On Wed, Jan 11, 2023 at 06:39:20PM +0100, Ahmad Fatoum wrote:
> read_poll_timeout assumes microsecond timeouts, not nanoseconds. One
> second instead of a thousand is still plenty time when polling for a
> MCI controller to change state, so use that.
>
> Fixes: 4fc0369b1a55 ("mci: atmel_mci: add PBL support")
> Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
> ---
> drivers/mci/atmel_mci_common.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/drivers/mci/atmel_mci_common.c b/drivers/mci/atmel_mci_common.c
> index c8e21933fe51..99e65adb2cf0 100644
> --- a/drivers/mci/atmel_mci_common.c
> +++ b/drivers/mci/atmel_mci_common.c
> @@ -90,8 +90,8 @@ static int atmci_poll_status(struct atmel_mci *host, u32 mask)
> u32 stat;
> int ret;
>
> - ret = read_poll_timeout(atmci_readl, stat, (stat & mask), SECOND, host,
> - ATMCI_SR);
> + ret = read_poll_timeout(atmci_readl, stat, (stat & mask), USEC_PER_SEC,
> + host, ATMCI_SR);
> if (ret < 0) {
> dev_err(host->hw_dev, "timeout\n");
> host->need_reset = true;
> --
> 2.30.2
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
