> StoragePool-disperse-1,
>>>>>>>>>> Err:
>>>>>>>>>>>>>> -1 , Start: 3758096377 , Stop: 4294967295 , Hash: 1 ], [Subvol_name:
>>>>>>>>>>>>>> StoragePool-disperse-2, Err: -1 , Start: 0 , Stop: 536870910 , Hash:
>>>>>>>>>>>>>> 1 ], [Subvol_name: StoragePool-disperse-3, Err: -1 , Start:
>>>>>>>>>>>>>> 536870911 ,
>>>>>>>>>>>>>> Stop: 1073741821 , Hash: 1 ], [Subvol_name:
>>>>>>>>>>>>>> StoragePool-disperse-4,
>>>>>>>>>> Err:
>>>>>>>>>>>>>> -1 , Start: 1073741822 , Stop: 1610612732 , Hash: 1 ], [Subvol_name:
>>>>>>>>>>>>>> StoragePool-disperse-5, Err: -1 , Start: 1610612733 , Stop:
>>>>>>>>>>>>>> 2147483643 ,
>>>>>>>>>>>>>> Hash: 1 ], [Subvol_name: StoragePool-disperse-6, Err: -1 , Start:
>>>>>>>>>>>>>> 2147483644 , Stop: 2684354554 , Hash: 1 ], [Subvol_name:
>>>>>>>>>>>>>> StoragePool-disperse-7, Err: -1 , Start: 2684354555 , Stop:
>>>>>>>>>>>>>> 3221225465 ,
>>>>>>>>>>>>>> Hash: 1 ],
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> [2017-01-10 02:46:26.522841] N [MSGID: 122031]
>>>>>>>>>>>>>> [ec-generic.c:1130:ec_combine_xattrop] 0-StoragePool-disperse-3:
>>>>>>>>>>>>>> Mismatching dictionary in answers of 'GF_FOP_XATTROP'
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> The message "N [MSGID: 122031]
>>>>>>>>>>>>>> [ec-generic.c:1130:ec_combine_xattrop]
>>>>>>>>>>>>>> 0-StoragePool-disperse-3: Mismatching dictionary in answers
>>>>>>>>>>>>>> of 'GF_FOP_XATTROP'" repeated 2 times between [2017-01-10
>>>>>>>>>>>>>> 02:46:26.522841] and [2017-01-10 02:46:26.522894]
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> [2017-01-10 02:46:26.522898] W [MSGID: 122040]
>>>>>>>>>>>>>> [ec-common.c:919:ec_prepare_update_cbk] 0-StoragePool-disperse-3:
>>>>>>>>>>>>>> Failed to get size and version [Input/output error]
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> [2017-01-10 02:46:26.523115] N [MSGID: 122031]
>>>>>>>>>>>>>> [ec-generic.c:1130:ec_combine_xattrop] 0-StoragePool-disperse-6:
>>>>>>>>>>>>>> Mismatching dictionary in answers of 'GF_FOP_XATTROP'
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> The message "N [MSGID: 122031]
>>>>>>>>>>>>>> [ec-generic.c:1130:ec_combine_xattrop]
>>>>>>>>>>>>>> 0-StoragePool-disperse-6: Mismatching dictionary in answers
>>>>>>>>>>>>>> of 'GF_FOP_XATTROP'" repeated 2 times between [2017-01-10
>>>>>>>>>>>>>> 02:46:26.523115] and [2017-01-10 02:46:26.523143]
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> [2017-01-10 02:46:26.523147] W [MSGID: 122040]
>>>>>>>>>>>>>> [ec-common.c:919:ec_prepare_update_cbk] 0-StoragePool-disperse-6:
>>>>>>>>>>>>>> Failed to get size and version [Input/output error]
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> [2017-01-10 02:46:26.523302] N [MSGID: 122031]
>>>>>>>>>>>>>> [ec-generic.c:1130:ec_combine_xattrop] 0-StoragePool-disperse-2:
>>>>>>>>>>>>>> Mismatching dictionary in answers of 'GF_FOP_XATTROP'
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> The message "N [MSGID: 122031]
>>>>>>>>>>>>>> [ec-generic.c:1130:ec_combine_xattrop]
>>>>>>>>>>>>>> 0-StoragePool-disperse-2: Mismatching dictionary in answers
>>>>>>>>>>>>>> of 'GF_FOP_XATTROP'" repeated 2 times between [2017-01-10
>>>>>>>>>>>>>> 02:46:26.523302] and [2017-01-10 02:46:26.523324]
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> [2017-01-10 02:46:26.523328] W [MSGID: 122040]
>>>>>>>>>>>>>> [ec-common.c:919:ec_prepare_update_cbk] 0-StoragePool-disperse-2:
>>>>>>>>>>>>>> Failed to get size and version [Input/output error]
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> [root@glusterfs3 Log_Files]# gluster --version
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> glusterfs 3.7.18 built on Dec  8 2016 06:34:26
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> [root@glusterfs3 Log_Files]# gluster volume info
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Volume Name: StoragePool
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Type: Distributed-Disperse
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Volume ID: 149e976f-4e21-451c-bf0f-f5691208531f
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Status: Started
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Number of Bricks: 8 x (2 + 1) = 24
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Transport-type: tcp
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Bricks:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick1: glusterfs1sds:/ws/disk1/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick2: glusterfs2sds:/ws/disk1/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick3: glusterfs3sds:/ws/disk1/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick4: glusterfs1sds:/ws/disk2/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick5: glusterfs2sds:/ws/disk2/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick6: glusterfs3sds:/ws/disk2/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick7: glusterfs1sds:/ws/disk3/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick8: glusterfs2sds:/ws/disk3/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick9: glusterfs3sds:/ws/disk3/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick10: glusterfs1sds:/ws/disk4/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick11: glusterfs2sds:/ws/disk4/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick12: glusterfs3sds:/ws/disk4/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick13: glusterfs1sds:/ws/disk5/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick14: glusterfs2sds:/ws/disk5/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick15: glusterfs3sds:/ws/disk5/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick16: glusterfs1sds:/ws/disk6/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick17: glusterfs2sds:/ws/disk6/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick18: glusterfs3sds:/ws/disk6/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick19: glusterfs1sds:/ws/disk7/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick20: glusterfs2sds:/ws/disk7/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick21: glusterfs3sds:/ws/disk7/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick22: glusterfs1sds:/ws/disk8/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick23: glusterfs2sds:/ws/disk8/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Brick24: glusterfs3sds:/ws/disk8/ws_brick
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Options Reconfigured:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> performance.readdir-ahead: on
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> diagnostics.client-log-level: INFO
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks and Regards,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Ram
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ***************************Legal
>>>>>>>>>>>>>> Disclaimer***************************
>>>>>>>>>>>>>> "This communication may contain confidential and privileged
>>>>>>>>>>>>>> material for the sole use of the intended recipient. Any
>>>>>>>>>>>>>> unauthorized review, use or distribution by others is
>>>>>>>>>>>>>> strictly prohibited. If you have received the message by
>>>>>>>>>>>>>> mistake, please advise the sender by reply email and delete the message. Thank you."
>>>>>>>>>>>>>> *************************************************************
>>>>>>>>>>>>>> **
>>>>>>>>>>>>>> ***
>>>>>>>>>>>>>> *
>>>>>>>>>>>>>> *
>>>>>>>>>>>>>> *
>>>>>>>>>>>>>> *
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> Gluster-devel mailing list
>>>>>>>>>>>>>> Gluster-devel@xxxxxxxxxxx <mailto:Gluster-devel@xxxxxxxxxxx>
>>>>>>>>>>>>>> http://www.gluster.org/mailman/listinfo/gluster-devel
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> ***************************Legal
>>>>>>>>>>>>> Disclaimer***************************
>>>>>>>>>>>>> "This communication may contain confidential and privileged
>>>>>>>>>>>>> material for the sole use of the intended recipient. Any
>>>>>>>>>>>>> unauthorized review, use or distribution by others is strictly
>>>>>>>>>>>>> prohibited. If you have received the message by mistake,
>>>>>>>>>>>>> please advise the sender by reply
>>>>>>>>>>>> email and delete the message. Thank you."
>>>>>>>>>>>>> **************************************************************
>>>>>>>>>>>>> **
>>>>>>>>>>>>> ***
>>>>>>>>>>>>> *
>>>>>>>>>>>>> *
>>>>>>>>>>>>> *
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> ***************************Legal
>>>>>>>>>>>> Disclaimer***************************
>>>>>>>>>>>> "This communication may contain confidential and privileged
>>>>>>>>>>>> material for the sole use of the intended recipient. Any
>>>>>>>>>>>> unauthorized review, use or distribution by others is strictly
>>>>>>>>>>>> prohibited. If you have received the message by mistake, please
>>>>>>>>>>>> advise the sender by reply email and delete the message. Thank you."
>>>>>>>>>>>> ***************************************************************
>>>>>>>>>>>> **
>>>>>>>>>>>> ***
>>>>>>>>>>>> *
>>>>>>>>>>>> *
>>>>>>>>>>>
>>>>>>>>>>> ***************************Legal
>>>>>>>>>>> Disclaimer***************************
>>>>>>>>>>> "This communication may contain confidential and privileged
>>>>>>>>>>> material for the sole use of the intended recipient. Any
>>>>>>>>>>> unauthorized review, use or distribution by others is strictly
>>>>>>>>>>> prohibited. If you have received the message by mistake, please
>>>>>>>>>>> advise the sender by reply
>>>>>>>>>> email and delete the message. Thank you."
>>>>>>>>>>> ****************************************************************
>>>>>>>>>>> **
>>>>>>>>>>> ***
>>>>>>>>>>> *
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> ***************************Legal
>>>>>>>>>> Disclaimer***************************
>>>>>>>>>> "This communication may contain confidential and privileged
>>>>>>>>>> material for the sole use of the intended recipient. Any
>>>>>>>>>> unauthorized review, use or distribution by others is strictly
>>>>>>>>>> prohibited. If you have received the message by mistake, please
>>>>>>>>>> advise the sender by reply email and delete the message. Thank you."
>>>>>>>>>> *****************************************************************
>>>>>>>>>> **
>>>>>>>>>> ***
>>>>>>>>>
>>>>>>>>> ***************************Legal
>>>>>>>>> Disclaimer***************************
>>>>>>>>> "This communication may contain confidential and privileged material for the sole use of the intended recipient. Any unauthorized review, use or distribution by others is strictly prohibited. If you have received the message by mistake, please advise the sender by reply email and delete the message. Thank you."
>>>>>>>>> ******************************************************************
>>>>>>>>> **
>>>>>>>>> **
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Gluster-users mailing list
>>>>>>>>> Gluster-users@xxxxxxxxxxx <mailto:Gluster-users@xxxxxxxxxxx>
>>>>>>>>> http://www.gluster.org/mailman/listinfo/gluster-users
>>>>>>>>> ***************************Legal
>>>>>>>>> Disclaimer***************************
>>>>>>>>> "This communication may contain confidential and privileged
>>>>>>>>> material for the sole use of the intended recipient. Any
>>>>>>>>> unauthorized review, use or distribution by others is strictly
>>>>>>>>> prohibited. If you have received the message by mistake, please advise the sender by reply email and delete the message. Thank you."
>>>>>>>>> ******************************************************************
>>>>>>>>> **
>>>>>>>>> **
>>>>>>>>>
>>>>>>>>
>>>>>>> ***************************Legal
>>>>>>> Disclaimer***************************
>>>>>>> "This communication may contain confidential and privileged material
>>>>>>> for the sole use of the intended recipient. Any unauthorized review,
>>>>>>> use or distribution by others is strictly prohibited. If you have
>>>>>>> received the message by mistake, please advise the sender by reply email and delete the message. Thank you."
>>>>>>> ********************************************************************
>>>>>>> **
>>>>>>>
>>>>>>
>>>>>> ***************************Legal
>>>>>> Disclaimer***************************
>>>>>> "This communication may contain confidential and privileged material
>>>>>> for the sole use of the intended recipient. Any unauthorized review,
>>>>>> use or distribution by others is strictly prohibited. If you have
>>>>>> received the message by mistake, please advise the sender by reply email and delete the message. Thank you."
>>>>>> *********************************************************************
>>>>>> *
>>>>>>
>>>>>>
>>>>>
>>>> ***************************Legal Disclaimer***************************
>>>> "This communication may contain confidential and privileged material for the sole use of the intended recipient. Any unauthorized review, use or distribution by others is strictly prohibited. If you have received the message by mistake, please advise the sender by reply email and delete the message. Thank you."
>>>> **********************************************************************
>>>>
>>>> _______________________________________________
>>>> Gluster-devel mailing list
>>>> Gluster-devel@xxxxxxxxxxx <mailto:Gluster-devel@xxxxxxxxxxx>
>>>> http://www.gluster.org/mailman/listinfo/gluster-devel
>>>> ***************************Legal Disclaimer***************************
>>>> "This communication may contain confidential and privileged material for the
>>>> sole use of the intended recipient. Any unauthorized review, use or distribution
>>>> by others is strictly prohibited. If you have received the message by mistake,
>>>> please advise the sender by reply email and delete the message. Thank you."
>>>> **********************************************************************
>>>>
>>>
>> ***************************Legal Disclaimer***************************
>> "This communication may contain confidential and privileged material for the
>> sole use of the intended recipient. Any unauthorized review, use or distribution
>> by others is strictly prohibited. If you have received the message by mistake,
>> please advise the sender by reply email and delete the message. Thank you."
>> **********************************************************************
>>
>
>
>
> ***************************Legal Disclaimer***************************
> "This communication may contain confidential and privileged material for the
> sole use of the intended recipient. Any unauthorized review, use or
> distribution
> by others is strictly prohibited. If you have received the message by
> mistake,
> please advise the sender by reply email and delete the message. Thank you."
> **********************************************************************
>
>
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users@xxxxxxxxxxx
> http://lists.gluster.org/mailman/listinfo/gluster-users
> ***************************Legal Disclaimer***************************
> "This communication may contain confidential and privileged material for the
> sole use of the intended recipient. Any unauthorized review, use or
> distribution
> by others is strictly prohibited. If you have received the message by
> mistake,
> please advise the sender by reply email and delete the message. Thank you."
> **********************************************************************
>
>
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users@xxxxxxxxxxx
> http://lists.gluster.org/mailman/listinfo/gluster-users
>
>
>
> ***************************Legal Disclaimer***************************
> "This communication may contain confidential and privileged material for the
> sole use of the intended recipient. Any unauthorized review, use or
> distribution
> by others is strictly prohibited. If you have received the message by
> mistake,
> please advise the sender by reply email and delete the message. Thank you."
> **********************************************************************

_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-users

_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-users