Pulseaudio Discussion - Date Index

• Thread Index

• [PATCH] core: comment typo
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] core: fix typo in logging
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] core: sample_spec.rate is in Hz, not kHz; change logging output
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] core: fix potential memory leak
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] svolume_{mmx, sse}, sconv_sse: Fix compilation errors with X32 toolchain
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• --disable-nls?
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Bluez-Ofono-PulseAudio Issue.
  • From: wagi@xxxxxxxxx (Daniel Wagner)
• padevchooser replacement
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] bluetooth: Poll BT SCO socket for checking remote disconnect.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• padevchooser replacement
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• padevchooser replacement
  • From: matare@xxxxxxxxxxxxxxxxxx (Victor Mataré)
• padevchooser replacement
  • From: matare@xxxxxxxxxxxxxxxxxx (Victor Mataré)
• Making USB DAC the default sink
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Making USB DAC the default sink
  • From: jeff_barish@xxxxxxxxxxxxx (Jeffrey Barish)
• Making USB DAC the default sink
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• RFC: Loopback module and DONT_MOVE flags + dormant state
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• padevchooser replacement
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Making USB DAC the default sink
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• --disable-nls?
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Making USB DAC the default sink
  • From: jeff_barish@xxxxxxxxxxxxx (Jeffrey Barish)
• padevchooser replacement
  • From: matare@xxxxxxxxxxxxxxxxxx (Victor Mataré)
• RFC: Loopback module and DONT_MOVE flags + dormant state
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• padevchooser replacement
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• padevchooser replacement
  • From: matare@xxxxxxxxxxxxxxxxxx (Victor Mataré)
• --disable-nls?
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• RFC: Loopback module and DONT_MOVE flags + dormant state
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• [PATCH] module-echo-cancel: set file mode to binary in test code
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] resampler-tests: fix compilation w/o NLS support
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• No subject
  • From: bogus@xxxxxxxxxxxxxxxxxx ()
• No subject
  • From: bogus@xxxxxxxxxxxxxxxxxx ()
• [PATCH] resampler-tests: fix compilation w/o NLS support
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH 2/2] bluetooth: When receiving D-Bus errors, print also the error message.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/2] dbus: New helper function: pa_dbus_get_error_message().
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] svolume_{mmx, sse}, sconv_sse: Fix compilation errors with X32 toolchain
  • From: nitin.a.kamble@xxxxxxxxx (Kamble, Nitin A)
• [PATCH] echo-cancel test: fix segfault if invalid AEC method is given and handle mem leaks due to open files
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] module-echo-cancel: begin log message with uppercase letter
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] module-echo-cancel: set file mode to binary in test code
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [RFC] bluetooth: Add support for org.bluez.Adapter and org.bluez.FMRadio.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] stream: fix comments
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] svolume_{mmx, sse}, sconv_sse: Fix compilation errors with X32 toolchain
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] stream: fix comments
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] fix 'e g' as 'e.g.\ '
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• spelling, recieve
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] stream: fix comments
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] fix spelling of initialization in errortab for PA_ERR_MODINITFAILED and the related translations
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] describe proplist return values and clarification
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] fix unknown doxygen command \second
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] typos and formatting in stream.h doxygen documentation
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] typos and rewording of thread-mainloop.h doxygen documentation
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] fix typos in simple.h doxygen documentation
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] fix 'e g' as 'e.g.\ '
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] add section about error handling to doxygen documentation
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] add section about error handling to doxygen documentation
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [RFC] bluetooth: Add support for org.bluez.Adapter and org.bluez.FMRadio.
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• [PATCH] add section about error handling to doxygen documentation
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] add section about error handling to doxygen documentation
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [RFC] bluetooth: Add support for org.bluez.Adapter and org.bluez.FMRadio.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] add section about error handling to doxygen documentation
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• many patches
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• many patches
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] describe proplist return values and clarification
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] consistently use parameter name p for a pa_proplist in prototype
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] fix utf8.h file description
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] fixing typos in proplist.h doxygen documentation
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] add doxygen file description for proplist.h
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] fix unresolved doxygen link pa_port_available_t
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] add description for format.h
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] add periods; fix brief documentationf or pa_format_info_is_pcm() by escaping a period in i.e.
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] fix unknown doxygen command \second
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] add section about error handling to doxygen documentation
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] turn anonymous error code enum into pa_error_code / pa_error_code_t for the purpose of linking to it in doxygen
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [pulseaudio-discuss] =?y?q?=5BPATCH=5D=20fix=20spelling=20of=20initialization=20in=20errortab=20for=20PA=5FERR=5FMODINITFAILED=20and=20the=20related=20translations?=
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• qpaeq equalizer appears to have no effect
  • From: j-frankish@xxxxxxx (John Frankish)
• [PATCH v2] make Adrian's echo cancellation code optional
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH v2] make speex library optional
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] spelling, recieve
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] def.h: document that pa_buffer_attr.maxlength is in bytes, fixes https://bugs.freedesktop.org/show_bug.cgi?id=42919
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] stream: fix comments
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• qpaeq equalizer appears to have no effect
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• qpaeq equalizer appears to have no effect
  • From: j-frankish@xxxxxxx (John Frankish)
• Sharing logged in users instance over TCP better than systemwide daemon?
  • From: graeme.pietersz@xxxxxxxxx (Graeme Pietersz)
• [PATCH] svolume_{mmx, sse}, sconv_sse: Fix compilation errors with X32 toolchain
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• [no subject]
  • From: Nitin A Kamble <nitin.a.kamble@xxxxxxxxx>
• [PATCH] make speex optional, make Adrian AEC optional
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• RFC: Loopback module and DONT_MOVE flags + dormant state
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [RFC] bluetooth: Add support for org.bluez.Adapter and org.bluez.FMRadio.
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [RFC] bluetooth: Add support for org.bluez.Adapter and org.bluez.FMRadio.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/3] bluetooth: Do not switch to profile unless Playing
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] make speex optional, make Adrian AEC optional
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] make speex optional, make Adrian AEC optional
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• [PATCH] make speex optional, make Adrian AEC optional
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• detection of SSE3 support in configure.ac
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• Phone Disconnects If module-loopback is not un-loaded. [BT-PA-Ofono-Bluez]
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• [PATCH] make speex optional, make Adrian AEC optional
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH 1/3] bluetooth: Do not switch to profile unless Playing
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• Phone Disconnects If module-loopback is not un-loaded. [BT-PA-Ofono-Bluez]
  • From: vinodalat@xxxxxxxxx (Vinod)
• detection of SSE3 support in configure.ac
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• detection of SSE3 support in configure.ac
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• detection of SSE3 support in configure.ac
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• detection of SSE3 support in configure.ac
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• [PATCH 1/3] bluetooth: Do not switch to profile unless Playing
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/3] bluetooth: Do not switch to profile unless Playing
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• detection of SSE3 support in configure.ac
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• detection of SSE3 support in configure.ac
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• detection of SSE3 support in configure.ac
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• detection of SSE3 support in configure.ac
  • From: singaravelan.nallasellan@xxxxxxxxx (Nallasellan, Singaravelan)
• detection of SSE3 support in configure.ac
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• [PATCH 2/3] conf-parser: Add support for parsing property lists.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/3] conf-parser: Add support for parsing property lists.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/3] conf-parser: Pass parser state in a struct instead of function parameters.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• detection of SSE3 support in configure.ac
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• detection of SSE3 support in configure.ac
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• [PATCH 2/3] conf-parser: Add support for parsing property lists.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 2/3] conf-parser: Add support for parsing property lists.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• No subject
  • From: bogus@xxxxxxxxxxxxxxxxxx ()
• daemon ping-pongs the sink port
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 2/3] conf-parser: Add support for parsing property lists.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• daemon ping-pongs the sink port
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• PulseAudio Xen module
  • From: gboutsioukis@xxxxxxxxx (Giorgos Boutsioukis)
• daemon ping-pongs the sink port
  • From: sarusama@xxxxxxxxx (Tony Bernardin)
• daemon ping-pongs the sink port
  • From: sarusama@xxxxxxxxx (Tony Bernardin)
• [PATCH 2/3] conf-parser: Add support for parsing property lists.
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 1/3] conf-parser: Pass parser state in a struct instead of function parameters.
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 3/3] alsa-mixer: Add support for defining port property lists in the path configuration files.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/3] conf-parser: Add support for parsing property lists.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/3] conf-parser: Pass parser state in a struct instead of function parameters.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 0/3] Another try at making port properties configurable
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 0/2] Making port proplists configurable via path configuration files
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 0/2] Making port proplists configurable via path configuration files
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 2/2] alsa-mixer: Add support for defining port property lists in the path configuration files.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/2] conf-parser: New function: pa_config_parse_proplist().
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 0/2] Making port proplists configurable via path configuration files
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] Add a property list to ports.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] Alsa: refactor pa_alsa_profile_set_probe
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] Add a property list to ports.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Add a property list to ports.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 6/6] Alsa: add card ports and path probe cache
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] pactl: Show port availability
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] Add a property list to ports.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 6/6] Alsa: add card ports and path probe cache
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• hda-jack-retask - a GUI for easy retasking of your HDA Intel codecs!
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] pactl: Show port availability
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] Add a property list to ports.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] Add a property list to ports.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] Add a property list to ports.
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 6/6] Alsa: add card ports and path probe cache
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] Add a property list to ports.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 1/3] bluetooth: Do not switch to profile unless Playing
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] Fixup a few things in the new path probing
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• daemon ping-pongs the sink port
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• daemon ping-pongs the sink port
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• daemon ping-pongs the sink port
  • From: sarusama@xxxxxxxxx (Tony Bernardin)
• spelling, recieve
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 6/6] Alsa: add card ports and path probe cache
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• spelling, recieve
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• spelling, recieve
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• what's the minimum requirement for a PA sink module
  • From: dy_wang@xxxxxxxxx (wang dengyi)
• spelling, recieve
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• Bluez-Ofono-PulseAudio Issue.
  • From: bhattad.jeetendra@xxxxxxxxx (JEETENDRA BHATTAD)
• "list-sinks" doesn't match "aplay -l"
  • From: cyrusv@xxxxxxx (Cyrus Vafadari)
• "list-sinks" doesn't match "aplay -l"
  • From: cyrusv@xxxxxxx (Cyrus Vafadari)
• [PATCH] Ignore the virtual "thinkpad-acpi" card
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Ignore the virtual "thinkpad-acpi" card
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• RFC: Routing and Priority lists
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• "list-sinks" doesn't match "aplay -l"
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• "list-sinks" doesn't match "aplay -l"
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• No subject
  • From: bogus@xxxxxxxxxxxxxxxxxx ()
• "list-sinks" doesn't match "aplay -l"
  • From: cyrusv@xxxxxxx (Cyrus Vafadari)
• RFC: Routing and Priority lists
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Playback and Recording isn't working simultaneously
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• RFC: Routing and Priority lists
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• echo-cancel test program: fix memory leak
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• echo-cancel test program: fix memory leak
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• RFC: Routing and Priority lists
  • From: jankovac503@xxxxxxxxx (Janos Kovacs)
• RFC: Routing and Priority lists
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/8] build-sys: Remove check for alloca()
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• RFC: Routing and Priority lists
  • From: xavier.bestel@xxxxxxx (Xavier Bestel)
• RFC: Routing and Priority lists
  • From: jankovac503@xxxxxxxxx (Janos Kovacs)
• [PATCH 2/8] build-sys: Remove check for alloca()
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 8/8] Improve performance of peaks resampler
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] resampler: Some minor tweaks
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 8/8] Improve performance of peaks resampler
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] resampler: Some minor tweaks
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Playback and Recording isn't working simultaneously
  • From: sayem64@xxxxxxxxx (Sayem Ahmed)
• [SOLVED] usb sound card: PCM has 8 channels, thats too much & cannot submit datapipe for urb 0
  • From: Martin@xxxxxxxxxxxx (Martin Steigerwald)
• raop module and audio data port
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] tests: Don't link tests that only use public api to libpulsecommon
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Hardcode FRAME_SIZE_MAX_ALLOW
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• System freeze
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 8/8] Improve performance of peaks resampler
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 4/8] Avoid some compiler warnings when cross-compiling for mingw32
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Hardcode FRAME_SIZE_MAX_ALLOW
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] Update LICENSE
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 1/8] build-sys: Use configure cache by default in bootstrap
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Simplify list free functions
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Update LICENSE
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Hardcode FRAME_SIZE_MAX_ALLOW
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 1/4] Use fastpath assert in trivial resampler
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 3/3] bluetooth: Fix property reply handling for hfgw
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 0/6] Jack detection patches...
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 0/6] Jack detection patches...
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 0/6] Jack detection patches...
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 0/6] Jack detection patches...
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 6/6] Alsa: add card ports and path probe cache
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 5/6] cli: Show card ports and jack detection status
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 4/6] Notify port available status changes, and update protocol version
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 3/6] Cards now has ports directly, and device port has list of profiles
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 2/6] Turn device ports into reference counted objects
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 1/6] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 0/6] Jack detection patches...
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 3/3] bluetooth: Fix property reply handling for hfgw
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH 2/3] bluetooth: Avoid duplicating profile argument twice
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH 1/3] bluetooth: Do not switch to profile unless Playing
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• RFC: Routing and Priority lists
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 1/3] bluetooth: Do not switch to profile unless Playing
  • From: mikel.astiz@xxxxxxxxxxxx (Mikel Astiz)
• [PATCH 1/3] bluetooth: Do not switch to profile unless Playing
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 1/3] bluetooth: Do not switch to profile unless Playing
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• RFC: Routing and Priority lists
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• RFC: Routing and Priority lists
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• RFC: Routing and Priority lists
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• RFC: Routing and Priority lists
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• RFC: Routing and Priority lists
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• RFC: Routing and Priority lists
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 3/3] bluetooth: Fix property reply handling for hfgw
  • From: mikel.astiz@xxxxxxxxxxxx (Mikel Astiz)
• [PATCH 2/3] bluetooth: Avoid duplicating profile argument twice
  • From: mikel.astiz@xxxxxxxxxxxx (Mikel Astiz)
• [PATCH 1/3] bluetooth: Do not switch to profile unless Playing
  • From: mikel.astiz@xxxxxxxxxxxx (Mikel Astiz)
• [PATCH 0/3] Bluetooth fixes
  • From: mikel.astiz@xxxxxxxxxxxx (Mikel Astiz)
• [PATCH 4/4] Optimize trivial resampler
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 3/4] Use better variable name in trivial resampler
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 2/4] Disable fastpath asserts by default
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 1/4] Use fastpath assert in trivial resampler
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• RFC: Routing and Priority lists
  • From: jankovac503@xxxxxxxxx (Janos Kovacs)
• RFC: Routing and Priority lists
  • From: jankovac503@xxxxxxxxx (Janos Kovacs)
• [PATCH] Hardcode FRAME_SIZE_MAX_ALLOW
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] Update LICENSE
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH]: High-definition audio pass-through support
  • From: kelly@xxxxxxxxxxxxxxxxxxxx (Kelly Anderson)
• System freeze
  • From: dirkydirk@xxxxxxx (dirkydirk)
• [PATCH]: High-definition audio pass-through support
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH]: High-definition audio pass-through support
  • From: kelly@xxxxxxxxxxxxxxxxxxxx (Kelly Anderson)
• [PATCH]: High-definition audio pass-through support
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH]: High-definition audio pass-through support
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH]: High-definition audio pass-through support
  • From: kelly@xxxxxxxxxxxxxxxxxxxx (Kelly Anderson)
• RFC: Routing and Priority lists
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• RFC: Routing and Priority lists
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH]: High-definition audio pass-through support
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [SOLVED] usb sound card: PCM has 8 channels, thats too much & cannot submit datapipe for urb 0
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] Add pure and const attributes to functions that need them
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH]: High-definition audio pass-through support
  • From: kelly@xxxxxxxxxxxxxxxxxxxx (Kelly Anderson)
• [PATCH]: High-definition audio pass-through support
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [SOLVED] usb sound card: PCM has 8 channels, thats too much & cannot submit datapipe for urb 0
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [SOLVED] usb sound card: PCM has 8 channels, thats too much & cannot submit datapipe for urb 0
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [SOLVED] usb sound card: PCM has 8 channels, thats too much & cannot submit datapipe for urb 0
  • From: Martin@xxxxxxxxxxxx (Martin Steigerwald)
• usb sound card: PCM has 8 channels, thats too much & cannot submit datapipe for urb 0
  • From: Martin@xxxxxxxxxxxx (Martin Steigerwald)
• [PATCH]: High-definition audio pass-through support
  • From: kelly@xxxxxxxxxxxxxxxxxxxx (Kelly Anderson)
• [PATCH]: High-definition audio pass-through support
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• System freeze
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• pavu control in the system tray
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• System freeze
  • From: dirkydirk@xxxxxxx (dirkydirk)
• System freeze
  • From: zonque@xxxxxxxxx (Daniel Mack)
• pavu control in the system tray
  • From: bearcat@xxxxxxxxxxxxxxx ("Bearcat M. Şandor")
• [RFC 0/5] bluetooth: Use BlueZ's media API only
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [RFC 3/5] bluetooth: Avoid using IPC mechanism to BlueZ
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• System freeze
  • From: dirkydirk@xxxxxxx (dirkydirk)
• [PATCH]: High-definition audio pass-through support
  • From: kelly@xxxxxxxxxxxxxxxxxxxx (Kelly Anderson)
• [PATCH]: High-definition audio pass-through support
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• System freeze
  • From: zonque@xxxxxxxxx (Daniel Mack)
• [PATCH]: High-definition audio pass-through support
  • From: kelly@xxxxxxxxxxxxxxxxxxxx (Kelly Anderson)
• System freeze
  • From: dirkydirk@xxxxxxx (dirkydirk)
• RFC: Routing and Priority lists
  • From: jankovac503@xxxxxxxxx (Janos Kovacs)
• pasystray, a replacement for padevchooser
  • From: christoph.gysin@xxxxxxxxx (Christoph Gysin)
• pasystray, a replacement for padevchooser
  • From: christoph.gysin@xxxxxxxxx (Christoph Gysin)
• [PATCH] Remove pa_prioq priority queue implementation
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] Remove pa_prioq priority queue implementation
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [RFC 0/5] bluetooth: Use BlueZ's media API only
  • From: mikel.astiz@xxxxxxxxxxxx (Mikel Astiz)
• [PATCH 2/2] Use simple free function in pa_queue_free
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 1/2] Use simple free function in pa_dynarray_free
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Simplify list free functions
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH]: High-definition audio pass-through support
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH]: High-definition audio pass-through support
  • From: kelly@xxxxxxxxxxxxxxxxxxxx (Kelly Anderson)
• [RFC 0/5] bluetooth: Use BlueZ's media API only
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [RFC 0/5] bluetooth: Use BlueZ's media API only
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• PulseAudio Xen module
  • From: gboutsioukis@xxxxxxxxx (Giorgos Boutsioukis)
• [PATCH] Add pure and const attributes to functions that need them
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [RFC Patch 4/4] Support UCM in Pulseaudio
  • From: feng.wei@xxxxxxxxxx (Feng Wei)
• RFC: Routing and Priority lists
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 6/6] Alsa: add card ports and path probe cache
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [RFC 5/5] bluetooth: Change profile to a2dp_source automatically
  • From: mikel.astiz@xxxxxxxxxxxx (Mikel Astiz)
• [RFC 4/5] bluetooth: Removed library for IPC to BlueZ
  • From: mikel.astiz@xxxxxxxxxxxx (Mikel Astiz)
• [RFC 3/5] bluetooth: Avoid using IPC mechanism to BlueZ
  • From: mikel.astiz@xxxxxxxxxxxx (Mikel Astiz)
• [RFC 2/5] bluetooth: Avoid duplicating profile argument twice
  • From: mikel.astiz@xxxxxxxxxxxx (Mikel Astiz)
• [RFC 1/5] bluetooth: Fix property reply handling for hfgw
  • From: mikel.astiz@xxxxxxxxxxxx (Mikel Astiz)
• [RFC 0/5] bluetooth: Use BlueZ's media API only
  • From: mikel.astiz@xxxxxxxxxxxx (Mikel Astiz)
• alsa: split up 6-channel streams into 3 stereo pairs?
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• libpulsecore dependency on libpulsecommon
  • From: brian.cameron@xxxxxxxxxx (Brian Cameron)
• RFC: Routing and Priority lists
  • From: jankovac503@xxxxxxxxx (Janos Kovacs)
• libpulsecore dependency on libpulsecommon
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] tests: Don't link tests that only use public api to libpulsecommon
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• libpulsecore dependency on libpulsecommon
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• alsa: split up 6-channel streams into 3 stereo pairs?
  • From: zonque@xxxxxxxxx (Daniel Mack)
• [RFC Patch 0/3] Support UCM in Pulseaudio
  • From: feng.wei@xxxxxxxxxx (Feng Wei)
• [RFC Patch 0/3] Support UCM in Pulseaudio
  • From: lrg@xxxxxx (Girdwood, Liam)
• [RFC Patch 3/3] Support UCM in Pulseaudio
  • From: feng.wei@xxxxxxxxxx (Feng Wei)
• [RFC Patch 2/3] Support UCM in Pulseaudio
  • From: feng.wei@xxxxxxxxxx (Feng Wei)
• [RFC Patch 1/3] Support UCM in Pulseaudio
  • From: feng.wei@xxxxxxxxxx (Feng Wei)
• [RFC Patch 0/3] Support UCM in Pulseaudio
  • From: feng.wei@xxxxxxxxxx (Feng Wei)
• PulseAudio shared memory files
  • From: brian.cameron@xxxxxxxxxx (Brian Cameron)
• [PATCH 1/8] build-sys: Use configure cache by default in bootstrap
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] Remove pulsecore/shmasyncq.[ch]
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] Remove pulsecore/shmasyncq.[ch]
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 2/2] Improve performance of peaks resampler
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 1/2] Rework the peaks resampler
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Two patches for the peaks resampler
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• RFC: Routing and Priority lists
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Jack detection - Client API for UIs
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 2/6] Turn device ports into reference counted objects
  • From: broonie@xxxxxxxxxxxxx (Mark Brown)
• Jack detection - Client API for UIs
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• pulseaudio bug in resampler.c method src-linear
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• RFC: Routing and Priority lists
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• RFC: Routing and Priority lists
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Jack detection - Client API for UIs
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 6/6] Alsa: add card ports and path probe cache
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Jack detection - Client API for UIs
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• RFC: Routing and Priority lists
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• [PATCH 6/6] Alsa: add card ports and path probe cache
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Jack detection - Client API for UIs
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• RFC: Routing and Priority lists
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• alsa: split up 6-channel streams into 3 stereo pairs?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• No subject
  • From: bogus@xxxxxxxxxxxxxxxxxx ()
• RFC: Routing and Priority lists
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• RFC: Routing and Priority lists
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• Jack detection - Client API for UIs
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• RFC: Routing and Priority lists
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• RFC: Routing and Priority lists
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• RFC: Routing and Priority lists
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Some various patches
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 6/8] oss: Use log2 function from core-util instead of own implementation
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 5/8] Squash unused variable compiler warning
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 3/8] Remove vector.h and vector-test
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] Remove time-smoother and shm from libpulsecore
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 2/8] build-sys: Remove check for alloca()
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• PulseAudio Xen module
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• PulseAudio Xen module
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] rtpoll: Update comment
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] stream: Prevent s->context->playback_streams from growing indefinitely when uploading and unloading samples through one context.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: linux.news@xxxxxxxxxxx (Ben Bucksch)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: linux.news@xxxxxxxxxxx (Ben Bucksch)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: linux.news@xxxxxxxxxxx (Ben Bucksch)
• RFC: Routing and Priority lists
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• system wide daemon (war: Re: using pulseaudio with simultaneous playback from mutiple X sessions)
  • From: Martin@xxxxxxxxxxxx (Martin Steigerwald)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: linux.news@xxxxxxxxxxx (Ben Bucksch)
• system wide daemon (war: Re: using pulseaudio with simultaneous playback from mutiple X sessions)
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• No subject
  • From: bogus@xxxxxxxxxxxxxxxxxx ()
• alsa: split up 6-channel streams into 3 stereo pairs?
  • From: zonque@xxxxxxxxx (Daniel Mack)
• [PATCH] stream: Prevent s->context->playback_streams from growing indefinitely when uploading and unloading samples through one context.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• Jack detection - Client API for UIs
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• Jack detection - Client API for UIs
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 6/6] Alsa: add card ports and path probe cache
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Jack detection - Client API for UIs
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Jack detection - Client API for UIs
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Jack detection - Client API for UIs
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Jack detection - Client API for UIs
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 6/6] Alsa: add card ports and path probe cache
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 5/6] cli: Show card ports and jack detection status
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 4/6] Notify port available status changes
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 3/6] Cards now has ports directly, and device port has list of profiles
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 2/6] Turn device ports into reference counted objects
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 1/6] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Jack detection - Client API for UIs
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 6/6] Alsa: add card ports and path probe cache
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 4/6] Notify port available status changes
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] alsa-mixer: Take channel mask of volume element into account when finding a subset path
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 4/6] Notify port available status changes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• system wide daemon (war: Re: using pulseaudio with simultaneous playback from mutiple X sessions)
  • From: Martin@xxxxxxxxxxxx (Martin Steigerwald)
• possible policies for recording and for playback (was: Re: using pulseaudio with simultaneous playback from mutiple X sessions)
  • From: Martin@xxxxxxxxxxxx (Martin Steigerwald)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: Martin@xxxxxxxxxxxx (Martin Steigerwald)
• system wide daemon (war: Re: using pulseaudio with simultaneous playback from mutiple X sessions)
  • From: Martin@xxxxxxxxxxxx (Martin Steigerwald)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: linux.news@xxxxxxxxxxx (Ben Bucksch)
• [PATCH 3/6] Cards now has ports directly, and device port has list of profiles
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 3/6] Cards now has ports directly, and device port has list of profiles
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 3/6] Cards now has ports directly, and device port has list of profiles
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: Martin@xxxxxxxxxxxx (Martin Steigerwald)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: linux.news@xxxxxxxxxxx (Ben Bucksch)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: linux.news@xxxxxxxxxxx (Ben Bucksch)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: Martin@xxxxxxxxxxxx (Martin Steigerwald)
• [PATCH 2/6] Turn device ports into reference counted objects
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: Martin@xxxxxxxxxxxx (Martin Steigerwald)
• [PATCH 2/6] Turn device ports into reference counted objects
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 4/6] Notify port available status changes
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 3/6] Cards now has ports directly, and device port has list of profiles
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 3/6] Cards now has ports directly, and device port has list of profiles
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Usage of pa_assert
  • From: lennart@xxxxxxxxxxxxxx (Lennart Poettering)
• [PATCH 2/6] Turn device ports into reference counted objects
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 2/6] Turn device ports into reference counted objects
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/6] Turn device ports into reference counted objects
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Usage of pa_assert
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 3/6] Cards now has ports directly, and device port has list of profiles
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 5/6] cli: Show card ports and jack detection status
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 4/6] Notify port available status changes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/6] Turn device ports into reference counted objects
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 3/6] Cards now has ports directly, and device port has list of profiles
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 4/6] Notify port available status changes
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 4/6] Notify port available status changes
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 4/6] Notify port available status changes
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 3/6] Cards now has ports directly, and device port has list of profiles
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 2/6] Turn device ports into reference counted objects
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 1/6] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 2/6] Turn device ports into reference counted objects
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 6/6] Alsa: add card ports and path probe cache
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 2/6] Turn device ports into reference counted objects
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 5/6] cli: Show card ports and jack detection status
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 4/6] Notify port available status changes
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 2/6] Turn device ports into reference counted objects
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• "Speaker saver" module to notify when sound is needed and when not
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• "Speaker saver" module to notify when sound is needed and when not
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• "Speaker saver" module to notify when sound is needed and when not
  • From: linux.news@xxxxxxxxxxx (Ben Bucksch)
• "Speaker saver" module to notify when sound is needed and when not
  • From: linux.news@xxxxxxxxxxx (Ben Bucksch)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: Martin@xxxxxxxxxxxx (Martin Steigerwald)
• "Speaker saver" module to notify when sound is needed and when not
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: Martin@xxxxxxxxxxxx (Martin Steigerwald)
• Buffering attributes with variable format
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: linux.news@xxxxxxxxxxx (Ben Bucksch)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Reply-to
  • From: felipe.contreras@xxxxxxxxx (Felipe Contreras)
• Buffering attributes with variable format
  • From: felipe.contreras@xxxxxxxxx (Felipe Contreras)
• using pulseaudio with simultaneous playback from mutiple X sessions
  • From: ms@xxxxxxxxx (Martin Steigerwald)
• "Speaker saver" module to notify when sound is needed and when not
  • From: linux.news@xxxxxxxxxxx (Ben Bucksch)
• Buffering attributes with variable format
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• "Speaker saver" module to notify when sound is needed and when not
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Reply-to
  • From: jch@xxxxxxxxxxxxxxx (John Haxby)
• pulseaudio bug in resampler.c method src-linear
  • From: ray.rwalk2730@xxxxxxxxx (Ray Walker)
• "Speaker saver" module to notify when sound is needed and when not
  • From: linux.news@xxxxxxxxxxx (Ben Bucksch)
• "Speaker saver" module to notify when sound is needed and when not
  • From: linux.news@xxxxxxxxxxx (Ben Bucksch)
• Reply-to
  • From: felipe.contreras@xxxxxxxxx (Felipe Contreras)
• Reply-to
  • From: jch@xxxxxxxxxxxxxxx (John Haxby)
• Reply-to
  • From: felipe.contreras@xxxxxxxxx (Felipe Contreras)
• Reply-to
  • From: jch@xxxxxxxxxxxxxxx (John Haxby)
• Reply-to
  • From: felipe.contreras@xxxxxxxxx (Felipe Contreras)
• Reply-to
  • From: jeremy@xxxxxxxxxxx (Jeremy Nickurak)
• Reply-to
  • From: felipe.contreras@xxxxxxxxx (Felipe Contreras)
• Buffering attributes with variable format
  • From: felipe.contreras@xxxxxxxxx (Felipe Contreras)
• EchoCanceller WebRTC
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Notes from the Audio BoFs at Prague
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• EchoCanceller WebRTC
  • From: lenoir@xxxxxxxxxx (Victor Lenoir)
• [PATCH 0/2] Patches for supporting ALSA UCM
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• PulseAudio shared memory files
  • From: brian.cameron@xxxxxxxxxx (Brian Cameron)
• [PATCH 6/6] Alsa: add card ports and path probe cache
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 3/6] Cards now has ports directly, and device port has list of profiles
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 5/6] cli: Show card ports and jack detection status
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 4/6] Notify port available status changes
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 3/6] Cards now has ports directly, and device port has list of profiles
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/6] Turn device ports into reference counted objects
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/6] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 0/2] Patches for supporting ALSA UCM
  • From: jankovac503@xxxxxxxxx (Janos Kovacs)
• [PATCH v4 1/7] bluetooth: Fix Media Endpoint for HandsfreeGateway
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] profile-switcher: New module to switch card profiles based on roles
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 0/2] Patches for supporting ALSA UCM
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 0/2] Patches for supporting ALSA UCM
  • From: jaska.uimonen@xxxxxxxxxxx (Jaska Uimonen)
• [PATCH] profile-switcher: New module to switch card profiles based on roles
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• [PATCH 2/2] chnages in pulseaudio alsa module to support UCM
  • From: jankovac503@xxxxxxxxx (jankovac503@xxxxxxxxx)
• [PATCH 1/2] new files for ALSA UCM support
  • From: jankovac503@xxxxxxxxx (jankovac503@xxxxxxxxx)
• [PATCH 0/2] Patches for supporting ALSA UCM
  • From: jankovac503@xxxxxxxxx (jankovac503@xxxxxxxxx)
• [PATCH 8/8] Improve performance of peaks resampler
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 7/8] Rework the peaks resampler
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 6/8] oss: Use log2 function from core-util instead of own implementation
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 5/8] Squash unused variable compiler warning
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 4/8] Avoid some compiler warnings when cross-compiling for mingw32
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 3/8] Remove vector.h and vector-test
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 2/8] build-sys: Remove check for alloca()
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 1/8] build-sys: Use configure cache by default in bootstrap
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Some various patches
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] Remove time-smoother and shm from libpulsecore
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] rtpoll: Update comment
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• PulseAudio shared memory files
  • From: brian.cameron@xxxxxxxxxx (Brian Cameron)
• [PATCH v4 1/7] bluetooth: Fix Media Endpoint for HandsfreeGateway
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Revised patch set for `make check`
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH v2] sink, source: Join two ifs with the same condition.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] When BT profile is changed, bt transport is released
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• [PATCH v4 1/7] bluetooth: Fix Media Endpoint for HandsfreeGateway
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH] When BT profile is changed, bt transport is released
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH] When BT profile is changed, bt transport is released
  • From: chanyeol.park@xxxxxxxxxxx (Chan-yeol Park)
• [PATCH] profile-switcher: New module to switch card profiles based on roles
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• mic is seen by pulse but won't take in signals
  • From: hometheater@xxxxxxxxxxxxxxx ("Bearcat M. Şandor")
• [PATCH] profile-switcher: New module to switch card profiles based on roles
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• [PATCH] profile-switcher: New module to switch card profiles based on roles
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] profile-switcher: New module to switch card profiles based on roles
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• (no subject)
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• (no subject)
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• (no subject)
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• [PATCH] profile-switcher: New module to switch card profiles based on roles
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• PulseAudio Xen module
  • From: konrad.wilk@xxxxxxxxxx (Konrad Rzeszutek Wilk)
• [PATCH] profile-switcher: New module to switch card profiles based on roles
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] profile-switcher: New module to switch card profiles based on roles
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• [PATCH] profile-switcher: New module to switch card profiles based on roles
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• (no subject)
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] profile-switcher: New module to switch card profiles based on roles
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Why PA does not show me sinks for surround audio output?
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• "Unable to create stream: Connection terminated" happening relatively frequently in ubuntu 11.10
  • From: dank@xxxxxxxxx (Dan Kegel)
• "Unable to create stream: Connection terminated" happening relatively frequently in ubuntu 11.10
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• No subject
  • From: bogus@xxxxxxxxxxxxxxxxxx ()
• "Unable to create stream: Connection terminated" happening relatively frequently in ubuntu 11.10
  • From: dank@xxxxxxxxx (Dan Kegel)
• "Unable to create stream: Connection terminated" happening relatively frequently in ubuntu 11.10
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• PulseAudio Xen module
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Why PA does not show me sinks for surround audio output?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• PulseAudio Xen module
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• PulseAudio Xen module
  • From: gboutsioukis@xxxxxxxxx (George Boutsioukis)
• [PATCH v2] sink, source: Join two ifs with the same condition.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• PulseAudio Xen module
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• PulseAudio Xen module
  • From: gboutsioukis@xxxxxxxxx (George Boutsioukis)
• Why PA does not show me sinks for surround audio output?
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Why PA does not show me sinks for surround audio output?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• Why PA does not show me sinks for surround audio output?
  • From: jan.steffens@xxxxxxxxx (Jan Steffens)
• Why PA does not show me sinks for surround audio output?
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Why PA does not show me sinks for surround audio output?
  • From: mengdong.lin@xxxxxxxxx (Lin, Mengdong)
• [PATCH 5/6] cli: Show card ports and jack detection status
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• old module-loopback, without source= and sync=
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH 4/6] tests: Rename voltest to volume-test
  • From: wangxingchao2011@xxxxxxxxx (Wang Xingchao)
• [PATCH 4/6] tests: Rename voltest to volume-test
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 4/6] tests: Rename voltest to volume-test
  • From: wangxingchao2011@xxxxxxxxx (Wang Xingchao)
• [PATCH 6/6] tests: Reduce time needed for a make check
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 5/6] tests: Revisit which tests to run with make check
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 4/6] tests: Rename voltest to volume-test
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 3/6] tests: More useful output of make check
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 2/6] tests: Make sure tests assert on failures and return error status
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 1/6] tests: refactor ipacl-test
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Revised patch set for `make check`
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 2/2] sbc: Reduce for-loop induced indentation in sbc_unpack_frame
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• "Unable to create stream: Connection terminated" happening relatively frequently in ubuntu 11.10
  • From: dank@xxxxxxxxx (Dan Kegel)
• "Unable to create stream: Connection terminated" happening relatively frequently in ubuntu 11.10
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Any way to get PA to wake up less when playing low latency?
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• Any way to get PA to wake up less when playing low latency?
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 5/6] cli: Show card ports and jack detection status
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH 6/6] Alsa: add card ports and path probe cache
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 5/6] cli: Show card ports and jack detection status
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 4/6] Notify port available status changes
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 3/6] Cards now has ports directly, and device port has list of profiles
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 2/6] Turn device ports into reference counted objects
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 1/6] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 0/6] Jack detection patches
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Pulseaudio Merges Speakers and Frontjack
  • From: phiphi@xxxxxxxxx (Philipp Gassmann)
• Pulseaudio Merges Speakers and Frontjack
  • From: msclrhd@xxxxxxxxxxxxxx (Reece Dunn)
• Pulseaudio Merges Speakers and Frontjack
  • From: phiphi@xxxxxxxxx (Philipp Gassmann)
• Pulseaudio Merges Speakers and Frontjack
  • From: msclrhd@xxxxxxxxxxxxxx (Reece Dunn)
• Pulseaudio Merges Speakers and Frontjack
  • From: phiphi@xxxxxxxxx (Philipp Gassmann)
• raop module and audio data port
  • From: pujos.michael@xxxxxxxxxxx (Michael Pujos)
• [PATCH] alsa: Set return code before printing it.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• old module-loopback, without source= and sync=
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] alsa: Set return code before printing it.
  • From: dgreid@xxxxxxxxxxxx (Dylan Reid)
• old module-loopback, without source= and sync=
  • From: rjhenwood@xxxxxxxxxxx (Richard Henwood)
• Any way to get PA to wake up less when playing low latency?
  • From: dgreid@xxxxxxxxxxxx (Dylan Reid)
• Any way to get PA to wake up less when playing low latency?
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• Any way to get PA to wake up less when playing low latency?
  • From: dgreid@xxxxxxxxxxxx (Dylan Reid)
• Pulseaudio line-in and mic settings.
  • From: luca_dgh@xxxxxxxx (Luca Della Ghezza)
• Pulseaudio line-in and mic settings.
  • From: kc2rgw@xxxxxxxxx (Chris)
• Pulseaudio line-in and mic settings.
  • From: luca_dgh@xxxxxxxx (Luca Della Ghezza)
• Pulseaudio line-in and mic settings.
  • From: kc2rgw@xxxxxxxxx (Chris)
• Pulseaudio line-in and mic settings.
  • From: luca_dgh@xxxxxxxx (Luca Della Ghezza)
• python binding
  • From: pekingmaster@xxxxxxxxx (zw g)
• Any way to get PA to wake up less when playing low latency?
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• python binding
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• python binding
  • From: pekingmaster@xxxxxxxxx (zw g)
• [RFC] Exposing ports and profiles to clients
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Any way to get PA to wake up less when playing low latency?
  • From: dgreid@xxxxxxxxxxxx (Dylan Reid)
• [PATCH] alsa-mixer: Take channel mask of volume element into account when finding a subset path
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [RFC] Exposing ports and profiles to clients
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [RFC] Exposing ports and profiles to clients
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Latency module-null-sink
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• "Unable to create stream: Connection terminated" happening relatively frequently in ubuntu 11.10
  • From: dank@xxxxxxxxx (Dan Kegel)
• Getting a null sink to show up as an ALSA device.
  • From: kc2rgw@xxxxxxxxx (Chris)
• Latency module-null-sink
  • From: fernandochucre@xxxxxxxxx (Fernando Chucre)
• SOLVED: streaming pa with oggenc/sighttpd
  • From: rjhenwood@xxxxxxxxxxx (Richard Henwood)
• Getting a null sink to show up as an ALSA device.
  • From: kc2rgw@xxxxxxxxx (Chris)
• [PATCH] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [ANNOUNCE] PulseAudio 1.1
  • From: colin@xxxxxxxxxx (Colin Guthrie)
• [PATCH] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 2/2] sbc: Reduce for-loop induced indentation in sbc_unpack_frame
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH 1/2] sbc: overflow bugfix and audio decoding quality improvement
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [RFC PATCH] softvolume: implement fast volume translation
  • From: wangxingchao2011@xxxxxxxxx (Wang Xingchao)
• [RFC PATCH] softvolume: implement fast volume translation
  • From: wangxingchao2011@xxxxxxxxx (Wang Xingchao)
• Pulse and audio settings
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Pulse and audio settings
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Getting a null sink to show up as an ALSA device.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [RFC PATCH] softvolume: implement fast volume translation
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [RFC PATCH] softvolume: implement fast volume translation
  • From: wangxingchao2011@xxxxxxxxx (Wang Xingchao)
• [RFC PATCH] softvolume: implement fast volume translation
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [RFC PATCH] softvolume: implement fast volume translation
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] fix two warnings in utils/padsp.c
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] Remove time-smoother and shm from libpulsecore
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] alsa-card: Handle the "profile" modarg.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] alsa-card: Handle the "profile" modarg.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Getting a null sink to show up as an ALSA device.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Pulse and audio settings
  • From: orschiro@xxxxxxxxxxxxxx (Robert Orzanna)
• [RFC PATCH] softvolume: implement fast volume translation
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [RFC PATCH] softvolume: implement fast volume translation
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] Remove time-smoother and shm from libpulsecore
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Alternate sample rates
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] alsa-card: Handle the "profile" modarg.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] fix two warnings in utils/padsp.c
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Fade-In/Fade-Out Effect
  • From: ysharma@xxxxxxxxxxxxxx (Yogesh Sharma)
• Getting a null sink to show up as an ALSA device.
  • From: kc2rgw@xxxxxxxxx (Chris)
• [PATCH] osx: module_bonjour_publish needs to be linked against libprotocol-native.la
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Pulse and audio settings
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• PulseAudio support on Solaris
  • From: brian.cameron@xxxxxxxxxx (Brian Cameron)
• [PATCH] alsa-mixer: Take channel mask of volume element into account when finding a subset path
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• PulseAudio support on Solaris
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] alsa-mixer: Take channel mask of volume element into account when finding a subset path
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] alsa-mixer: Take channel mask of volume element into account when finding a subset path
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• PulseAudio support on Solaris
  • From: brian.cameron@xxxxxxxxxx (Brian Cameron)
• PulseAudio support on Solaris
  • From: brian.cameron@xxxxxxxxxx (Brian Cameron)
• [RFC PATCH] softvolume: implement fast volume translation
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• PulseAudio support on Solaris
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] Remove time-smoother and shm from libpulsecore
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [PATCH] core: New hook: PA_CORE_HOOK_CARD_PROFILE_ABOUT_TO_ACTIVATE.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] core: New hook: PA_CORE_HOOK_CARD_PROFILE_ABOUT_TO_ACTIVATE.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] core: New hook: PA_CORE_HOOK_CARD_PROFILE_ABOUT_TO_ACTIVATE.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] core: New hook: PA_CORE_HOOK_CARD_PROFILE_ABOUT_TO_ACTIVATE.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• New hook for card profile changes
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Bluetooth Audio Handling IRC Meeting
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] core: New hook: PA_CORE_HOOK_CARD_PROFILE_ABOUT_TO_ACTIVATE.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [RFC PATCH] softvolume: implement fast volume translation
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [RFC PATCH] softvolume: implement fast volume translation
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• Pulse and audio settings
  • From: mkbosmans@xxxxxxxxx (Maarten Bosmans)
• [RFC PATCH] softvolume: implement fast volume translation
  • From: guanqun.lu@xxxxxxxxx (Lu Guanqun)
• Alternate sample rates
  • From: wangxingchao2011@xxxxxxxxx (Wang Xingchao)
• [RFC PATCH] softvolume: implement fast volume translation
  • From: wangxingchao2011@xxxxxxxxx (Wang Xingchao)
• [PATCH] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Pulse and audio settings
  • From: orschiro@xxxxxxxxxxxxxx (Robert Orzanna)
• [PATCH] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• [RFC PATCH] softvolume: implement fast volume translation
  • From: xingchao.wang@xxxxxxxxx (Wang Xingchao)
• [PATCH] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• [PATCH] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] Introduce "available" concept for ports, and communicate that to clients. Bump protocol version to 24.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Alternate sample rates
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• Front panel (headphone) output not working
  • From: lassi.vaatamoinen@xxxxxx (Lassi Väätämöinen)
• [PATCH] core: New hook: PA_CORE_HOOK_CARD_PROFILE_ABOUT_TO_ACTIVATE.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• Screen casting with PulseAudio
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Bluetooth Audio Handling IRC Meeting
  • From: wagi@xxxxxxxxx (Daniel Wagner)
• Screen casting with PulseAudio
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• Screen casting with PulseAudio
  • From: michal@xxxxxxxxxx (Michał Sawicz)
• Screen casting with PulseAudio
  • From: michal@xxxxxxxxxx (Michał Sawicz)
• Screen casting with PulseAudio
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Screen casting with PulseAudio
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• Screen casting with PulseAudio
  • From: michal@xxxxxxxxxx (Michał Sawicz)
• Screen casting with PulseAudio
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• Screen casting with PulseAudio
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• Screen casting with PulseAudio
  • From: michal@xxxxxxxxxx (Michał Sawicz)
• Screen casting with PulseAudio
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• New hook for card profile changes
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)