> I used a quite different board (STB810), but it's > based on the same board dependent code as JBS (i.e > arch/mips/philips/pnx8550/jbs). I haven't > worked with > JBS board and I'm not sure if slot=10 is needed for > that, but it's really necessary for STB810. The JBS has only 3 pci slots and I tested all three. So the fourth one you added won't do any damage but it's not quite right either. > I also has another question - Could you please > advice: shall I create a different > arch/mips/philips/pnx8550/stb810 > and add MACH_PHILIPS_STB810 ID and defconfig > or I can use exiting JBS one? Is anything else different that would justify the new directory? If not, perhaps we just need an STB board selection in arch/mips/Kconfig, a defconfig, and an ifdef around that pci slot you sent. BTW, regarding your serial driver patch ... I have one outstanding change (small) I still have to make, as requested by rmk. Mind if I forward that email to you so you can take care of it :)? Pete Pete
