Linux for MIPS

• Thread Index

• [PATCH 6/6] MIPS: ath79: register the wireless MAC device on the AP121 board
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [PATCH 5/6] MIPS: ath79: rename ATH79_DEV_AR913X_WMAC option to ATH79_DEV_WMAC
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [PATCH 0/6] Allow to register wireless MAC device on AR933X based boards
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [PATCH 4/6] MIPS: ath79: add AR933x specific WMAC setup code
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [PATCH 3/6] MIPS: ath79: separate AR913x SoC specific WMAC setup code
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [PATCH 2/6] MIPS: ath79: remove 'ar913x' from common variable and function names
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [PATCH 1/6] MIPS: ath79: store the SoC revision in a global variable
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [PATCH v2 0/2] Dummy HPAGE_* constants for !CONFIG_HUGETLB_PAGE
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v2 1/2] hugetlb: Provide a default HPAGE_SHIFT if !CONFIG_HUGETLB_PAGE
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH v2 2/2] hugetlb: Provide safer dummy values for HPAGE_MASK and HPAGE_SIZE
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH] ath9k: rename ath9k_platform.h to ath_platform.h
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Octeon: Unconditionally build __cvmx_helper_errata_qlm_disable_2nd_order_cdr
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] hugetlb: Provide a default HPAGE_SHIFT if !CONFIG_HUGETLB_PAGE
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH V2 4/6] MIPS: lantiq: add basic support for FALC-ON
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V2 3/6] MIPS: lantiq: make irq.c support the FALC-ON
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V2 2/6] MIPS: lantiq: change ltq_request_gpio() call signature
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V2 1/6] MIPS: lantiq: reorganize xway code
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH 3/3] NET: MIPS: lantiq: return value of request_irq was not handled gracefully
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 2/3] NET: MIPS: lantiq: non existing phy was not handled gracefully
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH 1/3] NET: MIPS: lantiq: make etop ethernet work on ase/ar9
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH 2/2] Initial support for the Ubiquiti Networks XM board (rev 1.0). (patch v2)
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] Initial PCI support for Atheros 724x SoCs. (v2)
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: BCM63XX: generate WLAN MAC address after registering ethernet devices.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3 v2] MIPS: BCM63xx: fix GPIO set/get for BCM6345
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3 v2] MIPS: BCM63xx: remove BCM6345 hacks to read base boot address
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3 v2] MIPS: BCM63xx: fix SDRAM size computation for BCM6345
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH 2/2] Initial support for the Ubiquiti Networks XM board (rev 1.0). (patch v2)
  • From: Rene Bolldorf <xsecute@xxxxxxxxxxxxxx>
• [PATCH 1/2] Initial PCI support for Atheros 724x SoCs. (v2)
  • From: Rene Bolldorf <xsecute@xxxxxxxxxxxxxx>
• [PATCH 0/2] Summary
  • From: Rene Bolldorf <xsecute@xxxxxxxxxxxxxx>
• Re: [PATCH V3 4/5] MIPS: Add RTC support for Loongson1B
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V3 2/5] MIPS: Add board support for Loongson1B
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] MIPS: Alchemy: db1200: improve PB1200 detection.
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: BCM63XX: generate WLAN MAC address after registering ethernet devices.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 1/3] MIPS: Alchemy: db1200: improve PB1200 detection.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 2/2] Initial support for the Ubiquiti Networks XM board.
  • From: René Bolldorf <xsecute@xxxxxxxxxxxxxx>
• [Question] What's difference between ioremap_wc and ioremap_uncached_accelerated?
  • From: Chen Jie <chenj@xxxxxxxxxx>
• [PATCH V3 5/5] MIPS: Add defconfig for Loongson1B
  • From: keguang.zhang@xxxxxxxxx
• [PATCH V3 4/5] MIPS: Add RTC support for Loongson1B
  • From: keguang.zhang@xxxxxxxxx
• [PATCH V3 3/5] MIPS: Add Makefile and Kconfig for Loongson1B
  • From: keguang.zhang@xxxxxxxxx
• [PATCH V3 2/5] MIPS: Add board support for Loongson1B
  • From: keguang.zhang@xxxxxxxxx
• [PATCH V3 1/5] MIPS: Add CPU support for Loongson1B
  • From: keguang.zhang@xxxxxxxxx
• Re: [PATCH] hugetlb: Provide a default HPAGE_SHIFT if !CONFIG_HUGETLB_PAGE
  • From: David Rientjes <rientjes@xxxxxxxxxx>
• Re: [PATCH] hugetlb: Provide a default HPAGE_SHIFT if !CONFIG_HUGETLB_PAGE
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH] hugetlb: Provide a default HPAGE_SHIFT if !CONFIG_HUGETLB_PAGE
  • From: David Rientjes <rientjes@xxxxxxxxxx>
• Re: [PATCH] hugetlb: Provide a default HPAGE_SHIFT if !CONFIG_HUGETLB_PAGE
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH] hugetlb: Provide a default HPAGE_SHIFT if !CONFIG_HUGETLB_PAGE
  • From: David Rientjes <rientjes@xxxxxxxxxx>
• Re: [PATCH] hugetlb: Provide a default HPAGE_SHIFT if !CONFIG_HUGETLB_PAGE
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH] hugetlb: Provide a default HPAGE_SHIFT if !CONFIG_HUGETLB_PAGE
  • From: David Rientjes <rientjes@xxxxxxxxxx>
• Re: [PATCH] ath9k: rename ath9k_platform.h to ath_platform.h
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• [PATCH] MIPS: BCM63XX: generate WLAN MAC address after registering ethernet devices.
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH] MIPS: Octeon: Unconditionally build __cvmx_helper_errata_qlm_disable_2nd_order_cdr
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH 2/2] Initial support for the Ubiquiti Networks XM board.
  • From: Gabor Juhos <juhosg@xxxxxxxxxxx>
• Re: [PATCH 1/2] Initial PCI support for Atheros 724x SoCs.
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH] hugetlb: Provide a default HPAGE_SHIFT if !CONFIG_HUGETLB_PAGE
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH 00/13] MIPS: ath79: add initial support for AR933X SoCs
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] MIPS: ath79: add common USB Host Controller device
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] MIPS: ath79: handle more MISC IRQs
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] MIPS: ath79: modify number of available IRQs
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 13/13] MIPS: ath79: add initial support for the Atheros AP121 reference board
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 12/13] MIPS: ath79: register UART device for the AR933X SoCs
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 11/13] serial: add driver for the built-in UART of the AR933X SoC
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 10/13] MIPS: ath79: add AR933X specific USB platform device registration
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 09/13] USB: ehci-ath79: add device_id entry for the AR933X SoCs
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 08/13] MIPS: ath79: add config symbol for the AR933X SoCs
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 07/13] MIPS: ath79: add AR933X specific GPIO initialization
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 06/13] MIPS: ath79: add AR933X specific IRQ initialization
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 05/13] MIPS: ath79: add AR933X specific glue for ath79_device_reset_{set,clear}
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 04/13] MIPS: ath79: add AR933X specific clock init
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 03/13] MIPS: ath79: add early printk support for the AR933X SoCs
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 02/13] MIPS: ath79: add revision id for the AR933X SoCs
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH 3/3 v2] MIPS: BCM63xx: fix GPIO set/get for BCM6345
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 2/3 v2] MIPS: BCM63xx: remove BCM6345 hacks to read base boot address
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH 01/13] MIPS: ath79: remove superfluous parentheses
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH 1/3 v2] MIPS: BCM63xx: fix SDRAM size computation for BCM6345
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH 2/4] MIPS Kprobes: Deny probes on ll/sc instructions
  • From: Victor Kamensky <kamensky@xxxxxxxxx>
• Re: [PATCH 3/3] MIPS: Alchemy: fix PCI PM
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] MIPS: Alchemy: update cpu-feature-overrides
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] MIPS: Alchemy: db1200: improve PB1200 detection.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH 3/3] MIPS: Alchemy: fix PCI PM
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 2/3] MIPS: Alchemy: update cpu-feature-overrides
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 1/3] MIPS: Alchemy: db1200: improve PB1200 detection.
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• Re: [RFC] Flush huge TLB
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V2 2/4] MIPS: Add board support for Loongson1B
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] I2C: MIPS: lantiq: add FALC-ON i2c bus master
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH] SPI: MIPS: lantiq: add FALC-ON spi driver
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 6/6] MAINTAINERS: add entry for Lantiq related files
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 5/6] MIPS: lantiq: add default configs
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 4/6] MIPS: lantiq: fix pull gpio up resistors usage
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 3/6] MIPS: lantiq: fix STP gpio groups
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 2/6] MIPS: lantiq: fix cmdline parsing
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 1/6] MIPS: lantiq: fix early printk
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 6/6] MIPS: lantiq: add support for the EASY98000 evaluation board
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 5/6] MIPS: lantiq: add support for FALC-ON GPIOs
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 4/6] MIPS: lantiq: add basic support for FALC-ON
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 3/6] MIPS: lantiq: make irq.c support the FALC-ON
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 2/6] MIPS: lantiq: change ltq_request_gpio() call signature
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH V2 1/6] MIPS: lantiq: reorganize xway code
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH 2/2] MIPS: enable oprofile support on lantiq targets
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 0/8] MIPS: lantiq: some fixes and support FALC-ON
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] MIPS Kprobes: Deny probes on ll/sc instructions
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2 11/11] MIPS: BCM63XX: add support for bcm6368 CPU.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2 10/11] MIPS: BCM63XX: add external irq support for non 6348 CPUs.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2 09/11] MIPS: BCM63XX: handle 64 bits irq stat register in irq code.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2 08/11] MIPS: BCM63XX: prepare irq code to handle different external irq hardware implementation.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2 07/11] MIPS: BCM63XX: change irq code to prepare for per-cpu peculiarity.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2 06/11] MIPS: BCM63XX: add more register sets & missing register definitions.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2 05/11] MIPS: BCM63XX: cleanup cpu registers.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2 04/11] MIPS: BCM63XX: introduce bcm_readll & bcm_writell.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2 03/11] MIPS: BCM63XX: call board_register_device from device_initcall()
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2 02/11] MIPS: BCM63XX: hook up plat_ioremap to intercept soc registers remapping.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Support for Netlogic XLR/XLS I2C controller.
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• [PATCH 2/2] Initial support for the Ubiquiti Networks XM board.
  • From: Rene Bolldorf <xsecute@xxxxxxxxxxxxxx>
• [PATCH 1/2] Initial PCI support for Atheros 724x SoCs.
  • From: Rene Bolldorf <xsecute@xxxxxxxxxxxxxx>
• [PATCH 0/2] Summary
  • From: Rene Bolldorf <xsecute@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Octeon: Remove SYS_SUPPORTS_HIGHMEM.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] MIPS: Octeon: Add support for OCTEON II PCIe
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] MIPS: Octeon: Update PCI Latency timer, PCIe payload, and PCIe max read to allow larger transactions
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] MIPS: Octeon: Update DMA mapping operations for OCTEON II processors.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/5] MIPS: Octeon: Update feature test functions for new chips and features.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] MIPS: Octeon: Update SOC PCI related register definitions for new chips.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 12/12] MIPS: Netlogic: Mark Netlogic chips as SMT capable
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 11/12] MIPS: Netlogic: Add support for XLP 3XX cores
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 10/12] MIPS: Netlogic: Merge some of XLR/XLP wakup code
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 09/12] MIPS: Netlogic: Add default XLP config.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 08/12] MIPS: Netlogic: Add XLP makefiles and config
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 07/12] MIPS: Netlogic: Add XLP platform files for XLP SoC
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 06/12] MIPS: Netlogic: XLP CPU support.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 05/12] MIPS: Netlogic: Update default config
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 04/12] MIPS: Netlogic: Move code common with XLP to common/
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 03/12] MIPS: Netlogic: No need to set -Werror in mips/xlr
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 02/12] MIPS: Netlogic: Use CPU_XLR instead of NLM_XLR
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 01/12] MIPS: Netlogic: Style fixes for Platform
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] MIPS: Octeon: Remove SYS_SUPPORTS_HIGHMEM.
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 4/5] MIPS: Octeon: Update PCI Latency timer, PCIe payload, and PCIe max read to allow larger transactions
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 1/5] MIPS: Octeon: Update SOC PCI related register definitions for new chips.
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 5/5] MIPS: Octeon: Add support for OCTEON II PCIe
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 2/5] MIPS: Octeon: Update feature test functions for new chips and features.
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 3/5] MIPS: Octeon: Update DMA mapping operations for OCTEON II processors.
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 0/5] MIPS: Octeon: PCI{,e} updates for Octeon II SOCs
  • From: ddaney.cavm@xxxxxxxxx
• Re: [PATCH 2/2] MIPS: AR7: add LEDs layout for the Actiontec GT701 router
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] MIPS: AR7: constify some arrays in gpio and prom code
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2 01/11] MIPS: BCM63XX: set default pci cache line size.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH 2/2] MIPS: AR7: add LEDs layout for the Actiontec GT701 router
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 1/2] MIPS: AR7: constify some arrays in gpio and prom code
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH] i2c: Support for Netlogic XLR/XLS I2C controller.
  • From: "Jayachandran C." <jayachandranc@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] ath9k: rename ath9k_platform.h to ath_platform.h
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH] ath9k: rename ath9k_platform.h to ath_platform.h
  • From: "Luis R. Rodriguez" <mcgrof@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] MIPS: Octeon: Rearrange CVMX files in preperation for device tree
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] MIPS: Octeon: Update bootloader board type constants.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] MIPS: Octeon: Move some Ethernet support files out of staging.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Update Octeon model detection code for new chips.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] MIPS: Octeon: Update struct cvmx_bootinfo to v3.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] ath9k: rename ath9k_platform.h to ath_platform.h
  • From: Sangwook Lee <sangwook.lee@xxxxxxxxxx>
• Re: [PATCH 0/2] irq/of: Enchance irq_domain support.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH 0/2] irq/of: Enchance irq_domain support.
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH 4/5] treewide: Convert uses of ATTRIB_NORETURN to __noreturn
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] treewide: Remove useless NORET_TYPE macro and uses
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] irq/of: Enchance irq_domain support.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH V2] MIPS: lantiq: use export.h in favour of module.h
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: lantiq: fixes etop compile error due to missing includes
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V4 8/8] MIPS: BMIPS: Add SMP support code for BMIPS43xx/BMIPS5000
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH V4 8/8] MIPS: BMIPS: Add SMP support code for BMIPS43xx/BMIPS5000
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: Linux Kernel for Telekom MR303
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Linux Kernel for Telekom MR303
  • From: Matthias Bock <bockmatthias@xxxxxx>
• Re: [PATCH V2 8/8] MIPS: BMIPS: Add SMP support code for BMIPS43xx/BMIPS5000
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH V2 8/8] MIPS: BMIPS: Add SMP support code for BMIPS43xx/BMIPS5000
  • From: Florian Fainelli <ffainelli@xxxxxxxxxx>
• Re: [PATCH V2 3/8] MIPS: BMIPS: Add CFLAGS, Makefile entries for BMIPS
  • From: Florian Fainelli <ffainelli@xxxxxxxxxx>
• Re: [PATCH 0/2] irq/of: Enchance irq_domain support.
  • From: Rob Herring <robherring2@xxxxxxxxx>
• [PATCH 2/2] MIPS: Octeon: Add irq_create_of_mapping() and GPIO interrupts.
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 1/2] irq/of/ARM: Enhance irq iteration capability of irq_domain code.
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 0/2] irq/of: Enchance irq_domain support.
  • From: ddaney.cavm@xxxxxxxxx
• Re: [PATCH 3/8] MIPS: Octeon: Add irq_create_of_mapping() and GPIO interrupts.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/8] MIPS: Octeon: Add irq_create_of_mapping() and GPIO interrupts.
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH 3/8] MIPS: Octeon: Add irq_create_of_mapping() and GPIO interrupts.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH mips-next 3/3] MIPS: Alchemy: merge Au1000 and Au1300-style IRQ controller code.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH mips-next 2/3] MIPS: Alchemy: chain IRQ controllers to MIPS IRQ controller
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH mips-next 1/3] MIPS: Alchemy: irq: register pm at irq init time
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V3 8/8] MIPS: BMIPS: Add SMP support code for BMIPS43xx/BMIPS5000
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V3 5/8] MIPS: BMIPS: Introduce bmips.h
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V2 8/8] MIPS: BMIPS: Add SMP support code for BMIPS43xx/BMIPS5000
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V2 7/8] MIPS: Add board_ebase_setup()
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V2 6/8] MIPS: Add NMI notifier
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V2 5/8] MIPS: BMIPS: Introduce bmips.h
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V2 4/8] MIPS: BMIPS: Add set/clear CP0 macros for BMIPS operations
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V2 3/8] MIPS: BMIPS: Add CFLAGS, Makefile entries for BMIPS
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V2 2/8] MIPS: Clean up whitespace warning in hazards.h
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V2 1/8] MIPS: BMIPS: Fix up Kconfig settings
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH V3 8/8] MIPS: BMIPS: Add SMP support code for BMIPS43xx/BMIPS5000
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH V3 5/8] MIPS: BMIPS: Introduce bmips.h
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH V2 3/8] MIPS: BMIPS: Add CFLAGS, Makefile entries for BMIPS
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V2 3/8] MIPS: BMIPS: Add CFLAGS, Makefile entries for BMIPS
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH 3/8] MIPS: Octeon: Add irq_create_of_mapping() and GPIO interrupts.
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH V2] MIPS: Alchemy: pci: fix build: missing export.h
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 12/12] MIPS: Netlogic: Mark Netlogic chips as SMT capable
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 12/12] MIPS: Netlogic: Mark Netlogic chips as SMT capable
  • From: Hillf Danton <dhillf@xxxxxxxxx>
• Re: [PATCH V2 5/8] MIPS: BMIPS: Introduce bmips.h
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V2 6/8] MIPS: Add NMI notifier
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 12/12] MIPS: Netlogic: Mark Netlogic chips as SMT capable
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH V2 3/8] MIPS: BMIPS: Add CFLAGS, Makefile entries for BMIPS
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 12/12] MIPS: Netlogic: Mark Netlogic chips as SMT capable
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH 12/12] MIPS: Netlogic: Mark Netlogic chips as SMT capable
  • From: Hillf Danton <dhillf@xxxxxxxxx>
• [PATCH 11/12] MIPS: Netlogic: Add support for XLP 3XX cores
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 10/12] MIPS: Netlogic: Merge some of XLR/XLP wakup code
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 09/12] MIPS: Netlogic: Add default XLP config.
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 08/12] MIPS: Netlogic: Add XLP makefiles and config
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 07/12] MIPS: Netlogic: Add XLP platform files for XLP SoC
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 06/12] MIPS: Netlogic: XLP CPU support.
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 05/12] MIPS: Netlogic: Update default config
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 04/12] MIPS: Netlogic: Move code common with XLP to common/
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 03/12] MIPS: Netlogic: No need to set -Werror in mips/xlr
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 02/12] MIPS: Netlogic: Use CPU_XLR instead of NLM_XLR
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 01/12] MIPS: Netlogic: Style fixes for Platform
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 00/12] MIPS: Support for Netlogic XLP processors
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH V2 8/8] MIPS: BMIPS: Add SMP support code for BMIPS43xx/BMIPS5000
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH V2 7/8] MIPS: Add board_ebase_setup()
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH V2 6/8] MIPS: Add NMI notifier
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH V2 5/8] MIPS: BMIPS: Introduce bmips.h
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH V2 4/8] MIPS: BMIPS: Add set/clear CP0 macros for BMIPS operations
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH V2 3/8] MIPS: BMIPS: Add CFLAGS, Makefile entries for BMIPS
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH V2 2/8] MIPS: Clean up whitespace warning in hazards.h
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH V2 1/8] MIPS: BMIPS: Fix up Kconfig settings
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 8/8] staging: octeon_ethernet: Convert to use device tree.
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 7/8] netdev: octeon_mgmt: Convert to use device tree.
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 6/8] netdev: mdio-octeon.c: Convert to use device tree.
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 5/8] i2c: Convert i2c-octeon.c to use device tree.
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 4/8] MIPS: Octeon: Initialize and fixup device tree.
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 1/8] MIPS: Octeon: Add device tree source files.
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 0/8] of/MIPS/i2c/net: Convert OCTEON to use device-tree
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 2/8] MIPS: Prune some target specific code out of prom.c
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 3/8] MIPS: Octeon: Add irq_create_of_mapping() and GPIO interrupts.
  • From: ddaney.cavm@xxxxxxxxx
• Re: [PATCH 4/5] treewide: Convert uses of ATTRIB_NORETURN to __noreturn
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• [PATCH 1/2] of/lib: Allow scripts/dtc/libfdt to be used from kernel code
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 2/2] of: Make of_find_node_by_path() traverse /aliases for relative paths.
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 0/2] of: Allow scripts/dtc/libfdt to be used from kernel code and more...
  • From: ddaney.cavm@xxxxxxxxx
• Re: [PATCH] netdev/phy: Use mdiobus_read() so that proper locks are taken.
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH 0/3] Move some Octeon support files out of staging.
  • From: Greg KH <gregkh@xxxxxxx>
• [PATCH 1/3] MIPS: Octeon: Move some Ethernet support files out of staging.
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 0/3] Move some Octeon support files out of staging.
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 3/3] MIPS: Octeon: Rearrange CVMX files in preperation for device tree
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 2/3] MIPS: Octeon: Update bootloader board type constants.
  • From: ddaney.cavm@xxxxxxxxx
• Re: [PATCH] netdev/phy: Use mdiobus_read() so that proper locks are taken.
  • From: Tabi Timur-B04825 <B04825@xxxxxxxxxxxxx>
• [PATCH] MIPS: Update Octeon model detection code for new chips.
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH 1/2] MIPS: Octeon: Update struct cvmx_bootinfo to v3.
  • From: ddaney.cavm@xxxxxxxxx
• [PATCH V2] MIPS: lantiq: use export.h in favour of module.h
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH] MIPS: lantiq: fixes etop compile error due to missing includes
  • From: John Crispin <blogic@xxxxxxxxxxx>
• [PATCH mips-next 3/3] MIPS: Alchemy: merge Au1000 and Au1300-style IRQ controller code.
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH mips-next 1/3] MIPS: Alchemy: irq: register pm at irq init time
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH mips-next 2/3] MIPS: Alchemy: chain IRQ controllers to MIPS IRQ controller
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH mips-next 0/3] MIPS: Alchemy: autoselect IRQ at bootup
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH V2] MIPS: Alchemy: pci: fix build: missing export.h
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH Resend 1/2] fs: binfmt_elf: Create Kconfig variable for PIE randomization.
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH Resend 2/2] MIPS: Randomize PIE load address
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH mips-next] MIPS: Alchemy: pci: fix build: missing module.h
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: lantiq: Fix compile error in arch/mips/lantiq/xway/dma.c
  • From: John Crispin <john@xxxxxxxxxxx>
• [PATCH] MIPS: lantiq: Fix compile error in arch/mips/lantiq/xway/dma.c
  • From: John Crispin <blogic@xxxxxxxxxxx>
• Re: [PATCH] MIPS: ASID conflict after CPU hotplug
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH mips-next] MIPS: Alchemy: DB1200 audio support depends on MIPS arch
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH mips-next] MIPS: Alchemy: DB1200 audio support depends on MIPS arch
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] treewide: Remove useless NORET_TYPE macro and uses
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] treewide: Convert uses of ATTRIB_NORETURN to __noreturn
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] MIPS/Perf-events: update the map of unsupported events for 74K
  • From: Deng-Cheng Zhu <dczhu@xxxxxxxx>
• [PATCH 4/5] treewide: Convert uses of ATTRIB_NORETURN to __noreturn
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 3/5] treewide: Remove useless NORET_TYPE macro and uses
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 0/5] treewide: __attribute__ neatening
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 1/2] fs: binfmt_elf: Create Kconfig variable for PIE randomization.
  • From: "H. Peter Anvin" <hpa@xxxxxxxxx>
• [PATCH 2/2] MIPS: Randomize PIE load address
  • From: David Daney <david.daney@xxxxxxxxxx>
• [PATCH 1/2] fs: binfmt_elf: Create Kconfig variable for PIE randomization.
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH] MIPS: Octeon: Fix compile error in arch/mips/cavium-octeon/flash_setup.c
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] MIPS: Octeon: Fix compile error in arch/mips/cavium-octeon/flash_setup.c
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH 1/4] MIPS/Perf-events: update the map of unsupported events for 74K
  • From: Peter Zijlstra <a.p.zijlstra@xxxxxxxxx>
• Re: [PATCH] mips: loongson2_clock: include linux/module.h
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] MIPS/Perf-events: update the map of unsupported events for 74K
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] mips: loongson2_clock: include linux/module.h
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH mips-next] MIPS: Alchemy: pci: fix build: missing module.h
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH mips-next] MIPS: Alchemy: pci: fix build: missing module.h
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Alchemy: db1100: fix build: missing module.h
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Alchemy: db1300: fix build: missing module.h
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] MIPS: Alchemy: db1100: fix build: missing module.h
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH] MIPS: Alchemy: db1300: fix build: missing module.h
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• Re: patch to support topdown mmap allocation in MIPS
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] staging: octeon-ethernet: Fix compile error caused by changed to struct skb_frag_struct.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 18/18] MIPS: Alchemy: Touchscreen support on DB1100
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 17/18] MIPS: Alchemy: hook up IrDA on DB1000/DB1100
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 16/18] net/irda: convert au1k_ir to platform driver.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 15/18] MIPS: Alchemy: remove unused board headers
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 14/18] MTD: nand: make au1550nd.c a platform_driver
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 13/18] MIPS: Alchemy: add RTC device to all devboards
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 12/18] MIPS: Alchemy: MMC for DB1100
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 11/18] MIPS: Alchemy: one kernel for DB1000/DB1500/DB1100
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 10/18] MIPS: Alchemy: Merge PB1200 support into DB1200 code.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 09/18] MIPS: Alchemy: move au1200fb global functions to platform data
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2 08/18] MIPS: Alchemy: merge devboard code into single per-board files.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 07/18] MIPS: Alchemy: merge GPR/MTX-1/XXS1500 board code into single files
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 06/18] MIPS: Alchemy: better DB1550 support
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 05/18] MIPS: Alchemy: DB1300 support
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 04/18] MIPS: Alchemy: Au1300 SoC support
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 03/18] MIPS: Alchemy: devboards: remove unneeded BCSR IRQ reg acc
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 02/18] MIPS: Alchemy: drop MIRAGE/BOSPORUS board support
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND 01/18] MIPS: Alchemy: remove PB1000 support
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Kbuild: append missing-syscalls to the default target list
  • From: Michal Marek <mmarek@xxxxxxx>
• Re: [PATCH RESEND 1/9] MIPS: Add local_flush_tlb_all_mm to clear all mm contexts on calling cpu
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2 00/11] MIPS: BCM63XX: add support for Broadcom 6368 CPU.
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• Re: [PATCH v2 10/11] MIPS: BCM63XX: add external irq support for non 6348 CPUs.
  • From: Jonas Gorski <jonas.gorski+openwrt@xxxxxxxxx>
• Re: [PATCH] MIPS: Kernel hangs occasionally during boot.
  • From: "Gleb O. Raiko" <raiko@xxxxxxxxxxxx>
• Re: [PATCH] MIPS: Kernel hangs occasionally during boot.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Kbuild: append missing-syscalls to the default target list
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Kernel hangs occasionally during boot.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Kernel hangs occasionally during boot.
  • From: "Gleb O. Raiko" <raiko@xxxxxxxxxxxx>
• Re: [PATCH RESEND 1/9] MIPS: Add local_flush_tlb_all_mm to clear all mm contexts on calling cpu
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH 1/4] MIPS Kprobes: Fix OOPS in arch_prepare_kprobe()
  • From: Maneesh Soni <manesoni@xxxxxxxxx>
• Re: [PATCH] MIPS: Hook up process_vm_readv and process_vm_writev system calls.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] MIPS Kprobes: Deny probes on ll/sc instructions
  • From: Victor Kamensky <kamensky@xxxxxxxxx>
• [PATCH] MIPS: Hook up process_vm_readv and process_vm_writev system calls.
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH] Kbuild: append missing-syscalls to the default target list
  • From: Michal Marek <mmarek@xxxxxxx>
• Re: [PATCH 2/4] MIPS Kprobes: Deny probes on ll/sc instructions
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH 1/4] MIPS Kprobes: Fix OOPS in arch_prepare_kprobe()
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH RESEND 1/9] MIPS: Add local_flush_tlb_all_mm to clear all mm contexts on calling cpu
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH] Kbuild: append missing-syscalls to the default target list
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH] MIPS: Kernel hangs occasionally during boot.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH 1/4] MIPS Kprobes: Fix OOPS in arch_prepare_kprobe()
  • From: Maneesh Soni <manesoni@xxxxxxxxx>
• [PATCH 4/4] MIPS Kprobes: Support branch instructions probing - v2
  • From: Maneesh Soni <manesoni@xxxxxxxxx>
• [PATCH 3/4] MIPS Kprobes: Refactoring Branch emulation
  • From: Maneesh Soni <manesoni@xxxxxxxxx>
• [PATCH 2/4] MIPS Kprobes: Deny probes on ll/sc instructions
  • From: Maneesh Soni <manesoni@xxxxxxxxx>
• [PATCH 0/4] MIPS Kprobes
  • From: Maneesh Soni <manesoni@xxxxxxxxx>
• Re: [PATCH RESEND 1/9] MIPS: Add local_flush_tlb_all_mm to clear all mm contexts on calling cpu
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 9/9] MIPS: BMIPS: Add SMP support code for BMIPS43xx/BMIPS5000
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 3/9] MIPS: BMIPS: Add XKS01 feature flag to Kconfig
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 8/9] MIPS: Add board_* hooks for ebase and NMI
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• built-in command line vs. bootloader-supplied
  • From: Ricard Wanderlof <ricard.wanderlof@xxxxxxxx>
• Re: [PATCH 7/9] MIPS: BMIPS: Introduce bmips.h
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] MIPS: Kernel hangs occasionally during boot.
  • From: "Al Cooper" <alcooperx@xxxxxxxxx>
• Re: [PATCH] MIPS: Add fast get_user_pages
  • From: Hillf Danton <dhillf@xxxxxxxxx>
• Re: [PATCH] Kbuild: append missing-syscalls to the default target list
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Kbuild: append missing-syscalls to the default target list
  • From: Michal Marek <mmarek@xxxxxxx>
• Re: [PATCH] Kbuild: append missing-syscalls to the default target list
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Kbuild: append missing-syscalls to the default target list
  • From: Michal Marek <mmarek@xxxxxxx>
• [PATCH] staging: octeon-ethernet: Fix compile error caused by changed to struct skb_frag_struct.
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH] Kbuild: append missing-syscalls to the default target list
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Add fast get_user_pages
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 12/49] MIPS: irq: Remove IRQF_DISABLED
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• Re: [PATCH 12/49] MIPS: irq: Remove IRQF_DISABLED
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• Re: [PATCH 12/49] MIPS: irq: Remove IRQF_DISABLED
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• Re: [PATCH] MIPS: Keep TLB cache hot while flushing
  • From: Hillf Danton <dhillf@xxxxxxxxx>
• [PATCH 9/9] MIPS: BMIPS: Add SMP support code for BMIPS43xx/BMIPS5000
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 8/9] MIPS: Add board_* hooks for ebase and NMI
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 7/9] MIPS: BMIPS: Introduce bmips.h
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 6/9] MIPS: BMIPS: Add set/clear CP0 macros for BMIPS operations
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 5/9] MIPS: BMIPS: Add CFLAGS, Makefile entries for BMIPS
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 4/9] MIPS: Clean up whitespace warning in hazards.h
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 3/9] MIPS: BMIPS: Add XKS01 feature flag to Kconfig
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 2/9] MIPS: BMIPS: Fix up Kconfig settings
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH RESEND 1/9] MIPS: Add local_flush_tlb_all_mm to clear all mm contexts on calling cpu
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH v2 04/11] MIPS: BCM63XX: introduce bcm_readll & bcm_writell.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH v2 10/11] MIPS: BCM63XX: add external irq support for non 6348 CPUs.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH v2 09/11] MIPS: BCM63XX: handle 64 bits irq stat register in irq code.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH v2 05/11] MIPS: BCM63XX: cleanup cpu registers.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH v2 04/11] MIPS: BCM63XX: introduce bcm_readll & bcm_writell.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH v2 08/11] MIPS: BCM63XX: prepare irq code to handle different external irq hardware implementation.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH v2 07/11] MIPS: BCM63XX: change irq code to prepare for per-cpu peculiarity.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH v2 06/11] MIPS: BCM63XX: add more register sets & missing register definitions.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH v2 11/11] MIPS: BCM63XX: add support for bcm6368 CPU.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH v2 03/11] MIPS: BCM63XX: call board_register_device from device_initcall()
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH v2 02/11] MIPS: BCM63XX: hook up plat_ioremap to intercept soc registers remapping.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH v2 01/11] MIPS: BCM63XX: set default pci cache line size.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• [PATCH v2 00/11] MIPS: BCM63XX: add support for Broadcom 6368 CPU.
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• Re: [PATCH] MIPS: remove port limit in ioport_map
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: AR7: constify some arrays in gpio and prom code
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] MIPS: AR7: constify some arrays in gpio and prom code
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH] MIPS: Handle init mem in systems where kernel does not reside in add_memory_region() memory.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Octeon: Mark SMP-IPI interrupt as IRQF_NO_THREAD
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Add fast get_user_pages
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Keep TLB cache hot while flushing
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] MIPS: remove port limit in ioport_map
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• Re: [PATCH 12/49] MIPS: irq: Remove IRQF_DISABLED
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v3] GIO bus support for SGI IP22/28
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH v3] GIO bus support for SGI IP22/28
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] MIPS: BCM47xx: fix build with GENERIC_GPIO configuration
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH v2] MIPS: BCM47xx: fix build with GENERIC_GPIO configuration
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [ADMIN] Git repositories on linux-mips.org have moved
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH RFC 4/8] mips: implement syscall restart generically
  • From: Jonas Bonn <jonas.bonn@xxxxxxxxx>
• Re: [PATCH RFC 4/8] mips: implement syscall restart generically
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH v2 08/18] MIPS: Alchemy: merge devboard code into single per-board files.
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: BCM47xxx: fix build with GENERIC_GPIO configuration
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• Re: [PATCH] MIPS: BCM47xxx: fix build with GENERIC_GPIO configuration
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] MIPS: BCM47xxx: fix build with GENERIC_GPIO configuration
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH v3] asm-generic/gpio.h: merge basic gpiolib wrappers
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: [RESEND PATCH v3 0/2] Pass resources to pci_create_bus() and fix MIPS PCI resources
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• Re: [RESEND PATCH v3 0/2] Pass resources to pci_create_bus() and fix MIPS PCI resources
  • From: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] Revert "MIPS: MTX-1: Make au1000_eth probe all PHY
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Issue with core dump
  • From: Oleg Nesterov <oleg@xxxxxxxxxx>
• Re: Issue with core dump
  • From: Tejun Heo <htejun@xxxxxxxxx>
• Re: [PATCH] Fix off-by-two in arcs_cmdline buffer size check
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH RESEND 01/18] MIPS: Alchemy: remove PB1000 support
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• Re: [PATCH 01/18] MIPS: Alchemy: remove PB1000 support
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Issue with core dump
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Issue with core dump
  • From: trisha yad <trisha1march@xxxxxxxxx>
• [PATCH 10/18] MIPS: Alchemy: Merge PB1200 support into DB1200 code.
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 18/18] MIPS: Alchemy: Touchscreen support on DB1100
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 17/18] MIPS: Alchemy: hook up IrDA on DB1000/DB1100
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 16/18] net/irda: convert au1k_ir to platform driver.
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 15/18] MIPS: Alchemy: remove unused board headers
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 14/18] MTD: nand: make au1550nd.c a platform_driver
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 13/18] MIPS: Alchemy: add RTC device to all devboards
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 12/18] MIPS: Alchemy: MMC for DB1100
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 11/18] MIPS: Alchemy: one kernel for DB1000/DB1500/DB1100
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 09/18] MIPS: Alchemy: move au1200fb global functions to platform data
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 08/18] MIPS: Alchemy: merge devboard code into single per-board files.
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 07/18] MIPS: Alchemy: merge GPR/MTX-1/XXS1500 board code into single files
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 06/18] MIPS: Alchemy: better DB1550 support
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 05/18] MIPS: Alchemy: DB1300 support
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 04/18] MIPS: Alchemy: Au1300 SoC support
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 03/18] MIPS: Alchemy: devboards: remove unneeded BCSR IRQ reg acc
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 02/18] MIPS: Alchemy: drop MIRAGE/BOSPORUS board support
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 01/18] MIPS: Alchemy: remove PB1000 support
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 00/18] MIPS: Alchemy board and driver updates
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• Re: Issue with core dump
  • From: Tejun Heo <htejun@xxxxxxxxx>
• Re: Issue with core dump
  • From: Oleg Nesterov <oleg@xxxxxxxxxx>
• Issue with core dump
  • From: trisha yad <trisha1march@xxxxxxxxx>
• Re: [PATCH v2] GIO bus support for SGI IP22/28
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [MIPS]clocks_calc_mult_shift() may gen a too big mult value
  • From: John Stultz <johnstul@xxxxxxxxxx>
• Re: [MIPS]clocks_calc_mult_shift() may gen a too big mult value
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [MIPS]clocks_calc_mult_shift() may gen a too big mult value
  • From: John Stultz <johnstul@xxxxxxxxxx>
• Re: [MIPS]clocks_calc_mult_shift() may gen a too big mult value
  • From: zhangfx <zhangfx@xxxxxxxxxx>
• Re: [MIPS]clocks_calc_mult_shift() may gen a too big mult value
  • From: John Stultz <johnstul@xxxxxxxxxx>
• Re: [MIPS]clocks_calc_mult_shift() may gen a too big mult value
  • From: Chen Jie <chenj@xxxxxxxxxx>
• Re: [PATCH] I2C: SiByte: Convert the driver to make use of interrupts
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [MIPS]clocks_calc_mult_shift() may gen a too big mult value
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [MIPS]clocks_calc_mult_shift() may gen a too big mult value
  • From: Chen Jie <chenj@xxxxxxxxxx>
• Re: [PATCH v2] GIO bus support for SGI IP22/28
  • From: Joshua Kinard <kumba@xxxxxxxxxx>
• Re: [PATCH v2] GIO bus support for SGI IP22/28
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] GIO bus support for SGI IP22/28
  • From: Joshua Kinard <kumba@xxxxxxxxxx>
• Re: [PATCH v2] GIO bus support for SGI IP22/28
  • From: Florian Tobias Schandinat <FlorianSchandinat@xxxxxx>
• [PATCH] Fix off-by-two in arcs_cmdline buffer size check
  • From: Thomas Jarosch <thomas.jarosch@xxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Keep TLB cache hot while flushing
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• [PATCH] MIPS: Keep TLB cache hot while flushing
  • From: Hillf Danton <dhillf@xxxxxxxxx>
• [PATCH] MIPS: Add fast get_user_pages
  • From: Hillf Danton <dhillf@xxxxxxxxx>
• Re: bug in fchownat in n32 and 64 ABIs
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: bug in fchownat in n32 and 64 ABIs
  • From: Bruno Haible <bruno@xxxxxxxxx>
• [PATCH v2] asm-generic/gpio.h: merge basic gpiolib wrappers
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: bug in fchownat in n32 and 64 ABIs
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: bug in fchownat in n32 and 64 ABIs
  • From: David Daney <david.daney@xxxxxxxxxx>
• bug in fchownat in n32 and 64 ABIs
  • From: Bruno Haible <bruno@xxxxxxxxx>
• Re: [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: [PATCH V2 2/4] MIPS: Add board support for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH] gpiolib/arches: Centralise bolierplate asm/gpio.h
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V2 2/4] MIPS: Add board support for Loongson1B
  • From: Giuseppe CAVALLARO <peppe.cavallaro@xxxxxx>
• Re: [PATCH V2 2/4] MIPS: Add board support for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH] gpiolib/arches: Centralise bolierplate asm/gpio.h
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: [PATCH V2 2/4] MIPS: Add board support for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH V2 2/4] MIPS: Add board support for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH] gpiolib/arches: Centralise bolierplate asm/gpio.h
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] gpiolib/arches: Centralise bolierplate asm/gpio.h
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH V2 2/4] MIPS: Add board support for Loongson1B
  • From: Giuseppe CAVALLARO <peppe.cavallaro@xxxxxx>
• [PATCH] gpiolib/arches: Centralise bolierplate asm/gpio.h
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V2 2/4] MIPS: Add board support for Loongson1B
  • From: Giuseppe CAVALLARO <peppe.cavallaro@xxxxxx>
• Re: [PATCH 3/4] MIPS/Perf-events: temporarily connect event to its pmu at event init
  • From: Deng-Cheng Zhu <dczhu@xxxxxxxx>
• Re: [PATCH V2 2/4] MIPS: Add board support for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH V2 2/4] MIPS: Add board support for Loongson1B
  • From: Giuseppe CAVALLARO <peppe.cavallaro@xxxxxx>
• Re: [PATCH V2 2/4] MIPS: Add board support for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH V2 2/4] MIPS: Add board support for Loongson1B
  • From: Giuseppe CAVALLARO <peppe.cavallaro@xxxxxx>
• [PATCH 4/4] MIPS/Perf-events: Cleanup event->destroy at event init
  • From: Deng-Cheng Zhu <dczhu@xxxxxxxx>
• [PATCH 2/4] MIPS/Perf-events: remove erroneous check on active_events
  • From: Deng-Cheng Zhu <dczhu@xxxxxxxx>
• [PATCH 3/4] MIPS/Perf-events: temporarily connect event to its pmu at event init
  • From: Deng-Cheng Zhu <dczhu@xxxxxxxx>
• [PATCH 1/4] MIPS/Perf-events: update the map of unsupported events for 74K
  • From: Deng-Cheng Zhu <dczhu@xxxxxxxx>
• [PATCH 0/4] MIPS/Perf-events: Functional fixes and cleanups
  • From: Deng-Cheng Zhu <dczhu@xxxxxxxx>
• Re: [PATCH V2 2/4] MIPS: Add board support for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH V2 2/4] MIPS: Add board support for Loongson1B
  • From: Giuseppe CAVALLARO <peppe.cavallaro@xxxxxx>
• Re: YeeLoong / hotkey driver
  • From: Wu Zhangjin <wuzhangjin@xxxxxxxxx>
• [PATCH 10/12] MIPS: Netlogic: Merge some of XLR/XLP wakup code
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 11/12] MIPS: Netlogic: Add support for XLP 3XX cores
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 12/12] MIPS: Netlogic: Mark Netlogic chips as SMT capable
  • From: Hillf Danton <dhillf@xxxxxxxxx>
• [PATCH 07/12] MIPS: Netlogic: Add XLP platform files for XLP SoC
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 09/12] MIPS: Netlogic: Add default XLP config.
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 08/12] MIPS: Netlogic: Add XLP makefiles and config
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 06/12] MIPS: Netlogic: XLP CPU support.
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 05/12] MIPS: Netlogic: Update default config
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 04/12] MIPS: Netlogic: Move code common with XLP to common/
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 03/12] MIPS: Netlogic: No need to set -Werror in mips/xlr
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 02/12] MIPS: Netlogic: Use CPU_XLR instead of NLM_XLR
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 00/12] MIPS: Support for Netlogic XLP processors
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 01/12] MIPS: Netlogic: Style fixes for Platform
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH RFC 4/8] mips: implement syscall restart generically
  • From: Jonas Bonn <jonas@xxxxxxxxxxxx>
• [PATCH 12/49] MIPS: irq: Remove IRQF_DISABLED
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• Re: cause IP zero on interrupt
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: cause IP zero on interrupt
  • From: David Daney <david.daney@xxxxxxxxxx>
• cause IP zero on interrupt
  • From: Noor <noor.mubeen@xxxxxxxxx>
• Re: [PATCH V2 2/4] MIPS: Add board support for Loongson1B
  • From: Wu Zhangjin <wuzhangjin@xxxxxxxxx>
• Re: [PATCH] mips: call oops_enter, oops_exit in die
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] Revert "MIPS: MTX-1: Make au1000_eth probe all PHY
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH V2 4/4] MIPS: Add defconfig for Loongson1B
  • From: keguang.zhang@xxxxxxxxx
• [PATCH V2 3/4] MIPS: Add Makefile and Kconfig for Loongson1B
  • From: keguang.zhang@xxxxxxxxx
• [PATCH V2 2/4] MIPS: Add board support for Loongson1B
  • From: keguang.zhang@xxxxxxxxx
• [PATCH V2 1/4] MIPS: Add CPU support for Loongson1B
  • From: keguang.zhang@xxxxxxxxx
• [PATCH v2] GIO bus support for SGI IP22/28
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [PATCH] GIO bus support for SGI IP22/28
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [PATCH] GIO bus support for SGI IP22/28
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] GIO bus support for SGI IP22/28
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] GIO bus support for SGI IP22/28
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] GIO bus support for SGI IP22/28
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mips: fix the build with C=1
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] mips: fix the build with C=1
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: YeeLoong / hotkey driver
  • From: Paul Roge <proge@xxxxxxxxxx>
• [PATCH] Revert "MIPS: MTX-1: Make au1000_eth probe all PHY
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: some questions about translation lookaside buffer
  • From: loody <miloody@xxxxxxxxx>
• Re: some questions about translation lookaside buffer
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• some questions about translation lookaside buffer
  • From: loody <miloody@xxxxxxxxx>
• Re: YeeLoong / hotkey driver
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• Re: YeeLoong / hotkey driver
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• Re: [PATCH] MIPS Kprobes: Support branch instructions probing
  • From: Maneesh Soni <manesoni@xxxxxxxxx>
• Re: [PATCH] MIPS Kprobes: Support branch instructions probing
  • From: Maneesh Soni <manesoni@xxxxxxxxx>
• Re: [RFC] Flush huge TLB
  • From: Hillf Danton <dhillf@xxxxxxxxx>
• [PATCH 14/21] mips: drop unused Kconfig symbols
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• Re: [PATCH] MIPS Kprobes: Support branch instructions probing
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS Kprobes: Support branch instructions probing
  • From: Victor Kamensky <kamensky@xxxxxxxxx>
• Re: [PATCH] MIPS Kprobes: Support branch instructions probing
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS Kprobes: Support branch instructions probing
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH] MIPS Kprobes: Support branch instructions probing
  • From: Maneesh Soni <manesoni@xxxxxxxxx>
• Re: [PATCH] MIPS Kprobes: Support branch instructions probing
  • From: Ananth N Mavinakayanahalli <ananth@xxxxxxxxxx>
• Re: [PATCH] MIPS Kprobes: Support branch instructions probing
  • From: Ananth N Mavinakayanahalli <ananth@xxxxxxxxxx>
• [PATCH] MIPS Kprobes: Support branch instructions probing
  • From: Maneesh Soni <manesoni@xxxxxxxxx>
• Re: YeeLoong / hotkey driver
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• YeeLoong / hotkey driver
  • From: Andreas Barth <aba@xxxxxxxxxxxxxxx>
• Re: using mprotect to write to .text
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: using mprotect to write to .text
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: using mprotect to write to .text
  • From: Joe Buehler <aspam@xxxxxxx>
• Re: using mprotect to write to .text
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: using mprotect to write to .text
  • From: Joe Buehler <aspam@xxxxxxx>
• Re: using mprotect to write to .text
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [RESEND PATCH v3 0/2] Pass resources to pci_create_bus() and fix MIPS PCI resources
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• using mprotect to write to .text
  • From: Joe Buehler <aspam@xxxxxxx>
• RE: [RESEND PATCH v3 0/2] Pass resources to pci_create_bus() and fix MIPS PCI resources
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• RE: [RESEND PATCH v3 0/2] Pass resources to pci_create_bus() and fix MIPS PCI resources
  • From: "Zhu, DengCheng" <dczhu@xxxxxxxx>
• Re: [RESEND PATCH v3 0/2] Pass resources to pci_create_bus() and fix MIPS PCI resources
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• Re: [RFC] Flush huge TLB
  • From: David Daney <david.daney@xxxxxxxxxx>
• [RFC] Flush huge TLB
  • From: Hillf Danton <dhillf@xxxxxxxxx>
• Re: [RESEND PATCH v3 0/2] Pass resources to pci_create_bus() and fix MIPS PCI resources
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• Re: [PATCH V2] MIPS: Alchemy: redo PCI as platform driver
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• Re: [PATCH V2] MIPS: Alchemy: redo PCI as platform driver
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH V2] MIPS: Alchemy: redo PCI as platform driver
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH] mips/ide: flush dcache also if icache does not snoop dcache
  • From: Andreas Barth <aba@xxxxxxxxxxxxxxx>
• Re: [RFC] mark Netlogic XLR chip as SMT capable
  • From: Hillf Danton <dhillf@xxxxxxxxx>
• Re: [PATCH] MIPS: Octeon: Mark octeon_wdt interrupt as IRQF_NO_THREAD
  • From: Venkat Subbiah <venkat.subbiah@xxxxxxxxxx>
• [PATCH] MIPS: Octeon: Mark octeon_wdt interrupt as IRQF_NO_THREAD
  • From: Venkat Subbiah <venkat.subbiah@xxxxxxxxxx>
• Re: [PATCH] MIPS: Octeon: Mark SMP-IPI interrupt as IRQF_NO_THREAD
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [PATCH] MIPS: Octeon: Mark SMP-IPI interrupt as IRQF_NO_THREAD
  • From: Venkat Subbiah <venkat.subbiah@xxxxxxxxxxxxxxxxxx>
• 0001-MIPS-Octeon-Mark-SMP-IPI-interrupt-as-IRQF_NO_THREAD.patch
  • From: Venkat Subbiah <venkat.subbiah@xxxxxxxxxxxxxxxxxx>
• Re: [RFC] mark Netlogic XLR chip as SMT capable
  • From: "Jayachandran C." <jayachandranc@xxxxxxxxxxxxxxxxx>
• Re: [RFC] mark Netlogic XLR chip as SMT capable
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [RFC] mark Netlogic XLR chip as SMT capable
  • From: Hillf Danton <dhillf@xxxxxxxxx>
• Re: [RFC] mark Netlogic XLR chip as SMT capable
  • From: "Jayachandran C." <jayachandranc@xxxxxxxxxxxxxxxxx>
• [RFC] mark Netlogic XLR chip as SMT capable
  • From: Hillf Danton <dhillf@xxxxxxxxx>
• Re: [RFC] activate performance counter registers on Netlogic XLR chip
  • From: Hillf Danton <dhillf@xxxxxxxxx>
• Re: [RFC] count TLB refill for Netlogic XLR chip
  • From: Hillf Danton <dhillf@xxxxxxxxx>
• Re: [RFC] activate performance counter registers on Netlogic XLR chip
  • From: "Jayachandran C." <jayachandranc@xxxxxxxxxxxxxxxxx>
• Re: [RFC] count TLB refill for Netlogic XLR chip
  • From: "Jayachandran C." <jayachandranc@xxxxxxxxxxxxxxxxx>
• [RFC] activate performance counter registers on Netlogic XLR chip
  • From: Hillf Danton <dhillf@xxxxxxxxx>
• [RFC] count TLB refill for Netlogic XLR chip
  • From: Hillf Danton <dhillf@xxxxxxxxx>
• Re: [PATCH] netdev/phy/icplus: Use mdiobus_write() and mdiobus_read() for proper locking.
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] netdev/phy: Use mdiobus_read() so that proper locks are taken.
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH] netdev/phy/icplus: Use mdiobus_write() and mdiobus_read() for proper locking.
  • From: David Daney <david.daney@xxxxxxxxxx>
• [PATCH] netdev/phy: Use mdiobus_read() so that proper locks are taken.
  • From: David Daney <david.daney@xxxxxxxxxx>
• [PATCH] mips: call oops_enter, oops_exit in die
  • From: Nathan Lynch <ntl@xxxxxxxxx>
• Re: [PATCH] add MIPS assembler version of twofish crypto algorithm
  • From: David Kuehling <dvdkhlng@xxxxxx>
• Re: $ta0 .. $ta3 registers in O32 on MIPS
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• RE: $ta0 .. $ta3 registers in O32 on MIPS
  • From: <Paul_Koning@xxxxxxxx>
• Re: [PATCH] add MIPS assembler version of twofish crypto algorithm
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] add MIPS assembler version of twofish crypto algorithm
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• $ta0 .. $ta3 registers in O32 on MIPS
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH 9/9] MIPS: Netlogic: Add default XLP config.
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 8/9] MIPS: Netlogic: Add XLP makefiles and config
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 7/9] MIPS: Netlogic: Add XLP platform files for XLP SoC
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 6/9] MIPS: Netlogic: XLP CPU support.
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 5/9] MIPS: Netlogic: Update default config
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 4/9] MIPS: Netlogic: Move code common with XLP to common/
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 3/9] MIPS: Netlogic: No need to set -Werror in mips/xlr
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 2/9] MIPS: Netlogic: Use CPU_XLR instead of NLM_XLR
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 1/9] MIPS: Netlogic: Style fixes for Platform
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 0/9] Add support for Netlogic XLP
  • From: Jayachandran C <jayachandranc@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] staging/octeon: Software should check the checksum of no tcp/udp packets
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] staging/octeon: Software should check the checksum of no tcp/udp packets
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] staging/octeon: Software should check the checksum of no tcp/udp packets
  • From: David Daney <david.daney@xxxxxxxxxx>
• [PATCH 2/2] MIPS: Add defconfig for Loongson1B (UPDATED)
  • From: keguang.zhang@xxxxxxxxx
• [PATCH 1/2] MIPS: Add basic support for Loongson1B (UPDATED)
  • From: keguang.zhang@xxxxxxxxx
• Re: [PATCH 2/2] MIPS: Add defconfig for Loongson1B (UPDATED)
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH v5 3/5] MIPS: perf: Reorganize contents of perf support files.
  • From: Deng-Cheng Zhu <dengcheng.zhu@xxxxxxxxx>
• Re: [PATCH v5 4/5] MIPS: perf: Add support for 64-bit perf counters.
  • From: Deng-Cheng Zhu <dengcheng.zhu@xxxxxxxxx>
• Re: [PATCH 2/2] MIPS: Add defconfig for Loongson1B (UPDATED)
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH 1/2] MIPS: Add basic support for Loongson1B (UPDATED)
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH 1/2] MIPS: Add basic support for Loongson1B (UPDATED)
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH 1/2] MIPS: Add basic support for Loongson1B (UPDATED)
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• [PATCH] staging/octeon: Software should check the checksum of no tcp/udp packets
  • From: <rongqing.li@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] MIPS: Add basic support for Loongson1B (UPDATED)
  • From: Shane McDonald <mcdonald.shane@xxxxxxxxx>
• Re: [PATCH 1/2] MIPS: Add basic support for Loongson1B (UPDATED)
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• Re: [PATCH 2/2] MIPS: Add defconfig for Loongson1B (UPDATED)
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• Re: [PATCH v5 4/5] MIPS: perf: Add support for 64-bit perf counters.
  • From: David Daney <david.s.daney@xxxxxxxxx>
• Re: [PATCH v5 3/5] MIPS: perf: Reorganize contents of perf support files.
  • From: David Daney <david.s.daney@xxxxxxxxx>
• [PATCH 2/2] MIPS: Alchemy: drop MIRAGE/BOSPORUS board support
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 1/2] MIPS: Alchemy: remove PB1000 support
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 0/2] MIPS: Alchemy: remove old board support
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 2/2] MIPS: Add defconfig for Loongson1B (UPDATED)
  • From: keguang.zhang@xxxxxxxxx
• [PATCH 1/2] MIPS: Add basic support for Loongson1B (UPDATED)
  • From: keguang.zhang@xxxxxxxxx
• Re: [PATCH] MIPS: Add basic support for Loongson1B (UPDATED)
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH v5 4/5] MIPS: perf: Add support for 64-bit perf counters.
  • From: Deng-Cheng Zhu <dengcheng.zhu@xxxxxxxxx>
• Re: [PATCH v5 3/5] MIPS: perf: Reorganize contents of perf support files.
  • From: Deng-Cheng Zhu <dengcheng.zhu@xxxxxxxxx>
• Re: [PATCH v5 2/5] MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c
  • From: Deng-Cheng Zhu <dengcheng.zhu@xxxxxxxxx>
• Re: [PATCH] MIPS: JZ4740: GPIO: Use new name for generic ack function.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v5 5/5] MIPS: perf: Add Octeon support for hardware perf.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v5 4/5] MIPS: perf: Add support for 64-bit perf counters.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v5 3/5] MIPS: perf: Reorganize contents of perf support files.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v5 2/5] MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v5 1/5] MIPS: Add accessor macros for 64-bit performance counter registers.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] MIPS: Add probes for more Octeon II CPUs.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] MIPS: Add more CPU identifiers for Octeon II CPUs.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH v5 2/5] MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH 2/2] MIPS: Add probes for more Octeon II CPUs.
  • From: David Daney <david.daney@xxxxxxxxxx>
• [PATCH v5 4/5] MIPS: perf: Add support for 64-bit perf counters.
  • From: David Daney <david.daney@xxxxxxxxxx>
• [PATCH v5 3/5] MIPS: perf: Reorganize contents of perf support files.
  • From: David Daney <david.daney@xxxxxxxxxx>
• [PATCH v5 5/5] MIPS: perf: Add Octeon support for hardware perf.
  • From: David Daney <david.daney@xxxxxxxxxx>
• [PATCH v5 1/5] MIPS: Add accessor macros for 64-bit performance counter registers.
  • From: David Daney <david.daney@xxxxxxxxxx>
• [PATCH v5 0/5] MIPS: perf: Add support for 64-bit MIPS hardware counters.
  • From: David Daney <david.daney@xxxxxxxxxx>
• [PATCH 2/2] MIPS: Add probes for more Octeon II CPUs.
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [PATCH 2/5] MIPS: bcm63xx: fix SDRAM size computation for BCM6345
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH 2/5] MIPS: bcm63xx: fix SDRAM size computation for BCM6345
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH 12/55] MIPS: irq: Remove IRQF_DISABLED
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• Re: [PATCH] mips: mm: tlbex.c: Fix compiler warnings
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 1/3] MIPS: introduce GENERIC_DUMP_TLB
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 4/5] MIPS: bcm63xx: remove BCM6345 hacks to read base boot address
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 5/5] MIPS: bcm63xx: fix GPIO set/get for BCM6345
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 3/3] MIPS: introduce CPU_R4K_CACHE_TLB
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 2/5] MIPS: bcm63xx: fix SDRAM size computation for BCM6345
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 3/5] MIPS: bcm63xx: define MPI_BASE for BCM6345
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 1/5] MIPS: bcm63xx: define SDRAM_MBASE_REG
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 1/3] MIPS: introduce GENERIC_DUMP_TLB
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 2/3] MIPS: introduce CPU_R4K_FPU
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 12/57] MIPS: irq: Remove IRQF_DISABLED
  • From: Yong Zhang <yong.zhang0@xxxxxxxxx>
• [PATCH 2/2] MIPS: Add probes for more Octeon II CPUs.
  • From: David Daney <david.daney@xxxxxxxxxx>
• [PATCH 1/2] MIPS: Add more CPU identifiers for Octeon II CPUs.
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: Does the VIA VT6212 USB Host controller works on SGI/Mips?
  • From: Joshua Kinard <kumba@xxxxxxxxxx>
• Re: Does the VIA VT6212 USB Host controller works on SGI/Mips?
  • From: BSDero <bsdero@xxxxxxxxx>
• Re: Does the VIA VT6212 USB Host controller works on SGI/Mips?
  • From: Joshua Kinard <kumba@xxxxxxxxxx>
• Does the VIA VT6212 USB Host controller works on SGI/Mips?
  • From: BSDero <bsdero@xxxxxxxxx>
• Re: [PATCH] MIPS: No branches in delay slots for huge pages in handle_tlbl
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Add basic support for Loongson1B (UPDATED)
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH] MIPS: Add basic support for Loongson1B (UPDATED)
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• Re: i8042_enable_kbd_port in arch/mips/loongson/lemote-2f/pm.c?
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• Re: [PATCH] MIPS: SMTC: Correct saving of CP0_STATUS
  • From: "Edgar E. Iglesias" <edgar.iglesias@xxxxxxxxx>
• Re: [PATCH] MIPS: SMTC: Correct saving of CP0_STATUS
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: SMTC: Correct saving of CP0_STATUS
  • From: "Edgar E. Iglesias" <edgar.iglesias@xxxxxxxxx>
• [PATCH] MIPS: No branches in delay slots for huge pages in handle_tlbl
  • From: David Daney <david.daney@xxxxxxxxxx>
• Re: [patch net-next-2.6] net: consolidate and fix ethtool_ops->get_settings calling
  • From: David Miller <davem@xxxxxxxxxx>
• Re: [PATCH] MIPS: SMTC: Correct saving of CP0_STATUS
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH 0/4] Impact video driver for SGI Indigo2
  • From: peter fuerst <post@xxxxxxxx>
• Re: Octeon crash in virt_to_page(&core0_stack_variable)
  • From: Cosmin Ratiu <cratiu@xxxxxxxxxxx>
• [PATCH] MIPS: Add basic support for Loongson1B (UPDATED)
  • From: keguang.zhang@xxxxxxxxx
• [PATCH] mips/loongson: unify machtype-code into common/machtype.c, get rid of include/asm/mach-loongson/machine.h
  • From: Andreas Barth <aba@xxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Add basic support for Loongson1B
  • From: Andreas Barth <aba@xxxxxxxxxxxxxxx>
• malloc() and flushcache
  • From: liang peng <peter.bssf@xxxxxxxxx>
• Re: [PATCH 2/3] netdev/of/phy: Add MDIO bus multiplexer support.
  • From: David Daney <david.s.daney@xxxxxxxxx>
• Re: [PATCH] MIPS: Add basic support for Loongson1B
  • From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
• Re: [PATCH 2/3] netdev/of/phy: Add MDIO bus multiplexer support.
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: Device tree property names for MDIO bus multiplexer. Was: Re: [PATCH 2/3] netdev/of/phy: Add MDIO bus multiplexer support.
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Device tree property names for MDIO bus multiplexer. Was: Re: [PATCH 2/3] netdev/of/phy: Add MDIO bus multiplexer support.
  • From: David Daney <david.daney@xxxxxxxxxx>