---
configure.ac | 19 +---
m4/acx_pthread.m4 | 348 -----------------------------------------------------
m4/ax_pthread.m4 | 302 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 303 insertions(+), 366 deletions(-)
delete mode 100644 m4/acx_pthread.m4
create mode 100644 m4/ax_pthread.m4
diff --git a/configure.ac b/configure.ac
index 72f44a4..88ad875 100644
--- a/configure.ac
+++ b/configure.ac
@@ -433,24 +433,7 @@ AS_IF([test "$ac_cv_tls" == "__thread"],
# Win32 build breaks with win32 pthread installed
AS_IF([test "x$os_is_win32" != "x1"],
- [ACX_PTHREAD])
-
-AC_CACHE_CHECK([for PTHREAD_PRIO_INHERIT],
- pulseaudio_cv_PTHREAD_PRIO_INHERIT, [
- save_CC=$CC; CC=$PTHREAD_CC
- save_CFLAGS=$CFLAGS; CFLAGS=$PTHREAD_CFLAGS
- save_LIBS=$LIBS; LIBS=$PTHREAD_LIBS
- AC_LINK_IFELSE(
- AC_LANG_PROGRAM([[#include <pthread.h>]], [[int i = PTHREAD_PRIO_INHERIT;]]),
- [pulseaudio_cv_PTHREAD_PRIO_INHERIT=yes],
- [pulseaudio_cv_PTHREAD_PRIO_INHERIT=no])
- CC=$save_CC
- CFLAGS=$save_CFLAGS
- LIBS=$save_LIBS
- ])
-
-AS_IF([test "$pulseaudio_cv_PTHREAD_PRIO_INHERIT" = "yes"],
- AC_DEFINE([HAVE_PTHREAD_PRIO_INHERIT], 1, [Have PTHREAD_PRIO_INHERIT.]))
+ [AX_PTHREAD])
#### Check for libs ####
diff --git a/m4/acx_pthread.m4 b/m4/acx_pthread.m4
deleted file mode 100644
index cbd6bfa..0000000
--- a/m4/acx_pthread.m4
+++ /dev/null
@@ -1,348 +0,0 @@
-dnl @synopsis ACX_PTHREAD([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]])
-dnl
-dnl @summary figure out how to build C programs using POSIX threads
-dnl
-dnl This macro figures out how to build C programs using POSIX threads.
-dnl It sets the PTHREAD_LIBS output variable to the threads library and
-dnl linker flags, and the PTHREAD_CFLAGS output variable to any special
-dnl C compiler flags that are needed. (The user can also force certain
-dnl compiler flags/libs to be tested by setting these environment
-dnl variables.)
-dnl
-dnl Also sets PTHREAD_CC to any special C compiler that is needed for
-dnl multi-threaded programs (defaults to the value of CC otherwise).
-dnl (This is necessary on AIX to use the special cc_r compiler alias.)
-dnl
-dnl NOTE: You are assumed to not only compile your program with these
-dnl flags, but also link it with them as well. e.g. you should link
-dnl with $PTHREAD_CC $CFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS
-dnl $LIBS
-dnl
-dnl If you are only building threads programs, you may wish to use
-dnl these variables in your default LIBS, CFLAGS, and CC:
-dnl
-dnl LIBS="$PTHREAD_LIBS $LIBS"
-dnl CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
-dnl CC="$PTHREAD_CC"
-dnl
-dnl In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute
-dnl constant has a nonstandard name, defines PTHREAD_CREATE_JOINABLE to
-dnl that name (e.g. PTHREAD_CREATE_UNDETACHED on AIX).
-dnl
-dnl ACTION-IF-FOUND is a list of shell commands to run if a threads
-dnl library is found, and ACTION-IF-NOT-FOUND is a list of commands to
-dnl run it if it is not found. If ACTION-IF-FOUND is not specified, the
-dnl default action will define HAVE_PTHREAD.
-dnl
-dnl Please let the authors know if this macro fails on any platform, or
-dnl if you have any other suggestions or comments. This macro was based
-dnl on work by SGJ on autoconf scripts for FFTW (www.fftw.org) (with
-dnl help from M. Frigo), as well as ac_pthread and hb_pthread macros
-dnl posted by Alejandro Forero Cuervo to the autoconf macro repository.
-dnl We are also grateful for the helpful feedback of numerous users.
-dnl
-dnl @category InstalledPackages
-dnl @author Steven G. Johnson <stevenj at alum.mit.edu>
-dnl @version 2006-05-29
-dnl @license GPLWithACException
-dnl
-dnl Checks for GCC shared/pthread inconsistency based on work by
-dnl Marcin Owsiany <marcin at owsiany.pl>
-
-
-AC_DEFUN([ACX_PTHREAD], [
-AC_REQUIRE([AC_CANONICAL_HOST])
-AC_LANG_SAVE
-AC_LANG_C
-acx_pthread_ok=no
-
-# We used to check for pthread.h first, but this fails if pthread.h
-# requires special compiler flags (e.g. on True64 or Sequent).
-# It gets checked for in the link test anyway.
-
-# First of all, check if the user has set any of the PTHREAD_LIBS,
-# etcetera environment variables, and if threads linking works using
-# them:
-if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
- save_LIBS="$LIBS"
- LIBS="$PTHREAD_LIBS $LIBS"
- AC_MSG_CHECKING([for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS])
- AC_TRY_LINK_FUNC(pthread_join, acx_pthread_ok=yes)
- AC_MSG_RESULT($acx_pthread_ok)
- if test x"$acx_pthread_ok" = xno; then
- PTHREAD_LIBS=""
- PTHREAD_CFLAGS=""
- fi
- LIBS="$save_LIBS"
- CFLAGS="$save_CFLAGS"
-fi
-
-# We must check for the threads library under a number of different
-# names; the ordering is very important because some systems
-# (e.g. DEC) have both -lpthread and -lpthreads, where one of the
-# libraries is broken (non-POSIX).
-
-# Create a list of thread flags to try. Items starting with a "-" are
-# C compiler flags, and other items are library names, except for "none"
-# which indicates that we try without any flags at all, and "pthread-config"
-# which is a program returning the flags for the Pth emulation library.
-
-acx_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
-
-# The ordering *is* (sometimes) important. Some notes on the
-# individual items follow:
-
-# pthreads: AIX (must check this before -lpthread)
-# none: in case threads are in libc; should be tried before -Kthread and
-# other compiler flags to prevent continual compiler warnings
-# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
-# -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
-# lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
-# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads)
-# -pthreads: Solaris/gcc
-# -mthreads: Mingw32/gcc, Lynx/gcc
-# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
-# doesn't hurt to check since this sometimes defines pthreads too;
-# also defines -D_REENTRANT)
-# ... -mt is also the pthreads flag for HP/aCC
-# pthread: Linux, etcetera
-# --thread-safe: KAI C++
-# pthread-config: use pthread-config program (for GNU Pth library)
-
-case "${host_cpu}-${host_os}" in
- *solaris*)
-
- # On Solaris (at least, for some versions), libc contains stubbed
- # (non-functional) versions of the pthreads routines, so link-based
- # tests will erroneously succeed. (We need to link with -pthreads/-mt/
- # -lpthread.) (The stubs are missing pthread_cleanup_push, or rather
- # a function called by this macro, so we could check for that, but
- # who knows whether they'll stub that too in a future libc.) So,
- # we'll just look for -pthreads and -lpthread first:
-
- acx_pthread_flags="-pthreads pthread -mt -pthread $acx_pthread_flags"
- ;;
-esac
-
-if test x"$acx_pthread_ok" = xno; then
-for flag in $acx_pthread_flags; do
-
- case $flag in
- none)
- AC_MSG_CHECKING([whether pthreads work without any flags])
- ;;
-
- -*)
- AC_MSG_CHECKING([whether pthreads work with $flag])
- PTHREAD_CFLAGS="$flag"
- ;;
-
- pthread-config)
- AC_CHECK_PROG(acx_pthread_config, pthread-config, yes, no)
- if test x"$acx_pthread_config" = xno; then continue; fi
- PTHREAD_CFLAGS="`pthread-config --cflags`"
- PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
- ;;
-
- *)
- AC_MSG_CHECKING([for the pthreads library -l$flag])
- PTHREAD_LIBS="-l$flag"
- ;;
- esac
-
- save_LIBS="$LIBS"
- save_CFLAGS="$CFLAGS"
- LIBS="$PTHREAD_LIBS $LIBS"
- CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
-
- # Check for various functions. We must include pthread.h,
- # since some functions may be macros. (On the Sequent, we
- # need a special flag -Kthread to make this header compile.)
- # We check for pthread_join because it is in -lpthread on IRIX
- # while pthread_create is in libc. We check for pthread_attr_init
- # due to DEC craziness with -lpthreads. We check for
- # pthread_cleanup_push because it is one of the few pthread
- # functions on Solaris that doesn't have a non-functional libc stub.
- # We try pthread_create on general principles.
- AC_TRY_LINK([#include <pthread.h>],
- [pthread_t th; pthread_join(th, 0);
- pthread_attr_init(0); pthread_cleanup_push(0, 0);
- pthread_create(0,0,0,0); pthread_cleanup_pop(0); ],
- [acx_pthread_ok=yes])
-
- LIBS="$save_LIBS"
- CFLAGS="$save_CFLAGS"
-
- AC_MSG_RESULT($acx_pthread_ok)
- if test "x$acx_pthread_ok" = xyes; then
- break;
- fi
-
- PTHREAD_LIBS=""
- PTHREAD_CFLAGS=""
-done
-fi
-
-# Various other checks:
-if test "x$acx_pthread_ok" = xyes; then
- save_LIBS="$LIBS"
- LIBS="$PTHREAD_LIBS $LIBS"
- save_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
-
- # Detect AIX lossage: JOINABLE attribute is called UNDETACHED.
- AC_MSG_CHECKING([for joinable pthread attribute])
- attr_name=unknown
- for attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
- AC_TRY_LINK([#include <pthread.h>], [int attr=$attr; return attr;],
- [attr_name=$attr; break])
- done
- AC_MSG_RESULT($attr_name)
- if test "$attr_name" != PTHREAD_CREATE_JOINABLE; then
- AC_DEFINE_UNQUOTED(PTHREAD_CREATE_JOINABLE, $attr_name,
- [Define to necessary symbol if this constant
- uses a non-standard name on your system.])
- fi
-
- AC_MSG_CHECKING([if more special flags are required for pthreads])
- flag=no
- case "${host_cpu}-${host_os}" in
- *-aix* | *-freebsd* | *-darwin*) flag="-D_THREAD_SAFE";;
- *solaris* | *-osf* | *-hpux*) flag="-D_REENTRANT";;
- esac
- AC_MSG_RESULT(${flag})
- if test "x$flag" != xno; then
- PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS"
- fi
-
- LIBS="$save_LIBS"
- CFLAGS="$save_CFLAGS"
- # More AIX lossage: must compile with xlc_r or cc_r
- if test x"$GCC" != xyes; then
- AC_CHECK_PROGS(PTHREAD_CC, xlc_r cc_r, ${CC})
- else
- PTHREAD_CC=$CC
- fi
-
- # The next part tries to detect GCC inconsistency with -shared on some
- # architectures and systems. The problem is that in certain
- # configurations, when -shared is specified, GCC "forgets" to
- # internally use various flags which are still necessary.
-
- AC_MSG_CHECKING([whether to check for GCC pthread/shared inconsistencies])
- check_inconsistencies=yes
- case "${host_cpu}-${host_os}" in
- *-darwin*) check_inconsistencies=no ;;
- esac
- if test x"$GCC" != xyes -o "x$check_inconsistencies" != xyes ; then
- AC_MSG_RESULT([no])
- else
- AC_MSG_RESULT([yes])
-
- # In order not to create several levels of indentation, we test
- # the value of "$ok" until we find out the cure or run out of
- # ideas.
- ok="no"
-
- #
- # Prepare the flags
- #
- save_CFLAGS="$CFLAGS"
- save_LIBS="$LIBS"
- save_CC="$CC"
- # Try with the flags determined by the earlier checks.
- #
- # -Wl,-z,defs forces link-time symbol resolution, so that the
- # linking checks with -shared actually have any value
- #
- # FIXME: -fPIC is required for -shared on many architectures,
- # so we specify it here, but the right way would probably be to
- # properly detect whether it is actually required.
- CFLAGS="-shared -fPIC -Wl,-z,defs $CFLAGS $PTHREAD_CFLAGS"
- LIBS="$PTHREAD_LIBS $LIBS"
- CC="$PTHREAD_CC"
-
- AC_MSG_CHECKING([whether -pthread is sufficient with -shared])
- AC_TRY_LINK([#include <pthread.h>],
- [pthread_t th; pthread_join(th, 0);
- pthread_attr_init(0); pthread_cleanup_push(0, 0);
- pthread_create(0,0,0,0); pthread_cleanup_pop(0); ],
- [ok=yes])
-
- if test "x$ok" = xyes; then
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
- fi
-
- #
- # Linux gcc on some architectures such as mips/mipsel forgets
- # about -lpthread
- #
- if test x"$ok" = xno; then
- AC_MSG_CHECKING([whether -lpthread fixes that])
- LIBS="-lpthread $PTHREAD_LIBS $save_LIBS"
- AC_TRY_LINK([#include <pthread.h>],
- [pthread_t th; pthread_join(th, 0);
- pthread_attr_init(0); pthread_cleanup_push(0, 0);
- pthread_create(0,0,0,0); pthread_cleanup_pop(0); ],
- [ok=yes])
-
- if test "x$ok" = xyes; then
- AC_MSG_RESULT([yes])
- PTHREAD_LIBS="-lpthread $PTHREAD_LIBS"
- else
- AC_MSG_RESULT([no])
- fi
- fi
- #
- # FreeBSD 4.10 gcc forgets to use -lc_r instead of -lc
- #
- if test x"$ok" = xno; then
- AC_MSG_CHECKING([whether -lc_r fixes that])
- LIBS="-lc_r $PTHREAD_LIBS $save_LIBS"
- AC_TRY_LINK([#include <pthread.h>],
- [pthread_t th; pthread_join(th, 0);
- pthread_attr_init(0); pthread_cleanup_push(0, 0);
- pthread_create(0,0,0,0); pthread_cleanup_pop(0); ],
- [ok=yes])
-
- if test "x$ok" = xyes; then
- AC_MSG_RESULT([yes])
- PTHREAD_LIBS="-lc_r $PTHREAD_LIBS"
- else
- AC_MSG_RESULT([no])
- fi
- fi
- if test x"$ok" = xno; then
- # OK, we have run out of ideas
- AC_MSG_WARN([Impossible to determine how to use pthreads with shared libraries])
-
- # so it's not safe to assume that we may use pthreads
- acx_pthread_ok=no
- fi
-
- CFLAGS="$save_CFLAGS"
- LIBS="$save_LIBS"
- CC="$save_CC"
- fi
-else
- PTHREAD_CC="$CC"
-fi
-
-AC_SUBST(PTHREAD_LIBS)
-AC_SUBST(PTHREAD_CFLAGS)
-AC_SUBST(PTHREAD_CC)
-
-# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
-if test x"$acx_pthread_ok" = xyes; then
- ifelse([$1],,AC_DEFINE(HAVE_PTHREAD,1,[Define if you have POSIX threads libraries and header files.]),[$1])
- :
-else
- acx_pthread_ok=no
- $2
-fi
-AC_LANG_RESTORE
-])dnl ACX_PTHREAD
diff --git a/m4/ax_pthread.m4 b/m4/ax_pthread.m4
new file mode 100644
index 0000000..94a3b0e
--- /dev/null
+++ b/m4/ax_pthread.m4
@@ -0,0 +1,302 @@
+# ===========================================================================
+# http://www.gnu.org/software/autoconf-archive/ax_pthread.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+# AX_PTHREAD([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]])
+#
+# DESCRIPTION
+#
+# This macro figures out how to build C programs using POSIX threads. It
+# sets the PTHREAD_LIBS output variable to the threads library and linker
+# flags, and the PTHREAD_CFLAGS output variable to any special C compiler
+# flags that are needed. (The user can also force certain compiler
+# flags/libs to be tested by setting these environment variables.)
+#
+# Also sets PTHREAD_CC to any special C compiler that is needed for
+# multi-threaded programs (defaults to the value of CC otherwise). (This
+# is necessary on AIX to use the special cc_r compiler alias.)
+#
+# NOTE: You are assumed to not only compile your program with these flags,
+# but also link it with them as well. e.g. you should link with
+# $PTHREAD_CC $CFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS $LIBS
+#
+# If you are only building threads programs, you may wish to use these
+# variables in your default LIBS, CFLAGS, and CC:
+#
+# LIBS="$PTHREAD_LIBS $LIBS"
+# CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+# CC="$PTHREAD_CC"
+#
+# In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute constant
+# has a nonstandard name, defines PTHREAD_CREATE_JOINABLE to that name
+# (e.g. PTHREAD_CREATE_UNDETACHED on AIX).
+#
+# Also HAVE_PTHREAD_PRIO_INHERIT is defined if pthread is found and the
+# PTHREAD_PRIO_INHERIT symbol is defined when compiling with
+# PTHREAD_CFLAGS.
+#
+# ACTION-IF-FOUND is a list of shell commands to run if a threads library
+# is found, and ACTION-IF-NOT-FOUND is a list of commands to run it if it
+# is not found. If ACTION-IF-FOUND is not specified, the default action
+# will define HAVE_PTHREAD.
+#
+# Please let the authors know if this macro fails on any platform, or if
+# you have any other suggestions or comments. This macro was based on work
+# by SGJ on autoconf scripts for FFTW (http://www.fftw.org/) (with help
+# from M. Frigo), as well as ac_pthread and hb_pthread macros posted by
+# Alejandro Forero Cuervo to the autoconf macro repository. We are also
+# grateful for the helpful feedback of numerous users.
+#
+# Updated for Autoconf 2.68 by Daniel Richard G.
+#
+# LICENSE
+#
+# Copyright (c) 2008 Steven G. Johnson <stevenj at alum.mit.edu>
+# Copyright (c) 2011 Daniel Richard G. <skunk at iSKUNK.ORG>
+#
+# This program is free software: you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation, either version 3 of the License, or (at your
+# option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception, the respective Autoconf Macro's copyright owner
+# gives unlimited permission to copy, distribute and modify the configure
+# scripts that are the output of Autoconf when processing the Macro. You
+# need not follow the terms of the GNU General Public License when using
+# or distributing such scripts, even though portions of the text of the
+# Macro appear in them. The GNU General Public License (GPL) does govern
+# all other use of the material that constitutes the Autoconf Macro.
+#
+# This special exception to the GPL applies to versions of the Autoconf
+# Macro released by the Autoconf Archive. When you make and distribute a
+# modified version of the Autoconf Macro, you may extend this special
+# exception to the GPL to apply to your modified version as well.
+
+#serial 14
+
+AU_ALIAS([ACX_PTHREAD], [AX_PTHREAD])
+AC_DEFUN([AX_PTHREAD], [
+AC_REQUIRE([AC_CANONICAL_HOST])
+AC_LANG_PUSH([C])
+ax_pthread_ok=no
+
+# We used to check for pthread.h first, but this fails if pthread.h
+# requires special compiler flags (e.g. on True64 or Sequent).
+# It gets checked for in the link test anyway.
+
+# First of all, check if the user has set any of the PTHREAD_LIBS,
+# etcetera environment variables, and if threads linking works using
+# them:
+if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ save_LIBS="$LIBS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ AC_MSG_CHECKING([for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS])
+ AC_TRY_LINK_FUNC(pthread_join, ax_pthread_ok=yes)
+ AC_MSG_RESULT($ax_pthread_ok)
+ if test x"$ax_pthread_ok" = xno; then
+ PTHREAD_LIBS=""
+ PTHREAD_CFLAGS=""
+ fi
+ LIBS="$save_LIBS"
+ CFLAGS="$save_CFLAGS"
+fi
+
+# We must check for the threads library under a number of different
+# names; the ordering is very important because some systems
+# (e.g. DEC) have both -lpthread and -lpthreads, where one of the
+# libraries is broken (non-POSIX).
+
+# Create a list of thread flags to try. Items starting with a "-" are
+# C compiler flags, and other items are library names, except for "none"
+# which indicates that we try without any flags at all, and "pthread-config"
+# which is a program returning the flags for the Pth emulation library.
+
+ax_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
+
+# The ordering *is* (sometimes) important. Some notes on the
+# individual items follow:
+
+# pthreads: AIX (must check this before -lpthread)
+# none: in case threads are in libc; should be tried before -Kthread and
+# other compiler flags to prevent continual compiler warnings
+# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
+# -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
+# lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
+# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads)
+# -pthreads: Solaris/gcc
+# -mthreads: Mingw32/gcc, Lynx/gcc
+# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
+# doesn't hurt to check since this sometimes defines pthreads too;
+# also defines -D_REENTRANT)
+# ... -mt is also the pthreads flag for HP/aCC
+# pthread: Linux, etcetera
+# --thread-safe: KAI C++
+# pthread-config: use pthread-config program (for GNU Pth library)
+
+case "${host_cpu}-${host_os}" in
+ *solaris*)
+
+ # On Solaris (at least, for some versions), libc contains stubbed
+ # (non-functional) versions of the pthreads routines, so link-based
+ # tests will erroneously succeed. (We need to link with -pthreads/-mt/
+ # -lpthread.) (The stubs are missing pthread_cleanup_push, or rather
+ # a function called by this macro, so we could check for that, but
+ # who knows whether they'll stub that too in a future libc.) So,
+ # we'll just look for -pthreads and -lpthread first:
+
+ ax_pthread_flags="-pthreads pthread -mt -pthread $ax_pthread_flags"
+ ;;
+
+ *-darwin*)
+ ax_pthread_flags="-pthread $ax_pthread_flags"
+ ;;
+esac
+
+if test x"$ax_pthread_ok" = xno; then
+for flag in $ax_pthread_flags; do
+
+ case $flag in
+ none)
+ AC_MSG_CHECKING([whether pthreads work without any flags])
+ ;;
+
+ -*)
+ AC_MSG_CHECKING([whether pthreads work with $flag])
+ PTHREAD_CFLAGS="$flag"
+ ;;
+
+ pthread-config)
+ AC_CHECK_PROG(ax_pthread_config, pthread-config, yes, no)
+ if test x"$ax_pthread_config" = xno; then continue; fi
+ PTHREAD_CFLAGS="`pthread-config --cflags`"
+ PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
+ ;;
+
+ *)
+ AC_MSG_CHECKING([for the pthreads library -l$flag])
+ PTHREAD_LIBS="-l$flag"
+ ;;
+ esac
+
+ save_LIBS="$LIBS"
+ save_CFLAGS="$CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+
+ # Check for various functions. We must include pthread.h,
+ # since some functions may be macros. (On the Sequent, we
+ # need a special flag -Kthread to make this header compile.)
+ # We check for pthread_join because it is in -lpthread on IRIX
+ # while pthread_create is in libc. We check for pthread_attr_init
+ # due to DEC craziness with -lpthreads. We check for
+ # pthread_cleanup_push because it is one of the few pthread
+ # functions on Solaris that doesn't have a non-functional libc stub.
+ # We try pthread_create on general principles.
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <pthread.h>
+ static void routine(void *a) { a = 0; }
+ static void *start_routine(void *a) { return a; }],
+ [pthread_t th; pthread_attr_t attr;
+ pthread_create(&th, 0, start_routine, 0);
+ pthread_join(th, 0);
+ pthread_attr_init(&attr);
+ pthread_cleanup_push(routine, 0);
+ pthread_cleanup_pop(0) /* ; */])],
+ [ax_pthread_ok=yes],
+ [])
+
+ LIBS="$save_LIBS"
+ CFLAGS="$save_CFLAGS"
+
+ AC_MSG_RESULT($ax_pthread_ok)
+ if test "x$ax_pthread_ok" = xyes; then
+ break;
+ fi
+
+ PTHREAD_LIBS=""
+ PTHREAD_CFLAGS=""
+done
+fi
+
+# Various other checks:
+if test "x$ax_pthread_ok" = xyes; then
+ save_LIBS="$LIBS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+
+ # Detect AIX lossage: JOINABLE attribute is called UNDETACHED.
+ AC_MSG_CHECKING([for joinable pthread attribute])
+ attr_name=unknown
+ for attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <pthread.h>],
+ [int attr = $attr; return attr /* ; */])],
+ [attr_name=$attr; break],
+ [])
+ done
+ AC_MSG_RESULT($attr_name)
+ if test "$attr_name" != PTHREAD_CREATE_JOINABLE; then
+ AC_DEFINE_UNQUOTED(PTHREAD_CREATE_JOINABLE, $attr_name,
+ [Define to necessary symbol if this constant
+ uses a non-standard name on your system.])
+ fi
+
+ AC_MSG_CHECKING([if more special flags are required for pthreads])
+ flag=no
+ case "${host_cpu}-${host_os}" in
+ *-aix* | *-freebsd* | *-darwin*) flag="-D_THREAD_SAFE";;
+ *solaris* | *-osf* | *-hpux*) flag="-D_REENTRANT";;
+ esac
+ AC_MSG_RESULT(${flag})
+ if test "x$flag" != xno; then
+ PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS"
+ fi
+
+ AC_CACHE_CHECK([for PTHREAD_PRIO_INHERIT],
+ ax_cv_PTHREAD_PRIO_INHERIT, [
+ AC_LINK_IFELSE(
+ AC_LANG_PROGRAM([[#include <pthread.h>]], [[int i = PTHREAD_PRIO_INHERIT;]]),
+ [ax_cv_PTHREAD_PRIO_INHERIT=yes],
+ [ax_cv_PTHREAD_PRIO_INHERIT=no])
+ ])
+ AS_IF([test "x$ax_cv_PTHREAD_PRIO_INHERIT" = "xyes"],
+ AC_DEFINE([HAVE_PTHREAD_PRIO_INHERIT], 1, [Have PTHREAD_PRIO_INHERIT.]))
+
+ LIBS="$save_LIBS"
+ CFLAGS="$save_CFLAGS"
+
+ # More AIX lossage: must compile with xlc_r or cc_r
+ if test x"$GCC" != xyes; then
+ AC_CHECK_PROGS(PTHREAD_CC, xlc_r cc_r, ${CC})
+ else
+ PTHREAD_CC=$CC
+ fi
+else
+ PTHREAD_CC="$CC"
+fi
+
+AC_SUBST(PTHREAD_LIBS)
+AC_SUBST(PTHREAD_CFLAGS)
+AC_SUBST(PTHREAD_CC)
+
+# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
+if test x"$ax_pthread_ok" = xyes; then
+ ifelse([$1],,AC_DEFINE(HAVE_PTHREAD,1,[Define if you have POSIX threads libraries and header files.]),[$1])
+ :
+else
+ ax_pthread_ok=no
+ $2
+fi
+AC_LANG_POP
+])dnl AX_PTHREAD
--
1.7.4.1
