Hi Moiz, I posted the link in your thread - Need help to enable echo cancel in pulseaudio. The code works well if no Bluetooth is involved. Thanks Amanda From: ABDUL MOIZ [mailto:abdulmoiz786@xxxxxxxxx] Sent: Thursday, July 28, 2011 2:08 PM To: General PulseAudio Discussion Cc: Lin, Mengdong Subject: Re: How to avoid module-echo-cancel's "Echo-Cancel Source Stream" being created on a monitor source of an ALSA sink? If module-echo-cancel is loaded before the ALSA source is created. Hi Lin, Can you please send me the link for the working pulse audio source code(with echo cancel) as I am also working to get echo cancel module work on my OMAP4 panda board. Thanks, Regards, Abdul Moiz On Thu, Jul 28, 2011 at 11:20 AM, Lin, Mengdong <mengdong.lin at intel.com<mailto:mengdong.lin at intel.com>> wrote: I found the module-echo-cancel's "Echo-Cancel Source Stream" can be created on a monitor source of an new created ALSA sink by mistake, if the real ALSA source is not created yet. Could anyone tell me how to fix this issue? On my MeeGo platform, the ALSA sink/source don't always exist because the ALSA and Bluetooth HSP headset share one hardware data link. So when BT HSP headset is connected, ALSA card will change into a "hsp" profile , remove the "normal" ALSA sink/source pair and create a "hsp" sink/source pair for BT. And after BT HSP headset is disconnected, ALSA card restores its original profile, remove "hsp" sink/source and create "normal" ALSA sink/source again. My problem is that when BT HSP is disconnected during a phone call, I got the above routing error and a pa deadlock described in another loop: http://lists.freedesktop.org/archives/pulseaudio-discuss/2011-July/010741.html The module-echo-cancel is loaded again when the VOIP stream is routing back to the new created ALSA sink. But because the ALSA source is not created yet (will be later), PA routes the "Echo-Cancel Source Stream" to the monitor source of the ALSA sink. How to make "Echo-Cancel Source Stream" link to the right ALSA source, which will be created a little later? Here is the log: I source.c: Created source 8 "alsa_output.platform-pmic_audio.19.intelmadihfheadset.echo-cancel.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I source.c: device.description = "Monitor of Echo-Cancel Sink alsa_output.platform-pmic_audio.19.intelmadihfheadset.echo-cancel on Intel MAD intelmadihfheadset" I source.c: device.class = "monitor" I source.c: device.icon_name = "audio-input-microphone" D classify.c: find_group_for_client (|<null>|0|-1|) => othermedia D module-suspend-on-idle.c: Sink alsa_output.platform-pmic_audio.19.intelmadihfheadset becomes busy. D memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0 D memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0 I source-output.c: Created output 2 "Echo-Cancel Source Stream" on alsa_output.platform-pmic_audio.19.intelmadihfheadset.monitor with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I source-output.c: media.name<http://media.name> = "Echo-Cancel Source Stream" I source-output.c: media.role = "filter" E module-echo-cancel.c: new source output <Echo-Cancel Source Stream> on source <alsa_output.platform-pmic_audio.19.intelmadihfheadset.monitor> Thanks Amanda _______________________________________________ pulseaudio-discuss mailing list pulseaudio-discuss at lists.freedesktop.org<mailto:pulseaudio-discuss at lists.freedesktop.org> http://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/pulseaudio-discuss/attachments/20110728/8e496a95/attachment-0001.htm>
