Now that we have an updated NAND driver in place that (exclusively)
supports the new binding, drop our override, so the new driver is
used instead.
Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
---
arch/arm/dts/at91-sama5d3_xplained.dts | 26 --------------------------
arch/arm/dts/sama5d3.dtsi | 16 ----------------
2 files changed, 42 deletions(-)
diff --git a/arch/arm/dts/at91-sama5d3_xplained.dts b/arch/arm/dts/at91-sama5d3_xplained.dts
index cdb29ca6669e..b734457214eb 100644
--- a/arch/arm/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/dts/at91-sama5d3_xplained.dts
@@ -22,29 +22,3 @@
/* Will be automatically read back from HW */
/delete-node/ &{/memory@20000000};
-
-&nand_controller {
- nand@3 {
- compatible = "atmel,at91rm9200-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = < 0x60000000 0x01000000 /* EBI CS3 */
- 0xffffc070 0x00000490 /* SMC PMECC regs */
- 0xffffc500 0x00000100 /* SMC PMECC Error Location regs */
- 0x00110000 0x00018000 /* ROM code */
- >;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
- atmel,nand-addr-offset = <21>;
- atmel,nand-cmd-offset = <22>;
- atmel,nand-has-dma;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_nand0_ale_cle>;
- atmel,pmecc-lookup-table-offset = <0x10000 0x8000>;
-
- atmel,has-pmecc;
- atmel,pmecc-cap = <4>;
- atmel,pmecc-sector-size = <512>;
- status = "okay";
- };
-};
-
diff --git a/arch/arm/dts/sama5d3.dtsi b/arch/arm/dts/sama5d3.dtsi
index 2301ad135b3b..84fc1d0ed431 100644
--- a/arch/arm/dts/sama5d3.dtsi
+++ b/arch/arm/dts/sama5d3.dtsi
@@ -5,19 +5,3 @@
mmc1 = &mmc1;
};
};
-
-&ebi {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
-};
-
-&nand_controller {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
-};
--
2.30.2
