Pulseaudio Discussion - Date Index

• Thread Index

• Bluetooth assert
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• RFC: Change the device-restore database to allow per-port volumes
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: ashwani.kumar@xxxxxxxxxxxxxxx (ashwanik)
• Bluetooth assert
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: ashwani.kumar@xxxxxxxxxxxxxxx (ashwanik)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: abdulmoiz786@xxxxxxxxx (ABDUL MOIZ)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• RFC: Change the device-restore database to allow per-port volumes
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Set better priorities on input paths
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: abdulmoiz786@xxxxxxxxx (ABDUL MOIZ)
• C++!
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: abdulmoiz786@xxxxxxxxx (ABDUL MOIZ)
• C++!
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [pulseaudio-commits] src/pulsecore
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [pulseaudio-commits] src/pulsecore
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [pulseaudio-commits] src/pulsecore
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Making locking nicer for NFS
  • From: tbushnell@xxxxxxxxxx (Thomas Bushnell, BSG)
• Making locking nicer for NFS
  • From: tbushnell@xxxxxxxxxx (Thomas Bushnell, BSG)
• Making locking nicer for NFS
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• RFC: Change the device-restore database to allow per-port volumes
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• RFC: Change the device-restore database to allow per-port volumes
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• sound works in console, but not in X, what gives?
  • From: pulseaudio@xxxxxxxxxxxxxxxxxxx (pulseaudio@xxxxxxxxxxxxxxxxxxx)
• [PATCH 4/4] sndfile-util: Check return value of sf_command for errors
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• PATCH: Some spelling fixes
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: abdulmoiz786@xxxxxxxxx (ABDUL MOIZ)
• sound works in console, but not in X, what gives?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• sound works in console, but not in X, what gives?
  • From: jan.steffens@xxxxxxxxx (Jan Steffens)
• [PATCH 2/2] device-restore: Restore volumes on port change.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 1/2] device-restore: Split device restore database into two parts.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• RFC: Change the device-restore database to allow per-port volumes
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• No subject
  • From: bogus@xxxxxxxxxxxxxxxxxx ()
• [PATCH 4/4] sndfile-util: Check return value of sf_command for errors
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 3/4] Remove extra ; s where they are not allowed in strict C99
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 2/4] echo-cancel: Use stream index in debug message
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 1/4] gitignore: Add Orc autogenerated files
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• [PATCH 2/2] More spelling fixes
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 1/2] Spelling fixes in public headers
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• PATCH: Some spelling fixes
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 1/2] module-switch-on-connect: Don't switch to a monitoring source
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 1/2] module-switch-on-connect: Don't switch to a monitoring source
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• [PATCH 1/2] module-switch-on-connect: Don't switch to a monitoring source
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 2/2] Fix spelling sucess -> success
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 1/2] module-switch-on-connect: Don't switch to a monitoring source
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] pacat: make pacat respond to cork/uncork events
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• Newbie: controlling volume through command line
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] pacat: make pacat respond to cork/uncork events
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Newbie: controlling volume through command line
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Newbie: controlling volume through command line
  • From: jester@xxxxxxxxx (Jesse Sheidlower)
• [PATCH] pacat: make pacat respond to cork/uncork events
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] pacat: make pacat respond to cork/uncork events
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• [PATCH] pacat: make pacat respond to cork/uncork events
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• RTP output time between packets
  • From: emo@xxxxxxx (Emil Ohlsson)
• [PATCH] pacat: make pacat respond to cork/uncork events
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• sound works in console, but not in X, what gives?
  • From: pulseaudio@xxxxxxxxxxxxxxxxxxx (pulseaudio@xxxxxxxxxxxxxxxxxxx)
• alsa-sink: snd_pcm_avail() returns a huge value...but not alsa's bug
  • From: wangxingchao2011@xxxxxxxxx (Wang Xingchao)
• unable to play very small beep (.wav) sounds
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• unable to play very small beep (.wav) sounds
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v3 2/2] bluetooth: Do not unload module-bluetooth-device on ERR or HUP
  • From: frederic.dalleau@xxxxxxxxxxxxxxx (Frédéric Dalleau)
• [PATCH v3 1/2] bluetooth: Fix Media Endpoint for HandsfreeGateway
  • From: frederic.dalleau@xxxxxxxxxxxxxxx (Frédéric Dalleau)
• [PATCH v3 0/2] bluetooth: Fix Media Endpoint for HandsfreeGateway
  • From: frederic.dalleau@xxxxxxxxxxxxxxx (Frédéric Dalleau)
• alsa-sink: snd_pcm_avail() returns a huge value...but not alsa's bug
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• RTP output time between packets
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• alsa-sink: snd_pcm_avail() returns a huge value...but not alsa's bug
  • From: wangxingchao2011@xxxxxxxxx (Wang Xingchao)
• [PATCH v2 2/2] bluetooth: Do not unload module-bluetooth-device on ERR or HUP
  • From: frederic.dalleau@xxxxxxxxxxxxxxx (Frédéric Dalleau)
• [PATCH v2 1/2] bluetooth: Fix Media Endpoint for HandsfreeGateway
  • From: frederic.dalleau@xxxxxxxxxxxxxxx (Frédéric Dalleau)
• [PATCH v2 0/2] bluetooth: Fix Media Endpoint for HandsfreeGateway
  • From: frederic.dalleau@xxxxxxxxxxxxxxx (Frédéric Dalleau)
• unable to play very small beep (.wav) sounds
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• No subject
  • From: bogus@xxxxxxxxxxxxxxxxxx ()
• RTP output time between packets
  • From: emo@xxxxxxx (Emil Ohlsson)
• VLC, PulseAudio and large tlengths
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• How's the integration of UCM into pulseaudio?
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• Making locking nicer for NFS
  • From: tbushnell@xxxxxxxxxx (Thomas Bushnell, BSG)
• unable to play very small beep (.wav) sounds
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Making locking nicer for NFS
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• VLC, PulseAudio and large tlengths
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• VLC, PulseAudio and large tlengths
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• VLC, PulseAudio and large tlengths
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• VLC, PulseAudio and large tlengths
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• Making locking nicer for NFS
  • From: tbushnell@xxxxxxxxxx (Thomas Bushnell, BSG)
• VLC, PulseAudio and large tlengths
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• VLC, PulseAudio and large tlengths
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• VLC, PulseAudio and large tlengths
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• VLC, PulseAudio and large tlengths
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• VLC, PulseAudio and large tlengths
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• unable to play very small beep (.wav) sounds
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Making locking nicer for NFS
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• VLC, PulseAudio and large tlengths
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Making locking nicer for NFS
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Making locking nicer for NFS
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• VLC, PulseAudio and large tlengths
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• VLC, PulseAudio and large tlengths
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• VLC, PulseAudio and large tlengths
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• VLC, PulseAudio and large tlengths
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• Making locking nicer for NFS
  • From: tbushnell@xxxxxxxxxx (Thomas Bushnell, BSG)
• VLC, PulseAudio and large tlengths
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Pulse-cookie locking in NFS causes 30 second delays
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Pulse-cookie locking in NFS causes 30 second delays
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• unable to play very small beep (.wav) sounds
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• Pulse-cookie locking in NFS causes 30 second delays
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• How's the integration of UCM into pulseaudio?
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• bools and bit-fields
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• pa_mix 32Bit write for S16NE format
  • From: ghankp@xxxxxxxxx (kuldeep ghan)
• bools and bit-fields
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• bools and bit-fields
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• pa_mix 32Bit write for S16NE format
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• bools and bit-fields
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• pa_mix 32Bit write for S16NE format
  • From: ghankp@xxxxxxxxx (kuldeep ghan)
• RFC: Adding an enum to identify device types (sink vs. source)
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• pa_mix 32Bit write for S16NE format
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• pa_mix 32Bit write for S16NE format
  • From: ghankp@xxxxxxxxx (kuldeep ghan)
• pa_mix 32Bit write for S16NE format
  • From: ghankp@xxxxxxxxx (kuldeep ghan)
• pa_mix 32Bit write for S16NE format
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• pa_mix 32Bit write for S16NE format
  • From: ghankp@xxxxxxxxx (kuldeep ghan)
• [PATCH] alsa: New modarg "paths_dir" for module-alsa-card.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] alsa: New modarg "paths_dir" for module-alsa-card.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• ANNOUNCE: PulseAudio 1.0 test release 2
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 0/4] Patches to be upstreamed from Ubuntu
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• ANNOUNCE: PulseAudio 1.0 test release 2
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Make pulse build with clang again
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] Plug some memory leaks and an invalid read
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Plug some memory leaks and an invalid read
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] update process_usec before enter sleep
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] pactl: Add set-source-output-mute command
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] default.pa: Update rtp null sink line
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Initialise write_volume
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Plug some memory leaks and an invalid read
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] pactl: Add set-source-output-mute command
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] default.pa: Update rtp null sink line
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] Plug some memory leaks and an invalid read
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] Initialise write_volume
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] Initialise write_volume callback
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] Initialise write_volume callback
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 2/2] alsa-{sink, source}: Guard for uninitialised volume_sleep
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 1/2] Initialise write_volume
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] Initialise write_volume callback
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [patch] avoid fake rewind when setting cork state
  • From: wangxingchao2011@xxxxxxxxx (Wang Xingchao)
• [PATCH 4/4] Remove offensive part of error message
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 3/4] JACK: Load module-jackdbus-detect in default.pa
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 2/4] alsa-mixer: Add "Line HP Swap" element
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 1/4] alsa-mixer: Mute IEC958 optical raw for several Audigy models
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 0/4] Patches to be upstreamed from Ubuntu
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] Plug some memory leaks and an invalid read
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Protocol version 24 hereby reserved
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [patch] avoid fake rewind when setting cork state
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] bluetooth: Fix Media Endpoint for HandsfreeGateway
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• [PATCH 1/2] memblock: fix memory leak when pa_shm_create_rw fails
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 1/2] memblock: fix memory leak when pa_shm_create_rw fails
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• [PATCH] bluetooth: Fix Media Endpoint for HandsfreeGateway
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH 1/2] memblock: fix memory leak when pa_shm_create_rw fails
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 2/2] memblock: use built-in function
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• [PATCH 1/2] memblock: fix memory leak when pa_shm_create_rw fails
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• [PATCH] memblock: fix memory leak when pa_shm_create_rw fails
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• [RFC][PATCH] Initialise write_volume callback
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [RFC][PATCH] Initialise write_volume callback
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] daemon-conf: Don't make log files executable.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] svolume: Make log messages more precise.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [patch] avoid fake rewind when setting cork state
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] svolume: Make log messages more precise.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 4/4] Avoid read from freed memory
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 3/4] Initialise variables
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 2/4] Plug some memory leaks
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 1/4] module-tunnel: Fix for new protocol versions
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] daemon-conf: Don't make log files executable.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [patch] avoid fake rewind when setting cork state
  • From: wangxingchao2011@xxxxxxxxx (Wang Xingchao)
• Spaces in proplist in module args
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [patch] avoid fake rewind when setting cork state
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Automatic muting of multiple applications
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Plug some memory leaks and an invalid read
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] bluetooth: Fix Media Endpoint for HandsfreeGateway
  • From: frederic.dalleau@xxxxxxxxxxxxxxx (Frédéric Dalleau)
• [PATCH] bluetooth: Fix Media Endpoint for HandsfreeGateway
  • From: frederic.dalleau@xxxxxxxxxxxxxxx (Frédéric Dalleau)
• [PATCH] Plug some memory leaks and an invalid read
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Automatic muting of multiple applications
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Automatic muting of multiple applications
  • From: joh@xxxxxxxxxxxxxxxxx (Johannes H. Jensen)
• [PATCH] Plug some memory leaks and an invalid read
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 3/3] Move i18n.[ch] to src/pulsecore
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: ashwani.kumar@xxxxxxxxxxxxxxx (ashwanik)
• [PATCH] Plug some memory leaks and an invalid read
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] Plug some memory leaks and an invalid read
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: ashwani.kumar@xxxxxxxxxxxxxxx (ashwanik)
• [RFC] core: New hook: PA_CORE_HOOK_SINK_INPUT_PUT_PRE.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [RFC] core: New hook: PA_CORE_HOOK_SINK_INPUT_PUT_PRE.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: ashwani.kumar@xxxxxxxxxxxxxxx (ashwanik)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: ashwani.kumar@xxxxxxxxxxxxxxx (ashwanik)
• [RFC] core: New hook: PA_CORE_HOOK_SINK_INPUT_PUT_PRE.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Need help to enable echo cancel in pulseaudio
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Pops/Crackles Messing up my audio...
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [patch] avoid fake rewind when setting cork state
  • From: wangxingchao2011@xxxxxxxxx (Wang Xingchao)
• [PATCH] update process_usec before enter sleep
  • From: wangxingchao2011@xxxxxxxxx (Wang Xingchao)
• [PATCH] Plug some memory leaks and an invalid read
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] Plug some memory leaks and an invalid read
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH v2] thread-posix: remove duplicate code for setting thread name
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• Pops/Crackles Messing up my audio...
  • From: nasa01@xxxxxxxxxxx (Nasa)
• [PATCH 3/3] Move i18n.[ch] to src/pulsecore
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• [PATCH 3/3] Move i18n.[ch] to src/pulsecore
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• [PATCH] i18n: po file fixes
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• Need help to reduce delay with USB, mic using pulseaudio
  • From: ashwani.kumar@xxxxxxxxxxxxxxx (ashwanik)
• understanding PA cork/uncorking scenarios
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• [PATCH] update process_usec before enter sleep
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• alsa-sink: fix revents bug when meet underrun
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• alsa-sink: fix revents bug when meet underrun
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• [patch] avoid fake rewind when setting cork state
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PulseAudio-Discuss] PulseAudio System Timer Requirements
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• How to avoid module-echo-cancel's "Echo-Cancel Source Stream" being created on a monitor source of an ALSA sink? If module-echo-cancel is loaded before the ALSA source is created.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Need help to reduce delay with USB mic using pulseaudio
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Need help to enable echo cancel in pulseaudio
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Debugging tsched issues
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• understanding PA cork/uncorking scenarios
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• alsa-sink: fix revents bug when meet underrun
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 4/4] Profiles can have sink and source ports, and announce that through the API.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] update process_usec before enter sleep
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Pulseaudio A2DP audio delay problem
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 3/3] Move i18n.[ch] to src/pulsecore
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH v2] thread-posix: remove duplicate code for setting thread name
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH v2] thread-posix: remove duplicate code for setting thread name
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• Automatic muting of multiple applications
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 2/2] sample-util: use built-in function
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH v2] thread-posix: remove duplicate code for setting thread name
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH v2] thread-posix: remove duplicate code for setting thread name
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• [PATCH 1/2] thread-posix: remove duplicate code for setting thread name
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• Automatic muting of multiple applications
  • From: killerkiwi2005@xxxxxxxxx (Jason Taylor)
• [PATCH] null pointer check when setting volume
  • From: wangxingchao2011@xxxxxxxxx (wangxingchao2011@xxxxxxxxx)
• long delay after "paplay -s somehost foo.wav"
  • From: pgf@xxxxxxxxxxxxxxxxxxxx (Paul Fox)
• long delay after "paplay -s somehost foo.wav"
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• long delay after "paplay -s somehost foo.wav"
  • From: pgf@xxxxxxxxxxxxxxxxxxxx (Paul Fox)
• long delay after "paplay -s somehost foo.wav"
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• long delay after "paplay -s somehost foo.wav"
  • From: pgf@xxxxxxxxxxxxxxxxxxxx (Paul Fox)
• [PATCH 1/2] thread-posix: remove duplicate code for setting thread name
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 2/2] sample-util: use built-in function
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• [PATCH 1/2] thread-posix: remove duplicate code for setting thread name
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• long delay after "paplay -s somehost foo.wav"
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• [PATCH] null pointer check when setting volume
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• long delay after "paplay -s somehost foo.wav"
  • From: pgf@xxxxxxxxxxxxxxxxxxxx (Paul Fox)
• [PATCH] null pointer check when setting volume
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• Automatic muting of multiple applications
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• [PATCH] null pointer check when setting volume
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 3/3] Move i18n.[ch] to src/pulsecore
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 3/3] Move i18n.[ch] to src/pulsecore
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 2/3] Add some missing format.h includes
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 1/3] Include config.h consistently in source files and not in headers
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Pulseaudio A2DP audio delay problem
  • From: orschiro@xxxxxxxxxxxxxx (orschiro@xxxxxxxxxxxxxx)
• Automatic muting of multiple applications
  • From: joh@xxxxxxxxxxxxxxxxx (Johannes H. Jensen)
• long delay after "paplay -s somehost foo.wav"
  • From: pgf@xxxxxxxxxxxxxxxxxxxx (Paul Fox)
• [RFC] core: New hook: PA_CORE_HOOK_SINK_INPUT_PUT_PRE.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• long delay after "paplay -s somehost foo.wav"
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] thread: Add an optional index to the thread names.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 04/25] printout pthread id number in pulseaudio log
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Automatic muting of multiple applications
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Automatic muting of multiple applications
  • From: joh@xxxxxxxxxxxxxxxxx (Johannes H. Jensen)
• Pulseaudio A2DP audio delay problem
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] update process_usec before enter sleep
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] update process_usec before enter sleep
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• Pulseaudio A2DP audio delay problem
  • From: orschiro@xxxxxxxxxxxxxx (orschiro@xxxxxxxxxxxxxx)
• Pops/Crackles Messing up my audio...
  • From: nasa01@xxxxxxxxxxx (Nasa)
• [PATCH 04/25] printout pthread id number in pulseaudio log
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• [PATCH 04/25] printout pthread id number in pulseaudio log
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• What can cause assertion '!s->thread_info.rewind_requested' failure in function pa_sink_render_into_full( ) of sink.c
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [Alsa-user] Pops/Crackles Messing up my audio...
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• long delay after "paplay -s somehost foo.wav"
  • From: pgf@xxxxxxxxxxxxxxxxxxxx (Paul Fox)
• Pulseaudio A2DP audio delay problem
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [RFC] core: New hook: PA_CORE_HOOK_SINK_INPUT_PUT_PRE.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• No subject
  • From: bogus@xxxxxxxxxxxxxxxxxx ()
• [PATCH 4/4] Profiles can have sink and source ports, and announce that through the API.
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• [Alsa-user] Pops/Crackles Messing up my audio...
  • From: nasa01@xxxxxxxxxxx (Nasa)
• [PATCH 4/4] Profiles can have sink and source ports, and announce that through the API.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• What can cause assertion '!s->thread_info.rewind_requested' failure in function pa_sink_render_into_full( ) of sink.c
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• [PATCH] Fix default.pa on non udev systems
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Pops/Crackles Messing up my audio...
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 04/25] printout pthread id number in pulseaudio log
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• [PATCH 04/25] printout pthread id number in pulseaudio log
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• What can cause assertion '!s->thread_info.rewind_requested' failure in function pa_sink_render_into_full( ) of sink.c
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• No subject
  • From: bogus@xxxxxxxxxxxxxxxxxx ()
• [PATCH 04/25] printout pthread id number in pulseaudio log
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• What can cause assertion '!s->thread_info.rewind_requested' failure in function pa_sink_render_into_full( ) of sink.c
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• [PATCH 04/25] printout pthread id number in pulseaudio log
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• [PATCH] log: add thread name
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• [PATCH] module: shuffle the sequence of acquiring the module index
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• Pops/Crackles Messing up my audio...
  • From: nasa01@xxxxxxxxxxx (Nasa)
• Pops/Crackles Messing up my audio...
  • From: nasa01@xxxxxxxxxxx (Nasa)
• Pulseaudio A2DP audio delay problem
  • From: orschiro@xxxxxxxxxxxxxx (orschiro@xxxxxxxxxxxxxx)
• PulseAudio crashes when setting a source output volume
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] source-output: Fix resampling.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• PulseAudio crashes when setting a source output volume
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] update process_usec before enter sleep
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 04/25] printout pthread id number in pulseaudio log
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 3/3] pactl: Split help string up in shorter pieces for easier translation
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 2/3] pactl: Short --help output a bit by consolidating sink/source commands
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 1/3] pactl: Update manpage
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Pulseaudio A2DP audio delay problem
  • From: orschiro@xxxxxxxxxxxxxx (orschiro@xxxxxxxxxxxxxx)
• Pulseaudio A2DP audio delay problem
  • From: orschiro@xxxxxxxxxxxxxx (orschiro@xxxxxxxxxxxxxx)
• [PATCH 04/25] printout pthread id number in pulseaudio log
  • From: wangxingchao2011@xxxxxxxxx (wangxingchao2011@xxxxxxxxx)
• [PATCH] update process_usec before enter sleep
  • From: wangxingchao2011@xxxxxxxxx (wangxingchao2011@xxxxxxxxx)
• [PATCH] update process_usec before enter sleep
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• alsa-sink: fix revents bug when meet underrun
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• [PATCH 04/25] printout pthread id number in pulseaudio log
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• [PATCH] Fix default.pa on non udev systems
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [patch] avoid fake rewind when setting cork state
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] update process_usec before enter sleep
  • From: xingchao.wang@xxxxxxxxx (xingchao)
• [patch] avoid fake rewind when setting cork state
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• alsa-sink: fix revents bug when meet underrun
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• alsa-sink: fix revents bug when meet underrun
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• Pavucontrol level meter bug (at least on "Input Devices")
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Pavucontrol level meter bug (at least on "Input Devices")
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• raop: Patch for variable port number
  • From: erik@xxxxxxx (Erik Ekman)
• PulseAudio crashes when setting a source output volume
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Pavucontrol level meter bug (at least on "Input Devices")
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Pavucontrol level meter bug (at least on "Input Devices")
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 3/4] pactl: Separate stat and info actions
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 3/4] pactl: Separate stat and info actions
  • From: seven.steps@xxxxxxxxx (Dan Chen)
• [PATCH] Fix crash in path subset elimination
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 3/4] pactl: Separate stat and info actions
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Pavucontrol level meter bug (at least on "Input Devices")
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Headset-detection
  • From: broonie@xxxxxxxxxxxxx (Mark Brown)
• Pavucontrol level meter bug (at least on "Input Devices")
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 3/4] pactl: Separate stat and info actions
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] Fix crash in path subset elimination
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] protocol-native: Allow clients to know at what index underrun occurred
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] Document PA_COMMAND_UNDERFLOW protocol change
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Can some pulseaudio modules support multi-instances?
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Can some pulseaudio modules support multi-instances?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• How to use pa_sink_input_kill( )?
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• How to use pa_sink_input_kill( )?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• How to use pa_sink_input_kill( )?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• Headset-detection
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Audiophile newbie reporting in
  • From: mike@xxxxxxxxxx (Michael Cronenworth)
• understanding PA cork/uncorking scenarios
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• Headset-detection
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• Audiophile newbie reporting in
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Need help to reduce delay with USB mic using pulseaudio
  • From: abdulmoiz786@xxxxxxxxx (ABDUL MOIZ)
• ANNOUNCE: PulseAudio 1.0 test release 1
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] protocol-native: Allow clients to know at what index underrun occurred
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• ANNOUNCE: PulseAudio 1.0 test release 1
  • From: jan.steffens@xxxxxxxxx (Jan Steffens)
• ANNOUNCE: PulseAudio 1.0 test release 1
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• (no subject)
  • From: baeksan@xxxxxxxxxxxxxxxxxx (Baek Chang)
• Audiophile newbie reporting in
  • From: mike@xxxxxxxxxx (Michael Cronenworth)
• [PATCH] protocol-native: Allow clients to know at what index underrun occurred
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] protocol-native: Allow clients to know at what index underrun occurred
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] protocol-native: Allow clients to know at what index underrun occurred
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] alsa-plugins: Pulse: only underrun if no more data has been written
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] alsa-plugins: Pulse: only underrun if no more data has been written
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] protocol-native: Allow clients to know at what index underrun occurred
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Starting PulseAudio using SystemD
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Starting PulseAudio using SystemD
  • From: vallabha.pa@xxxxxxxxxxxxxx (Vallabha Hampiholi)
• Need help to enable echo cancel in pulseaudio
  • From: abdulmoiz786@xxxxxxxxx (ABDUL MOIZ)
• Automatically switch profiles depeding on the number of input-channels
  • From: frederik.vogelsang@xxxxxxxxxxxxxx (Frederik Vogelsang)
• Starting PulseAudio using SystemD
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Need help to enable echo cancel in pulseaudio
  • From: abdulmoiz786@xxxxxxxxx (ABDUL MOIZ)
• Starting PulseAudio using SystemD
  • From: vallabha.pa@xxxxxxxxxxxxxx (Vallabha Hampiholi)
• Starting PulseAudio using SystemD
  • From: vallabha.pa@xxxxxxxxxxxxxx (Vallabha Hampiholi)
• Automatically switch profiles depeding on the number of input-channels
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Starting PulseAudio using SystemD
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Starting PulseAudio using SystemD
  • From: jan.steffens@xxxxxxxxx (Jan Steffens)
• [PATCH] alsa-mixer: Fix element_is_subset().
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Starting PulseAudio using SystemD
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Glitch-Free Mode
  • From: vallabha.pa@xxxxxxxxxxxxxx (Vallabha Hampiholi)
• Glitch-Free Mode
  • From: bossart.nospam@xxxxxxxxx (pl bossart)
• Need help to enable echo cancel in pulseaudio
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Glitch-Free Mode
  • From: vallabha.pa@xxxxxxxxxxxxxx (Vallabha Hampiholi)
• Starting PulseAudio using SystemD
  • From: vallabha.pa@xxxxxxxxxxxxxx (Vallabha Hampiholi)
• Automatically switch profiles depeding on the number of input-channels
  • From: frederik.vogelsang@xxxxxxxxxxxxxx (Frederik Vogelsang)
• [PATCH] alsa-mixer: Fix element_is_subset().
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Need help to enable echo cancel in pulseaudio
  • From: abdulmoiz786@xxxxxxxxx (ABDUL MOIZ)
• What does pulseaudio use all the cpu-cycles for?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• How to specify default soundcard?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• What does pulseaudio use all the cpu-cycles for?
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• What does pulseaudio use all the cpu-cycles for?
  • From: linuxhippy@xxxxxxxxx (Clemens Eisserer)
• How to specify default soundcard?
  • From: linuxhippy@xxxxxxxxx (Clemens Eisserer)
• PulseSink Properties
  • From: vallabha.pa@xxxxxxxxxxxxxx (Vallabha Hampiholi)
• PulseSink Properties
  • From: vallabha.pa@xxxxxxxxxxxxxx (Vallabha Hampiholi)
• PulseAudio crash
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] build-sys: Check for necessary programs in bootstrap.sh
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• PulseSink Properties
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• PulseSink Properties
  • From: bossart.nospam@xxxxxxxxx (pl bossart)
• How is a message handled by a filter sink and its master sink?
  • From: bossart.nospam@xxxxxxxxx (pl bossart)
• [PATCH] build-sys: Check for necessary programs in bootstrap.sh
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] build-sys: Check for necessary programs in bootstrap.sh
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• How to debug a deadlock on audio routing?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• PulseAudio crash
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Need help to enable echo cancel in pulseaudio
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• How to debug a deadlock on audio routing?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• unable to play very small beep (.wav) sounds
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• How to avoid module-echo-cancel's "Echo-Cancel Source Stream" being created on a monitor source of an ALSA sink? If module-echo-cancel is loaded before the ALSA source is created.
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• Need help to enable echo cancel in pulseaudio
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• unable to play very small beep (.wav) sounds
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• How to avoid module-echo-cancel's "Echo-Cancel Source Stream" being created on a monitor source of an ALSA sink? If module-echo-cancel is loaded before the ALSA source is created.
  • From: abdulmoiz786@xxxxxxxxx (ABDUL MOIZ)
• How to avoid module-echo-cancel's "Echo-Cancel Source Stream" being created on a monitor source of an ALSA sink? If module-echo-cancel is loaded before the ALSA source is created.
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• How is a message handled by a filter sink and its master sink?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• How to debug a deadlock on audio routing?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• Need help to enable echo cancel in pulseaudio
  • From: abdulmoiz786@xxxxxxxxx (ABDUL MOIZ)
• PulseSink Properties
  • From: vallabha.pa@xxxxxxxxxxxxxx (Vallabha Hampiholi)
• [PATCH] build-sys: Check for necessary programs in bootstrap.sh
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Need help to enable echo cancel in pulseaudio
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• Need help to enable echo cancel in pulseaudio
  • From: abdulmoiz786@xxxxxxxxx (ABDUL MOIZ)
• Need help to enable echo cancel in pulseaudio
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• pulseaudio for omap4
  • From: ashwani.kumar@xxxxxxxxxxxxxxx (ashwanik)
• Need help to enable echo cancel in pulseaudio
  • From: abdulmoiz786@xxxxxxxxx (ABDUL MOIZ)
• PulseSink Properties
  • From: vallabha.pa@xxxxxxxxxxxxxx (Vallabha Hampiholi)
• PulseAudio crash
  • From: vallabha.pa@xxxxxxxxxxxxxx (Vallabha Hampiholi)
• avoid increase watermark for low latency capture
  • From: bossart.nospam@xxxxxxxxx (pl bossart)
• Need help to enable echo cancel in pulseaudio
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Need help to enable echo cancel in pulseaudio
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• unable to play very small beep (.wav) sounds
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• unable to play very small beep (.wav) sounds
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• Need help to enable echo cancel in pulseaudio
  • From: abdulmoiz786@xxxxxxxxx (ABDUL MOIZ)
• Need help to enable echo cancel in pulseaudio
  • From: abdulmoiz786@xxxxxxxxx (ABDUL MOIZ)
• Need help to enable echo cancel in pulseaudio
  • From: abdulmoiz786@xxxxxxxxx (ABDUL MOIZ)
• Need help to enable echo cancel in pulseaudio
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Need help to enable echo cancel in pulseaudio
  • From: abdulmoiz786@xxxxxxxxx (ABDUL MOIZ)
• Need help to enable echo cancel in pulseaudio
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Need help to enable echo cancel in pulseaudio
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• Need help to enable echo cancel in pulseaudio
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Need help to enable echo cancel in pulseaudio
  • From: abdulmoiz786@xxxxxxxxx (ABDUL MOIZ)
• [PulseAudio-Discuss] PulseAudio System Timer Requirements
  • From: vallabha.pa@xxxxxxxxxxxxxx (Vallabha Hampiholi)
• [PulseAudio-Discuss] PulseAudio System Timer Requirements
  • From: vallabha.pa@xxxxxxxxxxxxxx (Vallabha Hampiholi)
• avoid increase watermark for low latency capture
  • From: cguthrie@xxxxxxxxxxxx (Colin Guthrie)
• avoid increase watermark for low latency capture
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• Need help to enable echo cancel in pulseaudio
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• PulseSink Properties
  • From: vallabha.pa@xxxxxxxxxxxxxx (Vallabha Hampiholi)
• avoid increase watermark for low latency capture
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• PulseSink Properties
  • From: vallabha.pa@xxxxxxxxxxxxxx (Vallabha Hampiholi)
• avoid increase watermark for low latency capture
  • From: bossart.nospam@xxxxxxxxx (pl bossart)
• PulseSink Properties
  • From: bossart.nospam@xxxxxxxxx (pl bossart)
• [PATCH] alsa-mixer: Fix element_is_subset().
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Pulseaudio runs as mpd user after login
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Pulseaudio runs as mpd user after login
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Need help to enable echo cancel in pulseaudio
  • From: abdulmoiz786@xxxxxxxxx (ABDUL MOIZ)
• Pulseaudio runs as mpd user after login
  • From: Maystar@xxxxxx (Maystar@xxxxxx)
• Pulseaudio runs as mpd user after login
  • From: Maystar@xxxxxx (Maystar@xxxxxx)
• Pulseaudio runs as mpd user after login
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Pulseaudio runs as mpd user after login
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Pulseaudio runs as mpd user after login
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• PulseSink Properties
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Pulseaudio runs as mpd user after login
  • From: Maystar@xxxxxx (Maystar@xxxxxx)
• PulseSink Properties
  • From: vallabha.pa@xxxxxxxxxxxxxx (Vallabha Hampiholi)
• avoid increase watermark for low latency capture
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• pulseaudio 0.9.22
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• libpulse deadlock
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• pulseaudio 0.9.22
  • From: agnel.joel@xxxxxxxxx (Joel A Fernandes)
• libasound_module_*_pulse
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• New Wiki page:, http://pulseaudio.org/wiki/WritingProfiles
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Headset-detection
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• analog-stereo.echo-cancel idle for too long, suspending ...
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Headset-detection
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Choppy Sound with Pulsesink on ARM
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Need help to enable echo cancel in pulseaudio
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PulseAudio] No sound while Testing Pulseaudio on Beagleboard
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] virtual: Fix volume callback setting.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Pulseaudio 0.9.22 failure
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• analog-stereo.echo-cancel idle for too long, suspending ...
  • From: ashwani.kumar@xxxxxxxxxxxxxxx (ashwanik)
• New Wiki page:, http://pulseaudio.org/wiki/WritingProfiles
  • From: alex.wolfson@xxxxxxxxxxxxx (Alex Wolfson)
• Getting error in running paplay binary
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Headset-detection
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• Choppy Sound with Pulsesink on ARM
  • From: vallabha.pa@xxxxxxxxxxxxxx (Vallabha Hampiholi)
• Need help to enable echo cancel in pulseaudio
  • From: abdulmoiz786@xxxxxxxxx (ABDUL MOIZ)
• Choppy Sound with Pulsesink on ARM
  • From: vallabha.pa@xxxxxxxxxxxxxx (Vallabha Hampiholi)
• [PulseAudio] No sound while Testing Pulseaudio on Beagleboard
  • From: vsailub4u@xxxxxxxxx (v sailaja)
• Getting error in running paplay binary
  • From: cahoshing@xxxxxxxxx (chinmaya hoshing)
• [PATCH] virtual: Fix volume callback setting.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Pulseaudio 0.9.22 failure
  • From: agnel.joel@xxxxxxxxx (Joel A Fernandes)
• [v2] Various tidy ups to alsa mixer.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 05/11] alsa-mixer: Detect and then drop pointless paths in the path set.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 03/11] alsa: Reinitialise the mixer on port change.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 03/11] alsa: Reinitialise the mixer on port change.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 05/11] alsa-mixer: Detect and then drop pointless paths in the path set.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Getting error while running paplay binary
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Headset-detection
  • From: spideybr@xxxxxxxxx (Spidey / Claudio)
• Getting error while running paplay binary
  • From: cahoshing@xxxxxxxxx (chinmaya hoshing)
• Issue with access
  • From: ffrigerio@xxxxxxxxxxx (Fred Frigerio)
• New Wiki page: http://pulseaudio.org/wiki/WritingProfiles
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• New Wiki page: http://pulseaudio.org/wiki/WritingProfiles
  • From: alex.wolfson@xxxxxxxxxxxxx (Alex Wolfson)
• [PATCH 05/11] alsa-mixer: Detect and then drop pointless paths in the path set.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Issue with access
  • From: ffrigerio@xxxxxxxxxxx (Fred Frigerio)
• Issue with access
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 01/11] devices: Use wrapper functions to set the *_volume and *_mute callbacks.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Issue with access
  • From: ffrigerio@xxxxxxxxxxx (Fred Frigerio)
• Headset-detection
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Issue with access
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Headset-detection
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• libasound_module_*_pulse
  • From: vallabha.pa@xxxxxxxxxxxxxx (Vallabha Hampiholi)
• Issue with access
  • From: ffrigerio@xxxxxxxxxxx (Fred Frigerio)
• libpulse deadlock
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• Issue with access
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• PulseAudio native protocol
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Issue with access
  • From: ffrigerio@xxxxxxxxxxx (Fred Frigerio)
• Headset-detection
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 11/11] Questions for Tanu
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 10/11] reserve: Fix compile warning when compiling without dbus
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 09/11] alsa-mixer: Attempt to fix hardware volumes on init and after port switch.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 08/11] devices: Send a SYNC volumes message on port change to ensure volumes are propigated to the underlying device.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 07/11] alsa-mixer: Remove workaround for USB head/handsets
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 06/11] alsa: No need to go via sink/source to get the core.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 05/11] alsa-mixer: Detect and then drop pointless paths in the path set.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 04/11] alsa-mixer: Do not 'unify' mixer paths.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 03/11] alsa: Reinitialise the mixer on port change.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 02/11] devices: Set certain sink/source flags automatically.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 01/11] devices: Use wrapper functions to set the *_volume and *_mute callbacks.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [v2] Various tidy ups to alsa mixer.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 4/8] alsa-mixer: Detect and then drop pointless paths in the path set.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Headset-detection
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• PulseAudio native protocol
  • From: emo@xxxxxxx (Emil Ohlsson)
• Issue with access
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Issue with access
  • From: spideybr@xxxxxxxxx (Spidey / Claudio)
• Issue with access
  • From: ffrigerio@xxxxxxxxxxx (Fred Frigerio)
• [PATCH 2/8] alsa: Reinitialise the mixer on port change.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 1/8] devices: Set certain sink/source flags automatically.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Writing an output module
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Writing an output module
  • From: damien.dejean@xxxxxxxxxxxxxxx (Damien DEJEAN)
• Writing an output module
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Does pulseaudio resample when source and sink sample rate / bits are identical?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Writing an output module
  • From: damien.dejean@xxxxxxxxxxxxxxx (Damien DEJEAN)
• Does pulseaudio resample when source and sink sample rate / bits are identical?
  • From: redstone@xxxxxxxxx (Joshua Redstone)
• Headset-detection
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• pulseaudio mixer
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Does pulseaudio resample when source and sink sample rate / bits are identical?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Does pulseaudio resample when source and sink sample rate / bits are identical?
  • From: redstone@xxxxxxxxx (Joshua Redstone)
• Does pulseaudio resample when source and sink sample rate / bits are identical?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Does pulseaudio resample when source and sink sample rate / bits are identical?
  • From: redstone@xxxxxxxxx (Joshua Redstone)
• How to undefine "DBUS_TYPE_UNIX_FD" for bluetooth-util.c? Bluetooth module gave "Error from RegisterEndpoint reply: org.freedesktop.DBus.Error.UnknownMethod"
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• default port 4713
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• pulseaudio mixer
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• How to undefine "DBUS_TYPE_UNIX_FD" for bluetooth-util.c? Bluetooth module gave "Error from RegisterEndpoint reply: org.freedesktop.DBus.Error.UnknownMethod"
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• Headset-detection
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• Command Line Interface for pavucontrol
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Command Line Interface for pavucontrol
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] reset revents if meet underrun case
  • From: xingchao.wang@xxxxxxxxx (xingchao)
• [PATCH 2/8] alsa: Reinitialise the mixer on port change.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/8] devices: Set certain sink/source flags automatically.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 4/8] alsa-mixer: Detect and then drop pointless paths in the path set.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• default port 4713
  • From: jan.steffens@xxxxxxxxx (Jan Steffens)
• [PATCH 3/8] alsa-mixer: Do not 'unify' mixer paths.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 1/8] devices: Set certain sink/source flags automatically.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 2/8] alsa: Reinitialise the mixer on port change.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 3/8] alsa-mixer: Do not 'unify' mixer paths.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/8] alsa: Reinitialise the mixer on port change.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Jitter when using compositing (a.k.a. screen effects) in KDE 4
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Audio BoF at Desktop Summit
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• [PATCH 1/8] devices: Set certain sink/source flags automatically.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/8] devices: Set certain sink/source flags automatically.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [LAU] pulseaudio in realtime mode
  • From: dominic.sacre@xxxxxx (Dominic Sacré)
• Jitter when using compositing (a.k.a. screen effects) in KDE 4
  • From: frodeseverin@xxxxxxxxx (Frode Severin Hatlevik)
• Audio BoF at Desktop Summit
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• 2 minor issues noticed with padsp
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• 2 minor issues noticed with padsp
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Reading sound samples from different applications
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Reading sound samples from different applications
  • From: varun.kvv@xxxxxxxxx (Varun Vijayaraghavan)
• [PATCH 1/8] devices: Set certain sink/source flags automatically.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCHv3 3/4] alsa: Add UCM API for managing UCM propoerties
  • From: broonie@xxxxxxxxxxxxx (Mark Brown)
• Pulseaudio per-user instance unusable
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• Pulseaudio per-user instance unusable
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Pulseaudio per-user instance unusable
  • From: agnel.joel@xxxxxxxxx (Joel A Fernandes)
• Pulseaudio per-user instance unusable
  • From: agnel.joel@xxxxxxxxx (Joel A Fernandes)
• [PATCHv3 4/4] alsa: Support UCM profiles in module-alsa-card
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCHv3 3/4] alsa: Add UCM API for managing UCM propoerties
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCHv3 1/4] alsa: Export alsa-mixer API
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Pulseaudio per-user instance unusable
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Porting pulseaudio to Android
  • From: vikram.exe@xxxxxxxxx (Vikram Gupta)
• Pulseaudio per-user instance unusable
  • From: smcnam@xxxxxxxxx (Sean McNamara)
• Pulseaudio per-user instance unusable
  • From: agnel.joel@xxxxxxxxx (Joel A Fernandes)
• Pulseaudio per-user instance unusable
  • From: agnel.joel@xxxxxxxxx (Joel A Fernandes)
• [PATCH 1/8] devices: Set certain sink/source flags automatically.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• LADSPA parameters
  • From: nik.lutz@xxxxxxxxx (Nik Lutz)
• default port 4713
  • From: brian.chapman@xxxxxxxxxxx (Brian Chapman)
• LADSPA parameters
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 4/4] Profiles can have sink and source ports, and announce that through the API.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 3/4] Turn device-ports into reference counted objects
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 2/4] Create a port even if there is only one path/setting combination
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 1/4] Introduce "available" concept for ports, and communicate that to clients.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [RFC 0/4] Profiles can have ports
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 8/8] alsa-mixer: Attempt to fix hardware volumes on init and after port switch.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 7/8] devices: Send a SYNC volumes message on port change to ensure volumes are propigated to the underlying device.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 6/8] alsa-mixer: Remove workaround for USB head/handsets
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 5/8] alsa: No need to go via sink/source to get the core.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 4/8] alsa-mixer: Detect and then drop pointless paths in the path set.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 3/8] alsa-mixer: Do not 'unify' mixer paths.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 2/8] alsa: Reinitialise the mixer on port change.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 1/8] devices: Set certain sink/source flags automatically.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• Various tidyups to alsa mixer
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• Porting pulseaudio to Android
  • From: spideybr@xxxxxxxxx (Spidey / Claudio)
• LADSPA parameters
  • From: nik.lutz@xxxxxxxxx (Nik Lutz)
• Headset-detection
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Headset-detection
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• Porting pulseaudio to Android
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Porting pulseaudio to Android
  • From: vikram.exe@xxxxxxxxx (Vikram Gupta)
• Headset-detection
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Porting pulseaudio to Android
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Headset-detection
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• Porting pulseaudio to Android
  • From: vikram.exe@xxxxxxxxx (Vikram Gupta)
• [RFC] Introduce "available" concept for ports, and communicate that to clients.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCHv3 0/4] Read and store UCM data as proplist
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Jack detection - from the other side
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Jack detection - from the other side
  • From: broonie@xxxxxxxxxxxxx (Mark Brown)
• [PATCHv3 0/4] Read and store UCM data as proplist
  • From: broonie@xxxxxxxxxxxxx (Mark Brown)
• Jack detection - from the other side
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/4] alsa: Reinitialise the mixer on port change.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• understanding PA cork/uncorking scenarios
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• Ports and profiles
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• PulseAudio native protocol
  • From: bart.cerneels@xxxxxxxxxxxxxxx (Bart Cerneels)
• Mute mic output keeping its input working
  • From: marcosfrm@xxxxxxxxx (Marcos Felipe Rasia de Mello)
• Jack detection - from the other side
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Mute mic output keeping its input working
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Mute mic output keeping its input working
  • From: marcosfrm@xxxxxxxxx (Marcos Felipe Rasia de Mello)
• [PATCH 4/4] alsa-mixer: Attempt to detect and then drop redundant paths in the path set.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 4/4] alsa-mixer: Attempt to detect and then drop redundant paths in the path set.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [RFC] Should we set Front=0dB for the headphone path?
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] alsa-mixer: Set "Front" control to 0 dB on headphone path
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Mute mic output keeping its input working
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 4/4] alsa-mixer: Attempt to detect and then drop redundant paths in the path set.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Mute mic output keeping its input working
  • From: marcosfrm@xxxxxxxxx (Marcos Mello)
• [RFC] Should we set Front=0dB for the headphone path?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] module-waveout: Correctly handle mono volume controls on waveout device
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 4/4] alsa-mixer: Attempt to detect and then drop redundant paths in the path set.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 4/4] alsa-mixer: Attempt to detect and then drop redundant paths in the path set.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [RFC] Fix up alsa mixer handling for varying port capabilities
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 4/4] alsa-mixer: Attempt to detect and then drop redundant paths in the path set.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 3/4] alsa-mixer: Do not 'unify' mixer paths.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 2/4] alsa: Reinitialise the mixer on port change.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH 1/4] devices: Deprecate the HW_VOLUME/MUTE_CTRL and DECIBEL_VOLUME device flags.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [RFC] Fix up alsa mixer handling for varying port capabilities
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH] module-waveout: Correctly handle mono volume controls on waveout device
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [RFC] Should we set Front=0dB for the headphone path?
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• PulseAudio native protocol
  • From: emo@xxxxxxx (Emil Ohlsson)
• PulseAudio native protocol
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• PulseAudio native protocol
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• PulseAudio native protocol
  • From: emo@xxxxxxx (Emil Ohlsson)
• understanding PA cork/uncorking scenarios
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• understanding PA cork/uncorking scenarios
  • From: killerkiwi2005@xxxxxxxxx (Jason Taylor)
• trigger and drain after underrun occurs
  • From: baeksan@xxxxxxxxxxxxxxxxxx (Baek Chang)
• understanding PA cork/uncorking scenarios
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• understanding PA cork/uncorking scenarios
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• PulseAudio native protocol
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• PulseAudio native protocol
  • From: emo@xxxxxxx (Emil Ohlsson)
• [ANNOUNCE] Final development branches merged before v1.0
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [ANNOUNCE] Final development branches merged before v1.0
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Some more build system patches
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Some more build system patches
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• PA re-sampling and mute/unmute query
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• No subject
  • From: bogus@xxxxxxxxxxxxxxxxxx ()
• PA re-sampling and mute/unmute query
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• PA re-sampling and mute/unmute query
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• No subject
  • From: bogus@xxxxxxxxxxxxxxxxxx ()
• Remove obsolete description property from modules
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• PA re-sampling and mute/unmute query
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Why audio latency in loopback is divided by 3?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCHv3 0/4] Read and store UCM data as proplist
  • From: gg@xxxxxxxxxxxxxxx (Graeme Gregory)
• [PATCH 5/5] build-sys: Fix handling of Bluez, Hal dependency on D-Bus
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 4/5] build-sys: Add more build-time conditionals to config files
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 3/5] build-sys: Process configuration files with m4
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 2/5] build-sys: Use configure AC_OUTPUT to process config files
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 1/5] build-sys: Move some more defines to configure.ac
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Some more build system patches
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 4/4] alsa-mixer: Add force-hw-volume flag to alsa profile sets
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 4/4] alsa-mixer: Add force-hw-volume flag to alsa profile sets
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Command Line Interface for pavucontrol
  • From: vallabha.pa@xxxxxxxxxxxxxx (Vallabha Hampiholi)
• [PATCHv3 0/4] Read and store UCM data as proplist
  • From: x0092071@xxxxxx (Alejandro Gonzalez)