This patch series introduces support for the Novena board. This support is basic but enough to boot Barebox. The EEPROM code here is included in anticipation for reading the features flag in the future when more board features are supported. Changes v1 -> v2: - The board uses the driver model now - Memory density is now calculated correctly John Watts (4): ARM: novena: Add Kosagi Novena board ARM: novena: Setup RAM using static configuration ARM: novena: Read Ethernet MAC address from EEPROM ARM: novena: Use DDR3 information from SPD EEPROM arch/arm/boards/Makefile | 1 + arch/arm/boards/novena/Makefile | 4 + arch/arm/boards/novena/board.c | 114 ++++++++++ arch/arm/boards/novena/ddr_regs.h | 119 +++++++++++ .../boards/novena/flash-header-novena.imxcfg | 6 + arch/arm/boards/novena/lowlevel.c | 198 ++++++++++++++++++ arch/arm/configs/imx_v7_defconfig | 1 + arch/arm/dts/Makefile | 1 + arch/arm/dts/imx6q-novena.dts | 19 ++ arch/arm/mach-imx/Kconfig | 8 + images/Makefile.imx | 2 + 11 files changed, 473 insertions(+) create mode 100644 arch/arm/boards/novena/Makefile create mode 100644 arch/arm/boards/novena/board.c create mode 100644 arch/arm/boards/novena/ddr_regs.h create mode 100644 arch/arm/boards/novena/flash-header-novena.imxcfg create mode 100644 arch/arm/boards/novena/lowlevel.c create mode 100644 arch/arm/dts/imx6q-novena.dts -- 2.39.0
