On Wed, Jan 25, 2023 at 03:33:18PM +0100, Ahmad Fatoum wrote:
> On 25.01.23 15:28, John Watts wrote:
> > On Wed, Jan 25, 2023 at 03:16:05PM +0100, Ahmad Fatoum wrote:
> >> We could add the binding to the barebox AT24/AT25 driver. We'll need
> >> to make sure we don't fail the probe in the error path as not to
> >> break existing users. Fortunately, with deep probe, we will
> >> have no -EPROBE_DEFER that would complicate this.
> >
> > I'm really not sure if specifying the regulator (that should always be on) for
> > every possible node is a good idea. I'd need to add -supply properties to:
> >
> > - USB
> > - Sata
> > - HDMI
> > - SD cards
> > - Ethernet
> > - PCIe
> > - FPGA
> > - I2C
> > - UART
>
> What voltage does your UART require that you don't already have when
> your SoC is powered up? anyways, I still see utility in observing
> the vcc-supply upstream bindings for EEPROMs.
These are used for pull-up/pull-down resistors.
> Add an of_devices_ensure_probed_by_property("regulator-boot-enabled") or
> something to the start of your machine's board driver then.
Hmm. Probing for regulator-always-on and regular-boot-on seems to fix my issue.
John.
