Tested on an i.MX8MN board communicating with the switch
over I2C. The IC says KSZ9563RNXI, but is detected as KSZ9893:
ksz9477-i2c ksz85630: Found KSZ9893
ksz9477-i2c ksz85630: chip id: 0x00989360
This is the same in Linux, but switch works though. I2C support
will follow separately.
Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
---
drivers/net/ksz9477.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ksz9477.c b/drivers/net/ksz9477.c
index 0629efbd7d02..1da57736f2ea 100644
--- a/drivers/net/ksz9477.c
+++ b/drivers/net/ksz9477.c
@@ -469,6 +469,7 @@ static int microchip_switch_probe(struct device *dev)
}
static const struct of_device_id microchip_switch_dt_ids[] = {
+ { .compatible = "microchip,ksz8563" },
{ .compatible = "microchip,ksz9477" },
{ .compatible = "microchip,ksz9563" },
{ }
--
2.30.2
