Most of these files are have more comments than real code; merge
them all into single board-<name>.c files.
Signed-off-by: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
---
arch/mips/alchemy/Makefile | 3 +
arch/mips/alchemy/Platform | 8 +-
arch/mips/alchemy/board-gpr.c | 303 ++++++++++++++++++++++++++++++
arch/mips/alchemy/board-mtx1.c | 313 +++++++++++++++++++++++++++++++
arch/mips/alchemy/board-xxs1500.c | 154 +++++++++++++++
arch/mips/alchemy/gpr/Makefile | 8 -
arch/mips/alchemy/gpr/board_setup.c | 75 --------
arch/mips/alchemy/gpr/init.c | 63 ------
arch/mips/alchemy/gpr/platform.c | 230 -----------------------
arch/mips/alchemy/mtx-1/Makefile | 9 -
arch/mips/alchemy/mtx-1/board_setup.c | 94 ---------
arch/mips/alchemy/mtx-1/init.c | 66 -------
arch/mips/alchemy/mtx-1/platform.c | 230 -----------------------
arch/mips/alchemy/xxs1500/Makefile | 8 -
arch/mips/alchemy/xxs1500/board_setup.c | 93 ---------
arch/mips/alchemy/xxs1500/init.c | 63 ------
arch/mips/alchemy/xxs1500/platform.c | 63 ------
17 files changed, 777 insertions(+), 1006 deletions(-)
create mode 100644 arch/mips/alchemy/Makefile
create mode 100644 arch/mips/alchemy/board-gpr.c
create mode 100644 arch/mips/alchemy/board-mtx1.c
create mode 100644 arch/mips/alchemy/board-xxs1500.c
delete mode 100644 arch/mips/alchemy/gpr/Makefile
delete mode 100644 arch/mips/alchemy/gpr/board_setup.c
delete mode 100644 arch/mips/alchemy/gpr/init.c
delete mode 100644 arch/mips/alchemy/gpr/platform.c
delete mode 100644 arch/mips/alchemy/mtx-1/Makefile
delete mode 100644 arch/mips/alchemy/mtx-1/board_setup.c
delete mode 100644 arch/mips/alchemy/mtx-1/init.c
delete mode 100644 arch/mips/alchemy/mtx-1/platform.c
delete mode 100644 arch/mips/alchemy/xxs1500/Makefile
delete mode 100644 arch/mips/alchemy/xxs1500/board_setup.c
delete mode 100644 arch/mips/alchemy/xxs1500/init.c
delete mode 100644 arch/mips/alchemy/xxs1500/platform.c
diff --git a/arch/mips/alchemy/Makefile b/arch/mips/alchemy/Makefile
new file mode 100644
index 0000000..aac3b17
--- /dev/null
+++ b/arch/mips/alchemy/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_MIPS_GPR) += board-gpr.o
+obj-$(CONFIG_MIPS_MTX1) += board-mtx1.o
+obj-$(CONFIG_MIPS_XXS1500) += board-xxs1500.o
diff --git a/arch/mips/alchemy/Platform b/arch/mips/alchemy/Platform
index 4d13e21..c032f5b 100644
--- a/arch/mips/alchemy/Platform
+++ b/arch/mips/alchemy/Platform
@@ -75,21 +75,21 @@ cflags-$(CONFIG_MIPS_DB1300) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
load-$(CONFIG_MIPS_DB1300) += 0xffffffff80100000
#
-# 4G-Systems eval board
+# 4G-Systems MTX-1 "MeshCube" wireless router
#
-platform-$(CONFIG_MIPS_MTX1) += alchemy/mtx-1/
+platform-$(CONFIG_MIPS_MTX1) += alchemy/
load-$(CONFIG_MIPS_MTX1) += 0xffffffff80100000
#
# MyCable eval board
#
-platform-$(CONFIG_MIPS_XXS1500) += alchemy/xxs1500/
+platform-$(CONFIG_MIPS_XXS1500) += alchemy/
load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000
#
# Trapeze ITS GRP board
#
-platform-$(CONFIG_MIPS_GPR) += alchemy/gpr/
+platform-$(CONFIG_MIPS_GPR) += alchemy/
load-$(CONFIG_MIPS_GPR) += 0xffffffff80100000
# boards can specify their own <gpio.h> in one of their include dirs.
diff --git a/arch/mips/alchemy/board-gpr.c b/arch/mips/alchemy/board-gpr.c
new file mode 100644
index 0000000..ba32590
--- /dev/null
+++ b/arch/mips/alchemy/board-gpr.c
@@ -0,0 +1,303 @@
+/*
+ * GPR board platform device registration (Au1550)
+ *
+ * Copyright (C) 2010 Wolfgang Grandegger <wg@xxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <prom.h>
+
+const char *get_system_type(void)
+{
+ return "GPR";
+}
+
+void __init prom_init(void)
+{
+ unsigned char *memsize_str;
+ unsigned long memsize;
+
+ prom_argc = fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
+
+ prom_init_cmdline();
+
+ memsize_str = prom_getenv("memsize");
+ if (!memsize_str)
+ memsize = 0x04000000;
+ else
+ strict_strtoul(memsize_str, 0, &memsize);
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
+
+void prom_putchar(unsigned char c)
+{
+ alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
+}
+
+static void gpr_reset(char *c)
+{
+ /* switch System-LED to orange (red# and green# on) */
+ alchemy_gpio_direction_output(4, 0);
+ alchemy_gpio_direction_output(5, 0);
+
+ /* trigger watchdog to reset board in 200ms */
+ printk(KERN_EMERG "Triggering watchdog soft reset...\n");
+ raw_local_irq_disable();
+ alchemy_gpio_direction_output(1, 0);
+ udelay(1);
+ alchemy_gpio_set_value(1, 1);
+ while (1)
+ cpu_wait();
+}
+
+static void gpr_power_off(void)
+{
+ while (1)
+ cpu_wait();
+}
+
+void __init board_setup(void)
+{
+ printk(KERN_INFO "Trapeze ITS GPR board\n");
+
+ pm_power_off = gpr_power_off;
+ _machine_halt = gpr_power_off;
+ _machine_restart = gpr_reset;
+
+ /* Enable UART1/3 */
+ alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
+ alchemy_uart_enable(AU1000_UART1_PHYS_ADDR);
+
+ /* Take away Reset of UMTS-card */
+ alchemy_gpio_direction_output(215, 1);
+}
+
+/*
+ * Watchdog
+ */
+static struct resource gpr_wdt_resource[] = {
+ [0] = {
+ .start = 1,
+ .end = 1,
+ .name = "gpr-adm6320-wdt",
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device gpr_wdt_device = {
+ .name = "adm6320-wdt",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(gpr_wdt_resource),
+ .resource = gpr_wdt_resource,
+};
+
+/*
+ * FLASH
+ *
+ * 0x00000000-0x00200000 : "kernel"
+ * 0x00200000-0x00a00000 : "rootfs"
+ * 0x01d00000-0x01f00000 : "config"
+ * 0x01c00000-0x01d00000 : "yamon"
+ * 0x01d00000-0x01d40000 : "yamon env vars"
+ * 0x00000000-0x00a00000 : "kernel+rootfs"
+ */
+static struct mtd_partition gpr_mtd_partitions[] = {
+ {
+ .name = "kernel",
+ .size = 0x00200000,
+ .offset = 0,
+ },
+ {
+ .name = "rootfs",
+ .size = 0x00800000,
+ .offset = MTDPART_OFS_APPEND,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "config",
+ .size = 0x00200000,
+ .offset = 0x01d00000,
+ },
+ {
+ .name = "yamon",
+ .size = 0x00100000,
+ .offset = 0x01c00000,
+ },
+ {
+ .name = "yamon env vars",
+ .size = 0x00040000,
+ .offset = MTDPART_OFS_APPEND,
+ },
+ {
+ .name = "kernel+rootfs",
+ .size = 0x00a00000,
+ .offset = 0,
+ },
+};
+
+static struct physmap_flash_data gpr_flash_data = {
+ .width = 4,
+ .nr_parts = ARRAY_SIZE(gpr_mtd_partitions),
+ .parts = gpr_mtd_partitions,
+};
+
+static struct resource gpr_mtd_resource = {
+ .start = 0x1e000000,
+ .end = 0x1fffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device gpr_mtd_device = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &gpr_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &gpr_mtd_resource,
+};
+
+/*
+ * LEDs
+ */
+static struct gpio_led gpr_gpio_leds[] = {
+ { /* green */
+ .name = "gpr:green",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ { /* red */
+ .name = "gpr:red",
+ .gpio = 5,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led_platform_data gpr_led_data = {
+ .num_leds = ARRAY_SIZE(gpr_gpio_leds),
+ .leds = gpr_gpio_leds,
+};
+
+static struct platform_device gpr_led_devices = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpr_led_data,
+ }
+};
+
+/*
+ * I2C
+ */
+static struct i2c_gpio_platform_data gpr_i2c_data = {
+ .sda_pin = 209,
+ .sda_is_open_drain = 1,
+ .scl_pin = 210,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+ .timeout = HZ,
+};
+
+static struct platform_device gpr_i2c_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .dev.platform_data = &gpr_i2c_data,
+};
+
+static struct i2c_board_info gpr_i2c_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("lm83", 0x18),
+ .type = "lm83"
+ }
+};
+
+
+
+static struct resource alchemy_pci_host_res[] = {
+ [0] = {
+ .start = AU1500_PCI_PHYS_ADDR,
+ .end = AU1500_PCI_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static int gpr_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+ if ((slot == 0) && (pin == 1))
+ return AU1550_PCI_INTA;
+ else if ((slot == 0) && (pin == 2))
+ return AU1550_PCI_INTB;
+
+ return 0xff;
+}
+
+static struct alchemy_pci_platdata gpr_pci_pd = {
+ .board_map_irq = gpr_map_pci_irq,
+ .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
+ PCI_CONFIG_CH |
+#if defined(__MIPSEB__)
+ PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
+#else
+ 0,
+#endif
+};
+
+static struct platform_device gpr_pci_host_dev = {
+ .dev.platform_data = &gpr_pci_pd,
+ .name = "alchemy-pci",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(alchemy_pci_host_res),
+ .resource = alchemy_pci_host_res,
+};
+
+static struct platform_device *gpr_devices[] __initdata = {
+ &gpr_wdt_device,
+ &gpr_mtd_device,
+ &gpr_i2c_device,
+ &gpr_led_devices,
+};
+
+static int __init gpr_pci_init(void)
+{
+ return platform_device_register(&gpr_pci_host_dev);
+}
+/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */
+arch_initcall(gpr_pci_init);
+
+
+static int __init gpr_dev_init(void)
+{
+ i2c_register_board_info(0, gpr_i2c_info, ARRAY_SIZE(gpr_i2c_info));
+
+ return platform_add_devices(gpr_devices, ARRAY_SIZE(gpr_devices));
+}
+device_initcall(gpr_dev_init);
diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c
new file mode 100644
index 0000000..295f1a9
--- /dev/null
+++ b/arch/mips/alchemy/board-mtx1.c
@@ -0,0 +1,313 @@
+/*
+ * MTX-1 platform devices registration (Au1500)
+ *
+ * Copyright (C) 2007-2009, Florian Fainelli <florian@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <mtd/mtd-abi.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_eth.h>
+#include <prom.h>
+
+const char *get_system_type(void)
+{
+ return "MTX-1";
+}
+
+void __init prom_init(void)
+{
+ unsigned char *memsize_str;
+ unsigned long memsize;
+
+ prom_argc = fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
+
+ prom_init_cmdline();
+
+ memsize_str = prom_getenv("memsize");
+ if (!memsize_str)
+ memsize = 0x04000000;
+ else
+ strict_strtoul(memsize_str, 0, &memsize);
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
+
+void prom_putchar(unsigned char c)
+{
+ alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
+}
+
+static void mtx1_reset(char *c)
+{
+ /* Jump to the reset vector */
+ __asm__ __volatile__("jr\t%0" : : "r"(0xbfc00000));
+}
+
+static void mtx1_power_off(void)
+{
+ while (1)
+ asm volatile (
+ " .set mips32 \n"
+ " wait \n"
+ " .set mips0 \n");
+}
+
+void __init board_setup(void)
+{
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+ /* Enable USB power switch */
+ alchemy_gpio_direction_output(204, 0);
+#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
+
+ /* Initialize sys_pinfunc */
+ au_writel(SYS_PF_NI2, SYS_PINFUNC);
+
+ /* Initialize GPIO */
+ au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR);
+ alchemy_gpio_direction_output(0, 0); /* Disable M66EN (PCI 66MHz) */
+ alchemy_gpio_direction_output(3, 1); /* Disable PCI CLKRUN# */
+ alchemy_gpio_direction_output(1, 1); /* Enable EXT_IO3 */
+ alchemy_gpio_direction_output(5, 0); /* Disable eth PHY TX_ER */
+
+ /* Enable LED and set it to green */
+ alchemy_gpio_direction_output(211, 1); /* green on */
+ alchemy_gpio_direction_output(212, 0); /* red off */
+
+ pm_power_off = mtx1_power_off;
+ _machine_halt = mtx1_power_off;
+ _machine_restart = mtx1_reset;
+
+ printk(KERN_INFO "4G Systems MTX-1 Board\n");
+}
+
+/******************************************************************************/
+
+static struct gpio_keys_button mtx1_gpio_button[] = {
+ {
+ .gpio = 207,
+ .code = BTN_0,
+ .desc = "System button",
+ }
+};
+
+static struct gpio_keys_platform_data mtx1_buttons_data = {
+ .buttons = mtx1_gpio_button,
+ .nbuttons = ARRAY_SIZE(mtx1_gpio_button),
+};
+
+static struct platform_device mtx1_button = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &mtx1_buttons_data,
+ }
+};
+
+static struct resource mtx1_wdt_res[] = {
+ [0] = {
+ .start = 215,
+ .end = 215,
+ .name = "mtx1-wdt-gpio",
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device mtx1_wdt = {
+ .name = "mtx1-wdt",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mtx1_wdt_res),
+ .resource = mtx1_wdt_res,
+};
+
+static struct gpio_led default_leds[] = {
+ {
+ .name = "mtx1:green",
+ .gpio = 211,
+ }, {
+ .name = "mtx1:red",
+ .gpio = 212,
+ },
+};
+
+static struct gpio_led_platform_data mtx1_led_data = {
+ .num_leds = ARRAY_SIZE(default_leds),
+ .leds = default_leds,
+};
+
+static struct platform_device mtx1_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &mtx1_led_data,
+ }
+};
+
+static struct mtd_partition mtx1_mtd_partitions[] = {
+ {
+ .name = "filesystem",
+ .size = 0x01C00000,
+ .offset = 0,
+ },
+ {
+ .name = "yamon",
+ .size = 0x00100000,
+ .offset = MTDPART_OFS_APPEND,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "kernel",
+ .size = 0x002c0000,
+ .offset = MTDPART_OFS_APPEND,
+ },
+ {
+ .name = "yamon env",
+ .size = 0x00040000,
+ .offset = MTDPART_OFS_APPEND,
+ },
+};
+
+static struct physmap_flash_data mtx1_flash_data = {
+ .width = 4,
+ .nr_parts = 4,
+ .parts = mtx1_mtd_partitions,
+};
+
+static struct resource mtx1_mtd_resource = {
+ .start = 0x1e000000,
+ .end = 0x1fffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mtx1_mtd = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &mtx1_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &mtx1_mtd_resource,
+};
+
+static struct resource alchemy_pci_host_res[] = {
+ [0] = {
+ .start = AU1500_PCI_PHYS_ADDR,
+ .end = AU1500_PCI_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static int mtx1_pci_idsel(unsigned int devsel, int assert)
+{
+ /* This function is only necessary to support a proprietary Cardbus
+ * adapter on the mtx-1 "singleboard" variant. It triggers a custom
+ * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals.
+ */
+ if (assert && devsel != 0)
+ /* Suppress signal to Cardbus */
+ alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */
+ else
+ alchemy_gpio_set_value(1, 1); /* set EXT_IO3 ON */
+
+ udelay(1);
+ return 1;
+}
+
+static const char mtx1_irqtab[][5] = {
+ [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */
+ [1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
+ [2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */
+ [3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
+ [4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */
+ [5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
+ [6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */
+ [7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
+};
+
+static int mtx1_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+ return mtx1_irqtab[slot][pin];
+}
+
+static struct alchemy_pci_platdata mtx1_pci_pd = {
+ .board_map_irq = mtx1_map_pci_irq,
+ .board_pci_idsel = mtx1_pci_idsel,
+ .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
+ PCI_CONFIG_CH |
+#if defined(__MIPSEB__)
+ PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
+#else
+ 0,
+#endif
+};
+
+static struct platform_device mtx1_pci_host = {
+ .dev.platform_data = &mtx1_pci_pd,
+ .name = "alchemy-pci",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(alchemy_pci_host_res),
+ .resource = alchemy_pci_host_res,
+};
+
+static struct __initdata platform_device * mtx1_devs[] = {
+ &mtx1_pci_host,
+ &mtx1_gpio_leds,
+ &mtx1_wdt,
+ &mtx1_button,
+ &mtx1_mtd,
+};
+
+static struct au1000_eth_platform_data mtx1_au1000_eth0_pdata = {
+ .phy_search_highest_addr = 1,
+ .phy1_search_mac0 = 1,
+};
+
+static int __init mtx1_register_devices(void)
+{
+ int rc;
+
+ irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_HIGH);
+ irq_set_irq_type(AU1500_GPIO201_INT, IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(AU1500_GPIO202_INT, IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(AU1500_GPIO203_INT, IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW);
+
+ au1xxx_override_eth_cfg(0, &mtx1_au1000_eth0_pdata);
+
+ rc = gpio_request(mtx1_gpio_button[0].gpio,
+ mtx1_gpio_button[0].desc);
+ if (rc < 0) {
+ printk(KERN_INFO "mtx1: failed to request %d\n",
+ mtx1_gpio_button[0].gpio);
+ goto out;
+ }
+ gpio_direction_input(mtx1_gpio_button[0].gpio);
+out:
+ return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs));
+}
+arch_initcall(mtx1_register_devices);
diff --git a/arch/mips/alchemy/board-xxs1500.c b/arch/mips/alchemy/board-xxs1500.c
new file mode 100644
index 0000000..bd55136
--- /dev/null
+++ b/arch/mips/alchemy/board-xxs1500.c
@@ -0,0 +1,154 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * MyCable XXS1500 board support
+ *
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <prom.h>
+
+const char *get_system_type(void)
+{
+ return "XXS1500";
+}
+
+void __init prom_init(void)
+{
+ unsigned char *memsize_str;
+ unsigned long memsize;
+
+ prom_argc = fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
+
+ prom_init_cmdline();
+
+ memsize_str = prom_getenv("memsize");
+ if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
+ memsize = 0x04000000;
+
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
+
+void prom_putchar(unsigned char c)
+{
+ alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
+}
+
+static void xxs1500_reset(char *c)
+{
+ /* Jump to the reset vector */
+ __asm__ __volatile__("jr\t%0" : : "r"(0xbfc00000));
+}
+
+static void xxs1500_power_off(void)
+{
+ while (1)
+ asm volatile (
+ " .set mips32 \n"
+ " wait \n"
+ " .set mips0 \n");
+}
+
+void __init board_setup(void)
+{
+ u32 pin_func;
+
+ pm_power_off = xxs1500_power_off;
+ _machine_halt = xxs1500_power_off;
+ _machine_restart = xxs1500_reset;
+
+ alchemy_gpio1_input_enable();
+ alchemy_gpio2_enable();
+
+ /* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
+ pin_func |= SYS_PF_UR3;
+ au_writel(pin_func, SYS_PINFUNC);
+
+ /* Enable UART */
+ alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
+ /* Enable DTR (MCR bit 0) = USB power up */
+ __raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18));
+ wmb();
+}
+
+/******************************************************************************/
+
+static struct resource xxs1500_pcmcia_res[] = {
+ {
+ .name = "pcmcia-io",
+ .flags = IORESOURCE_MEM,
+ .start = AU1000_PCMCIA_IO_PHYS_ADDR,
+ .end = AU1000_PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1,
+ },
+ {
+ .name = "pcmcia-attr",
+ .flags = IORESOURCE_MEM,
+ .start = AU1000_PCMCIA_ATTR_PHYS_ADDR,
+ .end = AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ },
+ {
+ .name = "pcmcia-mem",
+ .flags = IORESOURCE_MEM,
+ .start = AU1000_PCMCIA_MEM_PHYS_ADDR,
+ .end = AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ },
+};
+
+static struct platform_device xxs1500_pcmcia_dev = {
+ .name = "xxs1500_pcmcia",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(xxs1500_pcmcia_res),
+ .resource = xxs1500_pcmcia_res,
+};
+
+static struct platform_device *xxs1500_devs[] __initdata = {
+ &xxs1500_pcmcia_dev,
+};
+
+static int __init xxs1500_dev_init(void)
+{
+ irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_HIGH);
+ irq_set_irq_type(AU1500_GPIO201_INT, IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(AU1500_GPIO202_INT, IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(AU1500_GPIO203_INT, IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(AU1500_GPIO207_INT, IRQ_TYPE_LEVEL_LOW);
+
+ irq_set_irq_type(AU1500_GPIO0_INT, IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(AU1500_GPIO1_INT, IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(AU1500_GPIO2_INT, IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(AU1500_GPIO3_INT, IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(AU1500_GPIO4_INT, IRQ_TYPE_LEVEL_LOW); /* CF irq */
+ irq_set_irq_type(AU1500_GPIO5_INT, IRQ_TYPE_LEVEL_LOW);
+
+ return platform_add_devices(xxs1500_devs,
+ ARRAY_SIZE(xxs1500_devs));
+}
+device_initcall(xxs1500_dev_init);
diff --git a/arch/mips/alchemy/gpr/Makefile b/arch/mips/alchemy/gpr/Makefile
deleted file mode 100644
index cb73fe2..0000000
--- a/arch/mips/alchemy/gpr/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Copyright 2003 MontaVista Software Inc.
-# Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
-#
-# Makefile for Trapeze ITS GPR board.
-#
-
-obj-y += board_setup.o init.o platform.o
diff --git a/arch/mips/alchemy/gpr/board_setup.c b/arch/mips/alchemy/gpr/board_setup.c
deleted file mode 100644
index dea45c7..0000000
--- a/arch/mips/alchemy/gpr/board_setup.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Copyright 2010 Wolfgang Grandegger <wg@xxxxxxx>
- *
- * Copyright 2000-2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-
-#include <asm/reboot.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#include <prom.h>
-
-static void gpr_reset(char *c)
-{
- /* switch System-LED to orange (red# and green# on) */
- alchemy_gpio_direction_output(4, 0);
- alchemy_gpio_direction_output(5, 0);
-
- /* trigger watchdog to reset board in 200ms */
- printk(KERN_EMERG "Triggering watchdog soft reset...\n");
- raw_local_irq_disable();
- alchemy_gpio_direction_output(1, 0);
- udelay(1);
- alchemy_gpio_set_value(1, 1);
- while (1)
- cpu_wait();
-}
-
-static void gpr_power_off(void)
-{
- while (1)
- cpu_wait();
-}
-
-void __init board_setup(void)
-{
- printk(KERN_INFO "Trapeze ITS GPR board\n");
-
- pm_power_off = gpr_power_off;
- _machine_halt = gpr_power_off;
- _machine_restart = gpr_reset;
-
- /* Enable UART1/3 */
- alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
- alchemy_uart_enable(AU1000_UART1_PHYS_ADDR);
-
- /* Take away Reset of UMTS-card */
- alchemy_gpio_direction_output(215, 1);
-}
diff --git a/arch/mips/alchemy/gpr/init.c b/arch/mips/alchemy/gpr/init.c
deleted file mode 100644
index 229aafa..0000000
--- a/arch/mips/alchemy/gpr/init.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright 2010 Wolfgang Grandegger <wg@xxxxxxx>
- *
- * Copyright 2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <asm/bootinfo.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
- return "GPR";
-}
-
-void __init prom_init(void)
-{
- unsigned char *memsize_str;
- unsigned long memsize;
-
- prom_argc = fw_arg0;
- prom_argv = (char **)fw_arg1;
- prom_envp = (char **)fw_arg2;
-
- prom_init_cmdline();
-
- memsize_str = prom_getenv("memsize");
- if (!memsize_str)
- memsize = 0x04000000;
- else
- strict_strtoul(memsize_str, 0, &memsize);
- add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
-void prom_putchar(unsigned char c)
-{
- alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
-}
diff --git a/arch/mips/alchemy/gpr/platform.c b/arch/mips/alchemy/gpr/platform.c
deleted file mode 100644
index 982ce85..0000000
--- a/arch/mips/alchemy/gpr/platform.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * GPR board platform device registration
- *
- * Copyright (C) 2010 Wolfgang Grandegger <wg@xxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-/*
- * Watchdog
- */
-static struct resource gpr_wdt_resource[] = {
- [0] = {
- .start = 1,
- .end = 1,
- .name = "gpr-adm6320-wdt",
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device gpr_wdt_device = {
- .name = "adm6320-wdt",
- .id = 0,
- .num_resources = ARRAY_SIZE(gpr_wdt_resource),
- .resource = gpr_wdt_resource,
-};
-
-/*
- * FLASH
- *
- * 0x00000000-0x00200000 : "kernel"
- * 0x00200000-0x00a00000 : "rootfs"
- * 0x01d00000-0x01f00000 : "config"
- * 0x01c00000-0x01d00000 : "yamon"
- * 0x01d00000-0x01d40000 : "yamon env vars"
- * 0x00000000-0x00a00000 : "kernel+rootfs"
- */
-static struct mtd_partition gpr_mtd_partitions[] = {
- {
- .name = "kernel",
- .size = 0x00200000,
- .offset = 0,
- },
- {
- .name = "rootfs",
- .size = 0x00800000,
- .offset = MTDPART_OFS_APPEND,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "config",
- .size = 0x00200000,
- .offset = 0x01d00000,
- },
- {
- .name = "yamon",
- .size = 0x00100000,
- .offset = 0x01c00000,
- },
- {
- .name = "yamon env vars",
- .size = 0x00040000,
- .offset = MTDPART_OFS_APPEND,
- },
- {
- .name = "kernel+rootfs",
- .size = 0x00a00000,
- .offset = 0,
- },
-};
-
-static struct physmap_flash_data gpr_flash_data = {
- .width = 4,
- .nr_parts = ARRAY_SIZE(gpr_mtd_partitions),
- .parts = gpr_mtd_partitions,
-};
-
-static struct resource gpr_mtd_resource = {
- .start = 0x1e000000,
- .end = 0x1fffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device gpr_mtd_device = {
- .name = "physmap-flash",
- .dev = {
- .platform_data = &gpr_flash_data,
- },
- .num_resources = 1,
- .resource = &gpr_mtd_resource,
-};
-
-/*
- * LEDs
- */
-static struct gpio_led gpr_gpio_leds[] = {
- { /* green */
- .name = "gpr:green",
- .gpio = 4,
- .active_low = 1,
- },
- { /* red */
- .name = "gpr:red",
- .gpio = 5,
- .active_low = 1,
- }
-};
-
-static struct gpio_led_platform_data gpr_led_data = {
- .num_leds = ARRAY_SIZE(gpr_gpio_leds),
- .leds = gpr_gpio_leds,
-};
-
-static struct platform_device gpr_led_devices = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &gpr_led_data,
- }
-};
-
-/*
- * I2C
- */
-static struct i2c_gpio_platform_data gpr_i2c_data = {
- .sda_pin = 209,
- .sda_is_open_drain = 1,
- .scl_pin = 210,
- .scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
- .timeout = HZ,
- };
-
-static struct platform_device gpr_i2c_device = {
- .name = "i2c-gpio",
- .id = -1,
- .dev.platform_data = &gpr_i2c_data,
-};
-
-static struct i2c_board_info gpr_i2c_info[] __initdata = {
- {
- I2C_BOARD_INFO("lm83", 0x18),
- .type = "lm83"
- }
-};
-
-
-
-static struct resource alchemy_pci_host_res[] = {
- [0] = {
- .start = AU1500_PCI_PHYS_ADDR,
- .end = AU1500_PCI_PHYS_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int gpr_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
-{
- if ((slot == 0) && (pin == 1))
- return AU1550_PCI_INTA;
- else if ((slot == 0) && (pin == 2))
- return AU1550_PCI_INTB;
-
- return -1;
-}
-
-static struct alchemy_pci_platdata gpr_pci_pd = {
- .board_map_irq = gpr_map_pci_irq,
- .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
- PCI_CONFIG_CH |
-#if defined(__MIPSEB__)
- PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
-#else
- 0,
-#endif
-};
-
-static struct platform_device gpr_pci_host_dev = {
- .dev.platform_data = &gpr_pci_pd,
- .name = "alchemy-pci",
- .id = 0,
- .num_resources = ARRAY_SIZE(alchemy_pci_host_res),
- .resource = alchemy_pci_host_res,
-};
-
-static struct platform_device *gpr_devices[] __initdata = {
- &gpr_wdt_device,
- &gpr_mtd_device,
- &gpr_i2c_device,
- &gpr_led_devices,
-};
-
-static int __init gpr_pci_init(void)
-{
- return platform_device_register(&gpr_pci_host_dev);
-}
-/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */
-arch_initcall(gpr_pci_init);
-
-
-static int __init gpr_dev_init(void)
-{
- i2c_register_board_info(0, gpr_i2c_info, ARRAY_SIZE(gpr_i2c_info));
-
- return platform_add_devices(gpr_devices, ARRAY_SIZE(gpr_devices));
-}
-device_initcall(gpr_dev_init);
diff --git a/arch/mips/alchemy/mtx-1/Makefile b/arch/mips/alchemy/mtx-1/Makefile
deleted file mode 100644
index 81b540c..0000000
--- a/arch/mips/alchemy/mtx-1/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Copyright 2003 MontaVista Software Inc.
-# Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
-# Bruno Randolf <bruno.randolf@xxxxxxxxxxxxxx>
-#
-# Makefile for 4G Systems MTX-1 board.
-#
-
-obj-y += init.o board_setup.o platform.o
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
deleted file mode 100644
index 851a5ab..0000000
--- a/arch/mips/alchemy/mtx-1/board_setup.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * 4G Systems MTX-1 board setup.
- *
- * Copyright 2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
- * Bruno Randolf <bruno.randolf@xxxxxxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
-
-#include <asm/reboot.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#include <prom.h>
-
-static void mtx1_reset(char *c)
-{
- /* Jump to the reset vector */
- __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-static void mtx1_power_off(void)
-{
- while (1)
- asm volatile (
- " .set mips32 \n"
- " wait \n"
- " .set mips0 \n");
-}
-
-void __init board_setup(void)
-{
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- /* Enable USB power switch */
- alchemy_gpio_direction_output(204, 0);
-#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
-
- /* Initialize sys_pinfunc */
- au_writel(SYS_PF_NI2, SYS_PINFUNC);
-
- /* Initialize GPIO */
- au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR);
- alchemy_gpio_direction_output(0, 0); /* Disable M66EN (PCI 66MHz) */
- alchemy_gpio_direction_output(3, 1); /* Disable PCI CLKRUN# */
- alchemy_gpio_direction_output(1, 1); /* Enable EXT_IO3 */
- alchemy_gpio_direction_output(5, 0); /* Disable eth PHY TX_ER */
-
- /* Enable LED and set it to green */
- alchemy_gpio_direction_output(211, 1); /* green on */
- alchemy_gpio_direction_output(212, 0); /* red off */
-
- pm_power_off = mtx1_power_off;
- _machine_halt = mtx1_power_off;
- _machine_restart = mtx1_reset;
-
- printk(KERN_INFO "4G Systems MTX-1 Board\n");
-}
-
-static int __init mtx1_init_irq(void)
-{
- irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
- irq_set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
- irq_set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
- irq_set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
- irq_set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
-
- return 0;
-}
-arch_initcall(mtx1_init_irq);
diff --git a/arch/mips/alchemy/mtx-1/init.c b/arch/mips/alchemy/mtx-1/init.c
deleted file mode 100644
index 2e81cc7..0000000
--- a/arch/mips/alchemy/mtx-1/init.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * 4G Systems MTX-1 board setup
- *
- * Copyright 2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
- * Bruno Randolf <bruno.randolf@xxxxxxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
- return "MTX-1";
-}
-
-void __init prom_init(void)
-{
- unsigned char *memsize_str;
- unsigned long memsize;
-
- prom_argc = fw_arg0;
- prom_argv = (char **)fw_arg1;
- prom_envp = (char **)fw_arg2;
-
- prom_init_cmdline();
-
- memsize_str = prom_getenv("memsize");
- if (!memsize_str)
- memsize = 0x04000000;
- else
- strict_strtoul(memsize_str, 0, &memsize);
- add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
-void prom_putchar(unsigned char c)
-{
- alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
-}
diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c
deleted file mode 100644
index cc47b68..0000000
--- a/arch/mips/alchemy/mtx-1/platform.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * MTX-1 platform devices registration
- *
- * Copyright (C) 2007-2009, Florian Fainelli <florian@xxxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <mtd/mtd-abi.h>
-
-#include <asm/mach-au1x00/au1xxx_eth.h>
-
-static struct gpio_keys_button mtx1_gpio_button[] = {
- {
- .gpio = 207,
- .code = BTN_0,
- .desc = "System button",
- }
-};
-
-static struct gpio_keys_platform_data mtx1_buttons_data = {
- .buttons = mtx1_gpio_button,
- .nbuttons = ARRAY_SIZE(mtx1_gpio_button),
-};
-
-static struct platform_device mtx1_button = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &mtx1_buttons_data,
- }
-};
-
-static struct resource mtx1_wdt_res[] = {
- [0] = {
- .start = 215,
- .end = 215,
- .name = "mtx1-wdt-gpio",
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device mtx1_wdt = {
- .name = "mtx1-wdt",
- .id = 0,
- .num_resources = ARRAY_SIZE(mtx1_wdt_res),
- .resource = mtx1_wdt_res,
-};
-
-static struct gpio_led default_leds[] = {
- {
- .name = "mtx1:green",
- .gpio = 211,
- }, {
- .name = "mtx1:red",
- .gpio = 212,
- },
-};
-
-static struct gpio_led_platform_data mtx1_led_data = {
- .num_leds = ARRAY_SIZE(default_leds),
- .leds = default_leds,
-};
-
-static struct platform_device mtx1_gpio_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &mtx1_led_data,
- }
-};
-
-static struct mtd_partition mtx1_mtd_partitions[] = {
- {
- .name = "filesystem",
- .size = 0x01C00000,
- .offset = 0,
- },
- {
- .name = "yamon",
- .size = 0x00100000,
- .offset = MTDPART_OFS_APPEND,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "kernel",
- .size = 0x002c0000,
- .offset = MTDPART_OFS_APPEND,
- },
- {
- .name = "yamon env",
- .size = 0x00040000,
- .offset = MTDPART_OFS_APPEND,
- },
-};
-
-static struct physmap_flash_data mtx1_flash_data = {
- .width = 4,
- .nr_parts = 4,
- .parts = mtx1_mtd_partitions,
-};
-
-static struct resource mtx1_mtd_resource = {
- .start = 0x1e000000,
- .end = 0x1fffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device mtx1_mtd = {
- .name = "physmap-flash",
- .dev = {
- .platform_data = &mtx1_flash_data,
- },
- .num_resources = 1,
- .resource = &mtx1_mtd_resource,
-};
-
-static struct resource alchemy_pci_host_res[] = {
- [0] = {
- .start = AU1500_PCI_PHYS_ADDR,
- .end = AU1500_PCI_PHYS_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static int mtx1_pci_idsel(unsigned int devsel, int assert)
-{
- /* This function is only necessary to support a proprietary Cardbus
- * adapter on the mtx-1 "singleboard" variant. It triggers a custom
- * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals.
- */
- if (assert && devsel != 0)
- /* Suppress signal to Cardbus */
- alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */
- else
- alchemy_gpio_set_value(1, 1); /* set EXT_IO3 ON */
-
- udelay(1);
- return 1;
-}
-
-static const char mtx1_irqtab[][5] = {
- [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */
- [1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
- [2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */
- [3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
- [4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */
- [5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
- [6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */
- [7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
-};
-
-static int mtx1_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
-{
- return mtx1_irqtab[slot][pin];
-}
-
-static struct alchemy_pci_platdata mtx1_pci_pd = {
- .board_map_irq = mtx1_map_pci_irq,
- .board_pci_idsel = mtx1_pci_idsel,
- .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
- PCI_CONFIG_CH |
-#if defined(__MIPSEB__)
- PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
-#else
- 0,
-#endif
-};
-
-static struct platform_device mtx1_pci_host = {
- .dev.platform_data = &mtx1_pci_pd,
- .name = "alchemy-pci",
- .id = 0,
- .num_resources = ARRAY_SIZE(alchemy_pci_host_res),
- .resource = alchemy_pci_host_res,
-};
-
-
-static struct __initdata platform_device * mtx1_devs[] = {
- &mtx1_pci_host,
- &mtx1_gpio_leds,
- &mtx1_wdt,
- &mtx1_button,
- &mtx1_mtd,
-};
-
-static struct au1000_eth_platform_data mtx1_au1000_eth0_pdata = {
- .phy_search_highest_addr = 1,
- .phy1_search_mac0 = 1,
-};
-
-static int __init mtx1_register_devices(void)
-{
- int rc;
-
- au1xxx_override_eth_cfg(0, &mtx1_au1000_eth0_pdata);
-
- rc = gpio_request(mtx1_gpio_button[0].gpio,
- mtx1_gpio_button[0].desc);
- if (rc < 0) {
- printk(KERN_INFO "mtx1: failed to request %d\n",
- mtx1_gpio_button[0].gpio);
- goto out;
- }
- gpio_direction_input(mtx1_gpio_button[0].gpio);
-out:
- return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs));
-}
-
-arch_initcall(mtx1_register_devices);
diff --git a/arch/mips/alchemy/xxs1500/Makefile b/arch/mips/alchemy/xxs1500/Makefile
deleted file mode 100644
index 91defcf..0000000
--- a/arch/mips/alchemy/xxs1500/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Copyright 2003 MontaVista Software Inc.
-# Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
-#
-# Makefile for MyCable XXS1500 board.
-#
-
-obj-y += init.o board_setup.o platform.o
diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c
deleted file mode 100644
index 3fa83f7..0000000
--- a/arch/mips/alchemy/xxs1500/board_setup.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Copyright 2000-2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-
-#include <asm/reboot.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#include <prom.h>
-
-static void xxs1500_reset(char *c)
-{
- /* Jump to the reset vector */
- __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-static void xxs1500_power_off(void)
-{
- while (1)
- asm volatile (
- " .set mips32 \n"
- " wait \n"
- " .set mips0 \n");
-}
-
-void __init board_setup(void)
-{
- u32 pin_func;
-
- pm_power_off = xxs1500_power_off;
- _machine_halt = xxs1500_power_off;
- _machine_restart = xxs1500_reset;
-
- alchemy_gpio1_input_enable();
- alchemy_gpio2_enable();
-
- /* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */
- pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
- pin_func |= SYS_PF_UR3;
- au_writel(pin_func, SYS_PINFUNC);
-
- /* Enable UART */
- alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
- /* Enable DTR (MCR bit 0) = USB power up */
- __raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18));
- wmb();
-}
-
-static int __init xxs1500_init_irq(void)
-{
- irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
- irq_set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
- irq_set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
- irq_set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
- irq_set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
- irq_set_irq_type(AU1500_GPIO207_INT, IRQF_TRIGGER_LOW);
-
- irq_set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW);
- irq_set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW);
- irq_set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW);
- irq_set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW);
- irq_set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* CF irq */
- irq_set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW);
-
- return 0;
-}
-arch_initcall(xxs1500_init_irq);
diff --git a/arch/mips/alchemy/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c
deleted file mode 100644
index 0ee02cf..0000000
--- a/arch/mips/alchemy/xxs1500/init.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * XXS1500 board setup
- *
- * Copyright 2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@xxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <asm/bootinfo.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
- return "XXS1500";
-}
-
-void __init prom_init(void)
-{
- unsigned char *memsize_str;
- unsigned long memsize;
-
- prom_argc = fw_arg0;
- prom_argv = (char **)fw_arg1;
- prom_envp = (char **)fw_arg2;
-
- prom_init_cmdline();
-
- memsize_str = prom_getenv("memsize");
- if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
- memsize = 0x04000000;
-
- add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
-void prom_putchar(unsigned char c)
-{
- alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
-}
diff --git a/arch/mips/alchemy/xxs1500/platform.c b/arch/mips/alchemy/xxs1500/platform.c
deleted file mode 100644
index 06a3a45..0000000
--- a/arch/mips/alchemy/xxs1500/platform.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * XXS1500 board platform device registration
- *
- * Copyright (C) 2009 Manuel Lauss
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-static struct resource xxs1500_pcmcia_res[] = {
- {
- .name = "pcmcia-io",
- .flags = IORESOURCE_MEM,
- .start = AU1000_PCMCIA_IO_PHYS_ADDR,
- .end = AU1000_PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1,
- },
- {
- .name = "pcmcia-attr",
- .flags = IORESOURCE_MEM,
- .start = AU1000_PCMCIA_ATTR_PHYS_ADDR,
- .end = AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
- },
- {
- .name = "pcmcia-mem",
- .flags = IORESOURCE_MEM,
- .start = AU1000_PCMCIA_MEM_PHYS_ADDR,
- .end = AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
- },
-};
-
-static struct platform_device xxs1500_pcmcia_dev = {
- .name = "xxs1500_pcmcia",
- .id = -1,
- .num_resources = ARRAY_SIZE(xxs1500_pcmcia_res),
- .resource = xxs1500_pcmcia_res,
-};
-
-static struct platform_device *xxs1500_devs[] __initdata = {
- &xxs1500_pcmcia_dev,
-};
-
-static int __init xxs1500_dev_init(void)
-{
- return platform_add_devices(xxs1500_devs,
- ARRAY_SIZE(xxs1500_devs));
-}
-device_initcall(xxs1500_dev_init);
--
1.7.7.1
