Pulseaudio Discussion - Date Index

• Thread Index

• [PATCHv3 0/4] Read and store UCM data as proplist
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCHv3 0/4] Read and store UCM data as proplist
  • From: x0092071@xxxxxx (Alejandro Gonzalez)
• [PATCH 4/4] alsa-mixer: Add force-hw-volume flag to alsa profile sets
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PACKAGERS] Speex dep bump
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 4/4] alsa-mixer: Add force-hw-volume flag to alsa profile sets
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [ANNOUNCE] Gentoo live ebuild
  • From: jan@xxxxxxxxxxxx (Jan Willies)
• [PATCH] parecord: Automatically detect file format from extension
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] configure.ac: look for function `backtrace` also in library `ubacktrace`
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] parecord: Automatically detect file format from extension
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] configure.ac: look for function `backtrace` also in library `ubacktrace`
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• [PATCH 1/3] build-sys: Use ax_check_flag macros from autoconf archive
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] alsa-mixer: Add workaround for some USB headsets
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 3/3] build-sys: Move some more defines from CFLAGS to config.h
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 2/3] build-sys: Use AX_DEFINE_DIR macro instead of setting AM_CFLAGS
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 1/3] build-sys: Use ax_check_flag macros from autoconf archive
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [ANNOUNCE] PulseAudio 0.9.23
  • From: zonque@xxxxxxxxx (Daniel Mack)
• RFC: realtime prio for null and tunnel sinks? (Was Re: Why only selected modules try to acquire realtime priority?)
  • From: marcin@xxxxxxxxxx (marcin@xxxxxxxxxx)
• [ANNOUNCE] Gentoo live ebuild
  • From: spideybr@xxxxxxxxx (Spidey / Claudio)
• [ANNOUNCE] Gentoo live ebuild
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] Add windbg log target + Fix configure not honoring --without-nls
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] Add windbg log target + Fix configure not honoring --without-nls
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] Remove libpulse-browse and pabrowse
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Add windbg log target + Fix configure not honoring --without-nls
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [RFC] Remove or disabled libpulsebrowse?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [ANNOUNCE] Daily builds of Pulseaudio git master available for Ubuntu 11.04 and 11.10
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [ANNOUNCE] PulseAudio 0.9.23
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [RFC] Remove or disabled libpulsebrowse?
  • From: themuso@xxxxxxxxxx (Luke Yelavich)
• [PATCH] Add windbg log target + Fix configure not honoring --without-nls
  • From: fritz@xxxxxxxxxxxxxxx (Fritz Elfert)
• [PATCH] build-sys: Update orc.m4 to latest upstream version
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] Remove libpulse-browse and pabrowse
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] Update todo
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] win32: Make some unused-variable warnings go away
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] win32: Make once-test work
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] build-sys: Cleanup Makefile.am
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] Add sys/time.h include to rtclock.c
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [RFC] Remove or disabled libpulsebrowse?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [RFC] Remove or disabled libpulsebrowse?
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [RFC] Remove or disabled libpulsebrowse?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Remove obsolete description property from modules
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Remove obsolete description property from modules
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Suggested improvements for the raop module
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Remove unnecessary #includes
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [ANNOUNCE] Final development branches merged before v1.0
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• ALC892 on Clevo P150HM and too many (?) options in pavucontrol
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [ANNOUNCE] Bugs/Tickets now on FDO
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• RFC: realtime prio for null and tunnel sinks? (Was Re: Why only selected modules try to acquire realtime priority?)
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Tags and versions
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• RFC: realtime prio for null and tunnel sinks? (Was Re: Why only selected modules try to acquire realtime priority?)
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• RFC: realtime prio for null and tunnel sinks? (Was Re: Why only selected modules try to acquire realtime priority?)
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• ALC892 on Clevo P150HM and too many (?) options in pavucontrol
  • From: belegdol@xxxxxxxxx (Julian Sikorski)
• [PATCH] Remove unnecessary #includes
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] Remove unnecessary #includes
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Remove obsolete description property from modules
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Remove unnecessary #includes
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Remove obsolete description property from modules
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• RFC: realtime prio for null and tunnel sinks? (Was Re: Why only selected modules try to acquire realtime priority?)
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Suggested improvements for the raop module
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] bluetooth-discover: Remove remaining ifdef NOKIAs.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• RFC: realtime prio for null and tunnel sinks? (Was Re: Why only selected modules try to acquire realtime priority?)
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 03/10] build-sys: Reset CFLAGS after DBUS check
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• ALC892 on Clevo P150HM and too many (?) options in pavucontrol
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] SSE/MMX: Fix problem with highpitched noise on i386
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 03/10] build-sys: Reset CFLAGS after DBUS check
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• PA re-sampling and mute/unmute query
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• Detecting hotplug routing changes
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] avoid fake rewind in corked state
  • From: xingchao.wang@xxxxxxxxx (xingchao)
• [PATCH 10/10] build-sys: Use AX_PTHREAD macro from autoconf archive
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 09/10] build-sys: Use AX_CHECK_DEFINE macro from autoconf archive
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 08/10] build-sys: Use AX_TLS macro from autoconf archive
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 07/10] build-sys: Move acx_lirc.m4 contents to configure.ac
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 06/10] build-sys: Move some stuff around in configure.ac
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 05/10] build-sys: Clean up configure.ac
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 04/10] build-sys: Define PA_CFLAGS at right time
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 03/10] build-sys: Reset CFLAGS after DBUS check
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 02/10] build-sys: Consolidate host_os handling
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 01/10] build-sys: Remove unnecessary AC_SUBST calls
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Patches for configure.ac
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Detecting hotplug routing changes
  • From: harryhaaren@xxxxxxxxx (Harry Van Haaren)
• [RFC] Changing the way our saved database files are stored from blob to tagstruct.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] SSE/MMX: Fix problem with highpitched noise on i386
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] SSE/MMX: Fix problem with highpitched noise on i386
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [patch] avoid fake rewind when setting cork state
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• [RFC] Changing the way our saved database files are stored from blob to tagstruct.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Realtek ALC892 being overdriven to 153 % volume
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 0/2] Fix mingw32 compile problems
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Realtek ALC892 being overdriven to 153 % volume
  • From: belegdol@xxxxxxxxx (Julian Sikorski)
• ALC892 on Clevo P150HM and too many (?) options in pavucontrol
  • From: belegdol@xxxxxxxxx (Julian Sikorski)
• [PATCH 0/2] Fix mingw32 compile problems
  • From: fritz@xxxxxxxxxxxxxxx (Fritz Elfert)
• Async API - need some help
  • From: zeno.endemann@xxxxxxxxxxxxxx (Zeno Endemann)
• Missing analog profiles
  • From: spideybr@xxxxxxxxx (Spidey / Claudio)
• Device name of audio headset in pulseaudio?
  • From: colbec@xxxxxxxx (Colin Beckingham)
• Why only selected modules try to acquire realtime priority?
  • From: marcin@xxxxxxxxxx (marcin@xxxxxxxxxx)
• Why audio latency in loopback is divided by 3?
  • From: marcin@xxxxxxxxxx (marcin@xxxxxxxxxx)
• Why only selected modules try to acquire realtime priority?
  • From: marcin@xxxxxxxxxx (marcin@xxxxxxxxxx)
• Device name of audio headset in pulseaudio?
  • From: aab@xxxxxxxxxxx (Andrew Burgess)
• Device name of audio headset in pulseaudio?
  • From: aab@xxxxxxxxxxx (Andrew Burgess)
• Device name of audio headset in pulseaudio?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Device name of audio headset in pulseaudio?
  • From: colbec@xxxxxxxx (Colin Beckingham)
• Why only selected modules try to acquire realtime priority?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Async API - need some help
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Missing analog profiles
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Why only selected modules try to acquire realtime priority?
  • From: marcin@xxxxxxxxxx (marcin@xxxxxxxxxx)
• Async API - need some help
  • From: zeno.endemann@xxxxxxxxxxxxxx (Zeno Endemann)
• Missing analog profiles
  • From: spideybr@xxxxxxxxx (Spidey / Claudio)
• Realtek ALC892 being overdriven to 153 % volume
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Realtek ALC892 being overdriven to 153 % volume
  • From: seven.steps@xxxxxxxxx (Daniel Chen)
• Realtek ALC892 being overdriven to 153 % volume
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Realtek ALC892 being overdriven to 153 % volume
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Realtek ALC892 being overdriven to 153 % volume
  • From: conor.curran@xxxxxxxxxxxxx (Conor Curran)
• Realtek ALC892 being overdriven to 153 % volume
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• ALC892 on Clevo P150HM and too many (?) options in pavucontrol
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Realtek ALC892 being overdriven to 153 % volume
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Realtek ALC892 being overdriven to 153 % volume
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Missing analog profiles
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• ARMv7 (MMX/SSE neon)
  • From: agn@xxxxxxxxxxxxxx (Anders Gnistrup)
• ARMv7 (MMX/SSE neon)
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• ARMv7 (MMX/SSE neon)
  • From: agn@xxxxxxxxxxxxxx (Anders Gnistrup)
• how's fighting rewind going?
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• how's fighting rewind going?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• Missing analog profiles
  • From: spideybr@xxxxxxxxx (Spidey / Claudio)
• Realtek ALC892 being overdriven to 153 % volume
  • From: jeremy@xxxxxxxxxxx (Jeremy Nickurak)
• Realtek ALC892 being overdriven to 153 % volume
  • From: belegdol@xxxxxxxxx (Julian Sikorski)
• ALC892 on Clevo P150HM and too many (?) options in pavucontrol
  • From: belegdol@xxxxxxxxx (Julian Sikorski)
• Realtek ALC892 being overdriven to 153 % volume
  • From: belegdol@xxxxxxxxx (Julian Sikorski)
• Missing analog profiles
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• ALC892 on Clevo P150HM and too many (?) options in pavucontrol
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Realtek ALC892 being overdriven to 153 % volume
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Clevo P150HM, Realtek ALC892 and subwoofer
  • From: belegdol@xxxxxxxxx (Julian Sikorski)
• Bluetooth HSP sink is more likely to cause buffer underrun when moving a live stream to it from ALSA, how to ask application to write more data?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• Async API - need some help
  • From: zeno.endemann@xxxxxxxxxxxxxx (Zeno Endemann)
• Async API - need some help
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Async API - need some help
  • From: zeno.endemann@xxxxxxxxxxxxxx (Zeno Endemann)
• Clevo P150HM, Realtek ALC892 and subwoofer
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Realtek ALC892 being overdriven to 153 % volume
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Async API - need some help
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• ALC892 on Clevo P150HM and too many (?) options in pavucontrol
  • From: belegdol@xxxxxxxxx (Julian Sikorski)
• Async API - need some help
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Realtek ALC892 being overdriven to 153 % volume
  • From: belegdol@xxxxxxxxx (Julian Sikorski)
• Clevo P150HM, Realtek ALC892 and subwoofer
  • From: belegdol@xxxxxxxxx (Julian Sikorski)
• Async API - need some help
  • From: zeno.endemann@xxxxxxxxxxxxxx (Zeno Endemann)
• [PATCH 0/2] Fix mingw32 compile problems
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 0/2] Fix mingw32 compile problems
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 2/2] - Do not use sched_get_priority... on mingw with win32 pthreads installed
  • From: fritz@xxxxxxxxxxxxxxx (Fritz Elfert)
• [PATCH 1/2] - Disable check for pthreads on win32
  • From: fritz@xxxxxxxxxxxxxxx (Fritz Elfert)
• [PATCH 0/2] Fix mingw32 compile problems
  • From: fritz@xxxxxxxxxxxxxxx (Fritz Elfert)
• [RFC] Changing the way our saved database files are stored from blob to tagstruct.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [RFC] Source Output Volumes
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• how's fighting rewind going?
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• how's fighting rewind going?
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Bluetooth HSP sink is more likely to cause buffer underrun when moving a live stream to it from ALSA, how to ask application to write more data?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• Missing analog profiles
  • From: spideybr@xxxxxxxxx (Spidey / Claudio)
• how's fighting rewind going?
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• [RFC] Source Output Volumes
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [RFC] Changing the way our saved database files are stored from blob to tagstruct.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• How to use "sco_sink" and "sco_source" in the bluetooth device module?
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• Bluetooth HSP sink is more likely to cause buffer underrun when moving a live stream to it from ALSA, how to ask application to write more data?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• understanding PA cork/uncorking scenarios
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• RFC: Disable module-x11-cork-request by default?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Stream move + latency problems
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• GStreamer pulsesrc issue (with patch suggestion)
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• how's fighting rewind going?
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• how's fighting rewind going?
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• how's fighting rewind going?
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Bluetooth HSP sink is more likely to cause buffer underrun when moving a live stream to it from ALSA, how to ask application to write more data?
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• Bluetooth HSP sink is more likely to cause buffer underrun when moving a live stream to it from ALSA, how to ask application to write more data?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• how's fighting rewind going?
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• how's fighting rewind going?
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• source-output-volume question
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• source-output-volume question
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• source-output-volume question
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• understanding PA cork/uncorking scenarios
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• understanding PA cork/uncorking scenarios
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• understanding PA cork/uncorking scenarios
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• understanding PA cork/uncorking scenarios
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• How to use "sco_sink" and "sco_source" in the bluetooth device module?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• understanding PA cork/uncorking scenarios
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• GStreamer pulsesrc issue (with patch suggestion)
  • From: erik.boto@xxxxxxxxxxxxxx (Erik Botö)
• Stream move + latency problems
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• How to use "sco_sink" and "sco_source" in the bluetooth device module?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• Stream move + latency problems
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] protocol-native: Use original requested latency on stream moves
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• module-echo-cancel
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Simultaneous output to local and remote sound cards
  • From: yukyuri@xxxxxxxxx (Sergey M.)
• Simultaneous output to local and remote sound cards
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Simultaneous output to local and remote sound cards
  • From: yukyuri@xxxxxxxxx (Sergey M.)
• changing sinks on the fly
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• What's the purpose of "rewind" on corking and uncorking?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• What's the purpose of "rewind" on corking and uncorking?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• changing sinks on the fly
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• association of pa_stream to mixer input channel
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• association of pa_stream to mixer input channel
  • From: jayan_john@xxxxxxxxxxx (jayan john)
• [PACKAGERS] New dep
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• association of pa_stream to mixer input channel
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PACKAGERS] New dep
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• association of pa_stream to mixer input channel
  • From: jayan_john@xxxxxxxxxxx (jayan john)
• Problems starting without X11 (git master)
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Problems starting without X11 (git master)
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Problems starting without X11 (git master)
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Problems starting without X11 (git master)
  • From: gabrbedd@xxxxxxxxx (Gabriel M. Beddingfield)
• Problems starting without X11 (git master)
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] protocol-native: set a minimum audio latency for a "phone" input stream
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• How to use "sco_sink" and "sco_source" in the bluetooth device module?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 0/2] Support for forcing old protocol versions.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• What's the purpose of "rewind" on corking and uncorking?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 0/2] Support for forcing old protocol versions.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] protocol-native: set a minimum audio latency for a "phone" input stream
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• How to use "sco_sink" and "sco_source" in the bluetooth device module?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• What's the purpose of "rewind" on corking and uncorking?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• [PATCH] bluetooth-discover: Remove remaining ifdef NOKIAs.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Simultaneous output to local and remote sound cards
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Simultaneous output to local and remote sound cards
  • From: yukyuri@xxxxxxxxx (Sergey M.)
• [PATCH 0/2] Support for forcing old protocol versions.
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 0/2] Support for forcing old protocol versions.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 0/2] Support for forcing old protocol versions.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Simultaneous output to local and remote sound cards
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 2/2] native: New modarg: protocol-version-limit.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/2] libpulse: Support new environment variable: PULSE_PROTOCOL_VERSION_LIMIT.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 0/2] Support for forcing old protocol versions.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Simultaneous output to local and remote sound cards
  • From: yukyuri@xxxxxxxxx (Sergey M.)
• [PATCH] protocol-native: set a minimum audio latency for a "phone" input stream
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• How to use "sco_sink" and "sco_source" in the bluetooth device module?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• [PATCH] gitignore: Add connect-stress, extended-test and format-test.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] gitignore: Add connect-stress, extended-test and format-test.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] Define WIN32_LEAN_AND_MEAN before including windows.h
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] gitignore: Add connect-stress, extended-test and format-test.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• How to use "sco_sink" and "sco_source" in the bluetooth device module?
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• How to use "sco_sink" and "sco_source" in the bluetooth device module?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• [PATCH] gitignore: Add connect-stress, extended-test and format-test.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Suggested improvements for the raop module
  • From: bryangleeson@xxxxxxxxx (Bryan Gleeson)
• sink-input's membockq's read-index rewound to a huge negative causing silence delay, almost 2~3 seconds
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• dynamic routing through pulse audio
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• PulseAudio doesn't seem to find my HDMI audio card
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• PulseAudio doesn't seem to find my HDMI audio card
  • From: mnaugendre@xxxxxxxxx (Marie-Noëlle Augendre)
• PulseAudio doesn't seem to find my HDMI audio card
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• PulseAudio doesn't seem to find my HDMI audio card
  • From: mnaugendre@xxxxxxxxx (Marie-Noëlle Augendre)
• PulseAudio doesn't seem to find my HDMI audio card
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Suggested improvements for the raop module
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• No subject
  • From: bogus@xxxxxxxxxxxxxxxxxx ()
• No subject
  • From: bogus@xxxxxxxxxxxxxxxxxx ()
• No subject
  • From: bogus@xxxxxxxxxxxxxxxxxx ()
• No subject
  • From: bogus@xxxxxxxxxxxxxxxxxx ()
• How is "pa_sink_input_process_msg" called?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• How is "pa_sink_input_process_msg" called?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• Power management question
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• PulseAudio doesn't seem to find my HDMI audio card
  • From: mnaugendre@xxxxxxxxx (Marie-Noëlle Augendre)
• Suggested improvements for the raop module
  • From: bryangleeson@xxxxxxxxx (Bryan Gleeson)
• Microphone Confusion
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Microphone Confusion
  • From: floriparob@xxxxxxxxxxxx (Robert Stone)
• sink-input's membockq's read-index rewound to a huge negative causing silence delay, almost 2~3 seconds
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• How is "pa_sink_input_process_msg" called?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Power management question
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• How is "pa_sink_input_process_msg" called?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• dynamic routing through pulse audio
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• sink-input's membockq's read-index rewound to a huge negative causing silence delay, almost 2~3 seconds
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• sink-input's membockq's read-index rewound to a huge negative causing silence delay, almost 2~3 seconds
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• [PATCH 2/2] memblockq: Limit rewinding so that it never results in a negative read index.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• dynamic routing through pulse audio
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• [PATCH 1/2] sink-input: (DEBUG) Add render_memblockq read and write index printing.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Power management question
  • From: broonie@xxxxxxxxxxxxx (Mark Brown)
• Suggested improvements for the raop module
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• sink-input's membockq's read-index rewound to a huge negative causing silence delay, almost 2~3 seconds
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• dynamic routing through pulse audio
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• PulseAudio doesn't seem to find my HDMI audio card
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• How is "pa_sink_input_process_msg" called?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• PulseAudio doesn't seem to find my HDMI audio card
  • From: mnaugendre@xxxxxxxxx (Marie-Noëlle Augendre)
• dynamic routing through pulse audio
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• Suggested improvements for the raop module
  • From: bryangleeson@xxxxxxxxx (Bryan Gleeson)
• Power management question
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• dynamic routing through pulse audio
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• PulseAudio doesn't seem to find my HDMI audio card
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• dynamic routing through pulse audio
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• [PATCH] Define WIN32_LEAN_AND_MEAN before including windows.h
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• PulseAudio doesn't seem to find my HDMI audio card
  • From: mnaugendre@xxxxxxxxx (Marie-Noëlle Augendre)
• PulseAudio doesn't seem to find my HDMI audio card
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• PulseAudio doesn't seem to find my HDMI audio card
  • From: mnaugendre@xxxxxxxxx (Marie-Noëlle Augendre)
• PA_ERR_ACCESS problems.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Define WIN32_LEAN_AND_MEAN before including windows.h
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• PA_ERR_ACCESS problems.
  • From: agn@xxxxxxxxxxxxxx (Anders Gnistrup)
• Why does a VOIP sink input's current latency become "0" after moving to a new sink? I saw endless "rewind" in log
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• [PATCH] Define WIN32_LEAN_AND_MEAN before including windows.h
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] Define WIN32_LEAN_AND_MEAN before including windows.h
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• precise stream timing
  • From: mer34@xxxxxxxxxxx (Matt Robbins)
• NVidia HDMI output
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• NVidia HDMI output
  • From: swarren@xxxxxxxxxx (Stephen Warren)
• NVidia HDMI output
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• NVidia HDMI output
  • From: ljkarkk2@xxxxxxxxx (Lasse Kärkkäinen)
• pulse audio module callbacks
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• Low latency applications
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Low latency applications
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Low latency applications
  • From: ljkarkk2@xxxxxxxxx (Lasse Kärkkäinen)
• About PulseAudio DBUS service
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• PA_ERR_ACCESS problems.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• pulse audio module callbacks
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• About PulseAudio DBUS service
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Microphone Confusion
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• PA_ERR_ACCESS problems.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• No subject
  • From: bogus@xxxxxxxxxxxxxxxxxx ()
• PA_ERR_ACCESS problems.
  • From: agn@xxxxxxxxxxxxxx (Anders Gnistrup)
• Microphone Confusion
  • From: floriparob@xxxxxxxxxxxx (Robert Stone)
• Why does a VOIP sink input's current latency become "0" after moving to a new sink? I saw endless "rewind" in log
  • From: x0092071@xxxxxx (Alejandro Gonzalez)
• Underruns when changing sinks on a 'live stream'
  • From: x0092071@xxxxxx (Alejandro Gonzalez)
• About PulseAudio DBUS service
  • From: huan.zheng@xxxxxxxxx (Zheng, Huan)
• [RFC] Changing the way our saved database files are stored from blob to tagstruct.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] database: Convert our use of database files to save in tagstruct format.
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• Underruns when changing sinks on a 'live stream'
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• pulse audio module callbacks
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• PA_STREAM_ADJUST_LATENCY caused buffer underruns when change sinks on a stream
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• dynamic routing through pulse audio
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• dynamic routing through pulse audio
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• [RFC] Source Output Volumes
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Why does a VOIP sink input's current latency become "0" after moving to a new sink? I saw endless "rewind" in log
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• Underruns when changing sinks on a 'live stream'
  • From: x0092071@xxxxxx (Alejandro Gonzalez)
• Underruns when changing sinks on a 'live stream'
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [alsa-devel] [PATCH] thinkpad-acpi: Enable microphone mute LED
  • From: tiwai@xxxxxxx (Takashi Iwai)
• Why does a VOIP sink input's current latency become "0" after moving to a new sink? I saw endless "rewind" in log
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• dynamic routing through pulse audio
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Underruns when changing sinks on a 'live stream'
  • From: x0092071@xxxxxx (Alejandro Gonzalez)
• dynamic routing through pulse audio
  • From: brian@xxxxxxxxxxxxxxx (Brian J. Murrell)
• dynamic routing through pulse audio
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• precise stream timing
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• precise stream timing
  • From: mer34@xxxxxxxxxxx (Matt Robbins)
• Why does a VOIP sink input's current latency become "0" after moving to a new sink? I saw endless "rewind" in log
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• dynamic routing through pulse audio
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• dynamic routing through pulse audio
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• Why does a VOIP sink input's current latency become "0" after moving to a new sink? I saw endless "rewind" in log
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Why does a VOIP sink input's current latency become "0" after moving to a new sink? I saw endless "rewind" in log
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• Why does a VOIP sink input's current latency become "0" after moving to a new sink? I saw endless "rewind" in log
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• Selecting Airplay as PiulseAudio Sink
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• How to check audio sample data to a bluetooth sink?
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Audio degradation and Underruns when changing sinks on a 'live stream'
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Audio degradation and Underruns when changing sinks on a 'live stream'
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Selecting Airplay as PiulseAudio Sink
  • From: adityar7@xxxxxxxxx (Aditya Rajgarhia)
• Underruns when changing sinks on a 'live stream'
  • From: x0092071@xxxxxx (Alejandro Gonzalez)
• Audio degradation and Underruns when changing sinks on a 'live stream'
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• dynamic routing through pulse audio
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• dynamic routing through pulse audio
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• dynamic routing through pulse audio
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• dynamic routing through pulse audio
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• dynamic routing through pulse audio
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• Audio degradation and Underruns when changing sinks on a 'live stream'
  • From: x0092071@xxxxxx (Alejandro Gonzalez)
• May pulseadio still have some 'memory' after bluetooth headset changed profile and cause unnecessary resampling?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• Why is it still hissing?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• May pulseadio still have some 'memory' after bluetooth headset changed profile and cause unnecessary resampling?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• How to check audio sample data to a bluetooth sink?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] osx: pass -headerpad_max_install_names to the linker, too
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] fix the assumption that volume is always positive
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Re: Why is it still hissing?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• unsuscribe
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• unsuscribe
  • From: darinpowers@xxxxxxxxx (Darin Powers)
• unsuscribe
  • From: pyaggi@xxxxxxxxxxxxxxx (Pablo Yaggi)
• unsubscribe
  • From: darinpowers@xxxxxxxxx (Darin Powers)
• Selecting Airplay as PiulseAudio Sink
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Selecting Airplay as PiulseAudio Sink
  • From: adityar7@xxxxxxxxx (Aditya Rajgarhia)
• How to check audio sample data to a bluetooth sink?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• How to check audio sample data to a bluetooth sink?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• How to check audio sample data to a bluetooth sink?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• Writing an output module
  • From: damien.dejean@xxxxxxxxxxxxxxx (Damien DEJEAN)
• [PATCH] osx: pass -headerpad_max_install_names to the linker, too
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] osx: pass -headerpad_max_install_names to the linker, too
  • From: zonque@xxxxxxxxx (Daniel Mack)
• [ANNOUNCE] Mailing List Move
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [ANNOUNCE] Mailing List Move
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Writing an output module
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• How to check audio sample data to a bluetooth sink?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• When multiple sink inputs are connected to a same sink, how are the audio streams are mixed?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• When multiple sink inputs are connected to a same sink, how are the audio streams are mixed?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• How to check audio sample data to a bluetooth sink?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• [PATCH 1/2] alsa: add jack detection support
  • From: broonie@xxxxxxxxxxxxx (Mark Brown)
• [PATCH] thinkpad-acpi: Enable microphone mute LED
  • From: luto@xxxxxxx (Andrew Lutomirski)
• module-echo-cancel
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• module-echo-cancel
  • From: baeksan@xxxxxxxxxxxxxxxxxx (Baek Chang)
• [PATCH] osx: pass -headerpad_max_install_names to the linker, too
  • From: zonque@xxxxxxxxx (Daniel Mack)
• How to check audio sample data to a bluetooth sink?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• How to check audio sample data to a bluetooth sink?
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• How to check audio sample data to a bluetooth sink?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• [PACKAGERS] New dep
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• rewind and underrun issues on start of playback
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• [PATCH] Re: Why is it still hissing?
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] SSE/MMX: Fix problem with highpitched noise on i386
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] fix the assumption that volume is always positive
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• [PACKAGERS] New dep
  • From: themuso@xxxxxxxxxx (Luke Yelavich)
• [PACKAGERS] New dep
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PACKAGERS] New dep
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• module-echo-cancel
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• module-echo-cancel
  • From: baeksan@xxxxxxxxxxxxxxxxxx (Baek Chang)
• [PACKAGERS] New dep
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PACKAGERS] New dep
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] fix the assumption that volume is always positive
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] fix the assumption that volume is always positive
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• How to change profile of bluetooth headset for different applications?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• How to change profile of bluetooth headset for different applications?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] fix the assumption that volume is always positive
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/2] alsa: add jack detection support
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• rewind and underrun issues on start of playback
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• rewind and underrun issues on start of playback
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• rewind and underrun issues on start of playback
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• rewind and underrun issues on start of playback
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] fix the assumption that volume is always positive
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] fix the assumption that volume is always positive
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• ask about the assumption of min volume and max volume got from ALSA
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• ask about the assumption of min volume and max volume got from ALSA
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• rewind and underrun issues on start of playback
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• ask about the assumption of min volume and max volume got from ALSA
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• ask about the assumption of min volume and max volume got from ALSA
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• DLNA/Airplay Support
  • From: adityar7@xxxxxxxxx (Aditya Rajgarhia)
• DLNA/Airplay Support
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• How to debug a "protocol error" message?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• EDID-like data for audio: Port correlation between ALSA and X
  • From: swarren@xxxxxxxxxx (Stephen Warren)
• Glitches on null sink?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• How to debug a "protocol error" message?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/2] alsa: load jack detection module
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/2] alsa: add jack detection support
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• DLNA/Airplay Support
  • From: adityar7@xxxxxxxxx (Aditya Rajgarhia)
• Why is it still hissing?
  • From: luto@xxxxxxx (Andrew Lutomirski)
• ask about the assumption of min volume and max volume got from ALSA
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• Dealing with the ThinkPad hardware mixer
  • From: luto@xxxxxxx (Andrew Lutomirski)
• Dealing with the ThinkPad hardware mixer
  • From: teg@xxxxxxx (Tom Gundersen)
• Dealing with the ThinkPad hardware mixer
  • From: luto@xxxxxxx (Andrew Lutomirski)
• How to change profile of bluetooth headset for different applications?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• How to change profile of bluetooth headset for different applications?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• Why is it still hissing?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Dealing with the ThinkPad hardware mixer
  • From: teg@xxxxxxx (Tom Gundersen)
• Why is it still hissing?
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• How to debug a "protocol error" message?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• How to debug a "protocol error" message?
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Dealing with the ThinkPad hardware mixer
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Dealing with the ThinkPad hardware mixer
  • From: luto@xxxxxxx (Andrew Lutomirski)
• Dealing with the ThinkPad hardware mixer
  • From: teg@xxxxxxx (Tom Gundersen)
• Dealing with the ThinkPad hardware mixer
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Dealing with the ThinkPad hardware mixer
  • From: luto@xxxxxxx (Andrew Lutomirski)
• Dealing with the ThinkPad hardware mixer
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Dealing with the ThinkPad hardware mixer
  • From: luto@xxxxxxx (Andrew Lutomirski)
• How to change profile of bluetooth headset for different applications?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• How to debug a "protocol error" message?
  • From: qiet72@xxxxxxxxx (Quinn Plattel)
• How to redirect pulse audio through ssh?
  • From: qiet72@xxxxxxxxx (Quinn Plattel)
• How to change profile of bluetooth headset for different applications?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• Strange parsing module args?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• How to redirect pulse audio through ssh?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• How to redirect pulse audio through ssh?
  • From: qiet72@xxxxxxxxx (Quinn Plattel)
• [PATCH] tsched_buffer_size parameter support for alsa-sink
  • From: wangxingchao2011@xxxxxxxxx (wangxingchao2011@xxxxxxxxx)
• How to redirect pulse audio through ssh?
  • From: qiet72@xxxxxxxxx (Quinn Plattel)
• How to redirect pulse audio through ssh?
  • From: qiet72@xxxxxxxxx (Quinn Plattel)
• How to redirect pulse audio through ssh?
  • From: qiet72@xxxxxxxxx (Quinn Plattel)
• Test Post via FDO
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• How to redirect pulse audio through ssh?
  • From: qiet72@xxxxxxxxx (Quinn Plattel)
• [ANNOUNCE] Mailing Lists Move
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [RFC] Source Output Volumes
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Call for PA related blog feeds
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• How to redirect pulse audio through ssh?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• How to redirect pulse audio through ssh?
  • From: qiet72@xxxxxxxxx (Quinn Plattel)
• Strange parsing module args?
  • From: marcin@xxxxxxxxxx (marcin@xxxxxxxxxx)
• How to redirect pulse audio through ssh?
  • From: qiet72@xxxxxxxxx (Quinn Plattel)
• How to redirect pulse audio through ssh?
  • From: qiet72@xxxxxxxxx (Quinn Plattel)
• How to redirect pulse audio through ssh?
  • From: qiet72@xxxxxxxxx (Quinn Plattel)
• How to redirect pulse audio through ssh?
  • From: qiet72@xxxxxxxxx (Quinn Plattel)
• Glitches on null sink?
  • From: marcin@xxxxxxxxxx (marcin@xxxxxxxxxx)
• Trying to make pulseaudio play audio using Ofono's HFP
  • From: lamarque@xxxxxxxxx (Lamarque Vieira Souza)
• How to redirect pulse audio through ssh?
  • From: ffrigerio@xxxxxxxxxxx (Fred Frigerio)
• How to redirect pulse audio through ssh?
  • From: qiet72@xxxxxxxxx (Quinn Plattel)
• How to redirect pulse audio through ssh?
  • From: qiet72@xxxxxxxxx (Quinn Plattel)
• How to redirect pulse audio through ssh?
  • From: qiet72@xxxxxxxxx (Quinn Plattel)
• How to redirect pulse audio through ssh?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [ANNOUNCE] Git repository move.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• How to redirect pulse audio through ssh?
  • From: qiet72@xxxxxxxxx (Quinn Plattel)
• [PATCH 1/2] alsa: add jack detection support
  • From: jedu@xxxxxxxxxxxxxxx (Jorge Eduardo Candelaria)
• [RFC] Source Output Volumes
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [RFC] Source Output Volumes
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Jack detection
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [RFC] Source Output Volumes
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCHv3 0/4] Read and store UCM data as proplist
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [RFC] Source Output Volumes
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Jack detection
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Jack detection
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [HEADSUP] Please submit something for the Audio track at LPC!
  • From: lennart@xxxxxxxxxxxxxx (Lennart Poettering)
• [PATCH 1/2] alsa: add jack detection support
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Jack detection (was: Re: [PATCHv3 0/4] Read and store UCM data as proplist)
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] alsa-mixer: When setting hw volume, round always up with playback and always down with capture.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] alsa-mixer: When setting hw volume, round always up with playback and always down with capture.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCHv3 0/4] Read and store UCM data as proplist
  • From: jedu@xxxxxxxxxxxxxxx (Jorge Eduardo Candelaria)
• [PATCH 2/2] alsa: load jack detection module
  • From: jedu@xxxxxxxxxxxxxxx (Jorge Eduardo Candelaria)
• [PATCH 1/2] alsa: add jack detection support
  • From: jedu@xxxxxxxxxxxxxxx (Jorge Eduardo Candelaria)
• [PATCH 0/0] Jack detection support.
  • From: jedu@xxxxxxxxxxxxxxx (Jorge Eduardo Candelaria)
• Assertion '(size_t) decoded == a2dp->frame_length' failed at modules/bluetooth/module-bluetooth-device
  • From: h.patil@xxxxxxxxxxxxx (h.patil@xxxxxxxxxxxxx)
• Assertion '(size_t) decoded == a2dp->frame_length' failed at modules/bluetooth/module-bluetooth-device
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• How to find the latest created bluetooth sink/source via event hook?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• How to find the latest created bluetooth sink/source via event hook?
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• How to find the latest created bluetooth sink/source via event hook?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• Debugging Pulse Audio
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Debugging Pulse Audio
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• [PACKAGERS] New dep on json-c
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• Assertion '(size_t) decoded == a2dp->frame_length' failed at modules/bluetooth/module-bluetooth-device
  • From: h.patil@xxxxxxxxxxxxx (h.patil@xxxxxxxxxxxxx)
• Assertion '(size_t) decoded == a2dp->frame_length' failed at modules/bluetooth/module-bluetooth-device
  • From: h.patil@xxxxxxxxxxxxx (h.patil@xxxxxxxxxxxxx)
• Receiving RTP streams with pulseaudio
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Receiving RTP streams with pulseaudio
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• Receiving RTP streams with pulseaudio
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• build error
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• my paulseaudio is not running as daemon
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Receiving RTP streams with pulseaudio
  • From: michael@xxxxxxxxxx (Michael Trunner)
• build error
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• my paulseaudio is not running as daemon
  • From: zhen.fu@xxxxxxxxx (Fu, Zhen)
• [PATCHv3 0/4] Read and store UCM data as proplist
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• my paulseaudio is not running as daemon
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• build error
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• build error
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• How to find the latest created bluetooth sink/source via event hook?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• my paulseaudio is not running as daemon
  • From: zhen.fu@xxxxxxxxx (Fu, Zhen)
• my paulseaudio is not running as daemon
  • From: zhen.fu@xxxxxxxxx (Fu, Zhen)
• my paulseaudio is not running as daemon
  • From: zhen.fu@xxxxxxxxx (Fu, Zhen)
• [PATCHv3 0/4] Read and store UCM data as proplist
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• Receiving RTP streams with pulseaudio
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• build error
  • From: himanshu.chug@xxxxxxxxx (Himanshu Chug)
• [PATCHv3 0/4] Read and store UCM data as proplist
  • From: jedu@xxxxxxxxxxxxxxx (Jorge Eduardo Candelaria)
• How to find the latest created bluetooth sink/source via event hook?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• unambiguous tag names in the repository
  • From: felipe.contreras@xxxxxxxxx (Felipe Contreras)
• Reciving RTP streams with pulseaudio
  • From: michael@xxxxxxxxxx (Michael Trunner)
• Reciving RTP streams with pulseaudio
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Howto recieve audio over RTP
  • From: michael@xxxxxxxxxx (Michael Trunner)
• Reciving RTP streams with pulseaudio
  • From: michael@xxxxxxxxxx (Michael Trunner)
• Howto recieve audio over RTP
  • From: michael@xxxxxxxxxx (Michael Trunner)
• [PATCH] alsa-mixer: When setting hw volume, round always up with playback and always down with capture.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• volume ramping
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• volume ramping
  • From: baeksan@xxxxxxxxxxxxxxxxxx (Baek Chang)
• [PATCHv3 0/4] Read and store UCM data as proplist
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• Jack detection (was: Re: [PATCHv3 0/4] Read and store UCM data as proplist)
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Assertion '(size_t) decoded == a2dp->frame_length' failed at modules/bluetooth/module-bluetooth-device
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] alsa-mixer: When setting hw volume, round always up with playback and always down with capture.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Assertion '(size_t) decoded == a2dp->frame_length' failed at modules/bluetooth/module-bluetooth-device
  • From: h.patil@xxxxxxxxxxxxx (h.patil@xxxxxxxxxxxxx)
• [PATCH] alsa-mixer: When setting hw volume, round always up with playback and always down with capture.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• volume ramping
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• volume ramping
  • From: baeksan@xxxxxxxxxxxxxxxxxx (Baek Chang)
• [PATCH] alsa-mixer: When setting hw volume, round always up with playback and always down with capture.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• multiseat and PulseAudio?
  • From: poort@xxxxxxxxxx (duportail)
• [PACKAGERS] New dep
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• multiseat and PulseAudio?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• multiseat and PulseAudio?
  • From: mangoo@xxxxxxxx (Tomasz Chmielewski)
• multiseat and PulseAudio?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• multiseat and PulseAudio?
  • From: michal@xxxxxxxxxx (Michał Sawicz)
• [PATCH] alsa-mixer: When setting hw volume, round always up with playback and always down with capture.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• multiseat and PulseAudio?
  • From: mangoo@xxxxxxxx (Tomasz Chmielewski)
• multiseat and PulseAudio?
  • From: mangoo@xxxxxxxx (Tomasz Chmielewski)
• multiseat and PulseAudio?
  • From: poort@xxxxxxxxxx (duportail)
• multiseat and PulseAudio?
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 4/4] alsa-mixer: Add force-hw-volume flag to alsa profile sets
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] alsa-mixer: When setting hw volume, round always up with playback and always down with capture.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] loopback: Add a modarg for disabling remixing.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] loopback: Add a modarg for disabling remixing.
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• [pulseaudio-discuss] Reverting ade0a6f88464d8aecf83982d400ccfc402341920
  • From: broonie@xxxxxxxxxxxxx (Mark Brown)
• [PATCH] alsa-mixer: When setting hw volume, round always up with playback and always down with capture.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] alsa-mixer: When setting hw volume, round always up with playback and always down with capture.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] loopback: Add a modarg for disabling remixing.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] bluetooth: Add missing return statement.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 4/4] alsa-mixer: Add force-hw-volume flag to alsa profile sets
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 2/4] suspend-on-idle: Trigger mempool vacuuming
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 1/4] protocol-native: Stop auto timing updates if connected to suspended sink or source
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• review+pull-request: Passthrough support
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Assertion '(size_t) decoded == a2dp->frame_length' failed at modules/bluetooth/module-bluetooth-device
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• review+pull-request: Passthrough support
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• multiseat and PulseAudio?
  • From: mangoo@xxxxxxxx (Tomasz Chmielewski)
• [PATCH] loopback: Add a modarg for disabling remixing.
  • From: marcin@xxxxxxxxxx (marcin@xxxxxxxxxx)
• [PATCH] loopback: Add a modarg for disabling remixing.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] bluetooth: Add missing return statement.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Reverting ade0a6f88464d8aecf83982d400ccfc402341920
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Is there any way to remap source channels?
  • From: marcin@xxxxxxxxxx (marcin@xxxxxxxxxx)
• Is there any way to remap source channels?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Reverting ade0a6f88464d8aecf83982d400ccfc402341920
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Is there any way to remap source channels?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Is there any way to remap source channels?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Reverting ade0a6f88464d8aecf83982d400ccfc402341920
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [pulseaudio-discuss] Reverting ade0a6f88464d8aecf83982d400ccfc402341920
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Is there any way to remap source channels?
  • From: marcin@xxxxxxxxxx (marcin@xxxxxxxxxx)
• Is there any way to remap source channels?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Is there any way to remap source channels?
  • From: marcin@xxxxxxxxxx (marcin@xxxxxxxxxx)
• Reverting ade0a6f88464d8aecf83982d400ccfc402341920
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Reverting ade0a6f88464d8aecf83982d400ccfc402341920
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Reverting ade0a6f88464d8aecf83982d400ccfc402341920
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Are "_ref" and "_unref" not necessarily called in pairs?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• Assertion '(size_t) decoded == a2dp->frame_length' failed at modules/bluetooth/module-bluetooth-device
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Assertion '(size_t) decoded == a2dp->frame_length' failed at modules/bluetooth/module-bluetooth-device
  • From: vincentx.becker@xxxxxxxxx (Becker, VincentX)
• Assertion '(size_t) decoded == a2dp->frame_length' failed at modules/bluetooth/module-bluetooth-device
  • From: h.patil@xxxxxxxxxxxxx (h.patil@xxxxxxxxxxxxx)
• Assertion '(size_t) decoded == a2dp->frame_length' failed at modules/bluetooth/module-bluetooth-device
  • From: zonque@xxxxxxxxx (Daniel Mack)
• Assertion '(size_t) decoded == a2dp->frame_length' failed at modules/bluetooth/module-bluetooth-device
  • From: vincentx.becker@xxxxxxxxx (Becker, VincentX)
• Are "_ref" and "_unref" not necessarily called in pairs?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Are "_ref" and "_unref" not necessarily called in pairs?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• [PATCHv3 0/4] Read and store UCM data as proplist
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Assertion '(size_t) decoded == a2dp->frame_length' failed at modules/bluetooth/module-bluetooth-device
  • From: h.patil@xxxxxxxxxxxxx (h.patil@xxxxxxxxxxxxx)
• [PATCHv3 0/4] Read and store UCM data as proplist
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCHv3 0/4] Read and store UCM data as proplist
  • From: jedu@xxxxxxxxxxxxxxx (Jorge Eduardo Candelaria)
• module combine not respecting requested latencies
  • From: m.b.lankhorst@xxxxxxxxx (Maarten Lankhorst)
• [PATCHv3 0/4] Read and store UCM data as proplist
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] echo-cancel: Remove unnecessary noalign attribute
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] echo-cancel: Handle alignment requirement manually
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Is it possible to compress pulseaudio's network streams?
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Is it possible to compress pulseaudio's network streams?
  • From: mail@xxxxxxxxxxxxx (Aitor Pazos)
• [PATCHv3 4/4] alsa: Support UCM profiles in module-alsa-card
  • From: jedu@xxxxxxxxxxxxxxx (Jorge Eduardo Candelaria)
• [PATCHv3 3/4] alsa: Add UCM API for managing UCM propoerties
  • From: jedu@xxxxxxxxxxxxxxx (Jorge Eduardo Candelaria)
• [PATCHv3 2/4] alsa: Add UCM proplist items
  • From: jedu@xxxxxxxxxxxxxxx (Jorge Eduardo Candelaria)
• [PATCHv3 1/4] alsa: Export alsa-mixer API
  • From: jedu@xxxxxxxxxxxxxxx (Jorge Eduardo Candelaria)
• [PATCHv3 0/4] Read and store UCM data as proplist
  • From: jedu@xxxxxxxxxxxxxxx (Jorge Eduardo Candelaria)
• PulseAudio automatically shutting down?
  • From: marcin@xxxxxxxxxx (marcin@xxxxxxxxxx)
• How pulseaudio support autospawn?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• PulseAudio automatically shutting down?
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• PulseAudio automatically shutting down?
  • From: marcin@xxxxxxxxxx (marcin@xxxxxxxxxx)
• [PATCH] echo-cancel: Remove unnecessary noalign attribute
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• How pulseaudio support autospawn?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• several seconds delay while playing video with timer-based audio scheduling enabled
  • From: vivian.zhang@xxxxxxxxx (Zhang, Vivian)
• module combine not respecting requested latencies
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• module combine not respecting requested latencies
  • From: m.b.lankhorst@xxxxxxxxx (Maarten Lankhorst)
• [PATCH] echo-cancel: Handle alignment requirement manually
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• unambiguous tag names in the repository
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• unambiguous tag names in the repository
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• several seconds delay while playing video with timer-based audio scheduling enabled
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• several seconds delay while playing video with timer-based audio scheduling enabled
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• several seconds delay while playing video with timer-based audio scheduling enabled
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• several seconds delay while playing video with timer-based audio scheduling enabled
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• several seconds delay while playing video with timer-based audio scheduling enabled
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• several seconds delay while playing video with timer-based audio scheduling enabled
  • From: wangxingchao2011@xxxxxxxxx (xing wang)
• realtime kernel RLIMIT_RTTIME crashes, rewinds
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• realtime kernel RLIMIT_RTTIME crashes, rewinds
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• rewind and underrun issues on start of playback
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• rewind and underrun issues on start of playback
  • From: danmbox@xxxxxxxxx (Dan Muresan)
• rewind and underrun issues on start of playback
  • From: broonie@xxxxxxxxxxxxx (Mark Brown)
• rewind and underrun issues on start of playback
  • From: baeksan@xxxxxxxxxxxxxxxxxx (Baek Chang)
• ORC buildsystem problems
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• ORC buildsystem problems
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• rewind and underrun issues on start of playback
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• review+pull-request: Passthrough support
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] filter-apply: Mark modules as being autoloaded
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• ORC buildsystem problems
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• ORC buildsystem problems
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• ORC buildsystem problems
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• review+pull-request: Passthrough support
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] filter-apply: Mark modules as being autoloaded
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• unsubscribe me please.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• rewind and underrun issues on start of playback
  • From: baeksan@xxxxxxxxxxxxxxxxxx (Baek Chang)
• rewind and underrun issues on start of playback
  • From: baeksan@xxxxxxxxxxxxxxxxxx (Baek Chang)
• rewind and underrun issues on start of playback
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• unsubscribe me please.
  • From: dmcgarrett@xxxxxxxxxxxxx (Doug)
• rewind and underrun issues on start of playback
  • From: baeksan@xxxxxxxxxxxxxxxxxx (Baek Chang)
• [PATCH] Make connect-stress test compile for win32
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Make connect-stress test compile for win32
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• ANN: Rename of module-combine
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 1/3] bluetooth: fix not updating sample spec when using Media API
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Cleanup of configure.ac
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 7/7] build-system: Small fixes
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 6/7] build-system: Rearrange database selection
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 5/7] build-system: Replace some more conditionals with AS_IF
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 4/7] build-system: Move dependency error messages to outer scope
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 3/7] build-system: Move AC_DEFINE to separate line with AS_IF
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 2/7] build-system: Use AS_IF macro for configure output
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 1/7] build-system: Simplify AC_ARG_ENABLE usage
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Cleanup of configure.ac
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• crackle and stutter
  • From: brian@xxxxxxxxxxxxxxx (Brian J. Murrell)
• [PATCH 3/3] bluetooth: only close SCO if status has changed
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH 2/3] bluetooth: fix using pointer-pointer when appending an array as variant
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH 1/3] bluetooth: fix not updating sample spec when using Media API
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH 0/2] Fixing module-dbus-protocol unloading
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] match: Support for both merging and replacing proplist updates.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 2/2] dbus: Fix the order of freeing stuff when unloading module-dbus-protocol.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 1/2] dbus: Fix connection idxset freeing when unloading the module.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 0/2] Fixing module-dbus-protocol unloading
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] match: Support for both merging and replacing proplist updates.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] module: new null-source module
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] core: Drop empty gaps in the memblockq when playing data from it.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] stream-restore: Enable database dumping if DEBUG_VOLUME is defined.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] stream-restore: Enable database dumping if DEBUG_VOLUME is defined.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] Alsa-plugins: Pulse: Fix snd_pcm_avail returning 0 in some cases
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] stream-restore: Enable database dumping if DEBUG_VOLUME is defined.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)