All Devboards can use the 32kHz counter as a RTC device.
Also delete the custom CMOS RTC header, which can be used for the
DS1693 on the PB1500. But since it doesn't have a buffer battery
it is as useful as the on-chip RTC which I prefer.
Signed-off-by: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
---
arch/mips/alchemy/devboards/db1200.c | 8 -----
arch/mips/alchemy/devboards/db1300.c | 8 -----
arch/mips/alchemy/devboards/db1550.c | 8 -----
arch/mips/alchemy/devboards/platform.c | 13 +++++++-
arch/mips/include/asm/mach-pb1x00/mc146818rtc.h | 34 -----------------------
5 files changed, 11 insertions(+), 60 deletions(-)
delete mode 100644 arch/mips/include/asm/mach-pb1x00/mc146818rtc.h
diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c
index ec481f3..1181241 100644
--- a/arch/mips/alchemy/devboards/db1200.c
+++ b/arch/mips/alchemy/devboards/db1200.c
@@ -312,13 +312,6 @@ static struct platform_device db1200_ide_dev = {
/**********************************************************************/
-static struct platform_device db1200_rtc_dev = {
- .name = "rtc-au1xxx",
- .id = -1,
-};
-
-/**********************************************************************/
-
/* SD carddetects: they're supposed to be edge-triggered, but ack
* doesn't seem to work (CPLD Rev 2). Instead, the screaming one
* is disabled and its counterpart enabled. The 500ms timeout is
@@ -755,7 +748,6 @@ static struct platform_device *db1200_devs[] __initdata = {
&db1200_mmc0_dev,
&au1200_lcd_dev,
&db1200_eth_dev,
- &db1200_rtc_dev,
&db1200_nand_dev,
&db1200_audiodma_dev,
&db1200_audio_dev,
diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c
index d1a7344..23fd4ff 100644
--- a/arch/mips/alchemy/devboards/db1300.c
+++ b/arch/mips/alchemy/devboards/db1300.c
@@ -385,13 +385,6 @@ static struct platform_device db1300_5waysw_dev = {
/**********************************************************************/
-static struct platform_device db1300_rtc_dev = {
- .name = "rtc-au1xxx",
- .id = -1,
-};
-
-/**********************************************************************/
-
static struct pata_platform_info db1300_ide_info = {
.ioport_shift = DB1300_IDE_REG_SHIFT,
};
@@ -696,7 +689,6 @@ static struct platform_device *db1300_dev[] __initdata = {
&db1300_eth_dev,
&db1300_i2c_dev,
&db1300_5waysw_dev,
- &db1300_rtc_dev,
&db1300_nand_dev,
&db1300_ide_dev,
&db1300_sd0_dev,
diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c
index a4755b0..6815d07 100644
--- a/arch/mips/alchemy/devboards/db1550.c
+++ b/arch/mips/alchemy/devboards/db1550.c
@@ -372,13 +372,6 @@ static struct platform_device db1550_sndi2s_dev = {
/**********************************************************************/
-static struct platform_device db1550_rtc_dev = {
- .name = "rtc-au1xxx",
- .id = -1,
-};
-
-/**********************************************************************/
-
static int db1550_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
{
if ((slot < 11) || (slot > 13) || pin == 0)
@@ -427,7 +420,6 @@ static struct platform_device db1550_pci_host_dev = {
/**********************************************************************/
static struct platform_device *db1550_devs[] __initdata = {
- &db1550_rtc_dev,
&db1550_nand_dev,
&db1550_i2c_dev,
&db1550_ac97_dev,
diff --git a/arch/mips/alchemy/devboards/platform.c b/arch/mips/alchemy/devboards/platform.c
index 49a4b32..621f70a 100644
--- a/arch/mips/alchemy/devboards/platform.c
+++ b/arch/mips/alchemy/devboards/platform.c
@@ -13,6 +13,13 @@
#include <asm/reboot.h>
#include <asm/mach-db1x00/bcsr.h>
+
+static struct platform_device db1x00_rtc_dev = {
+ .name = "rtc-au1xxx",
+ .id = -1,
+};
+
+
static void db1x_power_off(void)
{
bcsr_write(BCSR_RESETS, 0);
@@ -25,7 +32,7 @@ static void db1x_reset(char *c)
bcsr_write(BCSR_SYSTEM, 0);
}
-static int __init db1x_poweroff_setup(void)
+static int __init db1x_late_setup(void)
{
if (!pm_power_off)
pm_power_off = db1x_power_off;
@@ -34,9 +41,11 @@ static int __init db1x_poweroff_setup(void)
if (!_machine_restart)
_machine_restart = db1x_reset;
+ platform_device_register(&db1x00_rtc_dev);
+
return 0;
}
-late_initcall(db1x_poweroff_setup);
+device_initcall(db1x_late_setup);
/* register a pcmcia socket */
int __init db1x_register_pcmcia_socket(phys_addr_t pcmcia_attr_start,
diff --git a/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h b/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h
deleted file mode 100644
index 622c587..0000000
--- a/arch/mips/include/asm/mach-pb1x00/mc146818rtc.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998, 2001, 03 by Ralf Baechle
- *
- * RTC routines for PC style attached Dallas chip.
- */
-#ifndef __ASM_MACH_AU1XX_MC146818RTC_H
-#define __ASM_MACH_AU1XX_MC146818RTC_H
-
-#include <asm/io.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#define RTC_PORT(x) (0x0c000000 + (x))
-#define RTC_IRQ 8
-#define PB1500_RTC_ADDR 0x0c000000
-
-static inline unsigned char CMOS_READ(unsigned long offset)
-{
- offset <<= 2;
- return (u8)(au_readl(offset + PB1500_RTC_ADDR) & 0xff);
-}
-
-static inline void CMOS_WRITE(unsigned char data, unsigned long offset)
-{
- offset <<= 2;
- au_writel(data, offset + PB1500_RTC_ADDR);
-}
-
-#define RTC_ALWAYS_BCD 1
-
-#endif /* __ASM_MACH_AU1XX_MC146818RTC_H */
--
1.7.7.1
