Hi Yonex, As we discussed in irc #gluster-devel , I have attached the gdb script along with this mail. Procedure to run the gdb script. 1) Install gdb, 2) Download and install gluster debuginfo for your machine . packages location --- > https://cbs.centos.org/koji/buildinfo?buildID=12757 3) find the process id and attach gdb to the process using the command gdb attach <pid> -x <path_to_script> 4) Continue running the script till you hit the problem 5) Stop the gdb 6) You will see a file called mylog.txt in the location where you ran the gdb Please keep an eye on the attached process. If you have any doubt please feel free to revert me. Regards Rafi KC On 12/19/2016 05:33 PM, Mohammed Rafi K C wrote: > > On 12/19/2016 05:32 PM, Mohammed Rafi K C wrote: >> Client 0-glusterfs01-client-2 has disconnected from bricks around >> 2016-12-15 11:21:17.854249 . Can you look and/or paste the brick logs >> around the time. > You can find the brick name and hostname for 0-glusterfs01-client-2 from > client graph. > > Rafi > >> Are you there in any of gluster irc channel, if so Have you got a >> nickname that I can search. >> >> Regards >> Rafi KC >> >> On 12/19/2016 04:28 PM, yonex wrote: >>> Rafi, >>> >>> OK. Thanks for your guide. I found the debug log and pasted lines around that. >>> http://pastebin.com/vhHR6PQN >>> >>> Regards >>> >>> >>> 2016-12-19 14:58 GMT+09:00 Mohammed Rafi K C <rkavunga@xxxxxxxxxx>: >>>> On 12/16/2016 09:10 PM, yonex wrote: >>>>> Rafi, >>>>> >>>>> Thanks, the .meta feature I didn't know is very nice. I finally have >>>>> captured debug logs from a client and bricks. >>>>> >>>>> A mount log: >>>>> - http://pastebin.com/Tjy7wGGj >>>>> >>>>> FYI rickdom126 is my client's hostname. >>>>> >>>>> Brick logs around that time: >>>>> - Brick1: http://pastebin.com/qzbVRSF3 >>>>> - Brick2: http://pastebin.com/j3yMNhP3 >>>>> - Brick3: http://pastebin.com/m81mVj6L >>>>> - Brick4: http://pastebin.com/JDAbChf6 >>>>> - Brick5: http://pastebin.com/7saP6rsm >>>>> >>>>> However I could not find any message like "EOF on socket". I hope >>>>> there is any helpful information in the logs above. >>>> Indeed. I understand that the connections are in disconnected state. But >>>> what particularly I'm looking for is the cause of the disconnect, Can >>>> you paste the debug logs when it start disconnects, and around that. You >>>> may see a debug logs that says "disconnecting now". >>>> >>>> >>>> Regards >>>> Rafi KC >>>> >>>> >>>>> Regards. >>>>> >>>>> >>>>> 2016-12-14 15:20 GMT+09:00 Mohammed Rafi K C <rkavunga@xxxxxxxxxx>: >>>>>> On 12/13/2016 09:56 PM, yonex wrote: >>>>>>> Hi Rafi, >>>>>>> >>>>>>> Thanks for your response. OK, I think it is possible to capture debug >>>>>>> logs, since the error seems to be reproduced a few times per day. I >>>>>>> will try that. However, so I want to avoid redundant debug outputs if >>>>>>> possible, is there a way to enable debug log only on specific client >>>>>>> nodes? >>>>>> if you are using fuse mount, there is proc kind of feature called .meta >>>>>> . You can set log level through that for a particular client [1] . But I >>>>>> also want log from bricks because I suspect bricks process for >>>>>> initiating the disconnects. >>>>>> >>>>>> >>>>>> [1] eg : echo 8 > /mnt/glusterfs/.meta/logging/loglevel >>>>>> >>>>>>> Regards >>>>>>> >>>>>>> Yonex >>>>>>> >>>>>>> 2016-12-13 23:33 GMT+09:00 Mohammed Rafi K C <rkavunga@xxxxxxxxxx>: >>>>>>>> Hi Yonex, >>>>>>>> >>>>>>>> Is this consistently reproducible ? if so, Can you enable debug log [1] >>>>>>>> and check for any message similar to [2]. Basically you can even search >>>>>>>> for "EOF on socket". >>>>>>>> >>>>>>>> You can set your log level back to default (INFO) after capturing for >>>>>>>> some time. >>>>>>>> >>>>>>>> >>>>>>>> [1] : gluster volume set <volname> diagnostics.brick-log-level DEBUG and >>>>>>>> gluster volume set <volname> diagnostics.client-log-level DEBUG >>>>>>>> >>>>>>>> [2] : http://pastebin.com/xn8QHXWa >>>>>>>> >>>>>>>> >>>>>>>> Regards >>>>>>>> >>>>>>>> Rafi KC >>>>>>>> >>>>>>>> On 12/12/2016 09:35 PM, yonex wrote: >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> When my application moves a file from it's local disk to FUSE-mounted >>>>>>>>> GlusterFS volume, the client outputs many warnings and errors not >>>>>>>>> always but occasionally. The volume is a simple distributed volume. >>>>>>>>> >>>>>>>>> A sample of logs pasted: http://pastebin.com/axkTCRJX >>>>>>>>> >>>>>>>>> It seems to come from something like a network disconnection >>>>>>>>> ("Transport endpoint is not connected") at a glance, but other >>>>>>>>> networking applications on the same machine don't observe such a >>>>>>>>> thing. So I guess there may be a problem somewhere in GlusterFS stack. >>>>>>>>> >>>>>>>>> It ended in failing to rename a file, logging PHP Warning like below: >>>>>>>>> >>>>>>>>> PHP Warning: rename(/glusterfs01/db1/stack/f0/13a9a2f0): failed >>>>>>>>> to open stream: Input/output error in [snipped].php on line 278 >>>>>>>>> PHP Warning: >>>>>>>>> rename(/var/stack/13a9a2f0,/glusterfs01/db1/stack/f0/13a9a2f0): >>>>>>>>> Input/output error in [snipped].php on line 278 >>>>>>>>> >>>>>>>>> Conditions: >>>>>>>>> >>>>>>>>> - GlusterFS 3.8.5 installed via yum CentOS-Gluster-3.8.repo >>>>>>>>> - Volume info and status pasted: http://pastebin.com/JPt2KeD8 >>>>>>>>> - Client machines' OS: Scientific Linux 6 or CentOS 6. >>>>>>>>> - Server machines' OS: CentOS 6. >>>>>>>>> - Kernel version is 2.6.32-642.6.2.el6.x86_64 on all machines. >>>>>>>>> - The number of connected FUSE clients is 260. >>>>>>>>> - No firewall between connected machines. >>>>>>>>> - Neither remounting volumes nor rebooting client machines take effect. >>>>>>>>> - It is caused by not only rename() but also copy() and filesize() operation. >>>>>>>>> - No outputs in brick logs when it happens. >>>>>>>>> >>>>>>>>> Any ideas? I'd appreciate any help. >>>>>>>>> >>>>>>>>> Regards. >>>>>>>>> _______________________________________________ >>>>>>>>> Gluster-users mailing list >>>>>>>>> Gluster-users@xxxxxxxxxxx >>>>>>>>> http://www.gluster.org/mailman/listinfo/gluster-users
set pagination off set logging file mylog.txt set logging on handle SIGPIPE nostop b socket.c:596 commands 1 shell date -u p priv->incoming.ra_read p priv->incoming.ra_max p priv->incoming.ra_served p priv->incoming.record_state p priv->sock bt continue end b socket.c:2108 commands 2 shell date -u p in->total_bytes_read p in->msg_type bt continue end b socket.c:2142 if ret < 0 commands 3 shell date -u p frag->bytes_read p ret bt continue end b socket.c:1011 if size >= 1073741824ULL commands 4 shell date -u p size p iov_length (msg->rpchdr, msg->rpchdrcount) p iov_length (msg->proghdr, msg->proghdrcount) p iov_length (msg->progpayload, msg->progpayloadcount) bt continue end continue
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-users