U-Boot V2 Development (Barebox)

• Thread Index

• Re: [PATCH] I2C: i.MX: early: Use internal udelay
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH v2] ARM: i.MX6: Specify OCRAM base address and size
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: i.MX6: Specify OCRAM base address and size
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] I2C: i.MX: early: Use internal udelay
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] I2C: i.MX: early: Use internal udelay
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] I2C: i.MX: early: Use internal udelay
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] I2C: i.MX: early: Use internal udelay
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] mfd: add regmap driver for rohm-bd718x7
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] net: ifup: have ifup -a poll for link up in parallel
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] defaultenv-2: automount: use ifup -a1 for NFS/TFTP automounts
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 0/3] net: ifup: greatly reduce ifup -a time for multiple network interface
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] net: phy: remove duplicate definition of PHY_AN_TIMEOUT
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] net: ifup: have ifup -a1 stop at first DHCP-set global.net.server
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: i.MX8MM: innocomm-wb15: use revised PMIC settings
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] I2C: i.MX: early: Use internal udelay
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH] I2C: i.MX: early: Use internal udelay
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH] I2C: i.MX: early: Use internal udelay
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH v2 4/4] video: add support for QEMU ramfb
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 3/4] firmware: add QEMU FW CFG driver
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 2/4] asm-generic: avoid compiler warnings due to PCI_IOBASE
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 0/4] video: add support for QEMU ramfb
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v2 1/4] fs: devfs: implement cdev_fdopen
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] ARM: add DEBUG_LL support for ARM64 QEMU Virt
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH v3 4/4] ARM: novena: Use DDR3 information from SPD EEPROM
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH v3 3/4] ARM: novena: Read Ethernet MAC address from EEPROM
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH v3 2/4] ARM: novena: Setup RAM using static configuration
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH v3 0/4] Add support for the Kosagi Novena board
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH v3 1/4] ARM: novena: Add Kosagi Novena board
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH 1/3] nvmem: ocotp: add support for second MAC address on i.MX8MP
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: i.MX6: Specify OCRAM base address and size
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH v2] ARM: i.MX6: Specify OCRAM base address and size
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v2] ARM: i.MX6: Specify OCRAM base address and size
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH] I2C: i.MX: early: Use internal udelay
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH] ARM: i.MX6: Specify OCRAM base address and size
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] ARM: i.MX6: Specify OCRAM base address and size
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH v2 2/4] ARM: novena: Setup RAM using static configuration
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] ARM: novena: Add Kosagi Novena board
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] ARM: novena: Read Ethernet MAC address from EEPROM
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] net: ifup: have ifup -a stop at the first interface
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/2] net: ifup: prefer interfaces where the link is already up
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: implement detect callback for virtual adapter device as well
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] ddr_spd: remove unused local variable
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] phy: stm32-usphyc: add mdelay(1) to fix timeout on some machines
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] phy: stm32-usphyc: add mdelay(1) to fix timeout on some machines
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] spi: Fix probing SPI drivers with no cs-gpios
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] ARM: novena: Setup RAM using static configuration
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] ARM: novena: Read Ethernet MAC address from EEPROM
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH v2 2/4] ARM: novena: Setup RAM using static configuration
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH v2 1/4] ARM: novena: Add Kosagi Novena board
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH v2 1/4] ARM: novena: Add Kosagi Novena board
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] ARM: novena: Read Ethernet MAC address from EEPROM
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] ARM: novena: Setup RAM using static configuration
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] ARM: novena: Add Kosagi Novena board
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: Re: Draft of an errata for RFC916
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v2 4/4] ARM: novena: Use DDR3 information from SPD EEPROM
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH v2 3/4] ARM: novena: Read Ethernet MAC address from EEPROM
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH v2 2/4] ARM: novena: Setup RAM using static configuration
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH v2 1/4] ARM: novena: Add Kosagi Novena board
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH v2 0/4] Add support for the Kosagi Novena board
  • From: John Watts <contact@xxxxxxxxxx>
• Re: Re: Draft of an errata for RFC916
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH v2 1/2] imx6-mmdc: Work around ERR050070
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ratp: Fix retransmission for header-only packets
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH v2] ratp: Fix retransmission for header-only packets
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Draft of an errata for RFC916
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH] ddr_spd: remove unused local variable
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i.MX: Use initialized dev for dev_dbg()
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [RFC PATCH 2/2] net: ifup: have ifup -a stop at the first interface
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [RFC PATCH 1/2] net: ifup: prefer interfaces where the link is already up
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: implement detect callback for virtual adapter device as well
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: i.MX: Use better error code when bus recovery failed
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] i2c: i.MX: Use initialized dev for dev_dbg()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: implement detect callback for virtual adapter device as well
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: Make i2c_recover_bus() to return -EBUSY if bus recovery unimplemented
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: i.MX: Use better error code when bus recovery failed
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] gpio: Fix unused variable warning
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: Re: Question about RATP protocol limitation during handshake in barebox
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH master 1/2] net: dsa: realtek: support enabling only one of the drivers
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH] gpio: Fix unused variable warning
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] ARM: i.MX8MM: split barebox dts into dtsi file
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH master 1/2] net: dsa: realtek: support enabling only one of the drivers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master 2/2] net: dsa: ksz8873: fix mismatched return value
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] i2c: implement detect callback for virtual adapter device as well
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] i2c: Make i2c_recover_bus() to return -EBUSY if bus recovery unimplemented
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] i2c: i.MX: Use better error code when bus recovery failed
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Re: Question about RATP protocol limitation during handshake in barebox
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH v2] phy: stm32-usphyc: add mdelay(1) to fix timeout on some machines
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH] phy: stm32-usphyc: add mdelay(1) to fix timeout on some machines
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v2] spi: Fix probing SPI drivers with no cs-gpios
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH] usb: dwc2: fix multiplier handling in endpoint setup
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] usb: dwc2: fix multiplier handling in endpoint setup
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] ARM: dts: stm32mp15x: adjust USB OTG gadget tx fifo sizes
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM
  • From: John Watts <contact@xxxxxxxxxx>
• Question about RATP protocol limitation during handshake in barebox
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v2 1/2] imx6-mmdc: Work around ERR050070
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH v2 2/2] imx6-mmdc: Revert calibration configuration on failure
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH 0/7] Support generating DIMM parameters on more systems
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH 1/2] imx6-mmdc: Work around ERR050070
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH 2/2] imx6-mmdc: Revert calibration configuration on failure
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] imx6-mmdc: Revert calibration configuration on failure
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH 1/2] imx6-mmdc: Work around ERR050070
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] imx6-mmdc: Revert calibration configuration on failure
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] imx6-mmdc: Work around ERR050070
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 0/7] Support generating DIMM parameters on more systems
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH 2/2] imx6-mmdc: Revert calibration configuration on failure
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH 1/2] imx6-mmdc: Work around ERR050070
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH 3/3] arm: rockchip_v8_defconfig: Disable PIO mode for MCI_DW
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [RFC PATCH] ratp: Fix retransmission for header-only packets
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH 1/7] I2C: i.MX: Add early i2c support for i.MX6
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH] spi: Fix probing SPI drivers without a cs-gpios node
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] ARM: novena: Add Kosagi Novena board
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] arm: rockchip_v8_defconfig: Disable PIO mode for MCI_DW
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [RFT PATCH] ARM: stm32mp: odyssey-som: use upstream device trees
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/7] I2C: i.MX: Add early i2c support for i.MX6
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: Fix probing SPI drivers without a cs-gpios node
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH 3/3] arm: rockchip_v8_defconfig: Disable PIO mode for MCI_DW
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/3] Documentation: Rockchip: Update documentation to latest binaries
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/3] arm: rockchip: oldconfig rockchip_v8_defconfig
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/9] net: dsa: add Realtek (rtl8365mb/rtl8366rb) switch support
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [RFT PATCH] ARM: stm32mp: odyssey-som: use upstream device trees
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] ARM: i.MX8M: add PCA9450 PMIC on rev-b EVK
  • From: SCHNEIDER Johannes <johannes.schneider@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] ARM: novena: Use DDR3 information from SPD EEPROM
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH] spi: Fix probing SPI drivers without a cs-gpios node
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH] spi: Fix probing SPI drivers without a cs-gpios node
  • From: Alexander Shiyan <eagle.alexander923@xxxxxxxxx>
• [PATCH 5/5] ARM: novena: Use DDR3 information from SPD EEPROM
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH 3/5] ARM: novena: Require the PFUZE regulator
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH 2/5] ARM: novena: Setup RAM using static configuration
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH 1/5] ARM: novena: Add Kosagi Novena board
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH 0/5] Add support for the Kosagi Novena board
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH] spi: Fix probing SPI drivers without a cs-gpios node
  • From: John Watts <contact@xxxxxxxxxx>
• Re: [PATCH] spi: Fix probing SPI drivers without a cs-gpios node
  • From: Alexander Shiyan <eagle.alexander923@xxxxxxxxx>
• [PATCH] spi: Fix probing SPI drivers without a cs-gpios node
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH 7/7] ddr_spd: Support reading SPD from DDR3 sticks
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH 6/7] ddr_dimms: Remove mclk_ps for DDR3 and DDR4
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH 5/7] ddr_dimms: Move ddr*_dimm_params to common
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH 4/7] ddr: fsl: Remove includes to fsl-specific code
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH 3/7] ddr_dimms: Move FSL dimm_params to include/ddr_dimms.h
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH 0/7] Support generating DIMM parameters on more systems
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH 1/7] I2C: i.MX: Add early i2c support for i.MX6
  • From: John Watts <contact@xxxxxxxxxx>
• [PATCH 2/7] ddr: fsl: Pass mclk_ps to ddr*_compute_dimm_parameters
  • From: John Watts <contact@xxxxxxxxxx>
• v2023.01.0
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] net: eth: skip opening disabled interfaces when going interactive
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] of: platform: call struct device::detect in of_device_create_on_demand
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] ARM: i.MX8MM: add support for 8MMINILPD4-CPU2 board
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] ARM: i.MX8MM: split barebox dts into dtsi file
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] ARM: i.MX8M: add PCA9450 PMIC on rev-b EVK
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] net: eth: skip opening disabled interfaces when going interactive
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] of: implement of_device_enable_by_alias
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] state: backend: direct: open backend in read-only mode if possible
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH 5/9] net: dsa: populate struct dsa_port::index/dev members
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 8/9] net: dsa: add struct dsa_switch::priv member for driver use
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 9/9] net: dsa: add Realtek (rtl8365mb/rtl8366rb) switch support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/9] net: dsa: factor out dsa_port_alloc helper
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 6/9] net: dsa: always call port_pre_enable before port_enable
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 0/9] net: dsa: add Realtek (rtl8365mb/rtl8366rb) switch support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 7/9] net: dsa: add some helpers to ease porting kernel drivers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/9] driver: alias of_match_ptr and DRV_OF_COMPAT
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/9] gpiolib: implement gpio_direction_input/output
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/9] net: dsa: rename dsa_ops to dsa_switch_ops
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/3] of: platform: call struct device::detect in of_device_create_on_demand
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/3] i2c: implement detect callback
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/3] i2c: write debug print when registering any i2c client
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [RFT PATCH] ARM: stm32mp: odyssey-som: use upstream device trees
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] of: implement of_device_enable_by_alias
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] state: backend: direct: open backend in read-only mode if possible
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] net: e1000: read EEPROM through EERD register on 8257x adapters
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ddr_spd: use unsigned type for crc bytes in DDR3/4 SPD check
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/8] ARM: imx6sx: udoo-neo: port to driver model
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] net: e1000: read EEPROM through EERD register on 8257x adapters
  • From: Denis Orlov <denorl2009@xxxxxxxxx>
• [PATCH] ddr_spd: use unsigned type for crc bytes in DDR3/4 SPD check
  • From: Denis Orlov <denorl2009@xxxxxxxxx>
• [PATCH v1 7/8] ARM: imx6sx: udoo-neo: fix gpt timer configuration
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 2/8] ARM: imx6sx: udoo-neo: enable deep probe support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 1/8] ARM: imx6sx: udoo-neo: port to driver model
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 3/8] ARM: imx6sx: udoo-neo: fix board compatible
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 4/8] ARM: imx6sx: udoo-neo: configure GPIO pins for board auto detection.
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 8/8] ARM: imx6sx: udoo-neo: add barebox update handler support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 5/8] ARM: imx6sx: udoo-neo: add version detection support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 6/8] ARM: imx6sx: udoo-neo: enable memory size auto detection
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] ARM: dts: remove duplicate reserved-memory nodes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] driver: drop no longer used RW_SIZE/_MASK macros
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v4] ARM: i.MX8M: smccc: allow SIP_BUILDINFO call on all imx8m variants
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v4] ARM: i.MX8M: separate function call for clock_init
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] net: eqos: add i.MX8MP support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 00/11] net: dsa: ksz9477: use regmap to add I2C support next to SPI
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] ARM: i.MX8M: bootrom-cmd: clean up pointer casting
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] ARM: at91: sama5d4: enable for DT use
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] mtd: consult CONFIG_OFDEVICE in mtd_get_of_node
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] mci: atmel_mci: fix off-by-1000 in poll timeout
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 00/15] mtd: nand: atmel: import Linux NAND controller driver
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v4] ARM: i.MX8M: smccc: allow SIP_BUILDINFO call on all imx8m variants
  • From: SCHNEIDER Johannes <johannes.schneider@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 09/15] lib: provide stub Linux "generic" allocator API
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] firmware: Kconfig: unify whitespace used for indentation
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v4] ARM: i.MX8M: smccc: allow SIP_BUILDINFO call on all imx8m variants
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] firmware: Kconfig: unify whitespace used for indentation
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: i.MX8MP: move MAC address description to common location
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v4] ARM: i.MX8M: smccc: allow SIP_BUILDINFO call on all imx8m variants
  • From: Johannes Schneider <johannes.schneider@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: i.MX8M: smccc: allow SIP_BUILDINFO call on all imx8m variants
  • From: SCHNEIDER Johannes <johannes.schneider@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] ARM: i.MX8M: smccc: allow SIP_BUILDINFO call on all imx8m variants
  • From: Johannes Schneider <johannes.schneider@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: i.MX8MP: move MAC address description to common location
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: i.MX8MP: move MAC address description to common location
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: dts: i.MX8MP: move MAC address description to common location
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/3] net: eqos: add i.MX8MP support
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: dts: i.MX8MP: move MAC address description to common location
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/3] nvmem: ocotp: add support for second MAC address on i.MX8MP
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 12/15] mtd: nand: atmel: import Linux NAND controller driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 11/15] mfd: add atmel-smc driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 04/15] mtd: nand: rename nand_device::eccreq to Linux' ecc.requirements
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 10/15] memory: add Atmel EBI driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 14/15] mtd: nand: drop DT support in legacy driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 03/15] mtd: nand: prefix enum nand_ecc_algo constants with NAND_ECC_ALGO_
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 00/15] mtd: nand: atmel: import Linux NAND controller driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 09/15] lib: provide stub Linux "generic" allocator API
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 02/15] mtd: nand: base: implement nand_gpio_waitrdy
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 01/15] asm-generic: io.h: sync with Linux
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 05/15] mtd: nand: define nand_get_(small|large)_page_ooblayout
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 13/15] ARM: AT91: sama5d3_xplained: switch to upstream binding
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 15/15] ARM: AT91: sama5d3: always read memory size from controller
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 07/15] mtd: nand: provide Linux' struct nand_ecc_ctrl::engine_type
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 08/15] driver: implement dev_request_resource
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 06/15] mtd: nand: define nand_interface_is_sdr
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] mci: atmel_mci: don't print error messages when probing SDIO
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] mci: atmel_mci: fix off-by-1000 in poll timeout
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2] mtd: consult CONFIG_OFDEVICE in mtd_get_of_node
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] ARM: at91: make bootsource code generic to all SAMA5
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] ARM: at91: sama5d4: enable for DT use
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] ARM: i.MX8M: bootrom-cmd: clean up pointer casting
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] ARM: i.MX8M: bootrom: access OCRAM directly if running in EL3
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 02/11] regmap: support formatted read and write
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 08/11] dev: add dev_bus_is_spi/i2c helpers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 09/11] net: dsa: ksz9477: refactor to prepare i2c support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 06/11] net: dsa: ksz9477: create regmap cdev for switch registers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 01/11] regmap: consolidate reg/val format into regmap_format
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 03/11] regmap: port regmap_init_spi
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 05/11] net: dsa: ksz9477: switch to regmap_init_spi
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 04/11] regmap: factor out regmap cdev size calculation
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 11/11] net: ksz9477: add I2C support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 10/11] regmap: i2c: use formatted I/O
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 07/11] drivers: base: regmap: introduce REGMAP_I2C
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 00/11] net: dsa: ksz9477: use regmap to add I2C support next to SPI
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] driver: drop no longer used RW_SIZE/_MASK macros
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v4] ARM: i.MX8M: separate function call for clock_init
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v4] ARM: rpi: parse memory from vc fdt
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v4] ARM: i.MX8M: separate function call for clock_init
  • From: Johannes Schneider <johannes.schneider@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v4] ARM: rpi: parse memory from vc fdt
  • From: Johannes Schneider <johannes.schneider@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] ARM: i.MX8M: separate function call for clock_init
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3] ARM: i.MX8M: separate function call for clock_init
  • From: Johannes Schneider <johannes.schneider@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 03/11] ARM: at91: sama5d4: enable for DT use
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] ARM: i.MX8M: add PCA9450 PMIC on rev-b EVK
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: rpi: parse memory from vc fdt
  • From: SCHNEIDER Johannes <johannes.schneider@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] ARM: i.MX8M: smccc: fix firmware_atf check
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] ARM: i.MX8M: fix typo in function call
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] ARM: i.MX8M: add PCA9450 PMIC on rev-b EVK
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: rpi: parse memory from vc fdt
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 1/1] ARM: i.MX8M: smccc: fix firmware_atf check
  • From: Johannes Schneider <johannes.schneider@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/1] ARM: i.MX8M: fix typo in function call
  • From: Johannes Schneider <johannes.schneider@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/1] ARM: i.MX8M: add PCA9450 PMIC on rev-b EVK
  • From: Johannes Schneider <johannes.schneider@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] ARM: rpi: parse memory from vc fdt
  • From: Johannes Schneider <johannes.schneider@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 06/11] net: dsa: ksz9477: create regmap cdev for switch registers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] net: e1000: don't use nanosecond constants in readl_poll_timeout
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 0/7] ARM: i.MX8M: add optional CAAM init in PBL
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 06/11] net: dsa: ksz9477: create regmap cdev for switch registers
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: rpi: parse memory from vc fdt
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: switch open-coded instances to platform_mem_driver
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX8M: bootrom: access OCRAM directly if running in EL3
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH v2] ARM: switch open-coded instances to platform_mem_driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 07/11] drivers: base: regmap: introduce REGMAP_I2C
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 03/11] regmap: port regmap_init_spi
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 02/11] regmap: support formatted read and write
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 05/11] net: dsa: ksz9477: switch to regmap_init_spi
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 08/11] dev: add dev_bus_is_spi/i2c helpers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 04/11] regmap: factor out regmap cdev size calculation
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 11/11] net: ksz9477: add I2C support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 09/11] net: dsa: ksz9477: refactor to prepare i2c support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 06/11] net: dsa: ksz9477: create regmap cdev for switch registers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 10/11] regmap: i2c: use formatted I/O
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 00/11] net: dsa: ksz9477: use regmap to add I2C support next to SPI
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 01/11] regmap: consolidate reg/val format into regmap_format
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] net: bcmgenet: fix warning when building for 32-bit
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH 7/7] ARM: i.MX8M: init CAAM when CONFIG_FSL_CAAM_RNG_PBL_INIT
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/7] crypto: caam - implement early PBL init
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/7] crypto: caam - sync 64-bit accessors with Linux
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/7] crypto: caam - make command constants unsigned
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/7] ARM: i.MX8M: bootrom: access OCRAM directly if running in EL3
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 6/7] common: add new CONFIG_HAVE_OPTEE symbol
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 0/7] ARM: i.MX8M: add optional CAAM init in PBL
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/7] crypto: caam - add job ring accessors from Linux
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] pinctrl: stm32: fix pinctrl/gpio dependency ordering
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] include: linux/iopoll.h: silence warning when timeout_us contains *
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! ARM: switch open-coded instances to platform_mem_driver
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] ARM: i.MX8M: bootrom: access OCRAM directly if running in EL3
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2] include: linux/iopoll.h: silence warning when timeout_us contains *
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] include: linux/iopoll.h: silence warning when timeout_us contains *
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] fixup! ARM: switch open-coded instances to platform_mem_driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: rpi: parse memory from vc fdt
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: rpi: parse memory from vc fdt
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: rpi: defconfig: enable Raspberry Pi 4 drivers in 32-bit config
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] net: bcmgenet: fix warning when building for 32-bit
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] pinctrl: stm32: fix pinctrl/gpio dependency ordering
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: switch open-coded instances to platform_mem_driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc2: fix multiplier handling in endpoint setup
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] net: e1000: don't use nanosecond constants in readl_poll_timeout
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] include: linux/iopoll.h: silence warning when timeout_us contains *
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc2: fix multiplier handling in endpoint setup
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH 3/3] ARM: dts: rpi3: Enable sdhci controller
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/3] mci: handle SDIO cards gracefully
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/3] mci: Add more respone types
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] net: designware: eqos: implement set_promisc callback
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc2: fix multiplier handling in endpoint setup
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc2: fix multiplier handling in endpoint setup
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] usb: dwc2: fix multiplier handling in endpoint setup
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] lib: add jsmn JSON parser
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 00/11] ARM: at91: sama5d4: add basic Wifx L1 support
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: consult CONFIG_OFDEVICE in mtd_get_of_node
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 0/7] treewide: misc helpers for porting
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] regulator: rk808: simplify one error branch with dev_err_probe
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] include: linux/iopoll.h: silence warning when timeout_us contains *
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! include: linux/iopoll.h: silence warning when timeout_us contains *
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] fixup! Rename device_d::device_node to device_d::of_node
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] of: gpio: include <of.h> in <of_gpio.h>
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] driver: add of_match_table as alias to of_compatible
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] regulator: scmi: rename struct scmi_regulator::device_node to of_node
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] asm-generic: define IOMEM for assembly as well
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: rockchip: make ATF installation optional
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master] nvmem: ocotp: decouple featctrl from barebox,provide-mac-address
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master] i2c: imx: increase timeout in i2c_fsl_poll_status from 1 to 5ms
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] net: dsa: ksz9477: fix confusing message detecting KSZ9893 compatible
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH 1/2] net: dsa: ksz9477: fix confusing message detecting KSZ9893 compatible
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] net: dsa: ksz9477: match microchip,ksz8563 compatible
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master] i2c: imx: increase timeout in i2c_fsl_poll_status from 1 to 5ms
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master] nvmem: ocotp: decouple featctrl from barebox,provide-mac-address
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/4] lib: extend jsmn with simple JSONPath lookup helpers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/4] lib: add jsmn JSON parser support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/4] test: self: add json parser test
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 0/4] lib: add jsmn JSON parser
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/4] vsprintf: implement %pJP for printing JSONPaths
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] fixup! include: linux/iopoll.h: silence warning when timeout_us contains *
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: rockchip: make ATF installation optional
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] regulator: rk808: simplify one error branch with dev_err_probe
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] asm-generic: define IOMEM for assembly as well
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] include: linux/iopoll.h: silence warning when timeout_us contains *
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/4] gpiolib: implement dev_gpiod_get_index
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/4] gpiolib: use signed int for gpio in gpiod_set_value
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/4] gpiolib: implement gpiod_get_value
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/4] of: gpio: include <of.h> in <of_gpio.h>
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] driver: add of_match_table as alias to of_compatible
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] regulator: scmi: rename struct scmi_regulator::device_node to of_node
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/7] include: driver: make dev_(get_priv|is_probed) argument const pointer
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 7/7] barebox-wrapper: define MODULE_DEVICE_TABLE
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/7] clk: add prepare/unprepare helpers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/7] include: sync io-64-nonatomic-*.h headers with Linux
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/7] of: provide of_node_get and of_node_put stubs
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 6/7] include: linux/slab.h: define krealloc/kstrdup
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/7] vsprintf: support %pOF format specifier
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 0/7] treewide: misc helpers for porting
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] mtd: consult CONFIG_OFDEVICE in mtd_get_of_node
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 10/11] ARM: at91: make bootsource code generic to all SAMA5
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 11/11] ARM: at91: SAMA5D4: add Wifx L1 support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 00/11] ARM: at91: sama5d4: add basic Wifx L1 support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 06/11] eeprom: at24: add 24mac402/602 support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 07/11] driver: always ensure probe of RAM registered with mem_platform_driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 01/11] ARM: at91: sama5: switch to nonnaked entry functions
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 03/11] ARM: at91: sama5d4: enable for DT use
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 08/11] common: deep-probe: don't build without CONFIG_OFDEVICE
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 09/11] pinctrl: at91: make deep-probe compatible
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 02/11] ARM: at91: sama5d4: add entry point helpers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 05/11] i2c: at91: extend for SAMA5D4 support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 04/11] net: macb: match atmel,sama5d4-gem compatible
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/3] fixup! Rename struct driver_d to driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/3] fixup! Rename struct device_d to device
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/3] fixup! Rename device_d::device_node to device_d::of_node
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH master 1/3] driver: have dev_name(unregistered device) behave as expected
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] of: partition: moan if adding a partition failed
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH master 1/3] driver: have dev_name(unregistered device) behave as expected
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH master 2/3] efi: acpi: add SDT resource before registering device
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH master 3/3] reset: core: support deep probe with resets registered in CLK_OF_DECLARE
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH] of: partition: moan if adding a partition failed
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• [PATCH v2] of: partition: moan if adding a partition failed
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• Re: [PATCH] of: partition: moan if adding a partition failed
  • From: Alexander Shiyan <eagle.alexander923@xxxxxxxxx>
• [PATCH] of: partition: moan if adding a partition failed
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• Re: [PATCH] common: deep-probe: write deep probe enabled message to log
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] ARM: configs: imx_v7_defconfig: enable some useful options
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] ARM: configs: imx_v7_defconfig: enable some useful options
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] ARM: configs: imx_v7_defconfig: enable some useful options
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] video: vpl: don't print only skipped vpl endpoints
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: dts: fix wrong display-timings native-mode binding
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: i.MX8M: add EVK barebox installation documentation
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] mci: sdhci: arasan: fix probing eMMC without no-sd
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: arasan-sdhci eMMC Problem 'command timeout'
  • From: Yann Sionneau <ysionneau@xxxxxxxxx>
• Re: [PATCH] ARM: asm: simplify arm_mem_stack_top
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] ARM: asm: simplify arm_mem_stack_top
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] fixup! Documentation: i.MX8M: add EVK barebox installation documentation
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: i.MX8M: add EVK barebox installation documentation
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• Re: arasan-sdhci eMMC Problem 'command timeout'
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] mci: sdhci: arasan: fix probing eMMC without no-sd
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] Documentation: i.MX8M: add EVK barebox installation documentation
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 00/11] ARM: at91: sama5d4: add basic Wifx L1 support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 00/11] ARM: at91: sama5d4: add basic Wifx L1 support
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 00/11] ARM: at91: sama5d4: add basic Wifx L1 support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 00/11] ARM: at91: sama5d4: add basic Wifx L1 support
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 3/6] ARM: i.MX6: skov: refactor LVDS/parallel device tree fixups
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 1/6] clk: imx: set CLK_SET_RATE_NO_REPARENT for all muxes
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] ARM: configs: imx_v7_defconfig: enable some useful options
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] ARM: i.MX6: skov: fix LVDS deep probe
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 5/6] video: edid: print debug message on EDID read out error
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] common: deep-probe: write deep probe enabled message to log
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] common: deep-probe: write deep probe enabled message to log
  • From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
• Re: [PATCH] common: deep-probe: write deep probe enabled message to log
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] common: deep-probe: write deep probe enabled message to log
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] common: deep-probe: write deep probe enabled message to log
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] common: deep-probe: write deep probe enabled message to log
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] video: vpl: don't print only skipped vpl endpoints
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/6] ARM: i.MX6: skov: refactor LVDS/parallel device tree fixups
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/6] clk: mux: forward round/set rate to parent if CLK_SET_RATE_PARENT
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/6] clk: imx: set CLK_SET_RATE_NO_REPARENT for all muxes
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 6/6] ARM: configs: imx_v7_defconfig: enable some useful options
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 0/6] ARM: i.MX6: Fix LVDS splash on skov and some others
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/6] ARM: i.MX6: skov: fix LVDS deep probe
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/6] video: edid: print debug message on EDID read out error
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: dts: fix wrong display-timings native-mode binding
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v2] ARM: dts: fix wrong display-timings native-mode binding
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: skov-imx6: fix wrong display-timings native-mode binding
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: skov-imx6: fix wrong display-timings native-mode binding
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH] ARM: dts: skov-imx6: fix wrong display-timings native-mode binding
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] arm: zync: Use XZ for image compression
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] arm: avnet zedboard: Use compressed DTB
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: AM335x DDR3 initialization / timing violation
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 01/11] ARM: at91: sama5: switch to nonnaked entry functions
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] mci: only write blocks when card out of programming mode
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] clk: add prepare/unprepare helpers
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] pbl: set IMAGE_COMPRESSION per default to lz4
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• AM335x DDR3 initialization / timing violation
  • From: Matthias Feser <m.feser@xxxxxxxxxxx>
• Re: [PATCH 0/5] Rename some structs
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PSA] Linux < v6.0.12 may cause issues with barebox' boot /mnt/nfs
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/5] Rename struct device_d to device
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/5] Rename struct driver_d to driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/5] Rename device_d::device_node to device_d::of_node
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/5] Rename struct fs_device_d to fs_device
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/5] Rename some structs
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/5] Rename struct fs_driver_d to fs_driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 11/11] ARM: at91: SAMA5D4: add Wifx L1 support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 09/11] pinctrl: at91: make deep-probe compatible
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 02/11] ARM: at91: sama5d4: add entry point helpers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 01/11] ARM: at91: sama5: switch to nonnaked entry functions
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 05/11] i2c: at91: extend for SAMA5D4 support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 10/11] ARM: at91: make bootsource code generic to all SAMA5
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 04/11] net: macb: match atmel,sama5d4-gem compatible
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 03/11] ARM: at91: sama5d4: enable for DT use
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 06/11] eeprom: at24: add 24mac402/602 support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 00/11] ARM: at91: sama5d4: add basic Wifx L1 support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 07/11] driver: always ensure probe of RAM registered with mem_platform_driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 08/11] common: deep-probe: don't build without CONFIG_OFDEVICE
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] mci: only write blocks when card out of programming mode
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2] mci: only write blocks when card out of programming mode
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] pbl: define DEBUG globally when CONFIG_INITCALL_DEBUG=y
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] mci: only write blocks when card out of programming mode
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] mci: only write blocks when card out of programming mode
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] mmc: atmel: Make write work on sama5d3
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] mci: only write blocks when card out of programming mode
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• RE: PCIE on LS1021A
  • From: Renaud Barbier <Renaud.Barbier@xxxxxxxxxx>
• Re: [PATCH master 1/2] KASan: test_kasan: silence warning with newer GCC
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] pbl: define DEBUG globally when CONFIG_INITCALL_DEBUG=y
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] RISC-V: start: print debugging info when CONFIG_DEBUG_INITCALLS
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] ARM: start: print debugging info when CONFIG_DEBUG_INITCALLS
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master 1/2] KASan: test_kasan: silence warning with newer GCC
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master 2/2] KASan: fix handling of devices with MMIO above SDRAM memory region
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: PCIE on LS1021A
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: PCIE on LS1021A
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• RE: PCIE on LS1021A
  • From: Renaud Barbier <Renaud.Barbier@xxxxxxxxxx>
• Re: PCIE on LS1021A
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• RE: PCIE on LS1021A
  • From: Renaud Barbier <Renaud.Barbier@xxxxxxxxxx>
• PCIE on LS1021A
  • From: Renaud Barbier <Renaud.Barbier@xxxxxxxxxx>
• Re: [PATCH 1/3] driver: support Linux device/driver OF struct member names
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: start: print debugging info when CONFIG_DEBUG_INITCALLS
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• v2022.12.0
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: start: print debugging info when CONFIG_DEBUG_INITCALLS
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] bootsource: export bootsource_to_string()
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] include: soc: switch to SPDX-License-Identifier
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: start: print debugging info when CONFIG_DEBUG_INITCALLS
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] bootsource: export bootsource_to_string()
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] include: soc: switch to SPDX-License-Identifier
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: start: print debugging info when CONFIG_DEBUG_INITCALLS
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] pbl: define DEBUG globally when CONFIG_INITCALL_DEBUG=y
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] ARM: imx8m: allow ddr_get_firmware to be called from other units
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH 2/3] clk: add prepare/unprepare helpers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/3] of: provide of_node_get and of_node_put stubs
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/3] driver: support Linux device/driver OF struct member names
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH master] nvmem: core: don't fail on positive callback value return
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] mtd: peb: return success for reading/writing 0 bytes
  • From: Johannes Zink <j.zink@xxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: zii-imx8mq-dev: include DDR firmware in image
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/4] ARM: nxp-imx8mq-evk: include DDR firmware in image
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 4/4] ARM: phytec-som-imx8mq: include DDR firmware in image
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/4] ARM: imx8m: allow ddr_get_firmware to be called from other units
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH master] nvmem: core: don't fail on positive callback value return
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! ARM: i.MX8M: implement bootrom log viewing command
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: devicetree: Add folders to toctree
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: devicetree: bindings: Fix broken ref
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] common: boards: qemu-virt: fix env path for QEMU RISC-V
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] of: have of_property_match_string accept pointer to const device_node
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] treewide: rename CONFIG_HAS_ARCH_SJLJ to CONFIG_ARCH_HAS_SJLJ
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ddr: imx8m: warn about unsupported frequencies
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: barebox hooks in userspace
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] fixup! ARM: i.MX8M: implement bootrom log viewing command
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] pbl: set IMAGE_COMPRESSION per default to lz4
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: barebox hooks in userspace
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] Documentation: devicetree: Add folders to toctree
  • From: Thorsten Scherer <t.scherer@xxxxxxxxxxxx>
• [PATCH] Documentation: devicetree: bindings: Fix broken ref
  • From: Thorsten Scherer <t.scherer@xxxxxxxxxxxx>
• barebox hooks in userspace
  • From: Gerz Burak LCPF-CH <Burak.Gerz@xxxxxx>
• [PATCH] common: boards: qemu-virt: fix env path for QEMU RISC-V
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] of: platform: port Linux of_dma_is_coherent
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] of: have of_property_match_string accept pointer to const device_node
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] treewide: rename CONFIG_HAS_ARCH_SJLJ to CONFIG_ARCH_HAS_SJLJ
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] ddr: imx8m: warn about unsupported frequencies
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] ddr: imx8m: use pr_warn instead of plain prints
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] net: bcmgenet: Fix MAC address setting
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] regulator: core: don't call of_regulator_get with NULL argument
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] kvx,openrisc,riscv,sandbox/dts: harmonize clean-files definition
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] mfd: axp20x: support AXP313A PMIC
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] firmware: Makefile: fix firmware file dependency tracking
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master] net: bcmgenet: fix OF node of MII bus controller
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: bcm283x: fix use of unregistered device in debug print
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] regulator: core: don't call of_regulator_get with NULL argument
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master v2] regulator: rk808: fix misplaced DCDC_REG5
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] regulator: core: don't call of_regulator_get with NULL argument
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] ARM: i.MX8M: implement bootrom log viewing command
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] kvx,openrisc,riscv,sandbox/dts: harmonize clean-files definition
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM64: asm: mark __barebox_arm64_head as function
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH] mfd: axp20x: support AXP313A PMIC
  • From: Johannes Zink <j.zink@xxxxxxxxxxxxxx>
• [PATCH] firmware: Makefile: fix firmware file dependency tracking
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] i2c: bcm283x: fix use of unregistered device in debug print
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] regulator: core: don't call of_regulator_get with NULL argument
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH master] ARM: stm32mp: lxa-mc1: enable deep probe
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH master v2] regulator: rk808: fix misplaced DCDC_REG5
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• [PATCH master v2] regulator: rk808: fix misplaced DCDC_REG5
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master] regulator: rk808: fix misplaced DCDC_REG5
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] net: Add driver for bcmgenet
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master] net: bcmgenet: fix OF node of MII bus controller
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH master] ARM: stm32mp: lxa-mc1: enable deep probe
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH master] ARM: stm32mp: lxa-mc1: enable deep probe
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM64: asm: mark __barebox_arm64_head as function
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] fastboot: ubiformat: Fix writing sparse images
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] mtd: peb: return success for reading/writing 0 bytes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] Remove unused struct partition
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v4 6/6] regulator: add Rockchip rk808 support
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• v2022.11.0
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH 1/2] Kbuild: create LDFLAGS_common
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] Kbuild: link with -z noexecstack and --no-warn-rwx-segments
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/8] net: add promiscuous mode configuration support
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v4 3/8] ethlog: option to enable/disable promisc mode
  • From: Johannes Zink <j.zink@xxxxxxxxxxxxxx>
• [PATCH v4 7/8] ARM: boards: skov-imx6: convert all pr_ to dev_ prints
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 8/8] ARM: boards: skov-imx6: assigned separate MAC address to LAN2
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 1/8] net: add promiscuous mode configuration support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 5/8] drivers: net: fec_imx: add promiscuous mode configuration support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 2/8] net: usb: asix: add promisc mode support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 3/8] ethlog: option to enable/disable promisc mode
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 6/8] net: dsa: fix of_device_ensure_probed*() for switch ports
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 4/8] net: dsa: enable promiscuous mode for switch master edev
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH 4/4] gpio: Add gpio latch driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/4] bitmap: Implement bitmap_*zalloc()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/4] gpio: Add gpio latch driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/4] bitops: implement assign_bit()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/4] bitops: include linux/types.h
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 6/8] net: dsa: fix of_device_ensure_probed*() for switch ports
  • From: Johannes Zink <j.zink@xxxxxxxxxxxxxx>
• Re: [PATCH v3 5/8] drivers: net: fec_imx: add promiscuous mode configuration support
  • From: Johannes Zink <j.zink@xxxxxxxxxxxxxx>
• [PATCH v3 2/8] net: usb: asix: add promisc mode support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 7/8] ARM: boards: skov-imx6: convert all pr_ to dev_ prints
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 6/8] net: dsa: fix of_device_ensure_probed*() for switch ports
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 3/8] ethlog: option to enable/disable promisc mode
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 8/8] ARM: boards: skov-imx6: assigned separate MAC address to LAN2
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 1/8] net: add promiscuous mode configuration support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 5/8] drivers: net: fec_imx: add promiscuous mode configuration support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 4/8] net: dsa: enable promiscuous mode for switch master edev
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] ARM: fix unwinding for XIP kernels
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: i.MX: romapi: Hide using NULL pointers from gcc
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] fs: avoid uninitialized var warning
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] nvmem: remove IS_ERR_VALUE abuses
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] make IS_ERR_VALUE() complain about non-pointer-sized arguments
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH master v2 1/2] ARM: psci: make PSCI method a of_psci_fixup parameter
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] Kbuild: link barebox with -z noexecstack
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master v2 2/2] ARM: psci: client: don't hardcode method smc in fixup
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH master v2 1/2] ARM: psci: make PSCI method a of_psci_fixup parameter
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH] commands: uptime: add note about caveats
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: rk356x: rk3568-evb: add missing new line to log message
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] drivers: net: fec_imx: add promiscuous mode configuration support
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: mach-imx: Add missing ocotp dependency to protonic-imx6 platform
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] net: add promiscuous mode configuration support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] net: dsa: enable promiscuous mode for switch master edev
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] drivers: net: fec_imx: add promiscuous mode configuration support
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] net: dsa: enable promiscuous mode for switch master edev
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] net: add promiscuous mode configuration support
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• [PATCH v2 5/6] ARM: boards: skov-imx6: convert all pr_ to dev_ prints
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 3/6] drivers: net: fec_imx: add promiscuous mode configuration support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 4/6] net: dsa: fix of_device_ensure_probed*() for switch ports
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 2/6] net: dsa: enable promiscuous mode for switch master edev
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 6/6] ARM: boards: skov-imx6: assigned separate MAC address to LAN2
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 1/6] net: add promiscuous mode configuration support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] ARM: mach-imx: Add missing ocotp dependency to protonic-imx6 platform
  • From: Robin van der Gracht <robin@xxxxxxxxxxx>
• Re: [PATCH] Kbuild: link barebox with -z noexecstack
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] Kbuild: link barebox with -z noexecstack
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH 14/14] imx-bbu-nand-fcb: Add fcb command
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 4/4] ARM: boards: skov-imx6: convert all pr_ to dev_ prints
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v1 3/4] ARM: boards: skov-imx6: assigned separate MAC address to LAN2
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/4] drivers: net: fec_imx: fix receive issue with external switch
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 14/14] imx-bbu-nand-fcb: Add fcb command
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 14/14] imx-bbu-nand-fcb: Add fcb command
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: rk356x: rk3568-evb: add missing new line to log message
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v1 4/4] ARM: boards: skov-imx6: convert all pr_ to dev_ prints
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 1/4] drivers: net: fec_imx: fix receive issue with external switch
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 3/4] ARM: boards: skov-imx6: assigned separate MAC address to LAN2
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 2/4] net: dsa: fix of_device_ensure_probed*() for switch ports
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX8M: atf: prefix log messages via pr_fmt()
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] commands: uptime: add note about caveats
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 13/14] ARM: i.MX: xload nand: Implement i.MX7 support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 14/14] imx-bbu-nand-fcb: Add fcb command
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 13/14] ARM: i.MX: xload nand: Implement i.MX7 support
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 12/14] ARM: i.MX: xload nand: Move mxs_nand_mode_fcb_62bit() to header file
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 08/14] ARM: i.MX: xload nand: Pull ECC status checking out of read page
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] include: debug_ll: define puthexc_ll
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 03/14] ARM: i.MX: xload nand: add common readid
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX8M: atf: prefix log messages via pr_fmt()
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: i.MX8MP: increase off-on delay on the SD Vcc regulator
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH 02/14] ARM: i.MX: xload nand: Use common register defines
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 01/14] mtd: nand: nand-mxs: Move register definitions to separate file
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] ARM: socfpga: Fix SDRAM firewall init
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] commands: add new uptime command
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] lib: string: implement mempcpy
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: i.MX8M: atf: prefix log messages via pr_fmt()
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2] test: self: only include ramfs selftest when CONFIG_SELFTEST_FS_RAMFS=y
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] reset: add missing stub for of_reset_control_get()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] net: e1000: fix <NULL>s in log messages
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/5] ARM: i.MX8M: implement bootrom log viewing command
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/5] ARM: i.MX8M: support saving BootROM event log before clobbering OCRAM
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/5] ARM: i.MX8M: esdctl: export imx8m_barebox_earlymem_size
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/5] ARM: asm: set aside new arm_mem_scratch space
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/5] ARM: i.MX8M: define imx8mX_scratch_space() helper
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 0/5] ARM: i.MX8M: implement bootrom log viewing command
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: i.MX8M: atf: prefix log messages via pr_fmt()
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 04/14] dma: apbh-dma: Simplify code
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 02/14] ARM: i.MX: xload nand: Use common register defines
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 01/14] mtd: nand: nand-mxs: Move register definitions to separate file
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 05/14] dma: apbh-dma: unify register defines
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 09/14] ARM: i.MX: xload nand: Use final page layout from FCB
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 14/14] imx-bbu-nand-fcb: Add fcb command
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 03/14] ARM: i.MX: xload nand: add common readid
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 13/14] ARM: i.MX: xload nand: Implement i.MX7 support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 06/14] ARM: i.MX: xload-gpmi-nand: refactor for more SoC support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 12/14] ARM: i.MX: xload nand: Move mxs_nand_mode_fcb_62bit() to header file
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 07/14] imx-bbu-nand-fcb: pull printing debug info out of get_fcb()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 08/14] ARM: i.MX: xload nand: Pull ECC status checking out of read page
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 00/14] Add i.MX7 NAND xload support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 11/14] ARM: i.MX: xload nand: reset NAND before accessing it
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 10/14] imx-bbu-nand-fcb: Fix reading FCB information from BCH registers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: dts: i.MX8MP: increase off-on delay on the SD Vcc regulator
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>