How to redirect pulse audio through ssh?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Here is pactl stat on the client side:

PULSE_LOG=99 pactl stat
-------------------------------------------------
Using private memory pool with 1024 slots of size 16,0 KiB each, total size
is 16,0 MiB, maximum usable slot size is 16344
Trying to connect to
/home/user/.pulse/fbd5d27658d3fcf30cb25bf800531799:runtime/native...
connect(): No such file or directory (2)
Trying to connect to /var/run/pulse/native...
SHM possible: no
Protocol version: remote 16, local 16
Negotiated SHM: no
Currently in use: 1 blocks containing 16,0 KiB bytes total.
Allocated during whole lifetime: 263989 blocks containing 231,3 MiB bytes
total.
Sample cache size: 0 B
User name: pulse
Host Name: Nokia-N900
Server Name: pulseaudio
Server Version: 0.9.15
Default Sample Specification: s16le 2ch 48000Hz
Default Channel Map: front-left,front-right
Default Sink: sink.music
Default Source: source.record
Cookie: 26e54bb2
-------------------------------------------------

br,
Quinn

On Fri, May 20, 2011 at 6:58 PM, Quinn Plattel <qiet72 at gmail.com> wrote:

> Hi,
>
> This is interesting:
>
> client: ssh -XL 4713:localhost:4713 user at server
> server: PULSE_LOG=99 pactl stat
> ----------------------------------------
> Using shared memory pool with 1024 slots of size 64.0 KiB each, total size
> is 64.0 MiB, maximum usable slot size is 65472
> Trying to connect to
> /home/quinn/.pulse/1ffe0fd6b5c9262aaa374e734c2cc8d0-runtime/native...
> SHM possible: yes
> Protocol version: remote 16, local 16
> Negotiated SHM: yes
> Currently in use: 1 blocks containing 63.9 KiB bytes total.
> Allocated during whole lifetime: 15741 blocks containing 81.5 MiB bytes
> total.
> Sample cache size: 0 B
> User name: quinn
> Host Name: server
> Server Name: pulseaudio
> Server Version: 0.9.21-63-gd3efa-dirty
> Default Sample Specification: s16le 2ch 44100Hz
> Default Channel Map: front-left,front-right
> Default Sink: auto_null
> Default Source: auto_null.monitor
> Cookie: 6ccbf517
> ----------------------------------------
> server: export PULSE_SERVER=localhost:4713
> server: PULSE_LOG=99 pactl stat
> ---------------------------------------
> Using shared memory pool with 1024 slots of size 64.0 KiB each, total size
> is 64.0 MiB, maximum usable slot size is 65472
> Trying to connect to localhost:4713...
> connect(): Connection refused
> Connection failure: Connection refused
> ---------------------------------------
>
> Ideas?
>
> Quinn
>
> On Fri, May 20, 2011 at 5:48 PM, Colin Guthrie <gmane at colin.guthr.ie>wrote:
>
>> Hi,
>>
>> 'Twas brillig, and Quinn Plattel at 20/05/11 15:52 did gyre and gimble:
>> > I am currently trying to attempt to redirect pulse audio sound from a
>> > server to a client through ssh.  I am bit unclear on what the correct
>> > way is of doing it.
>>
>> Firstly, I wrote up how our X11 piggy backing stuff work here:
>>
>>
>> http://colin.guthr.ie/2009/08/sound-on-linux-is-confusing-defuzzing-part-2-pulseaudio/
>>
>>
>> Technically we do not tunnel over SSH directly (this can of course be
>> done, but not automatically as SSH does not know about PA in the same
>> way it knows about X11). We can however piggy back on the X11 forwarding
>> built into SSH for our authentication (cookie) and server connection
>> strings.
>>
>> If this is on a private network (direct routing) then the built in way
>> is the best, but it doesn't go over SSH. You just need to ensure the
>> machine you're sshing from has the netwrok protocol module loaded into
>> PA (pactl load-module module-protocol-native-tcp, or put it in your
>> default.pa) and make sure port 4713/tcp is open for external connections.
>>
>> Also ensure that module-x11-publish is loaded on the client side and you
>> should get some interesting results from "xprop -root | grep PULSE".
>>
>> Then when you ssh with x11 forwarding running the xprop command on the
>> remote machine should show you the same results.
>>
>>
>>
>> If you cannot use the direct connection, just setup TCP tunnels in your
>> SSH config and then hack the PULSE_SERVER property or env var on the
>> remote machine to point to e.g. localhost:4713 which will actually be a
>> tunnel back to localhost:4713 on the remote machine. The PULSE_COOKIE
>> stuff already forwarded should be enough for auth.
>>
>> For debugging connections:
>>
>> PULSE_LOG=99 pactl stat
>>
>> This shows you e.g. the server name it's trying to connect to etc.
>>
>>
>> Hope that helps (although I wrote it really quick so apologies if it
>> doesn't! I'll clarify later if needs be :D)
>>
>> Col
>>
>>
>> --
>>
>> Colin Guthrie
>> gmane(at)colin.guthr.ie
>> http://colin.guthr.ie/
>>
>> Day Job:
>>  Tribalogic Limited [http://www.tribalogic.net/]
>> Open Source:
>>  Mageia Contributor [http://www.mageia.org/]
>>  PulseAudio Hacker [http://www.pulseaudio.org/]
>>  Trac Hacker [http://trac.edgewall.org/]
>>
>> _______________________________________________
>> pulseaudio-discuss mailing list
>> pulseaudio-discuss at mail.0pointer.de
>> https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
>>
>
>
>
>


-- 
Best regards/Med venlig hilsen,
Quinn Plattel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20110520/24272e94/attachment.htm>


[Index of Archives]     [Linux Audio Users]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux