From: Johannes Schneider <johannes.schneider@xxxxxxxxxxxxxxxxxxxx>
This commit adds support for the 8MMINILPD4-CPU2 board. This board
replaced the ROHM BD71847 by the NXP PCA9450. The pbl PMIC configuration
is taken from upstream u-boot v2023.01.
Signed-off-by: Johannes Schneider <johannes.schneider@xxxxxxxxxxxxxxxxxxxx>
[m.felsch@xxxxxxxxxxxxxx: Adapt commit message]
[m.felsch@xxxxxxxxxxxxxx: Fix pmic configuration settings to align with u-boot]
[m.felsch@xxxxxxxxxxxxxx: Add dedicated dts support]
[m.felsch@xxxxxxxxxxxxxx: Include Ahmad's review feedback]
Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
---
Hi,
I pocked Johannes v2 [1] and added the review feedback from Ahmad.
[1] <20230111100111.677018-1-johannes.schneider@xxxxxxxxxxxxxxxxxxxx>.
arch/arm/boards/nxp-imx8mm-evk/board.c | 5 +-
arch/arm/boards/nxp-imx8mm-evk/lowlevel.c | 50 ++++++++-
arch/arm/dts/Makefile | 2 +-
arch/arm/dts/imx8mm-evkb.dts | 122 ++++++++++++++++++++++
4 files changed, 170 insertions(+), 9 deletions(-)
create mode 100644 arch/arm/dts/imx8mm-evkb.dts
diff --git a/arch/arm/boards/nxp-imx8mm-evk/board.c b/arch/arm/boards/nxp-imx8mm-evk/board.c
index db694943e5..76d669f1a7 100644
--- a/arch/arm/boards/nxp-imx8mm-evk/board.c
+++ b/arch/arm/boards/nxp-imx8mm-evk/board.c
@@ -60,9 +60,8 @@ static int imx8mm_evk_probe(struct device_d *dev)
}
static const struct of_device_id imx8mm_evk_of_match[] = {
- {
- .compatible = "fsl,imx8mm-evk",
- },
+ { .compatible = "fsl,imx8mm-evk", },
+ { .compatible = "fsl,imx8mm-evkb", },
{ /* sentinel */ }
};
diff --git a/arch/arm/boards/nxp-imx8mm-evk/lowlevel.c b/arch/arm/boards/nxp-imx8mm-evk/lowlevel.c
index 6132df53ec..5861d8d8be 100644
--- a/arch/arm/boards/nxp-imx8mm-evk/lowlevel.c
+++ b/arch/arm/boards/nxp-imx8mm-evk/lowlevel.c
@@ -16,12 +16,11 @@
#include <mach/iomux-mx8mm.h>
#include <mach/imx8m-ccm-regs.h>
#include <mfd/bd71837.h>
+#include <mfd/pca9450.h>
#include <mach/xload.h>
#include <soc/imx8m/ddr.h>
#include <image-metadata.h>
-extern char __dtb_z_imx8mm_evk_start[];
-
#define UART_PAD_CTRL MUX_PAD_CTRL(PAD_CTL_DSE_3P3V_45_OHM)
static void setup_uart(void)
@@ -38,6 +37,32 @@ static void setup_uart(void)
putc_ll('>');
}
+static struct pmic_config pca9450_cfg[] = {
+ /* BUCKxOUT_DVS0/1 control BUCK123 output */
+ { PCA9450_BUCK123_DVS, 0x29 },
+
+ /* Buck 1 DVS control through PMIC_STBY_REQ */
+ { PCA9450_BUCK1CTRL, 0x59 },
+
+ /* Set DVS1 to 0.8v for suspend */
+ { PCA9450_BUCK1OUT_DVS1, 0x10 },
+
+ /* increase VDD_DRAM to 0.95v for 3Ghz DDR */
+ { PCA9450_BUCK3OUT_DVS0, 0x1c },
+
+ /*
+ * VDD_DRAM needs off in suspend, set B1_ENMODE=10
+ * (ON by PMIC_ON_REQ = H && PMIC_STBY_REQ = L)
+ */
+ { PCA9450_BUCK3CTRL, 0x4a },
+
+ /* set VDD_SNVS_0V8 from default 0.85V */
+ { PCA9450_LDO2CTRL, 0xc0 },
+
+ /* set WDOG_B_CFG to cold reset */
+ { PCA9450_RESET_CTRL, 0xa1 },
+};
+
static struct pmic_config bd71837_cfg[] = {
/* decrease RESET key long push time from the default 10s to 10ms */
{ BD718XX_PWRONCONFIG1, 0x0 },
@@ -63,7 +88,10 @@ static void power_init_board(void)
i2c = imx8m_i2c_early_init(IOMEM(MX8MQ_I2C1_BASE_ADDR));
- pmic_configure(i2c, 0x4b, bd71837_cfg, ARRAY_SIZE(bd71837_cfg));
+ if (i2c_dev_probe(i2c, 0x25, true) == 0)
+ pmic_configure(i2c, 0x25, pca9450_cfg, ARRAY_SIZE(pca9450_cfg));
+ else
+ pmic_configure(i2c, 0x4b, bd71837_cfg, ARRAY_SIZE(bd71837_cfg));
}
extern struct dram_timing_info imx8mm_evk_dram_timing;
@@ -102,14 +130,26 @@ static void start_atf(void)
*/
static __noreturn noinline void nxp_imx8mm_evk_start(void)
{
+ extern char __dtb_z_imx8mm_evk_start[], __dtb_z_imx8mm_evkb_start[];
+ struct pbl_i2c *i2c;
+ void *fdt;
+
setup_uart();
start_atf();
/*
- * Standard entry we hit once we initialized both DDR and ATF
+ * Standard entry we hit once we initialized both DDR and ATF. I2C pad
+ * and clock setup already done during power_init_board().
*/
- imx8mm_barebox_entry(__dtb_z_imx8mm_evk_start);
+ i2c = imx8m_i2c_early_init(IOMEM(MX8MQ_I2C1_BASE_ADDR));
+
+ if (i2c_dev_probe(i2c, 0x25, true) == 0)
+ fdt = __dtb_z_imx8mm_evkb_start;
+ else
+ fdt = __dtb_z_imx8mm_evk_start;
+
+ imx8mm_barebox_entry(fdt);
}
ENTRY_FUNCTION(start_nxp_imx8mm_evk, r0, r1, r2)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 5ceb97129f..b6131bf072 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -141,7 +141,7 @@ lwl-$(CONFIG_MACH_SCB9328) += imx1-scb9328.dtb.o
lwl-$(CONFIG_MACH_TECHNEXION_WANDBOARD) += imx6q-wandboard.dtb.o imx6dl-wandboard.dtb.o
lwl-$(CONFIG_MACH_TECHNEXION_PICO_HOBBIT) += imx6ul-pico-hobbit.dtb.o
lwl-$(CONFIG_MACH_NXP_IMX6ULL_EVK) += imx6ull-14x14-evk.dtb.o
-lwl-$(CONFIG_MACH_NXP_IMX8MM_EVK) += imx8mm-evk.dtb.o
+lwl-$(CONFIG_MACH_NXP_IMX8MM_EVK) += imx8mm-evk.dtb.o imx8mm-evkb.dtb.o
lwl-$(CONFIG_MACH_NXP_IMX8MN_EVK) += imx8mn-evk.dtb.o imx8mn-ddr4-evk.dtb.o
lwl-$(CONFIG_MACH_NXP_IMX8MP_EVK) += imx8mp-evk.dtb.o
lwl-$(CONFIG_MACH_NXP_IMX8MQ_EVK) += imx8mq-evk.dtb.o
diff --git a/arch/arm/dts/imx8mm-evkb.dts b/arch/arm/dts/imx8mm-evkb.dts
new file mode 100644
index 0000000000..b7d3be7a84
--- /dev/null
+++ b/arch/arm/dts/imx8mm-evkb.dts
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017 NXP
+ * Copyright (C) 2017 Pengutronix, Lucas Stach <kernel@xxxxxxxxxxxxxx>
+ * Copyright (C) 2023 Pengutronix, Marco Felsch <kernel@xxxxxxxxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include <arm64/freescale/imx8mm-evk.dts>
+#include "imx8mm.dtsi"
+#include "imx8mm-evk.dtsi"
+
+/ {
+ model = "FSL i.MX8MM EVKB";
+ compatible = "fsl,imx8mm-evkb", "fsl,imx8mm";
+};
+
+&i2c1 {
+ /delete-node/ pmic@4b;
+
+ pmic@25 {
+ compatible = "nxp,pca9450a";
+ reg = <0x25>;
+ pinctrl-0 = <&pinctrl_pmic>;
+ pinctrl-names = "default";
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ buck1_reg: BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ nxp,dvs-run-voltage = <820000>;
+ nxp,dvs-standby-voltage = <800000>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "BUCK3";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "BUCK5";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "BUCK6";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "LDO2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "LDO3";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "LDO4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+};
--
2.30.2
