Linux for MIPS
[Prev Page][Next Page]
- Re: Support /proc/kcore for MIPS
- From: Martin Michlmayr <tbm@xxxxxxxxxx>
- Re: make meth eht0 on IP32
- From: Martin Michlmayr <tbm@xxxxxxxxxx>
- Re: [PATCH] Fix serial console detection
- From: Martin Michlmayr <tbm@xxxxxxxxxx>
- Re: [patch 1/5] SiByte fixes for 2.6.12
- From: Martin Michlmayr <tbm@xxxxxxxxxx>
- Re: [PATCH Cobalt 1/1] 64-bit fix
- From: Martin Michlmayr <tbm@xxxxxxxxxx>
- Timer Interrupt
- From: Bharathi Subramanian <sbharathi@xxxxxxxxxxxxx>
- Re: Can I use this kind of performance counters to implement oProfile?
- From: Fuxin Zhang <fxzhang@xxxxxxxxx>
- RE: how to emdedded ramdisk.gz in vmlinux for linux-2.6.14?
- From: "Marc Karasek" <marck@xxxxxxxxxxx>
- Re: Réf. : does the linux kernel use k0, k1 regs?
- From: "Kevin D. Kissell" <kevink@xxxxxxxx>
- gcc -3.4.4 and linux-2.4.32
- From: Kishore K <hellokishore@xxxxxxxxx>
- Re: Setting gp on pic code
- From: Brett Foster <fosterb@xxxxxxxxxxx>
- Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0)
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- Re: Réf. : does the linux kernel use k0, k1 regs?
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- Setting gp on pic code
- From: Alex Gonzalez <langabe@xxxxxxxxx>
- Can I use this kind of performance counters to implement oProfile?
- From: "colin" <colin@xxxxxxxxxxxxxx>
- Réf. : does the linux kernel use k0, k1 regs?
- From: Florian DELIZY <florian.delizy@xxxxxxxxx>
- Re: [PATCH] PNX8550 NAND flash driver
- From: Todd Poynor <tpoynor@xxxxxxxxxx>
- Arcload Ext2FS patch
- From: Shuveb Hussain <shuveb@xxxxxxxxx>
- how to emdedded ramdisk.gz in vmlinux for linux-2.6.14?
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- Re: Compiling a non-pic glibc
- From: Daniel Jacobowitz <dan@xxxxxxxxxx>
- Re: How to apply 2.6.15-git7 patchset ?
- From: "P. Christeas" <p_christ@xxxxxx>
- [2.6 patch] Remove arch/mips/arc/salone.c
- From: Adrian Bunk <bunk@xxxxxxxxx>
- [PATCH] EHCI support for the AU1200
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- Re: [linux-usb-devel] [PATCH] UDC support for MIPS/AU1200 and Geode/CS5536
- From: "Thomas Dahlmann" <thomas.dahlmann@xxxxxxx>
- How to apply 2.6.15-git7 patchset ?
- From: Ivan Korzakow <ivan.korzakow@xxxxxxxxx>
- does not the kernel support embedded ramdisk too larget?
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- does the linux kernel use k0, k1 regs?
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- Re: QEMU and kernel 2.6.15
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: QEMU and kernel 2.6.15
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Compiling a non-pic glibc
- From: Alex Gonzalez <langabe@xxxxxxxxx>
- Re: QEMU and kernel 2.6.15
- From: Daniel Jacobowitz <dan@xxxxxxxxxx>
- au1200 mae mmap problem
- From: yzzhang@xxxxxxxxxxxxx
- au1200 mae mmap problem
- From: yzzhang@xxxxxxxxxxxxx
- au1200 mae mmap problem
- From: yzzhang@xxxxxxxxxxxxx
- Re: why the early_initcall(au1x00_setup) do not work?
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: why the early_initcall(au1x00_setup) do not work?
- From: Ivan Korzakow <ivan.korzakow@xxxxxxxxx>
- Re: why the early_initcall(au1x00_setup) do not work?
- From: Ivan Korzakow <ivan.korzakow@xxxxxxxxx>
- Re: why the early_initcall(au1x00_setup) do not work?
- From: Ivan Korzakow <ivan.korzakow@xxxxxxxxx>
- Re: QEMU and kernel 2.6.15
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: QEMU and kernel 2.6.15
- From: Daniel Jacobowitz <dan@xxxxxxxxxx>
- Re: why the early_initcall(au1x00_setup) do not work?
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: why the early_initcall(au1x00_setup) do not work?
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: why the early_initcall(au1x00_setup) do not work?
- From: Ivan Korzakow <ivan.korzakow@xxxxxxxxx>
- Re: why the early_initcall(au1x00_setup) do not work?
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: why the early_initcall(au1x00_setup) do not work?
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- Re: why the early_initcall(au1x00_setup) do not work?
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: why the early_initcall(au1x00_setup) do not work?
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- Re: why the early_initcall(au1x00_setup) do not work?
- From: Ivan Korzakow <ivan.korzakow@xxxxxxxxx>
- Re: why the early_initcall(au1x00_setup) do not work?
- From: "P. Christeas" <p_christ@xxxxxx>
- Re: why the early_initcall(au1x00_setup) do not work?
- From: Ivan Korzakow <ivan.korzakow@xxxxxxxxx>
- Re: why the early_initcall(au1x00_setup) do not work?
- From: "P. Christeas" <p_christ@xxxxxx>
- Re: QEMU and kernel 2.6.15
- From: "P. Christeas" <p_christ@xxxxxx>
- [ADMIN] linux-mips.org moving ...
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: QEMU and kernel 2.6.15
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: why the early_initcall(au1x00_setup) do not work?
- From: Ivan Korzakow <ivan.korzakow@xxxxxxxxx>
- QEMU and kernel 2.6.15
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: why the early_initcall(au1x00_setup) do not work?
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: [linux-usb-devel] [PATCH] UDC support for MIPS/AU1200 and Geode/CS5536
- From: David Vrabel <dvrabel@xxxxxxxxxx>
- Re: [linux-usb-devel] [PATCH] UDC support for MIPS/AU1200 and Geode/CS5536
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [linux-usb-devel] [PATCH] UDC support for MIPS/AU1200 and Geode/CS5536
- From: "Thomas Dahlmann" <thomas.dahlmann@xxxxxxx>
- [PATCH] IrDA support for au1000/au1100
- From: Rodolfo Giometti <giometti@xxxxxxxx>
- RE: [processor frequency]
- From: Dominic Sweetman <dom@xxxxxxxx>
- how to make zImage in linux 2.6?
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- Re: why the early_initcall(au1x00_setup) do not work?
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- Re: [processor frequency]
- From: Wolfgang Denk <wd@xxxxxxx>
- Re: [processor frequency]
- From: Wolfgang Denk <wd@xxxxxxx>
- Re: [linux-usb-devel] [PATCH] UDC support for MIPS/AU1200 and Geode/CS5536
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- RE: [processor frequency]
- From: "Mitchell, Earl" <earlm@xxxxxxxx>
- Re: [processor frequency]
- From: "Kevin D. Kissell" <kevink@xxxxxxxx>
- Re: [processor frequency]
- From: Wolfgang Denk <wd@xxxxxxx>
- [PATCH] Cleanups for au1000/common/time.c
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- Re: UDC support for MIPS/AU1200 and Geode/CS5536
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- Re: ALCHEMY: Add SD support to AU1200 MMC/SD driver
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- [PATCH] UDC support for MIPS/AU1200 and Geode/CS5536
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- Re: ALCHEMY: Add SD support to AU1200 MMC/SD driver
- From: Rodolfo Giometti <giometti@xxxxxxxx>
- Re: Force MMC/SD to 512 byte block sizes
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- Re: LL and SC instruction simulation
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: LL and SC instruction simulation
- From: "Kevin D. Kissell" <kevink@xxxxxxxx>
- Re: LL and SC instruction simulation
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: why the early_initcall(au1x00_setup) do not work?
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: LL and SC instruction simulation
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: why the early_initcall(au1x00_setup) do not work?
- From: "P. Christeas" <p_christ@xxxxxx>
- Re: LL and SC instruction simulation
- From: "Kevin D. Kissell" <kevink@xxxxxxxx>
- Re: why the early_initcall(au1x00_setup) do not work?
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: LL and SC instruction simulation
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re:
- From: "Kevin D. Kissell" <kevink@xxxxxxxx>
- LL and SC instruction simulation
- From: "Sathesh Babu Edara" <satheshbabu.edara@xxxxxxxxxx>
- RE:
- From: "Sathesh Babu Edara" <satheshbabu.edara@xxxxxxxxxx>
- why the early_initcall(au1x00_setup) do not work?
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- LL and SC instruction simulation
- From: "Sathesh Babu Edara" <satheshbabu.edara@xxxxxxxxxx>
- LL and SC instruction simulation
- From: "Sathesh Babu Edara" <satheshbabu.edara@xxxxxxxxxx>
- Re: sometimes get "crc error" while uncompressed ramdisk
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- [2.6 patch] mips/s390: remove -finline-limit=10000{,0}
- From: Adrian Bunk <bunk@xxxxxxxxx>
- Re: Jump/branch to external symbol
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: Almost 80% of UDP packets dropped
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: Almost 80% of UDP packets dropped
- From: "Kevin D. Kissell" <KevinK@xxxxxxxx>
- Re: Almost 80% of UDP packets dropped
- From: Brett Foster <fosterb@xxxxxxxxxxx>
- Almost 80% of UDP packets dropped
- From: kernel coder <lhrkernelcoder@xxxxxxxxx>
- Re: sometimes get "crc error" while uncompressed ramdisk
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- Re: Force MMC/SD to 512 byte block sizes
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- Re: Jump/branch to external symbol
- From: Alex Gonzalez <linux-mips@xxxxxxxxxxxxxxxx>
- Re: Force MMC/SD to 512 byte block sizes
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- Re: [PATCH] Force MMC/SD to 512 byte block sizes
- From: Russell King <rmk@xxxxxxxxxxxxxxxx>
- Re: [PATCH] Force MMC/SD to 512 byte block sizes
- From: Pierre Ossman <drzeus@xxxxxxxxx>
- [PATCH] Force MMC/SD to 512 byte block sizes
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- [PATCH] Make KGDB compile again
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- [PATCH] Make KGDB compile for AMD Au1200
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: diet-X11 fails /include/bits/types.h
- From: Robert Woerle <robert@xxxxxxxxxxxxxxxxxxx>
- Re: Jump/branch to external symbol
- From: Daniel Jacobowitz <dan@xxxxxxxxxx>
- Re: Jump/branch to external symbol
- From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
- Jump/branch to external symbol
- From: Alex Gonzalez <langabe@xxxxxxxxx>
- Re: sometimes get "crc error" while uncompressed ramdisk
- From: jp <jaypee@xxxxxxxxxx>
- sometimes get "crc error" while uncompressed ramdisk
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- diet-X11 fails /include/bits/types.h
- From: Robert Woerle <robert@xxxxxxxxxxxxxxxxxxx>
- [2.6 patch] Remove arch/mips/arc/salone.c
- From: Adrian Bunk <bunk@xxxxxxxxx>
- iptables/vmalloc issues on alchemy (revisited)
- From: "Christi Garvin" <christi.garvin@xxxxxxxxxxxxx>
- Re: [PATCH] serial_txx9: forcibly init the spinlock for PCI UART used as a console
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- ALCHEMY: AU1200 USB Host Controller (OHCI/EHCI) PROGRESS
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Re: smc91x support
- From: Pete Popov <ppopov@xxxxxxxxxxxxxxxxx>
- Re: smc91x support
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Subscribing
- From: Rizvan <rizzkhan@xxxxxxxxx>
- Re: ALCHEMY: AU1200 USB Host Controller (OHCI/EHCI)
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Re: ALCHEMY: AU1200 USB Host Controller (OHCI/EHCI)
- From: bora.sahin@xxxxxxxxxxxx
- Re: ALCHEMY: AU1200 USB Host Controller (OHCI/EHCI)
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- [no subject]
- From: "Sathesh Babu Edara" <satheshbabu.edara@xxxxxxxxxx>
- Re:
- From: "Kevin D. Kissell" <kevink@xxxxxxxx>
- Re: ALCHEMY: AU1200 USB Host Controller (OHCI/EHCI)
- From: "Matthias Lenk" <matthias.lenk@xxxxxxx>
- Re: ALCHEMY: AU1200 USB Host Controller (OHCI/EHCI)
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Re: ALCHEMY: AU1200 USB Host Controller (OHCI/EHCI)
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Re: ALCHEMY: AU1200 USB Host Controller (OHCI/EHCI)
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Re: ALCHEMY: AU1200 USB Host Controller (OHCI/EHCI)
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- Re: ALCHEMY: AU1200 USB Host Controller (OHCI/EHCI)
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Re: ieee754[sd]p_neg workaround
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: Au1xx0: replace casual readl() with au_readl() in the drivers
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- [PATCH] Au1xx0: replace casual readl() with au_readl() in the drivers
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: Fixed kernel entry point suggestion
- From: Thiemo Seufer <ths@xxxxxxxxxxxx>
- Re: [PATCH] AMD Au1xx0 serial: claim the memory resource
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: [PATCH] AMD Au1xx0 serial: claim the memory resource
- From: Pete Popov <ppopov@xxxxxxxxxxxxxxxxx>
- [PATCH] AMD Au1xx0 serial: claim the memory resource
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: Fixed kernel entry point suggestion
- From: Adil Hafeez <adilhafeez80@xxxxxxxxx>
- Watchdog support on Broadcomm MIPS chips
- From: David Goodenough <david.goodenough@xxxxxxxxxxxxx>
- Re: Fixed kernel entry point suggestion
- From: Thiemo Seufer <ths@xxxxxxxxxxxx>
- Re: Fixed kernel entry point suggestion
- From: Adil Hafeez <adilhafeez80@xxxxxxxxx>
- Re: [PATCH] serial_txx9: forcibly init the spinlock for PCI UART used as a console
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: [PATCH] Retain the write-only OD from being clobbered
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: Fixed kernel entry point suggestion
- From: Dan Malek <dan@xxxxxxxxxxxxxxxxx>
- Fixed kernel entry point suggestion
- From: Adil Hafeez <adilhafeez80@xxxxxxxxx>
- Re: [PATCH] serial_txx9: forcibly init the spinlock for PCI UART used as a console
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: [PATCH] serial_txx9: forcibly init the spinlock for PCI UART used as a console
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- Re: [PATCH] serial_txx9: forcibly init the spinlock for PCI UART used as a console
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: [PATCH] serial_txx9: forcibly init the spinlock for PCI UART used as a console
- From: Russell King <rmk@xxxxxxxxxxxxxxxx>
- Re: [PATCH] serial_txx9: forcibly init the spinlock for PCI UART used as a console
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: [PATCH] serial_txx9: forcibly init the spinlock for PCI UART used as a console
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: [PATCH] serial_txx9: forcibly init the spinlock for PCI UART used as a console
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- implicit declaration of function `BUILD_BUG'
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- Re: [PATCH] serial_txx9: forcibly init the spinlock for PCI UART used as a console
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- [PATCH] serial_txx9: forcibly init the spinlock for PCI UART used as a console
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: USB on AU1550
- From: Herbert Valerio Riedel <hvr@xxxxxxx>
- IP28 patches
- From: peter fuerst <pf@xxxxxxxxxxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: "Stephen P. Becker" <geoman@xxxxxxxxxx>
- Re: Kernel freezes in r4k_flush_icache_range() with CONFIG_CPU_MIPS32_R2
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: IDE subsystem
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: IDE subsystem
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- IDE subsystem
- From: kernel coder <lhrkernelcoder@xxxxxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: Jan-Benedict Glaw <jbglaw@xxxxxxxxxx>
- Re: Preempted interrupt handler
- From: Yoann Allain <yallain@xxxxxxxxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- Re: Kernel freezes in r4k_flush_icache_range() with CONFIG_CPU_MIPS32_R2
- From: Maxime Bizon <mbizon@xxxxxxxxxx>
- Re: [PATCH] fix local_irq_save()/local_irq_restore() when CONFIG_CPU_MIPSR2 & CONFIG_IRQ_CPU
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: Preempted interrupt handler
- From: Fuxin Zhang <fxzhang@xxxxxxxxx>
- Port of RB532
- From: "P. Christeas" <p_christ@xxxxxx>
- Re: Preempted interrupt handler
- From: "Steven J. Hill" <sjhill@xxxxxxxxxxxxxxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: Jan-Benedict Glaw <jbglaw@xxxxxxxxxx>
- Re: Preempted interrupt handler
- From: Srinivas Kommu <kommu@xxxxxxxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: "P. Christeas" <p_christ@xxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: Jan-Benedict Glaw <jbglaw@xxxxxxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: "Kevin D. Kissell" <kevink@xxxxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: Jan-Benedict Glaw <jbglaw@xxxxxxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: Jan-Benedict Glaw <jbglaw@xxxxxxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: Pete Popov <ppopov@xxxxxxxxxxxxxxxxx>
- does someone succeed in making the toolchain for 2.6 kernel?
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- Re: does someone succeed in making the toolchain for 2.6 kernel?
- From: Jan-Benedict Glaw <jbglaw@xxxxxxxxxx>
- [Fwd: Re: [PATCH] PNX8550 NAND flash driver]
- From: "Vladimir A. Barinov" <vbarinov@xxxxxxxxxxxxx>
- Re: [PATCH] PNX8550 NAND flash driver
- From: "Vladimir A. Barinov" <vbarinov@xxxxxxxxxxxxx>
- Re: Preempted interrupt handler
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: Kernel freezes in r4k_flush_icache_range() with CONFIG_CPU_MIPS32_R2
- From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
- Re: [PATCH] fix local_irq_save()/local_irq_restore() when CONFIG_CPU_MIPSR2 & CONFIG_IRQ_CPU
- From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
- [PATCH] fix local_irq_save()/local_irq_restore() when CONFIG_CPU_MIPSR2 & CONFIG_IRQ_CPU
- From: Maxime Bizon <mbizon@xxxxxxxxxx>
- Kernel freezes in r4k_flush_icache_range() with CONFIG_CPU_MIPS32_R2
- From: Maxime Bizon <mbizon@xxxxxxxxxx>
- Preempted interrupt handler
- From: Yoann Allain <yallain@xxxxxxxxxxxx>
- Q: where does cmdline come from in 2.6?
- From: "P. Christeas" <p_christ@xxxxxx>
- Re: Build error: undefined reference to `__ashrdi3'
- From: "P. Christeas" <p_christ@xxxxxx>
- Re: 2.4.22 Kernel Build Error
- From: Øyvind Kristiansen <oyvind.kristiansen@xxxxxxxxxx> (by way of Øyvind Kristiansen <oyvind.kristiansen@xxxxxxxxxx>)
- Re: 2.4.22 Kernel Build Error
- From: Shireesh Annam <annamshr@xxxxxxxxx>
- Build error: undefined reference to `__ashrdi3'
- From: "P. Christeas" <p_christ@xxxxxx>
- Patch for 1125 PCI support
- From: "Mark Mason" <mason@xxxxxxxxxxxx>
- [PATCH] PNX8550 NAND flash driver
- From: "Vladimir A. Barinov" <vbarinov@xxxxxxxxxxxxx>
- Re: Timer interrupts
- From: Dominic Sweetman <dom@xxxxxxxx>
- Re: Freezing & Unfreezing the au11000
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: Irda support for au1100
- From: Pete Popov <ppopov@xxxxxxxxxxxxxxxxx>
- Irda support for au1100
- From: Rodolfo Giometti <giometti@xxxxxxxx>
- Freezing & Unfreezing the au11000
- From: Rodolfo Giometti <giometti@xxxxxxxx>
- Timer interrupts
- Re: 2.4.22 Kernel Build Error
- From: Shireesh Annam <annamshr@xxxxxxxxx>
- Re: Au1200 & IDE
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: 2.4.22 Kernel Build Error
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- 2.4.22 Kernel Build Error
- From: Shireesh Annam <annamshr@xxxxxxxxx>
- Re: Au1200 & IDE
- From: bora.sahin@xxxxxxxxxxxx
- Re: Au1200 & IDE
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- Au1200 & IDE
- From: bora.sahin@xxxxxxxxxxxx
- Re: ALCHEMY: Add SD support to AU1200 MMC/SD driver
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- Re: [PATCH] ALCHEMY: Add SD support to AU1200 MMC/SD driver
- From: Rodolfo Giometti <giometti@xxxxxxxx>
- Re: Réf. : Re: To put Linux kernel as closer as possible to 0x80000000
- From: Thiemo Seufer <ths@xxxxxxxxxxxx>
- Réf. : Re: Réf. : Re: To put Linux kernel as closer as possible to 0x80000000
- From: Florian DELIZY <florian.delizy@xxxxxxxxx>
- ENDEC ports and MII interface
- From: kernel coder <lhrkernelcoder@xxxxxxxxx>
- Re: Réf. : Re: To put Linux kernel as closer as possible to 0x80000000
- From: "colin" <colin@xxxxxxxxxxxxxx>
- Réf. : Re: To put Linux kernel as closer as possible to 0x80000000
- From: Florian DELIZY <florian.delizy@xxxxxxxxx>
- Re: To put Linux kernel as closer as possible to 0x80000000
- From: Yoichi Yuasa <yyuasa@xxxxxxxxx>
- To put Linux kernel as closer as possible to 0x80000000
- From: "colin" <colin@xxxxxxxxxxxxxx>
- Re: mprotect(PROT_NONE) doesn't prevent reading/writing on 2.6.14 Au1550
- From: Pete Popov <ppopov@xxxxxxxxxxxxxxxxx>
- mprotect(PROT_NONE) doesn't prevent reading/writing on 2.6.14 Au1550
- From: Clem Taylor <clem.taylor@xxxxxxxxx>
- Re: advice on JTAG
- From: "Ed Okerson" <ed@xxxxxxxxxxx>
- Re: advice on JTAG
- From: Wolfgang Denk <wd@xxxxxxx>
- advice on JTAG
- From: Rodolfo Giometti <giometti@xxxxxxxx>
- Re: ALCHEMY: AU1200 USB Host Controller (OHCI/EHCI)
- From: Bora Sahin <bora.sahin@xxxxxxxxxxxx>
- generic read_trylock() never tries, it always waits
- From: Keith Owens <kaos@xxxxxxx>
- Re: [PATCH] SiMotion VoyagerGX framebuffer: blue stripped background
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: SGI IP28 Kernels... anyone had any luck lately?
- From: Stuart Longland <redhatter@xxxxxxxxxx>
- Re: [linux-usb-devel] ALCHEMY: AU1200 USB Host Controller (OHCI/EHCI)
- From: Pete Popov <ppopov@xxxxxxxxxxxxxxxxx>
- Re: [linux-usb-devel] ALCHEMY: AU1200 USB Host Controller (OHCI/EHCI)
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [PATCH] Philips PNX8550 USB Host driver compile fix
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: SGI O2: working framebuffer/X11 modes?
- From: "Stephen P. Becker" <geoman@xxxxxxxxxx>
- Re: SGI O2: working framebuffer/X11 modes?
- From: Michael Joosten <michael.joosten@xxxxxxxx>
- Re: [PATCH] SiMotion VoyagerGX framebuffer: blue stripped background
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: SGI O2: working framebuffer/X11 modes?
- From: "Stephen P. Becker" <geoman@xxxxxxxxxx>
- SGI O2: working framebuffer/X11 modes?
- From: Michael Joosten <joost@xxxxxxxx>
- Re: SGI IP28 Kernels... anyone had any luck lately?
- From: peter fuerst <pf@xxxxxxxxxxxxxx>
- [PATCH] SiMotion VoyagerGX framebuffer: blue stripped background
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- SGI IP28 Kernels... anyone had any luck lately?
- From: Stuart Longland <redhatter@xxxxxxxxxx>
- ALCHEMY: AU1200 USB Host Controller (OHCI/EHCI)
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- Re: [Alsa-devel] Au1550 OSS driver issues
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: [PATCH] Enable DBAu1550 soft-off
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- [PATCH] Enable DBAu1550 soft-off
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- [PATCH] Simple patch to power off DBAU1200
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: [Alsa-devel] Au1550 OSS driver issues
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: [PATCH] Philips PNX8550
- From: "Vladimir A. Barinov" <vbarinov@xxxxxxxxxxxxx>
- [Fwd: Re: [PATCH] Philips PNX8550 command line patch]
- From: "Vladimir A. Barinov" <vbarinov@xxxxxxxxxxxxx>
- Re: [PATCH] Philips PNX8550 command line patch
- From: "Vladimir A. Barinov" <vbarinov@xxxxxxxxxxxxx>
- Re: [PATCH] Philips PNX8550 USB Host driver compile fix
- From: "Vladimir A. Barinov" <vbarinov@xxxxxxxxxxxxx>
- RE: pci_iomap issues?
- From: "Marc Karasek" <marck@xxxxxxxxxxx>
- can read/write to mprotect(PROT_NONE) region with 2.6.14 on au1550
- From: Clem Taylor <clem.taylor@xxxxxxxxx>
- Re: [PATCH] Philips PNX8550
- From: "Vladimir A. Barinov" <vbarinov@xxxxxxxxxxxxx>
- Re: [PATCH] Philips PNX8550
- From: "Vladimir A. Barinov" <vbarinov@xxxxxxxxxxxxx>
- Re: [PATCH] Philips PNX8550
- From: Peter Popov <ppopov@xxxxxxxxxxxxxxxxx>
- Re: [PATCH] Philips PNX8550
- From: "Vladimir A. Barinov" <vbarinov@xxxxxxxxxxxxx>
- Re: pci_iomap issues?
- From: Scott Ashcroft <scott.ashcroft@xxxxxxxxxx>
- List symbols from object files
- From: "Mile Davidovic" <Mile.Davidovic@xxxxxxxxxxxxxxx>
- Re: pci_iomap issues?
- From: "Mark Mason" <mason@xxxxxxxxxxxx>
- Re: [PATCH] Philips PNX8550
- From: Peter Popov <ppopov@xxxxxxxxxxxxxxxxx>
- [PATCH] Philips PNX8550
- From: "Vladimir A. Barinov" <vbarinov@xxxxxxxxxxxxx>
- Re: [PATCH] Philips PNX8550 USB Host driver compile fix
- From: Peter Popov <ppopov@xxxxxxxxxxxxxxxxx>
- Re: [PATCH] Philips PNX8550 command line patch
- From: Peter Popov <ppopov@xxxxxxxxxxxxxxxxx>
- [PATCH] Philips PNX8550 USB Host driver compile fix
- From: "Vladimir A. Barinov" <vbarinov@xxxxxxxxxxxxx>
- [PATCH] Philips PNX8550 USB Host driver compile fix
- From: "Vladimir A. Barinov" <vbarinov@xxxxxxxxxxxxx>
- Re: [PATCH] Philips PNX8550 command line patch
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: [PATCH] Philips PNX8550 ip3106 driver deadlock fix
- From: "Vladimir A. Barinov" <vbarinov@xxxxxxxxxxxxx>
- [PATCH] Philips PNX8550 command line patch
- From: "Vladimir A. Barinov" <vbarinov@xxxxxxxxxxxxx>
- Re: [PATCH] Philips PNX8550 ip3106 driver deadlock fix
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- DBAu1200 & Alchemy
- From: Bora Sahin <bora.sahin@xxxxxxxxxxxx>
- [PATCH] Philips PNX8550 ip3106 driver deadlock fix
- From: "Vladimir A. Barinov" <vbarinov@xxxxxxxxxxxxx>
- Re: zero copy
- From: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>
- zero copy
- From: kernel coder <lhrkernelcoder@xxxxxxxxx>
- Re: Linux on handheld
- From: Leonardo Silva Amaral <leonardosilv@xxxxxxxxxxxx>
- Re: Linux on handheld
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Au1550 SDRAM bus frequency & data corruption
- From: "David Sanchez" <david.sanchez@xxxxxxxxx>
- Re: pci_iomap issues?
- From: Jim Gifford <maillist@xxxxxxxxx>
- pci_iomap issues?
- From: Scott Ashcroft <scott.ashcroft@xxxxxxxxxx>
- RE: Au1550 system bus masters issue
- From: "David Sanchez" <david.sanchez@xxxxxxxxx>
- Re: ALCHEMY: SPI driver for Au1200
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- Linux on handheld
- From: Leonardo Silva Amaral <leonardosilv@xxxxxxxxxxxx>
- Re: ALCHEMY: Alchemy Camera Interface (CIM) driver
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- Re: [PATCH] fix mdelay(1) for 64bit kernel with HZ == 1000
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: Cobalt IDE Patch
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: Cobalt IDE Patch
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: Au1550 system bus masters issue
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: Tulip RaQ2 64 Bit Fix
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: [PATCH] ALCHEMY: SPI driver for Au1200
- From: Komal Shah <komal_shah802003@xxxxxxxxx>
- Re: Au1550 system bus masters issue
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: [PATCH] ALCHEMY: Alchemy Camera Interface (CIM) driver
- From: Komal Shah <komal_shah802003@xxxxxxxxx>
- Re: [PATCH] ALCHEMY: Alchemy Camera Interface (CIM) driver
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Au1550 system bus masters issue
- From: "David Sanchez" <david.sanchez@xxxxxxxxx>
- Re: Cobalt IDE Patch
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Cobalt IDE Patch
- From: Jim Gifford <maillist@xxxxxxxxx>
- Tulip RaQ2 64 Bit Fix
- From: Jim Gifford <maillist@xxxxxxxxx>
- Patch for RaQ2 - cpu features.h
- From: Jim Gifford <maillist@xxxxxxxxx>
- SOT: Looking for Free Software developers willing to give a talk at the Fosdem embedded devroom
- From: Philippe De Swert <Philippedeswert@xxxxxxxxxx>
- Re: ALCHEMY: Add SD support to AU1200 MMC/SD driver
- From: Pierre Ossman <drzeus@xxxxxxxxx>
- Re: ALCHEMY: Add SD support to AU1200 MMC/SD driver
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- Re: [PATCH] ALCHEMY: Add SD support to AU1200 MMC/SD driver
- From: Russell King <rmk@xxxxxxxxxxxxxxxx>
- Re: [PATCH] ALCHEMY: Add SD support to AU1200 MMC/SD driver
- From: Pierre Ossman <drzeus@xxxxxxxxx>
- [PATCH] ALCHEMY: Alchemy Camera Interface (CIM) driver
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- [PATCH] ALCHEMY: AU1200 I2C modifications
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- [PATCH] ALCHEMY: SPI driver for Au1200
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- [PATCH] ALCHEMY: Add SD support to AU1200 MMC/SD driver
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- Re: Re : where to set the BEV to normal of status in kernel source?
- From: "Kevin D. Kissell" <kevink@xxxxxxxx>
- Re : where to set the BEV to normal of status in kernel source?
- From: Florian DELIZY <florian.delizy@xxxxxxxxx>
- where to set the BEV to normal of status in kernel source?
- From: zhuzhenhua <zzh.hust@xxxxxxxxx>
- get an usleep() with less than 20ms on 2.4.27
- From: "Conil.Christophe" <Conil.Christophe@xxxxxxxxxxxxx>
- RE: DbAu1550 copy file corruption
- From: "David Sanchez" <david.sanchez@xxxxxxxxx>
- Re: MIPS no FP patch
- From: Chris Wedgwood <cw@xxxxxxxx>
- Re: DbAu1550 copy file corruption
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: DbAu1550 copy file corruption
- From: Dan Malek <dan@xxxxxxxxxxxxxxxxx>
- Re: Fix board type in db1x00
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- RE: DbAu1550 copy file corruption
- From: "David Sanchez" <david.sanchez@xxxxxxxxx>
- RE: DbAu1550 copy file corruption
- From: "David Sanchez" <david.sanchez@xxxxxxxxx>
- Re: MIPS no FP patch
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: [PATCH] Fix board type in db1x00
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- MIPS no FP patch
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- DbAu1550 copy file corruption
- From: "David Sanchez" <david.sanchez@xxxxxxxxx>
- [PATCH] Simple patch to power off DBAU1200
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Re: [PATCH] Fix board type in db1x00
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- [PATCH] fix mdelay(1) for 64bit kernel with HZ == 1000
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: [PATCH] Fix board type in db1x00
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- PIC/Cardbus on AU1200
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Generate SIGILL again
- From: Daniel Jacobowitz <dan@xxxxxxxxxx>
- Re: [PATCH] fix gdb-stub for kernel compiled with higher ISA level
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: [PATCH] fix gdb-stub for kernel compiled with higher ISA level
- From: Daniel Jacobowitz <dan@xxxxxxxxxx>
- [PATCH] Fix Au1550 OHCI memory map size
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- [PATCH] gdb-stub.c build fix
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- [PATCH] fix gdb-stub for kernel compiled with higher ISA level
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- RE: Saving arguments on the stack
- From: "Knittel, Brian" <Brian.Knittel@xxxxxxxxxxx>
- Re: [PATCH] Fix board type in db1x00
- From: Dan Malek <dan@xxxxxxxxxxxxxxxxx>
- Re: Saving arguments on the stack
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: [PATCH] Fix board type in db1x00
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Timer interrupt handler problem
- From: Co Ngai Fung <fung@xxxxxxxxx>
- Re: Fix board type in db1x00
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- Re: Fix board type in db1x00
- From: Dan Malek <dan@xxxxxxxxxxxxxxxxx>
- Re: Fix board type in db1x00
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- Re: [PATCH] Fix board type in db1x00
- From: Dan Malek <dan@xxxxxxxxxxxxxxxxx>
- [PATCH] Fix board type in db1x00
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- Re: [PATCH] Retain the write-only OD from being clobbered
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- [PATCH] Cleanups in au1000/common/time.c
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- [PATCH] Fix BSCR accesses
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- [PATCH] Retain the write-only OD from being clobbered
- From: "Jordan Crouse" <jordan.crouse@xxxxxxx>
- RE: Saving arguments on the stack
- From: "Knittel, Brian" <Brian.Knittel@xxxxxxxxxxx>
- Re: Saving arguments on the stack
- From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
- Re: Saving arguments on the stack
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: Saving arguments on the stack
- From: Dominic Sweetman <dom@xxxxxxxx>
- Re: Saving arguments on the stack
- From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
- Re: Saving arguments on the stack
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: Saving arguments on the stack
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: Saving arguments on the stack
- From: Nigel Stephens <nigel@xxxxxxxx>
- Re: Saving arguments on the stack
- From: "Kevin D. Kissell" <kevink@xxxxxxxx>
- Saving arguments on the stack
- From: "Knittel, Brian" <Brian.Knittel@xxxxxxxxxxx>
- [PATCH] parport: add parallel port support for SGI O2
- From: Arnaud Giersch <arnaud.giersch@xxxxxxx>
- mips iomap.c (Was: Re: MIPS - 64bit woes)
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: MIPS - 64bit woes
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: MIPS - 64bit woes
- From: Jim Gifford <maillist@xxxxxxxxx>
- Re: MIPS - 64bit woes
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: cpu_idle and cpu_wait
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: MIPS - 64bit woes
- From: Jim Gifford <maillist@xxxxxxxxx>
- Re: MIPS - 64bit woes
- From: Jim Gifford <maillist@xxxxxxxxx>
- Re: cpu_idle and cpu_wait
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: cpu_idle and cpu_wait
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: cpu_idle and cpu_wait
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: Does oProfile support 4KE now?
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- cpu_idle and cpu_wait
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: Another problem with compiling Linux kernel
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: What are the criteria for adding a port to linux-mips...
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: Problems with Linux kernel on Broadcom SB1
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: Calibrating delay loop... crashes
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: Problems with Linux kernel on Broadcom SB1
- From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
- Re: Another problem with compiling Linux kernel
- From: Thiemo Seufer <ths@xxxxxxxxxxxx>
- Does oProfile support 4KE now?
- From: "colin" <colin@xxxxxxxxxxxxxx>
- Re: Calibrating delay loop... crashes
- From: Manish Lachwani <m_lachwani@xxxxxxxxx>
- Re: Calibrating delay loop... crashes
- From: Nguyen Thanh Binh <n_tbinh@xxxxxxxxx>
- Re: Calibrating delay loop... crashes
- From: Manish Lachwani <m_lachwani@xxxxxxxxx>
- Re: Calibrating delay loop... crashes
- From: "Kevin D. Kissell" <kevink@xxxxxxxx>
- Calibrating delay loop... crashes
- From: Nguyen Thanh Binh <n_tbinh@xxxxxxxxx>
- Re: Another problem with compiling Linux kernel
- From: David Daney <ddaney@xxxxxxxxxx>
- Another problem with compiling Linux kernel
- From: Jonathan Day <imipak@xxxxxxxxx>
- What are the criteria for adding a port to linux-mips...
- From: David Daney <ddaney@xxxxxxxxxx>
- Problems with Linux kernel on Broadcom SB1
- From: Jonathan Day <imipak@xxxxxxxxx>
- Re: JMR3927
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: JMR3927
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: [PATCH] Fix build in ide-dma.c
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: [Fwd: mtd/drivers/mtd/nand au1550nd.c,1.13,1.14]
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: MIPS - 64bit woes
- From: Jim Gifford <maillist@xxxxxxxxx>
- linux 2.6.14 (MIPS CVS) kernel build and testing
- From: M Ranga Swami Reddy <swamim@xxxxxxxxxxx>
- Re: [PATCH] Fix build in ide-dma.c
- From: David Daney <ddaney@xxxxxxxxxx>
- [PATCH] Fix build in ide-dma.c
- From: David Daney <ddaney@xxxxxxxxxx>
- [PATCH] rewrite get_wchan and its helper functions
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: [PATCH] Export IP32 mace symbol
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- JMR3927
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: [PATCH] Export IP32 mace symbol
- From: Dominique Quatravaux <dom@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: [Fwd: mtd/drivers/mtd/nand au1550nd.c,1.13,1.14]
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: [Fwd: mtd/drivers/mtd/nand au1550nd.c,1.13,1.14]
- From: Pete Popov <ppopov@xxxxxxxxxxxxxxxxx>
- [Fwd: mtd/drivers/mtd/nand au1550nd.c,1.13,1.14]
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- The Linux binutils 2.16.91.0.4 os released
- From: "H. J. Lu" <hjl@xxxxxxxxx>
- Re: [PATCH] Export IP32 mace symbol
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- [PATCH] Documentation typos
- From: Arnaud Giersch <arnaud.giersch@xxxxxxx>
- [PATCH] Add const qualifier to writes##bwlq
- From: Arnaud Giersch <arnaud.giersch@xxxxxxx>
- [PATCH] Fix IP32 sparse warnings
- From: Arnaud Giersch <arnaud.giersch@xxxxxxx>
- [PATCH] Export IP32 mace symbol
- From: Arnaud Giersch <arnaud.giersch@xxxxxxx>
- [PATCH] Fix and complete IP32 parport definitions
- From: Arnaud Giersch <arnaud.giersch@xxxxxxx>
- [PATCH] Remove include/asm-mips/riscos-syscall.h
- From: Alexey Dobriyan <adobriyan@xxxxxxxxx>
- [PATCH] Remove include/asm-mips/mipsprom.h
- From: Alexey Dobriyan <adobriyan@xxxxxxxxx>
- [PATCH] Remove include/asm-mips/gfx.h
- From: Alexey Dobriyan <adobriyan@xxxxxxxxx>
- Re: smc91x support
- From: Atsushi Nemoto <nemoto@xxxxxxxxxxxxxxxxxx>
- Re: smc91x support
- From: Peter Popov <ppopov@xxxxxxxxxxxxxxxxx>
- Re: smc91x support
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Re: smc91x support
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Re: smc91x support
- From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxx>
- Re: smc91x support
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: smc91x support
- From: Pete Popov <ppopov@xxxxxxxxxxxxxxxxx>
- smc91x support
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Re: [PATCH] add GT64111 PCI ID
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: Compiling a kernel for ibm z50
- From: Yoichi Yuasa <yuasa@xxxxxxxxxxxxxx>
- [PATCH] add GT64111 PCI ID
- From: Yoichi Yuasa <yuasa@xxxxxxxxxxxxxx>
- Re: MIPS - 64bit woes
- From: Jim Gifford <maillist@xxxxxxxxx>
- Re: MIPS - 64bit woes
- From: Kumba <kumba@xxxxxxxxxx>
- Re: [PATCH] arch/mips/au1000/common/usbdev.c: don't concatenate __FUNCTION__ with strings
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: git and tags...
- From: Franck <vagabon.xyz@xxxxxxxxx>
- Re: git and tags...
- From: Franck <vagabon.xyz@xxxxxxxxx>
- Re: MIPS - 64bit woes
- From: Jim Gifford <maillist@xxxxxxxxx>
- Re: [PATCH] Remove arch/mips/pmc-sierra/yosemite/ht-irq.c
- From: a.othieno@xxxxxxxxxx (Arthur Othieno)
- Re: git and tags...
- From: Daniel Jacobowitz <dan@xxxxxxxxxx>
- Re: Booting with NFS fails
- From: Stuart Anderson <anderson@xxxxxxxxxxxx>
- Re: git and tags...
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- [PATCH] Remove arch/mips/pmc-sierra/yosemite/ht-irq.c
- From: Alexey Dobriyan <adobriyan@xxxxxxxxx>
- [PATCH] Remove arch/mips/arc/salone.c
- From: Alexey Dobriyan <adobriyan@xxxxxxxxx>
- Re: git and tags...
- From: Franck <vagabon.xyz@xxxxxxxxx>
- [PATCH] arch/mips/au1000/common/usbdev.c: don't concatenate __FUNCTION__ with strings
- From: Alexey Dobriyan <adobriyan@xxxxxxxxx>
- Re: git and tags...
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- git and tags...
- From: Franck <vagabon.xyz@xxxxxxxxx>
- Re: Booting with NFS fails
- From: Nguyen Thanh Binh <n_tbinh@xxxxxxxxx>
- Re: MIPS - 64bit woes
- From: Stuart Anderson <anderson@xxxxxxxxxxxx>
- Re: MIPS - 64bit woes
- From: Kumba <kumba@xxxxxxxxxx>
- Re: Compiling a kernel for ibm z50
- From: Yoichi Yuasa <yuasa@xxxxxxxxxxxxxx>
- Re: MIPS - 64bit woes
- From: Jim Gifford <maillist@xxxxxxxxx>
- [PATCH] arch/mips/au1000/time.c cleanup
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: [Alsa-devel] Au1550 OSS driver issues
- From: Lee Revell <rlrevell@xxxxxxxxxxx>
- Re: [Alsa-devel] Au1550 OSS driver issues
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: [PATCH] Redefine outs[wl] for ide_outs[wl].
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Compiling a kernel for ibm z50
- From: "oski" <oski2001@xxxxxxxxxxx>
- Re: MIPS - 64bit woes
- From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
- Re: 2.6.14-git9 cobalt build fails
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: 2.6.14-git9 cobalt build fails
- From: Yoichi Yuasa <yyuasa@xxxxxxxxx>
- Re: 2.6.14-git9 cobalt build fails
- From: Stuart Longland <redhatter@xxxxxxxxxx>
- 2.6.14-git9 cobalt build fails
- From: Andre <armcc2000@xxxxxxxxx>
- [PATCH] Redefine outs[wl] for ide_outs[wl].
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: MIPS - 64bit woes
- From: Kumba <kumba@xxxxxxxxxx>
- MIPS - 64bit woes
- From: Jim Gifford <maillist@xxxxxxxxx>
- [PATCH] Fix return type of setup_frame variants
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: Booting with NFS fails
- From: Manish Lachwani <m_lachwani@xxxxxxxxx>
- Booting with NFS fails
- From: Nguyen Thanh Binh <n_tbinh@xxxxxxxxx>
- Re: [PATCH] define MAX_UDELAY_MS
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- [PATCH] define MAX_UDELAY_MS
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: 2.6.14 on Au1550 panics in free_hot_cold_page from init
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: 2.6.14 on Au1550 panics in free_hot_cold_page from init
- From: Peter Popov <ppopov@xxxxxxxxxxxxxxxxx>
- Re: linux kernel building for mips malta target board
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: [PATCH] remove mips_rtc_lock
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: [PATCH] use rtc_lock to protect RTC operations
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: [PATCH] remove mips_rtc_lock
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: [PATCH] use rtc_lock to protect RTC operations
- From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
- Re: [PATCH] use rtc_lock to protect RTC operations
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: [PATCH] remove mips_rtc_lock
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: linux kernel building for mips malta target board
- From: Stuart Anderson <anderson@xxxxxxxxxxxx>
- Re: linux kernel building for mips malta target board
- From: Stuart Anderson <anderson@xxxxxxxxxxxx>
- 2.6.14 on Au1550 panics in free_hot_cold_page from init
- From: Clem Taylor <clem.taylor@xxxxxxxxx>
- Re: linux kernel building for mips malta target board
- From: David Daney <ddaney@xxxxxxxxxx>
- Re: linux kernel building for mips malta target board
- From: David Daney <ddaney@xxxxxxxxxx>
- Re: [RFC] The driver model, I2C and gpio provision on Sharp SL-C1000 (Akita)
- From: Russell King <rmk+lkml@xxxxxxxxxxxxxxxx>
- Re: [RFC] The driver model, I2C and gpio provision on Sharp SL-C1000 (Akita)
- From: Andy Isaacson <adi@xxxxxxxxxxxxx>
- Re: Linux-2.6.12 code base for linux-mips
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- [PATCH] remove mips_rtc_lock
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- [PATCH] use rtc_lock to protect RTC operations
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Linux-2.6.12 code base for linux-mips
- From: "Sathesh Babu Edara" <satheshbabu.edara@xxxxxxxxxx>
- Working XZ console
- From: Kaj-Michael Lang <milang@xxxxxxx>
- Re: [RFC] Add 4KSx support (try 2)
- From: Franck <vagabon.xyz@xxxxxxxxx>
- [PATCH] Set proper machine type for DB1xx0 boards
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: Git Repo
- From: "Ilya A. Volynets-Evenbakh" <ilya@xxxxxxxxxxxxxxxxxxx>
- Re: Git Repo
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- RE: Git Repo
- From: "Sathesh Babu Edara" <satheshbabu.edara@xxxxxxxxxx>
- Re: [RFC] Add 4KSx support (try 2)
- From: "Kevin D. Kissell" <kevink@xxxxxxxx>
- Re: [RFC] Add 4KSx support (try 2)
- From: Franck <vagabon.xyz@xxxxxxxxx>
- Re: [RFC] Add 4KSx support (try 2)
- From: Franck <vagabon.xyz@xxxxxxxxx>
- Re: Git Repo
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: Patch file between linux-2.6.12 from kernel.org and linux-2.6.12 from linux-mips.org
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: [RFC] Add 4KSx support (try 2)
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: [2.6 patch] OSS MIPS drivers: "extern inline" -> "static inline"
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: [RFC] Add 4KSx support (try 2)
- From: "Kevin D. Kissell" <kevink@xxxxxxxx>
- [RFC] Add 4KSx support (try 2)
- From: Franck <vagabon.xyz@xxxxxxxxx>
- RE: Git Repo
- From: "Sathesh Babu Edara" <satheshbabu.edara@xxxxxxxxxx>
- Re: Git Repo
- From: Kumba <kumba@xxxxxxxxxx>
- Git Repo
- From: Jim Gifford <maillist@xxxxxxxxx>
- [2.6 patch] OSS MIPS drivers: "extern inline" -> "static inline"
- From: Adrian Bunk <bunk@xxxxxxxxx>
- Re: Linux-2.6.12 code base for linux-mips
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: Linux-2.6.12 code base for linux-mips
- From: Stuart Longland <redhatter@xxxxxxxxxx>
- Re: Execute-in-Place (XIP)
- From: David Daney <ddaney@xxxxxxxxxx>
- Re: Execute-in-Place (XIP)
- From: Chris Boot <bootc@xxxxxxxxx>
- Re: Execute-in-Place (XIP)
- From: Chris Boot <bootc@xxxxxxxxx>
- Re: Patch file between linux-2.6.12 from kernel.org and linux-2.6.12 from linux-mips.org
- From: David Daney <ddaney@xxxxxxxxxx>
- Patch file between linux-2.6.12 from kernel.org and linux-2.6.12 from linux-mips.org
- From: "Sathesh Babu Edara" <satheshbabu.edara@xxxxxxxxxx>
- Re: AU1200 fb patch
- From: Pete Popov <ppopov@xxxxxxxxxxxxxxxxx>
- Linux-2.6.12 code base for linux-mips
- From: "Sathesh Babu Edara" <satheshbabu.edara@xxxxxxxxxx>
- AU1200 fb patch
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Re: missing /dev/tty0
- From: Yoann Allain <yallain@xxxxxxxxxxxx>
- RE: missing /dev/tty0
- From: "Louis Lai" <louis.lai@xxxxxxxxxx>
- Re: missing /dev/tty0
- From: Yoann Allain <yallain@xxxxxxxxxxxx>
- Re: [PATCH] mips: prom_free_prom_memory() returns `unsigned long'
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- missing /dev/tty0
- From: "Louis Lai" <louis.lai@xxxxxxxxxx>
- [PATCH] mips: prom_free_prom_memory() returns `unsigned long'
- From: a.othieno@xxxxxxxxxx (Arthur Othieno)
- Re: [PATCH] vr41xx: add plat_setup to -mm queue
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- [PATCH] vr41xx: add plat_setup to -mm queue
- From: Yoichi Yuasa <yuasa@xxxxxxxxxxxxxx>
- Re: Execute-in-Place (XIP)
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Execute-in-Place (XIP)
- From: Chris Boot <bootc@xxxxxxxxx>
- RE: Porting oprofile to 2.4.32 kernel
- From: "Mike C. Ward" <mward@xxxxxxxxxxxxxxx>
- Re: Porting oprofile to 2.4.32 kernel
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: Where is op_model_mipsxx.c ?
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Patch queue
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Porting oprofile to 2.4.32 kernel
- From: kernel coder <lhrkernelcoder@xxxxxxxxx>
- Simple patch for dbau1200
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Re: Where is op_model_mipsxx.c ?
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Re: [PATCH] Parallel port support for SGI O2
- From: Arnaud Giersch <arnaud.giersch@xxxxxxx>
- Request: statically linked native mipsel gdb
- From: Chris Wedgwood <cw@xxxxxxxx>
- Re: Where is op_model_mipsxx.c ?
- From: David Daney <ddaney@xxxxxxxxxx>
- [RFC] Add 4KSx support
- From: Franck <vagabon.xyz@xxxxxxxxx>
- Re: Where is op_model_mipsxx.c ?
- From: Matej Kupljen <matej.kupljen@xxxxxxxx>
- Re: Problem in "copy_to_user"
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Problem in "copy_to_user"
- From: kernel coder <lhrkernelcoder@xxxxxxxxx>
- Re: [PATCH] Parallel port support for SGI O2
- From: Arnaud Giersch <arnaud.giersch@xxxxxxx>
- Re: [PATCH] add __user tag to csum_partial_copy_from_user
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- [PATCH] add __user tag to csum_partial_copy_from_user
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- kernel is overwhelmed by usb hcd's interrupts
- From: Franck <vagabon.xyz@xxxxxxxxx>
- RE: au1x00 usb device status
- From: "Hamilton, Ian" <Ian.Hamilton@xxxxxxxxx>
- [PATCH] Parallel port support for SGI O2
- From: Arnaud Giersch <arnaud.giersch@xxxxxxx>
- Re: Misc. AMD DBAu1550 fixes
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: [Slightly-OT] VR4110 core
- From: "Kevin D. Kissell" <kevink@xxxxxxxx>
- Re: [Slightly-OT] VR4110 core
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [Slightly-OT] VR4110 core
- From: Chris Boot <bootc@xxxxxxxxx>
- Re: mips 2.4 vs 2.6 stability.
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: mips 2.4 vs 2.6 stability.
- From: "Steven J. Hill" <sjhill@xxxxxxxxxxxxxxxxxx>
- mips 2.4 vs 2.6 stability.
- From: Aaditya Rai <arai@xxxxxxxxxxx>
- Re: [Slightly-OT] VR4110 core
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: Patch: ATI Xilleon port 10/11 Xilleon IDE controller support
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: Patch: ATI Xilleon port 10/11 Xilleon IDE controller support
- From: David Daney <ddaney@xxxxxxxxxx>
- Re: FW: Re: au1x00 usb device status
- From: Pete Popov <ppopov@xxxxxxxxxxxxxxxxx>
- Re: Patch: ATI Xilleon port 10/11 Xilleon IDE controller support
- From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
- Re: Patch: ATI Xilleon port 2/11 net/e100 Memory barriers and write flushing
- From: David Daney <ddaney@xxxxxxxxxx>
- Re: au1x00 usb device status
- From: Dan Malek <dan@xxxxxxxxxxxxxxxxx>
- Re: au1x00 usb device status
- From: Dan Malek <dan@xxxxxxxxxxxxxxxxx>
- Re: [Slightly-OT] VR4110 core
- From: Chris Boot <bootc@xxxxxxxxx>
- RE: au1x00 usb device status
- From: "Hamilton, Ian" <Ian.Hamilton@xxxxxxxxx>
- Re: [Slightly-OT] VR4110 core
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: au1x00 usb device status
- From: Rodolfo Giometti <giometti@xxxxxxxx>
- FW: Re: au1x00 usb device status
- From: "Hamilton, Ian" <Ian.Hamilton@xxxxxxxxx>
- Re: [Slightly-OT] VR4110 core
- From: Chris Boot <bootc@xxxxxxxxx>
- Re: [PATCH] Call flush_icache_range for handle_tlb[lsm]
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: Patch: ATI Xilleon port 2/11 net/e100 Memory barriers and write flushing
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- [PATCH] Call flush_icache_range for handle_tlb[lsm]
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: [Slightly-OT] VR4110 core
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: Patch: ATI Xilleon port 4/11 Xilleon PCI IDs
- From: Greg KH <greg@xxxxxxxxx>
- [Slightly-OT] VR4110 core
- From: Chris Boot <bootc@xxxxxxxxx>
- Misc. AMD DBAu1550 fixes
- From: Sergei Shtylylov <sshtylyov@xxxxxxxxxxxxx>
- Re: Patch: ATI Xilleon port 2/11 net/e100 Memory barriers and write flushing
- From: Jesse Brandeburg <jesse.brandeburg@xxxxxxxxx>
- Re: Patch: ATI Xilleon port 11/11 default config for xilleon STW 5X226.
- From: David Daney <ddaney@xxxxxxxxxx>
- Re: Patch: ATI Xilleon port 11/11 default config for xilleon STW 5X226.
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Patch: ATI Xilleon port 9/11 Xilleon nand flash support
- From: David Daney <ddaney@xxxxxxxxxx>
- Patch: ATI Xilleon port 11/11 default config for xilleon STW 5X226.
- From: David Daney <ddaney@xxxxxxxxxx>
- kdb patch
- From: Sachin Kulkarni <write2sck@xxxxxxxxx>
- Patch: ATI Xilleon port 10/11 Xilleon IDE controller support
- From: David Daney <ddaney@xxxxxxxxxx>
- Patch: ATI Xilleon port 7/11 New files for xilleon port
- From: David Daney <ddaney@xxxxxxxxxx>
- Re: KProbes
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: [PATCH 8/12] cerr-printk-not-prom-printf
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: [PATCH 8/12] cerr-printk-not-prom-printf
- From: Dominic Sweetman <dom@xxxxxxxx>
- Re: [PATCH 8/12] cerr-printk-not-prom-printf
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: Fwd: How to improve performance of 2.6 kernel
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: Patch: ATI Xilleon port 2/11 net/e100 Memory barriers and write flushing
- From: Arjan van de Ven <arjan@xxxxxxxxxxxxx>
- [PATCH 12/12] pci-expmem-hack
- From: "Andrew Isaacson" <adi@xxxxxxxxxxxx>
- [PATCH 11/12] 1480-ht-support
- From: "Andrew Isaacson" <adi@xxxxxxxxxxxx>
- [PATCH 8/12] cerr-printk-not-prom-printf
- From: "Andrew Isaacson" <adi@xxxxxxxxxxxx>
- [PATCH 2/12] 1480-headers
- From: "Andrew Isaacson" <adi@xxxxxxxxxxxx>
- [PATCH 9/12] sbmac-fixes
- From: "Andrew Isaacson" <adi@xxxxxxxxxxxx>
- [PATCH 4/12] sb1a-support
- From: "Andrew Isaacson" <adi@xxxxxxxxxxxx>
- [PATCH 3/12] sibyte-header-cleanup
- From: "Andrew Isaacson" <adi@xxxxxxxxxxxx>
- [PATCH 10/12] 1480-pci-support
- From: "Andrew Isaacson" <adi@xxxxxxxxxxxx>
- [PATCH 6/12] bigsur-support
- From: "Andrew Isaacson" <adi@xxxxxxxxxxxx>
- [PATCH 7/12] sb1-cache-exc-handling
- From: "Andrew Isaacson" <adi@xxxxxxxxxxxx>
- [PATCH 5/12] 1480-support
- From: "Andrew Isaacson" <adi@xxxxxxxxxxxx>
- [PATCH 0/12] bcm1480 support
- From: "Andrew Isaacson" <adi@xxxxxxxxxxxx>
- [PATCH 1/12] sibyte-fixes
- From: "Andrew Isaacson" <adi@xxxxxxxxxxxx>
- Patch: ATI Xilleon port 8/11 Integrate Xilleon port into build system
- From: David Daney <ddaney@xxxxxxxxxx>
- Patch: ATI Xilleon port 6/11 Xilleon boot info constants
- From: David Daney <ddaney@xxxxxxxxxx>
- Patch: ATI Xilleon port 5/11 Xilleon serial port definitions
- From: David Daney <ddaney@xxxxxxxxxx>
- Patch: ATI Xilleon port 4/11 Xilleon PCI IDs
- From: David Daney <ddaney@xxxxxxxxxx>
- Patch: ATI Xilleon port 3/11 serial/8250 Set UART_CAP_FIFO in early_serial_setup
- From: David Daney <ddaney@xxxxxxxxxx>
- Patch: ATI Xilleon port 2/11 net/e100 Memory barriers and write flushing
- From: David Daney <ddaney@xxxxxxxxxx>
- Patch: ATI Xilleon port 1/11 Allow PCI resources to be overridden
- From: David Daney <ddaney@xxxxxxxxxx>
- [PATCH] fix git tip for sibyte
- From: Andy Isaacson <adi@xxxxxxxxxxxxx>
- amd au1200 nand flash problem
- From: rolmax 诺迈 邢宏伟 <flyingmyheart@xxxxxxxxxxx>
- KProbes
- From: Dmitry Schwartsman <chorgy@xxxxxxxxx>
- RE: Fwd: How to improve performance of 2.6 kernel
- From: "Mitchell, Earl" <earlm@xxxxxxxx>
- problem about ISO C++...
- From: abraxas abraxas <abraxas_dragon@xxxxxxxxxxxx>
- Re: [Patch] Fix lookup_dcookie for MIPS o32
- From: David Daney <ddaney@xxxxxxxxxx>
- Re: Fix zero length sys_cacheflush
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: [Patch] Fix lookup_dcookie for MIPS o32
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: Fwd: How to improve performance of 2.6 kernel
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: [Patch] Fix lookup_dcookie for MIPS o32
- From: Thiemo Seufer <ths@xxxxxxxxxxxx>
- Re: Fix zero length sys_cacheflush
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: Fix zero length sys_cacheflush
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: [Patch] Fix lookup_dcookie for MIPS o32
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Fix zero length sys_cacheflush
- From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
- Re: [Patch] Fix lookup_dcookie for MIPS o32
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: [Patch] Fix lookup_dcookie for MIPS o32
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Malta on Linux 2.6.14_rc1
- From: hmc0116 <hmc0116@xxxxxxxxxxxx>
- Fwd: How to improve performance of 2.6 kernel
- From: kernel coder <lhrkernelcoder@xxxxxxxxx>
- Re: [Patch] Fix lookup_dcookie for MIPS o32
- From: John Levon <levon@xxxxxxxxxxxxxxxxx>
- Re: [Patch] Fix lookup_dcookie for MIPS o32
- From: David Daney <ddaney@xxxxxxxxxx>
- Re: [Patch] Fix lookup_dcookie for MIPS o32
- From: John Levon <levon@xxxxxxxxxxxxxxxxx>
- Re: power management on mips
- From: Daniel Jacobowitz <dan@xxxxxxxxxx>
- RE: power management on mips
- From: Peter Popov <ppopov@xxxxxxxxxxxxxxxxx>
- RE: power management on mips
- From: "Mitchell, Earl" <earlm@xxxxxxxx>
- RE: power management on mips
- From: Peter Popov <ppopov@xxxxxxxxxxxxxxxxx>
- RE: power management on mips
- From: "Mitchell, Earl" <earlm@xxxxxxxx>
- Re: power management on mips
- From: sjhill@xxxxxxxxxxxxxxxxxx
- Re: OProfile cannot be loaded as module...
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- power management on mips
- From: Ivan Korzakow <ivan.korzakow@xxxxxxxxx>
- Re: OProfile cannot be loaded as module...
- From: David Daney <ddaney@xxxxxxxxxx>
- Re: [Patch] Fix lookup_dcookie for MIPS o32
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: OProfile cannot be loaded as module...
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- [Patch] Fix lookup_dcookie for MIPS o32
- From: David Daney <ddaney@xxxxxxxxxx>
- Re: OProfile cannot be loaded as module...
- From: David Daney <ddaney@xxxxxxxxxx>
- Re: IP28 patches
- From: "Stephen P. Becker" <geoman@xxxxxxxxxx>
- IP28 patches
- From: peter fuerst <pf@xxxxxxxxxxxxxx>
- Re: How to improve performance of 2.6 kernel
- From: Dan Malek <dan@xxxxxxxxxxxxxxxxx>
- Re: How to improve performance of 2.6 kernel
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: How to improve performance of 2.6 kernel
- From: "Kevin D. Kissell" <KevinK@xxxxxxxx>
- Re: sti() freezes the kernel
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: sti() freezes the kernel
- From: Yoann Allain <yallain@xxxxxxxxxxxx>
- Re: sti() freezes the kernel
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Re: How to improve performance of 2.6 kernel
- From: Stuart Longland <redhatter@xxxxxxxxxx>
- How to improve performance of 2.6 kernel
- From: kernel coder <lhrkernelcoder@xxxxxxxxx>
- sti() freezes the kernel
- From: Yoann Allain <yallain@xxxxxxxxxxxx>
- Re: Linux on BCM7038 ?.
- From: Ivy green <ivy.mips@xxxxxxxxx>
- Re: I2-R10k patchset - help needed
- From: Kumba <kumba@xxxxxxxxxx>
- Re: I2-R10k patchset - help needed
- From: Karsten Merker <karsten@xxxxxxxxxxxxxxxxxxxx>
- Re: I2-R10k patchset - help needed
- From: peter fuerst <pf@xxxxxxxxxxxxxx>
- I2-R10k patchset - help needed
- From: Karsten Merker <karsten@xxxxxxxxxxxxxxxxxxxx>
- Reg Hardware context and Signal Handlers
- From: Prasad Venkata Boddupalli <bprasad@xxxxxxxxxxxxxx>
- mem_in? and mem_out? functions
- From: Shuveb Hussain <shuveb@xxxxxxxxx>
- Re: Linux on BCM7038 ?.
- From: Stuart Longland <redhatter@xxxxxxxxxx>
- about au_sleep for au1x00
- From: Rodolfo Giometti <giometti@xxxxxxxx>
- Linux on BCM7038 ?.
- From: Ivy green <ivy.mips@xxxxxxxxx>
- Re: Tftp problems with ARC firmware
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Mail converted by MHonArc
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[GCC Help]
[Bugtraq]
