On 11/10/2011 04:29 PM, Tabi Timur-B04825 wrote:
On Fri, Sep 30, 2011 at 4:51 PM, David Daney<david.daney@xxxxxxxxxx> wrote:
Accesses to the mdio busses must be done with the mdio_lock to ensure
proper operation. Conveniently we have the helper function
mdiobus_read() to do that for us. Lets use it in get_phy_id() instead
of accessing the bus without the lock held.
Signed-off-by: David Daney<david.daney@xxxxxxxxxx>
---
This patch is causing me problems, but I'm not exactly certain how.
I think it is because fsl_pq_mdio_probe() is defective.
You are using the bus, by calling fsl_pq_mdio_find_free(), before the
driver is registered and initialized by calling of_mdiobus_register().
At least that is my take on it.
David Daney
The problems only appear when I add some unrelated code to my platform
file (p1022ds.c), but the trap is definitely in the phy code:
Fixed MDIO Bus: probed
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
Call Trace:
[e685dcc0] [c0008c7c] show_stack+0x44/0x154 (unreliable)
[e685dd00] [c007bf74] __lock_acquire+0x1374/0x1824
[e685ddb0] [c007c870] lock_acquire+0x4c/0x68
[e685ddd0] [c0455fe4] mutex_lock_nested+0x6c/0x394
[e685de30] [c02acc08] mdiobus_read+0x3c/0x78
[e685de50] [c02abc98] get_phy_id+0x24/0x80
[e685de70] [c02b1860] fsl_pq_mdio_probe+0x3ac/0x458
[e685deb0] [c027ba2c] platform_drv_probe+0x20/0x30
[e685dec0] [c027a4b0] driver_probe_device+0xa4/0x1d4
[e685dee0] [c027a6a4] __driver_attach+0xc4/0xc8
[e685df00] [c027939c] bus_for_each_dev+0x60/0x9c
[e685df30] [c027a0e4] driver_attach+0x24/0x34
[e685df40] [c0279d30] bus_add_driver+0x1b0/0x278
[e685df70] [c027aab8] driver_register+0x88/0x154
[e685df90] [c027bd5c] platform_driver_register+0x68/0x78
[e685dfa0] [c05d47c8] fsl_pq_mdio_init+0x18/0x28
[e685dfb0] [c0001eb8] do_one_initcall+0x34/0x1ac
[e685dfe0] [c05b984c] kernel_init+0xa0/0x13c
[e685dff0] [c000e588] kernel_thread+0x4c/0x68
Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc0456080
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=8 P1022 DS
Modules linked in:
NIP: c0456080 LR: c0456068 CTR: 00000000
REGS: e685dd20 TRAP: 0300 Not tainted (3.2.0-10b-00092-g66f2305-dirty)
MSR: 00021000<ME,CE> CR: 22042044 XER: 20000000
DEAR: 00000000, ESR: 00800000
TASK = e6860000[1] 'swapper' THREAD: e685c000 CPU: 0
GPR00: ffffffff e685ddd0 e6860000 e6e58028 e685ddd8 e685c000 e685dde4 00000002
GPR08: 00000000 00000000 00000000 00000000 44042022 40401800 00000000 00000000
GPR16: c0000a00 00000014 3fffffff 03ff9000 00000015 7ff3a68c c061e000 00000000
GPR24: e6e5804c e685ddd8 e6e5802c 00029000 e6860000 c0620000 e685c000 e6e58028
NIP [c0456080] mutex_lock_nested+0x108/0x394
LR [c0456068] mutex_lock_nested+0xf0/0x394
Call Trace:
[e685ddd0] [c0456068] mutex_lock_nested+0xf0/0x394 (unreliable)
[e685de30] [c02acc08] mdiobus_read+0x3c/0x78
[e685de50] [c02abc98] get_phy_id+0x24/0x80
[e685de70] [c02b1860] fsl_pq_mdio_probe+0x3ac/0x458
[e685deb0] [c027ba2c] platform_drv_probe+0x20/0x30
[e685dec0] [c027a4b0] driver_probe_device+0xa4/0x1d4
[e685dee0] [c027a6a4] __driver_attach+0xc4/0xc8
[e685df00] [c027939c] bus_for_each_dev+0x60/0x9c
[e685df30] [c027a0e4] driver_attach+0x24/0x34
[e685df40] [c0279d30] bus_add_driver+0x1b0/0x278
[e685df70] [c027aab8] driver_register+0x88/0x154
[e685df90] [c027bd5c] platform_driver_register+0x68/0x78
[e685dfa0] [c05d47c8] fsl_pq_mdio_init+0x18/0x28
[e685dfb0] [c0001eb8] do_one_initcall+0x34/0x1ac
[e685dfe0] [c05b984c] kernel_init+0xa0/0x13c
[e685dff0] [c000e588] kernel_thread+0x4c/0x68
Instruction dump:
7f24cb78 4bc21141 80bc0004 7fe3fb78 7f24cb78 4bc21325 813f0028 3b1f0024
933f0028 3800ffff 93010008 9121000c
93810010 7c0004ac 7d20f828
---[ end trace 7cc8bbd19b132dac ]---
note: swapper[1] exited with preempt_count 1
Kernel panic - not syncing: Attempted to kill init!
Call Trace:
[e685dc00] [c0008c7c] show_stack+0x44/0x154 (unreliable)
[e685dc40] [c04583a0] panic+0xb4/0x1f0
[e685dc90] [c004724c] do_exit+0x5dc/0x684
[e685dce0] [c000b368] die+0xdc/0x1b4
[e685dd00] [c00137fc] bad_page_fault+0xb4/0xfc
[e685dd10] [c000f998] handle_page_fault+0x7c/0x80
--- Exception: 300 at mutex_lock_nested+0x108/0x394
LR = mutex_lock_nested+0xf0/0x394
[e685de30] [c02acc08] mdiobus_read+0x3c/0x78
[e685de50] [c02abc98] get_phy_id+0x24/0x80
[e685de70] [c02b1860] fsl_pq_mdio_probe+0x3ac/0x458
[e685deb0] [c027ba2c] platform_drv_probe+0x20/0x30
[e685dec0] [c027a4b0] driver_probe_device+0xa4/0x1d4
[e685dee0] [c027a6a4] __driver_attach+0xc4/0xc8
[e685df00] [c027939c] bus_for_each_dev+0x60/0x9c
[e685df30] [c027a0e4] driver_attach+0x24/0x34
[e685df40] [c0279d30] bus_add_driver+0x1b0/0x278
[e685df70] [c027aab8] driver_register+0x88/0x154
[e685df90] [c027bd5c] platform_driver_register+0x68/0x78
[e685dfa0] [c05d47c8] fsl_pq_mdio_init+0x18/0x28
[e685dfb0] [c0001eb8] do_one_initcall+0x34/0x1ac
[e685dfe0] [c05b984c] kernel_init+0xa0/0x13c
[e685dff0] [c000e588] kernel_thread+0x4c/0x68
Rebooting in 1 seconds..
I'm still trying to narrow down what's causing the problem, but when I
revert this patch, I don't see these traps.
Sometimes, I don't get the trap, but I get a hang on this line:
int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum)
{
int retval;
BUG_ON(in_interrupt());
---> mutex_lock(&bus->mdio_lock);
