Suggested improvements for the raop module

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



'Twas brillig, and Bryan Gleeson at 10/06/11 22:34 did gyre and gimble:
> Colin,
> 
> Attached is a git format-patch for the socket size handling change.
> It simply removes the call to setsockopt so that the OS determined
> value (taken from the sysctl parameters) is used unchanged. The
> default values used in typical Linux distributions should be OK,
> though a user can always change this using sysctl -w.
> 
> After looking further into the fmtp parameter operation I found that
> it did not change the receive window size used, therefore I made no
> changes in this area. There were small differences in the average
> steady-state windowing values used when this parameter was changed,
> but in all cases the same window size of approx 100k was used.

Just a quick note: I've still got this on my todo list, I've not
forgotten. If I get time tonight I'll dig out the APEX and test :D

Col

-- 

Colin Guthrie
gmane(at)colin.guthr.ie
http://colin.guthr.ie/

Day Job:
  Tribalogic Limited [http://www.tribalogic.net/]
Open Source:
  Mageia Contributor [http://www.mageia.org/]
  PulseAudio Hacker [http://www.pulseaudio.org/]
  Trac Hacker [http://trac.edgewall.org/]



[Index of Archives]     [Linux Audio Users]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux