Need help to enable echo cancel in pulseaudio

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2011-08-02 at 12:41 +0530, ABDUL MOIZ wrote:
> 
> Hi Arun,
>  
>          I have solved this issue. the problem was rate. I have set
> rate=8000 in gst-pipeline.
> 
> But I am facing this problem. 
> When I unload the module-suspend-on-idle able to load echo module. and
> then again load module-suspend-on-idle. 

As I said before, the two modules are essentially unrelated. If you're
facing problems, please post logs.

> I have tried gst-launch-0.10 pulsesrc device=hw:0,0 ! pulsesink
> device=plughw:0,7 but not able execute. 

What do you mean by "not able to execute"?

> Does PA echo-cancel module support for USB mic?

module-echo-cancel is currently limited to running on a sink and source
on the same device (that is, driven by the same clock). It cannot
handle, say, echo cancellation between a USB mic source and internal
audio sink since these will be driven by different clocks and will thus
very likely have constant drift.

-- Arun



[Index of Archives]     [Linux Audio Users]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux