Re: should geo repl pick up changes to a vol?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 03/02/17 07:25, Kotresh Hiremath Ravishankar wrote:
Hi,

The following steps needs to be followed when a brick is added from new node on master.

1. Stop geo-rep
geo repl which master volume had a brick removed:

~]$ gluster volume geo-replication GROUP-WORK 10.5.6.32::GROUP-WORK-Replica status

MASTER NODE MASTER VOL MASTER BRICK SLAVE USER SLAVE SLAVE NODE STATUS CRAWL STATUS LAST_SYNCED
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
10.5.6.100 GROUP-WORK /__.aLocalStorages/3/0-GLUSTERs/GROUP-WORK root 10.5.6.32::GROUP-WORK-Replica 10.5.6.32 Active History Crawl 2017-02-01 15:24:05

~]$ gluster volume geo-replication GROUP-WORK 10.5.6.32::GROUP-WORK-Replica stop Staging failed on 10.5.6.49. Error: Geo-replication session between GROUP-WORK and 10.5.6.32::GROUP-WORK-Replica does not exist.
geo-replication command failed

10.5.6.49 is the brick which was added, now part of the master vol.



2. Run the following command on the master node where passwordless SSH
   connection is configured, in order to create a common pem pub file.

     # gluster system:: execute gsec_create

3. Create the geo-replication session using the following command.
   The push-pem and force options are required to perform the necessary
   pem-file setup on the slave nodes.

     # gluster volume geo-replication MASTER_VOL SLAVE_HOST::SLAVE_VOL create push-pem force

4. Start geo-rep

Thanks and Regards,
Kotresh H R

----- Original Message -----
From: "lejeczek" <peljasz@xxxxxxxxxxx>
To: gluster-users@xxxxxxxxxxx
Sent: Thursday, February 2, 2017 1:14:07 AM
Subject:  should geo repl pick up changes to a vol?

dear all

should gluster update geo repl when a volume changes?
eg. bricks are added, taken away.

reason I'm asking is because it doe not seem like gluster is
doing it on my systems?
Well, I see gluster removed a node form geo-repl, brick that
I removed.
But I added a brick to a vol and it's not there in geo-repl.

bw.
L.
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-users


_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-users



[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux