Re: [PATCH 1/2] MIPS: Add basic support for Loongson1B (UPDATED)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Sep 24, 2011 at 2:21 PM,  <keguang.zhang@xxxxxxxxx> wrote:
> From: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
>
> This patch adds basic support for Loongson1B
> including serial port, timer and interrupt handler.
>
> Loongson 1B is a 32-bit SoC designed by Institute of
> Computing Technology (ICT), Chinese Academy of Sciences (CAS),
> which implements the MIPS32 release 2 instruction set.
>
> Signed-off-by: Kelvin Cheung <keguang.zhang@xxxxxxxxx>
> ---
>  arch/mips/Kbuild.platforms                       |    1 +
>  arch/mips/Kconfig                                |   31 ++++
>  arch/mips/include/asm/cpu.h                      |    3 +-
>  arch/mips/include/asm/mach-loongson1/irq.h       |   70 +++++++++
>  arch/mips/include/asm/mach-loongson1/loongson1.h |   48 +++++++
>  arch/mips/include/asm/mach-loongson1/platform.h  |   20 +++
>  arch/mips/include/asm/mach-loongson1/prom.h      |   24 +++
>  arch/mips/include/asm/mach-loongson1/regs-clk.h  |   32 ++++
>  arch/mips/include/asm/mach-loongson1/regs-intc.h |   25 ++++
>  arch/mips/include/asm/mach-loongson1/regs-wdt.h  |   21 +++
>  arch/mips/include/asm/mach-loongson1/war.h       |   25 ++++
>  arch/mips/include/asm/module.h                   |    2 +
>  arch/mips/kernel/cpu-probe.c                     |   15 ++
>  arch/mips/kernel/perf_event_mipsxx.c             |    6 +
>  arch/mips/kernel/traps.c                         |    1 +
>  arch/mips/loongson1/Kconfig                      |   21 +++
>  arch/mips/loongson1/Makefile                     |   11 ++
>  arch/mips/loongson1/Platform                     |    7 +
>  arch/mips/loongson1/common/Makefile              |    5 +
>  arch/mips/loongson1/common/clock.c               |  165 ++++++++++++++++++++++
>  arch/mips/loongson1/common/irq.c                 |  136 ++++++++++++++++++
>  arch/mips/loongson1/common/platform.c            |   50 +++++++
>  arch/mips/loongson1/common/prom.c                |   88 ++++++++++++
>  arch/mips/loongson1/common/reset.c               |   46 ++++++
>  arch/mips/loongson1/common/setup.c               |   29 ++++
>  arch/mips/loongson1/ls1b/Makefile                |    5 +
>  arch/mips/loongson1/ls1b/board.c                 |   30 ++++
>  arch/mips/oprofile/common.c                      |    1 +
>  arch/mips/oprofile/op_model_mipsxx.c             |    4 +
>  29 files changed, 921 insertions(+), 1 deletions(-)
>  create mode 100644 arch/mips/include/asm/mach-loongson1/irq.h
>  create mode 100644 arch/mips/include/asm/mach-loongson1/loongson1.h
>  create mode 100644 arch/mips/include/asm/mach-loongson1/platform.h
>  create mode 100644 arch/mips/include/asm/mach-loongson1/prom.h
>  create mode 100644 arch/mips/include/asm/mach-loongson1/regs-clk.h
>  create mode 100644 arch/mips/include/asm/mach-loongson1/regs-intc.h
>  create mode 100644 arch/mips/include/asm/mach-loongson1/regs-wdt.h
>  create mode 100644 arch/mips/include/asm/mach-loongson1/war.h
>  create mode 100644 arch/mips/loongson1/Kconfig
>  create mode 100644 arch/mips/loongson1/Makefile
>  create mode 100644 arch/mips/loongson1/Platform
>  create mode 100644 arch/mips/loongson1/common/Makefile
>  create mode 100644 arch/mips/loongson1/common/clock.c
>  create mode 100644 arch/mips/loongson1/common/irq.c
>  create mode 100644 arch/mips/loongson1/common/platform.c
>  create mode 100644 arch/mips/loongson1/common/prom.c
>  create mode 100644 arch/mips/loongson1/common/reset.c
>  create mode 100644 arch/mips/loongson1/common/setup.c
>  create mode 100644 arch/mips/loongson1/ls1b/Makefile
>  create mode 100644 arch/mips/loongson1/ls1b/board.c
>
> diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
> index 5ce8029..d64786d 100644
> --- a/arch/mips/Kbuild.platforms
> +++ b/arch/mips/Kbuild.platforms
> @@ -14,6 +14,7 @@ platforms += jz4740
>  platforms += lantiq
>  platforms += lasat
>  platforms += loongson
> +platforms += loongson1
>  platforms += mipssim
>  platforms += mti-malta
>  platforms += netlogic
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index d9b8ea8..4c6ad4f 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -262,6 +262,17 @@ config MACH_LOONGSON
>          Chinese Academy of Sciences (CAS) in the People's Republic
>          of China. The chief architect is Professor Weiwu Hu.
>
> +config MACH_LOONGSON1
> +       bool "Loongson1 family of machines"
> +       select SYS_SUPPORTS_ZBOOT
> +       help
> +         This enables the support of Loongson1 family of machines.
> +
> +         Loongson1 is a family of 32-bit MIPS-compatible SoCs.
> +         developed at Institute of Computing Technology (ICT),
> +         Chinese Academy of Sciences (CAS) in the People's Republic
> +         of China.
> +
>  config MIPS_MALTA
>        bool "MIPS Malta board"
>        select ARCH_MAY_HAVE_PC_FDC
> @@ -808,6 +819,7 @@ source "arch/mips/txx9/Kconfig"
>  source "arch/mips/vr41xx/Kconfig"
>  source "arch/mips/cavium-octeon/Kconfig"
>  source "arch/mips/loongson/Kconfig"
> +source "arch/mips/loongson1/Kconfig"
>  source "arch/mips/netlogic/Kconfig"
>
>  endmenu
> @@ -1201,6 +1213,14 @@ config CPU_LOONGSON2F
>          have a similar programming interface with FPGA northbridge used in
>          Loongson2E.
>
> +config CPU_LOONGSON1B
> +       bool "Loongson 1B"
> +       depends on SYS_HAS_CPU_LOONGSON1B
> +       select CPU_LOONGSON1
> +       help
> +         The Loongson 1B is a 32-bit SoC, which implements the MIPS32
> +         release 2 instruction set.
> +
>  config CPU_MIPS32_R1
>        bool "MIPS32 Release 1"
>        depends on SYS_HAS_CPU_MIPS32_R1
> @@ -1529,6 +1549,14 @@ config CPU_LOONGSON2
>        select CPU_SUPPORTS_64BIT_KERNEL
>        select CPU_SUPPORTS_HIGHMEM
>
> +config CPU_LOONGSON1
> +       bool
> +       select CPU_MIPS32
> +       select CPU_MIPSR2
> +       select CPU_HAS_PREFETCH
> +       select CPU_SUPPORTS_32BIT_KERNEL
> +       select CPU_SUPPORTS_HIGHMEM
> +
>  config SYS_HAS_CPU_LOONGSON2E
>        bool
>
> @@ -1538,6 +1566,9 @@ config SYS_HAS_CPU_LOONGSON2F
>        select CPU_SUPPORTS_ADDRWINCFG if 64BIT
>        select CPU_SUPPORTS_UNCACHED_ACCELERATED
>
> +config SYS_HAS_CPU_LOONGSON1B
> +       bool
> +
>  config SYS_HAS_CPU_MIPS32_R1
>        bool
>
> diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
> index 5f95a4b..975f372 100644
> --- a/arch/mips/include/asm/cpu.h
> +++ b/arch/mips/include/asm/cpu.h
> @@ -191,6 +191,7 @@
>  #define PRID_REV_34K_V1_0_2    0x0022
>  #define PRID_REV_LOONGSON2E    0x0002
>  #define PRID_REV_LOONGSON2F    0x0003
> +#define PRID_REV_LOONGSON1B    0x0020
>
>  /*
>  * Older processors used to encode processor version and revision in two
> @@ -253,7 +254,7 @@ enum cpu_type_enum {
>         */
>        CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
>        CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350,
> -       CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC,
> +       CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_LOONGSON1,
>
>        /*
>         * MIPS64 class processors
> diff --git a/arch/mips/include/asm/mach-loongson1/irq.h b/arch/mips/include/asm/mach-loongson1/irq.h
> new file mode 100644
> index 0000000..e8fed7a
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/irq.h
> @@ -0,0 +1,70 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * IRQ mappings for Loongson1.
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +
> +#ifndef __ASM_MACH_LOONGSON1_IRQ_H
> +#define __ASM_MACH_LOONGSON1_IRQ_H
> +
> +/*
> + * CPU core Interrupt Numbers
> + */
> +#define MIPS_CPU_IRQ_BASE              0
> +#define MIPS_CPU_IRQ(x)                        (MIPS_CPU_IRQ_BASE + (x))
> +#define SOFTINT0_IRQ                   MIPS_CPU_IRQ(0)
> +#define SOFTINT1_IRQ                   MIPS_CPU_IRQ(1)
> +#define INT0_IRQ                       MIPS_CPU_IRQ(2)
> +#define INT1_IRQ                       MIPS_CPU_IRQ(3)
> +#define INT2_IRQ                       MIPS_CPU_IRQ(4)
> +#define INT3_IRQ                       MIPS_CPU_IRQ(5)
> +#define INT4_IRQ                       MIPS_CPU_IRQ(6)
> +#define TIMER_IRQ                      MIPS_CPU_IRQ(7)         /* cpu timer */
> +
> +/*
> + * INT0~3 Interrupt Numbers
> + */
> +#define LOONGSON1_IRQ_BASE             8
> +#define LOONGSON1_IRQ(n, x)            (LOONGSON1_IRQ_BASE + (n << 5) + (x))
> +
> +#define LOONGSON1_UART0_IRQ            LOONGSON1_IRQ(0, 2)
> +#define LOONGSON1_UART1_IRQ            LOONGSON1_IRQ(0, 3)
> +#define LOONGSON1_UART2_IRQ            LOONGSON1_IRQ(0, 4)
> +#define LOONGSON1_UART3_IRQ            LOONGSON1_IRQ(0, 5)
> +#define LOONGSON1_CAN0_IRQ             LOONGSON1_IRQ(0, 6)
> +#define LOONGSON1_CAN1_IRQ             LOONGSON1_IRQ(0, 7)
> +#define LOONGSON1_SPI0_IRQ             LOONGSON1_IRQ(0, 8)
> +#define LOONGSON1_SPI1_IRQ             LOONGSON1_IRQ(0, 9)
> +#define LOONGSON1_AC97_IRQ             LOONGSON1_IRQ(0, 10)
> +#define LOONGSON1_DMA0_IRQ             LOONGSON1_IRQ(0, 13)
> +#define LOONGSON1_DMA1_IRQ             LOONGSON1_IRQ(0, 14)
> +#define LOONGSON1_DMA2_IRQ             LOONGSON1_IRQ(0, 15)
> +#define LOONGSON1_PWM0_IRQ             LOONGSON1_IRQ(0, 17)
> +#define LOONGSON1_PWM1_IRQ             LOONGSON1_IRQ(0, 18)
> +#define LOONGSON1_PWM2_IRQ             LOONGSON1_IRQ(0, 19)
> +#define LOONGSON1_PWM3_IRQ             LOONGSON1_IRQ(0, 20)
> +#define LOONGSON1_RTC_INT0_IRQ         LOONGSON1_IRQ(0, 21)
> +#define LOONGSON1_RTC_INT1_IRQ         LOONGSON1_IRQ(0, 22)
> +#define LOONGSON1_RTC_INT2_IRQ         LOONGSON1_IRQ(0, 23)
> +#define LOONGSON1_TOY_INT0_IRQ         LOONGSON1_IRQ(0, 24)
> +#define LOONGSON1_TOY_INT1_IRQ         LOONGSON1_IRQ(0, 25)
> +#define LOONGSON1_TOY_INT2_IRQ         LOONGSON1_IRQ(0, 26)
> +#define LOONGSON1_RTC_TICK_IRQ         LOONGSON1_IRQ(0, 27)
> +#define LOONGSON1_TOY_TICK_IRQ         LOONGSON1_IRQ(0, 28)
> +#define LOONGSON1_UART4_IRQ            LOONGSON1_IRQ(0, 29)
> +#define LOONGSON1_UART5_IRQ            LOONGSON1_IRQ(0, 30)
> +
> +#define LOONGSON1_OHCI_IRQ             LOONGSON1_IRQ(1, 0)
> +#define LOONGSON1_EHCI_IRQ             LOONGSON1_IRQ(1, 1)
> +#define LOONGSON1_GMAC0_IRQ            LOONGSON1_IRQ(1, 2)
> +#define LOONGSON1_GMAC1_IRQ            LOONGSON1_IRQ(1, 3)
> +
> +#define NR_IRQS                                LOONGSON1_GMAC1_IRQ

Are you using TAB above?

> +
> +#endif /* __ASM_MACH_LOONGSON1_IRQ_H */
> diff --git a/arch/mips/include/asm/mach-loongson1/loongson1.h b/arch/mips/include/asm/mach-loongson1/loongson1.h
> new file mode 100644
> index 0000000..466136d
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/loongson1.h
> @@ -0,0 +1,48 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * Register mappings for Loongson1.
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +
> +#ifndef __ASM_MACH_LOONGSON1_LOONGSON1_H
> +#define __ASM_MACH_LOONGSON1_LOONGSON1_H
> +
> +#define DEFAULT_MEMSIZE                        (256)   /* If no memsize provided */
> +
> +/* Loongson1 Register Bases */
> +/* All regs are accessed in KSEG1 */
> +#define LOONGSON1_REGBASE              (0xa0000000ul + 0x1fe00000ul)
> +
> +#define LOONGSON1_INTC_BASE            (0xbfd01040)
> +#define LOONGSON1_USB_BASE             (0xbfe00000)
> +#define LOONGSON1_GMAC0_BASE           (0xbfe10000)
> +#define LOONGSON1_GMAC1_BASE           (0xbfe20000)
> +#define LOONGSON1_UART0_BASE           (0xbfe40000)
> +#define LOONGSON1_UART1_BASE           (0xbfe44000)
> +#define LOONGSON1_UART2_BASE           (0xbfe48000)
> +#define LOONGSON1_UART3_BASE           (0xbfe4c000)
> +#define LOONGSON1_UART4_BASE           (0xbfe6c000)
> +#define LOONGSON1_UART5_BASE           (0xbfe7c000)
> +#define LOONGSON1_CAN0_BASE            (0xbfe50000)
> +#define LOONGSON1_CAN1_BASE            (0xbfe54000)
> +#define LOONGSON1_I2C0_BASE            (0xbfe58000)
> +#define LOONGSON1_I2C1_BASE            (0xbfe68000)
> +#define LOONGSON1_I2C2_BASE            (0xbfe70000)
> +#define LOONGSON1_PWM_BASE             (0xbfe5c000)
> +#define LOONGSON1_WDT_BASE             (0xbfe5c060)
> +#define LOONGSON1_RTC_BASE             (0xbfe64000)
> +#define LOONGSON1_AC97_BASE            (0xbfe74000)
> +#define LOONGSON1_NAND_BASE            (0xbfe78000)
> +#define LOONGSON1_CLK_BASE             (0xbfe78030)
> +
> +#include <regs-clk.h>
> +#include <regs-intc.h>
> +#include <regs-wdt.h>
> +
> +#endif /* __ASM_MACH_LOONGSON1_LOONGSON1_H */
> diff --git a/arch/mips/include/asm/mach-loongson1/platform.h b/arch/mips/include/asm/mach-loongson1/platform.h
> new file mode 100644
> index 0000000..db4f02e
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/platform.h
> @@ -0,0 +1,20 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +
> +#ifndef __ASM_MACH_LOONGSON1_PLATFORM_H
> +#define __ASM_MACH_LOONGSON1_PLATFORM_H
> +
> +#include <linux/platform_device.h>
> +
> +extern struct platform_device loongson1_uart_device;
> +
> +void loongson1_serial_setup(void);
> +
> +#endif /* __ASM_MACH_LOONGSON1_PLATFORM_H */
> diff --git a/arch/mips/include/asm/mach-loongson1/prom.h b/arch/mips/include/asm/mach-loongson1/prom.h
> new file mode 100644
> index 0000000..b871dc4
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/prom.h
> @@ -0,0 +1,24 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#ifndef __ASM_MACH_LOONGSON1_PROM_H
> +#define __ASM_MACH_LOONGSON1_PROM_H
> +
> +#include <linux/io.h>
> +#include <linux/init.h>
> +#include <linux/irq.h>
> +
> +/* environment arguments from bootloader */
> +extern unsigned long memsize, highmemsize;
> +
> +/* loongson-specific command line, env and memory initialization */
> +extern char *prom_getenv(char *name);
> +extern void __init prom_init_cmdline(void);
> +
> +#endif /* __ASM_MACH_LOONGSON1_PROM_H */
> diff --git a/arch/mips/include/asm/mach-loongson1/regs-clk.h b/arch/mips/include/asm/mach-loongson1/regs-clk.h
> new file mode 100644
> index 0000000..7a09d6a
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/regs-clk.h
> @@ -0,0 +1,32 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * Loongson1 Clock Register Definitions.
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#ifndef __ASM_MACH_LOONGSON1_REGS_CLK_H
> +#define __ASM_MACH_LOONGSON1_REGS_CLK_H
> +
> +#define LS1_CLK_REG(x)         ((void __iomem *)(LOONGSON1_CLK_BASE + (x)))

"volatile" keyword may be required for __iomem access, the same to the
following similar usage.

Considering a scene is(LS1_XXX_REG(X) doesn't really exist):

LS1_XXX_REG(X) = 0;              /* put cpu into idle and wait interrupt */
LS1_XXX_REG(X) = 7;              /* recover the cpu frequency to the highest */

If no "volatile" keyword indicated, the above two lines will be
intelligently but wrongly removed by compiler.

> +
> +#define        LS1_CLK_PLL_FREQ                LS1_CLK_REG(0x0)
> +#define        LS1_CLK_PLL_DIV                 LS1_CLK_REG(0x4)
> +
> +/* Clock PLL Divisor Register Bits */
> +#define        DIV_DC_EN                       (0x1 << 31)
> +#define DIV_DC                         (0x1f << 26)
> +#define        DIV_CPU_EN                      (0x1 << 25)
> +#define DIV_CPU                                (0x1f << 20)
> +#define        DIV_DDR_EN                      (0x1 << 19)
> +#define DIV_DDR                                (0x1f << 14)

The above exist format violation, SPACE, TAB?

> +
> +#define        DIV_DC_SHIFT                    (26)
> +#define        DIV_CPU_SHIFT                   (20)
> +#define        DIV_DDR_SHIFT                   (14)

parenthesis may be not required for the scenes.

> +
> +#endif /* __ASM_MACH_LOONGSON1_REGS_CLK_H */
> diff --git a/arch/mips/include/asm/mach-loongson1/regs-intc.h b/arch/mips/include/asm/mach-loongson1/regs-intc.h
> new file mode 100644
> index 0000000..3c62411
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/regs-intc.h
> @@ -0,0 +1,25 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * Loongson1 Interrupt register definitions.
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#ifndef __ASM_MACH_LOONGSON1_REGS_INTC_H
> +#define __ASM_MACH_LOONGSON1_REGS_INTC_H
> +
> +#define LS1_INTC_REG(x)                ((void __iomem *)(LOONGSON1_INTC_BASE \
> +                               + n * 0x18 + x))


This may be better:

#define LS1_INTC_REG(x)  \
        ((volatile void __iomem *)(LOONGSON1_INTC_BASE  + (n * 0x18) + x))

> +
> +#define        LS1_INTC_INTISR(n)              LS1_INTC_REG(0x0)
> +#define        LS1_INTC_INTIEN(n)              LS1_INTC_REG(0x4)
> +#define        LS1_INTC_INTSET(n)              LS1_INTC_REG(0x8)
> +#define        LS1_INTC_INTCLR(n)              LS1_INTC_REG(0xc)
> +#define        LS1_INTC_INTPOL(n)              LS1_INTC_REG(0x10)
> +#define        LS1_INTC_INTEDGE(n)             LS1_INTC_REG(0x14)
> +
> +#endif /* __ASM_MACH_LOONGSON1_REGS_INTC_H */
> diff --git a/arch/mips/include/asm/mach-loongson1/regs-wdt.h b/arch/mips/include/asm/mach-loongson1/regs-wdt.h
> new file mode 100644
> index 0000000..2393dd7
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/regs-wdt.h
> @@ -0,0 +1,21 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * Loongson1 Watchdog register definitions.
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#ifndef __ASM_MACH_LOONGSON1_REGS_WDT_H
> +#define __ASM_MACH_LOONGSON1_REGS_WDT_H
> +
> +#define LS1_WDT_REG(x)         ((void __iomem *)(LOONGSON1_WDT_BASE + (x)))
> +
> +#define        LS1_WDT_EN                      LS1_WDT_REG(0x0)
> +#define        LS1_WDT_SET                     LS1_WDT_REG(0x4)
> +#define        LS1_WDT_TIMER                   LS1_WDT_REG(0x8)
> +
> +#endif /* __ASM_MACH_LOONGSON1_REGS_WDT_H */
> diff --git a/arch/mips/include/asm/mach-loongson1/war.h b/arch/mips/include/asm/mach-loongson1/war.h
> new file mode 100644
> index 0000000..e3680a8
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson1/war.h
> @@ -0,0 +1,25 @@
> +/*
> + * This file is subject to the terms and conditions of the GNU General Public
> + * License.  See the file "COPYING" in the main directory of this archive
> + * for more details.
> + *
> + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@xxxxxxxxxxxxxx>
> + */
> +#ifndef __ASM_MACH_LOONGSON1_WAR_H
> +#define __ASM_MACH_LOONGSON1_WAR_H
> +
> +#define R4600_V1_INDEX_ICACHEOP_WAR    0
> +#define R4600_V1_HIT_CACHEOP_WAR       0
> +#define R4600_V2_HIT_CACHEOP_WAR       0
> +#define R5432_CP0_INTERRUPT_WAR                0
> +#define BCM1250_M3_WAR                 0
> +#define SIBYTE_1956_WAR                        0
> +#define MIPS4K_ICACHE_REFILL_WAR       0
> +#define MIPS_CACHE_SYNC_WAR            0
> +#define TX49XX_ICACHE_INDEX_INV_WAR    0
> +#define RM9000_CDEX_SMP_WAR            0
> +#define ICACHE_REFILLS_WORKAROUND_WAR  0
> +#define R10000_LLSC_WAR                        0
> +#define MIPS34K_MISSED_ITLB_WAR                0
> +
> +#endif /* __ASM_MACH_LOONGSON1_WAR_H */
> diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
> index bc01a02..b53d642 100644
> --- a/arch/mips/include/asm/module.h
> +++ b/arch/mips/include/asm/module.h
> @@ -116,6 +116,8 @@ search_module_dbetables(unsigned long addr)
>  #define MODULE_PROC_FAMILY "SB1 "
>  #elif defined CONFIG_CPU_LOONGSON2
>  #define MODULE_PROC_FAMILY "LOONGSON2 "
> +#elif defined CONFIG_CPU_LOONGSON1
> +#define MODULE_PROC_FAMILY "LOONGSON1 "
>  #elif defined CONFIG_CPU_CAVIUM_OCTEON
>  #define MODULE_PROC_FAMILY "OCTEON "
>  #elif defined CONFIG_CPU_XLR
> diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
> index 664bc13..98d4235 100644
> --- a/arch/mips/kernel/cpu-probe.c
> +++ b/arch/mips/kernel/cpu-probe.c
> @@ -37,6 +37,8 @@
>  void (*cpu_wait)(void);
>  EXPORT_SYMBOL(cpu_wait);
>
> +static void __cpuinit decode_configs(struct cpuinfo_mips *c);
> +
>  static void r3081_wait(void)
>  {
>        unsigned long cfg = read_c0_conf();
> @@ -191,6 +193,7 @@ void __init check_wait(void)
>        case CPU_CAVIUM_OCTEON2:
>        case CPU_JZRISC:
>        case CPU_XLR:
> +       case CPU_LOONGSON1:
>                cpu_wait = r4k_wait;
>                break;
>
> @@ -636,6 +639,18 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
>                             MIPS_CPU_32FPR;
>                c->tlbsize = 64;
>                break;
> +       case PRID_IMP_LOONGSON1:
> +               decode_configs(c);
> +
> +               c->cputype = CPU_LOONGSON1;
> +
> +               switch (c->processor_id & PRID_REV_MASK) {
> +               case PRID_REV_LOONGSON1B:
> +                       __cpu_name[cpu] = "Loongson 1B";
> +                       break;
> +               }
> +
> +               break;
>        }
>  }
>
> diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
> index e5ad09a..e316b0e 100644
> --- a/arch/mips/kernel/perf_event_mipsxx.c
> +++ b/arch/mips/kernel/perf_event_mipsxx.c
> @@ -1062,6 +1062,12 @@ init_hw_perf_events(void)
>                mipsxxcore_pmu.irq = irq;
>                mipspmu = &mipsxxcore_pmu;
>                break;
> +       case CPU_LOONGSON1:
> +               mipsxxcore_pmu.name = "mips/loongson1";
> +               mipsxxcore_pmu.num_counters = counters;
> +               mipsxxcore_pmu.irq = irq;
> +               mipspmu = &mipsxxcore_pmu;
> +               break;
>        default:
>                pr_cont("Either hardware does not support performance "
>                        "counters, or not yet implemented.\n");
> diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
> index 01eff7e..cd55823 100644
> --- a/arch/mips/kernel/traps.c
> +++ b/arch/mips/kernel/traps.c
> @@ -1241,6 +1241,7 @@ static inline void parity_protection_init(void)
>                break;
>
>        case CPU_5KC:
> +       case CPU_LOONGSON1:
>                write_c0_ecc(0x80000000);
>                back_to_back_c0_hazard();
>                /* Set the PE bit (bit 31) in the c0_errctl register. */
> diff --git a/arch/mips/loongson1/Kconfig b/arch/mips/loongson1/Kconfig
> new file mode 100644
> index 0000000..237fa21
> --- /dev/null
> +++ b/arch/mips/loongson1/Kconfig
> @@ -0,0 +1,21 @@
> +if MACH_LOONGSON1
> +
> +choice
> +       prompt "Machine Type"
> +
> +config LOONGSON1_LS1B
> +       bool "Loongson LS1B board"
> +       select CEVT_R4K
> +       select CSRC_R4K
> +       select SYS_HAS_CPU_LOONGSON1B
> +       select DMA_NONCOHERENT
> +       select BOOT_ELF32
> +       select IRQ_CPU
> +       select SYS_SUPPORTS_32BIT_KERNEL
> +       select SYS_SUPPORTS_LITTLE_ENDIAN
> +       select SYS_SUPPORTS_HIGHMEM
> +       select SYS_HAS_EARLY_PRINTK
> +
> +endchoice
> +
> +endif # MACH_LOONGSON1
> diff --git a/arch/mips/loongson1/Makefile b/arch/mips/loongson1/Makefile
> new file mode 100644
> index 0000000..e9123c2
> --- /dev/null
> +++ b/arch/mips/loongson1/Makefile
> @@ -0,0 +1,11 @@
> +#
> +# Common code for all Loongson1 based systems
> +#
> +
> +obj-$(CONFIG_MACH_LOONGSON1) += common/
> +
> +#
> +# Loongson LS1B board
> +#
> +
> +obj-$(CONFIG_LOONGSON1_LS1B)  += ls1b/
> diff --git a/arch/mips/loongson1/Platform b/arch/mips/loongson1/Platform
> new file mode 100644
> index 0000000..92804c6
> --- /dev/null
> +++ b/arch/mips/loongson1/Platform
> @@ -0,0 +1,7 @@
> +cflags-$(CONFIG_CPU_LOONGSON1)  += \
> +       $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
> +       -Wa,-mips32r2 -Wa,--trap
> +
> +platform-$(CONFIG_MACH_LOONGSON1)      += loongson1/
> +cflags-$(CONFIG_MACH_LOONGSON1)                += -I$(srctree)/arch/mips/include/asm/mach-loongson1
> +load-$(CONFIG_LOONGSON1_LS1B)          += 0xffffffff80010000
> diff --git a/arch/mips/loongson1/common/Makefile b/arch/mips/loongson1/common/Makefile
> new file mode 100644
> index 0000000..b279770
> --- /dev/null
> +++ b/arch/mips/loongson1/common/Makefile
> @@ -0,0 +1,5 @@
> +#
> +# Makefile for common code of loongson1 based machines.
> +#
> +
> +obj-y  += clock.o irq.o platform.o prom.o reset.o setup.o
> diff --git a/arch/mips/loongson1/common/clock.c b/arch/mips/loongson1/common/clock.c
> new file mode 100644
> index 0000000..7f4f28b
> --- /dev/null
> +++ b/arch/mips/loongson1/common/clock.c
> @@ -0,0 +1,165 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/list.h>
> +#include <linux/mutex.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <asm/clock.h>
> +#include <asm/time.h>
> +
> +#include <loongson1.h>
> +
> +static LIST_HEAD(clocks);
> +static DEFINE_MUTEX(clocks_mutex);
> +
> +struct clk *clk_get(struct device *dev, const char *name)
> +{
> +       struct clk *c;
> +       struct clk *ret = NULL;
> +
> +       mutex_lock(&clocks_mutex);
> +       list_for_each_entry(c, &clocks, node) {
> +               if (!strcmp(c->name, name)) {
> +                       ret = c;
> +                       break;
> +               }
> +       }
> +       mutex_unlock(&clocks_mutex);
> +
> +       return ret;
> +}
> +EXPORT_SYMBOL(clk_get);
> +
> +unsigned long clk_get_rate(struct clk *clk)
> +{
> +       return clk->rate;
> +}
> +EXPORT_SYMBOL(clk_get_rate);
> +
> +static void pll_clk_init(struct clk *clk)
> +{
> +       u32 pll;
> +
> +       pll = __raw_readl(LS1_CLK_PLL_FREQ);
> +       clk->rate = (12 + (pll & 0x3f)) * 33 / 2
> +                       + ((pll >> 8) & 0x3ff) * 33 / 1024 / 2;
> +       clk->rate *= 1000000;
> +}
> +
> +static void cpu_clk_init(struct clk *clk)
> +{
> +       u32 pll, ctrl;
> +
> +       pll = clk_get_rate(clk->parent);
> +       ctrl = __raw_readl(LS1_CLK_PLL_DIV) & DIV_CPU;
> +       clk->rate = pll / (ctrl >> DIV_CPU_SHIFT);
> +}
> +
> +static void ddr_clk_init(struct clk *clk)
> +{
> +       u32 pll, ctrl;
> +
> +       pll = clk_get_rate(clk->parent);
> +       ctrl = __raw_readl(LS1_CLK_PLL_DIV) & DIV_DDR;
> +       clk->rate = pll / (ctrl >> DIV_DDR_SHIFT);
> +}
> +
> +static void dc_clk_init(struct clk *clk)
> +{
> +       u32 pll, ctrl;
> +
> +       pll = clk_get_rate(clk->parent);
> +       ctrl = __raw_readl(LS1_CLK_PLL_DIV) & DIV_DC;
> +       clk->rate = pll / (ctrl >> DIV_DC_SHIFT);
> +}
> +
> +static struct clk_ops pll_clk_ops = {
> +       .init   = pll_clk_init,
> +};
> +
> +static struct clk_ops cpu_clk_ops = {
> +       .init   = cpu_clk_init,
> +};
> +
> +static struct clk_ops ddr_clk_ops = {
> +       .init   = ddr_clk_init,
> +};
> +
> +static struct clk_ops dc_clk_ops = {
> +       .init   = dc_clk_init,
> +};
> +
> +static struct clk pll_clk = {
> +       .name   = "pll",
> +       .ops    = &pll_clk_ops,
> +};
> +
> +static struct clk cpu_clk = {
> +       .name   = "cpu",
> +       .parent = &pll_clk,
> +       .ops    = &cpu_clk_ops,
> +};
> +
> +static struct clk ddr_clk = {
> +       .name   = "ddr",
> +       .parent = &pll_clk,
> +       .ops    = &ddr_clk_ops,
> +};
> +
> +static struct clk dc_clk = {
> +       .name   = "dc",
> +       .parent = &pll_clk,
> +       .ops    = &dc_clk_ops,
> +};
> +
> +int clk_register(struct clk *clk)
> +{
> +       mutex_lock(&clocks_mutex);
> +       list_add(&clk->node, &clocks);
> +       if (clk->ops->init)
> +               clk->ops->init(clk);
> +       mutex_unlock(&clocks_mutex);
> +
> +       return 0;
> +}
> +EXPORT_SYMBOL(clk_register);
> +
> +static struct clk *loongson1_clks[] = {
> +       &pll_clk,
> +       &cpu_clk,
> +       &ddr_clk,
> +       &dc_clk,
> +};
> +
> +int __init loongson1_clock_init(void)
> +{
> +       int i;
> +
> +       for (i = 0; i < ARRAY_SIZE(loongson1_clks); i++)
> +               clk_register(loongson1_clks[i]);
> +
> +       return 0;
> +}
> +
> +void __init plat_time_init(void)
> +{
> +       struct clk *clk;
> +
> +       /* Initialize loongson1 clocks */
> +       loongson1_clock_init();
> +
> +       /* setup mips r4k timer */
> +       clk = clk_get(NULL, "cpu");
> +       if (IS_ERR(clk))
> +               panic("unable to get dc clock, err=%ld", PTR_ERR(clk));
> +
> +       mips_hpt_frequency = clk_get_rate(clk) / 2;
> +}
> diff --git a/arch/mips/loongson1/common/irq.c b/arch/mips/loongson1/common/irq.c
> new file mode 100644
> index 0000000..a5dcabb
> --- /dev/null
> +++ b/arch/mips/loongson1/common/irq.c
> @@ -0,0 +1,136 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <asm/irq_cpu.h>
> +
> +#include <loongson1.h>
> +#include <irq.h>
> +
> +static void loongson1_irq_ack(struct irq_data *d)
> +{
> +       unsigned int bit = (d->irq - LOONGSON1_IRQ_BASE) & 0x1f;
> +       unsigned int n = (d->irq - LOONGSON1_IRQ_BASE) >> 5;
> +
> +       __raw_writel(__raw_readl(LS1_INTC_INTCLR(n))
> +                       | (1 << bit), LS1_INTC_INTCLR(n));
> +}
> +
> +static void loongson1_irq_mask(struct irq_data *d)
> +{
> +       unsigned int bit = (d->irq - LOONGSON1_IRQ_BASE) & 0x1f;
> +       unsigned int n = (d->irq - LOONGSON1_IRQ_BASE) >> 5;
> +
> +       __raw_writel(__raw_readl(LS1_INTC_INTIEN(n))
> +                       & ~(1 << bit), LS1_INTC_INTIEN(n));
> +}
> +
> +static void loongson1_irq_mask_ack(struct irq_data *d)
> +{
> +       unsigned int bit = (d->irq - LOONGSON1_IRQ_BASE) & 0x1f;
> +       unsigned int n = (d->irq - LOONGSON1_IRQ_BASE) >> 5;
> +
> +       __raw_writel(__raw_readl(LS1_INTC_INTIEN(n))
> +                       & ~(1 << bit), LS1_INTC_INTIEN(n));
> +       __raw_writel(__raw_readl(LS1_INTC_INTCLR(n))
> +                       | (1 << bit), LS1_INTC_INTCLR(n));
> +}
> +
> +static void loongson1_irq_unmask(struct irq_data *d)
> +{
> +       unsigned int bit = (d->irq - LOONGSON1_IRQ_BASE) & 0x1f;
> +       unsigned int n = (d->irq - LOONGSON1_IRQ_BASE) >> 5;
> +
> +       __raw_writel(__raw_readl(LS1_INTC_INTIEN(n))
> +                       | (1 << bit), LS1_INTC_INTIEN(n));
> +}
> +
> +static struct irq_chip loongson1_irq_chip = {
> +       .name           = "LOONGSON1-INTC",
> +       .irq_ack        = loongson1_irq_ack,
> +       .irq_mask       = loongson1_irq_mask,
> +       .irq_mask_ack   = loongson1_irq_mask_ack,
> +       .irq_unmask     = loongson1_irq_unmask,
> +};
> +
> +static void loongson1_irq_dispatch(int n)
> +{
> +       u32 int_status, irq;
> +
> +       /* Get pending sources, masked by current enables */
> +       int_status = __raw_readl(LS1_INTC_INTISR(n)) &
> +                       __raw_readl(LS1_INTC_INTIEN(n));
> +
> +       if (int_status) {
> +               irq = LOONGSON1_IRQ(n, __ffs(int_status));
> +               do_IRQ(irq);
> +       }
> +}
> +
> +asmlinkage void plat_irq_dispatch(void)
> +{
> +       unsigned int pending;
> +
> +       pending = read_c0_cause() & read_c0_status() & ST0_IM;
> +
> +       if (pending & CAUSEF_IP7)
> +               do_IRQ(TIMER_IRQ);
> +       else if (pending & CAUSEF_IP2)
> +               loongson1_irq_dispatch(0); /* INT0 */
> +       else if (pending & CAUSEF_IP3)
> +               loongson1_irq_dispatch(1); /* INT1 */
> +       else if (pending & CAUSEF_IP4)
> +               loongson1_irq_dispatch(2); /* INT2 */
> +       else if (pending & CAUSEF_IP5)
> +               loongson1_irq_dispatch(3); /* INT3 */
> +       else if (pending & CAUSEF_IP6)
> +               loongson1_irq_dispatch(4); /* INT4 */
> +       else
> +               spurious_interrupt();
> +
> +}
> +
> +struct irqaction cascade_irqaction = {
> +       .handler = no_action,
> +       .name = "cascade",
> +       .flags = IRQF_NO_THREAD,
> +};
> +
> +static void __init loongson1_irq_init(int base)
> +{
> +       int n;
> +
> +       /* Disable interrupts and clear pending,
> +        * setup all IRQs as high level triggered
> +        */
> +       for (n = 0; n < 4; n++) {
> +               __raw_writel(0x0, LS1_INTC_INTIEN(n));
> +               __raw_writel(0xffffffff, LS1_INTC_INTCLR(n));
> +               __raw_writel(0xffffffff, LS1_INTC_INTPOL(n));
> +               __raw_writel(0x0, LS1_INTC_INTEDGE(n));
> +       }
> +
> +
> +       for (n = base; n < NR_IRQS; n++) {
> +               irq_set_chip_and_handler(n, &loongson1_irq_chip,
> +                                        handle_level_irq);
> +       }
> +
> +       setup_irq(INT0_IRQ, &cascade_irqaction);
> +       setup_irq(INT1_IRQ, &cascade_irqaction);
> +       setup_irq(INT2_IRQ, &cascade_irqaction);
> +       setup_irq(INT3_IRQ, &cascade_irqaction);
> +}
> +
> +void __init arch_init_irq(void)
> +{
> +       mips_cpu_irq_init();
> +       loongson1_irq_init(LOONGSON1_IRQ_BASE);
> +}
> diff --git a/arch/mips/loongson1/common/platform.c b/arch/mips/loongson1/common/platform.c
> new file mode 100644
> index 0000000..c93028e
> --- /dev/null
> +++ b/arch/mips/loongson1/common/platform.c
> @@ -0,0 +1,50 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/serial_8250.h>
> +
> +#include <loongson1.h>
> +
> +#define LOONGSON1_UART_PORT(_id)                                       \
> +       {                                                               \
> +               .mapbase        = LOONGSON1_UART ## _id ## _BASE,       \
> +               .membase        = (void *)(LOONGSON1_UART ## _id ## _BASE), \
> +               .irq            = LOONGSON1_UART ## _id ## _IRQ,        \
> +               .iotype         = UPIO_MEM,                             \
> +               .flags          = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,   \
> +               .type           = PORT_16550A,                          \
> +       }
> +
> +static struct plat_serial8250_port loongson1_serial8250_port[] = {
> +       LOONGSON1_UART_PORT(0),
> +       {},
> +};
> +
> +struct platform_device loongson1_uart_device = {
> +       .name                   = "serial8250",
> +       .id                     = PLAT8250_DEV_PLATFORM,
> +       .dev                    = {
> +               .platform_data  = loongson1_serial8250_port,
> +       },
> +};
> +
> +void __init loongson1_serial_setup(void)
> +{
> +       struct clk *clk;
> +       struct plat_serial8250_port *p;
> +
> +       clk = clk_get(NULL, "dc");
> +       if (IS_ERR(clk))
> +               panic("unable to get dc clock, err=%ld", PTR_ERR(clk));
> +
> +       for (p = loongson1_serial8250_port; p->flags != 0; ++p)
> +               p->uartclk = clk_get_rate(clk);
> +}
> diff --git a/arch/mips/loongson1/common/prom.c b/arch/mips/loongson1/common/prom.c
> new file mode 100644
> index 0000000..70791f1
> --- /dev/null
> +++ b/arch/mips/loongson1/common/prom.c
> @@ -0,0 +1,88 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * Modified from arch/mips/pnx833x/common/prom.c.
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/serial_reg.h>
> +#include <asm/bootinfo.h>
> +
> +#include <loongson1.h>
> +#include <prom.h>
> +
> +int prom_argc;
> +char **prom_argv, **prom_envp;
> +unsigned long memsize, highmemsize;
> +
> +char *prom_getenv(char *envname)
> +{
> +       char **env = prom_envp;
> +       int i;
> +
> +       i = strlen(envname);
> +
> +       while (*env) {
> +               if (strncmp(envname, *env, i) == 0 && *(*env+i) == '=')
> +                       return *env + i + 1;
> +               env++;
> +       }
> +
> +       return 0;
> +}
> +
> +static inline unsigned long env_or_default(char *env, unsigned long dfl)
> +{
> +       char *str = prom_getenv(env);
> +       return str ? simple_strtol(str, 0, 0) : dfl;
> +}
> +
> +void __init prom_init_cmdline(void)
> +{
> +       char *c = &(arcs_cmdline[0]);
> +       int i;
> +
> +       for (i = 1; i < prom_argc; i++) {
> +               strcpy(c, prom_argv[i]);
> +               c += strlen(prom_argv[i]);
> +               if (i < prom_argc-1)
> +                       *c++ = ' ';
> +       }
> +       *c = 0;
> +}
> +
> +void __init prom_init(void)
> +{
> +       prom_argc = fw_arg0;
> +       prom_argv = (char **)fw_arg1;
> +       prom_envp = (char **)fw_arg2;
> +
> +       prom_init_cmdline();
> +
> +       memsize = env_or_default("memsize", DEFAULT_MEMSIZE);
> +       highmemsize = env_or_default("highmemsize", 0x0);
> +}
> +
> +void __init prom_free_prom_memory(void)
> +{
> +}
> +
> +#define UART_BASE      LOONGSON1_UART0_BASE
> +#define PORT(base, offset) (u8 *)(base + offset)
> +
> +void __init prom_putchar(char c)
> +{
> +       int timeout;
> +
> +       timeout = 1024;
> +
> +       while (((readb(PORT(UART_BASE, UART_LSR)) & UART_LSR_THRE) == 0)
> +                       && (timeout-- > 0))
> +               ;
> +
> +       writeb(c, PORT(UART_BASE, UART_TX));
> +}
> diff --git a/arch/mips/loongson1/common/reset.c b/arch/mips/loongson1/common/reset.c
> new file mode 100644
> index 0000000..75f550f
> --- /dev/null
> +++ b/arch/mips/loongson1/common/reset.c
> @@ -0,0 +1,46 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/pm.h>
> +#include <asm/reboot.h>
> +
> +#include <loongson1.h>
> +
> +static void loongson1_restart(char *command)
> +{
> +       __raw_writel(0x1, LS1_WDT_EN);
> +       __raw_writel(0x5000000, LS1_WDT_TIMER);
> +       __raw_writel(0x1, LS1_WDT_SET);
> +}
> +
> +static void loongson1_halt(void)
> +{
> +       pr_notice("\n\n** You can safely turn off the power now **\n\n");
> +       while (1) {
> +               if (cpu_wait)
> +                       cpu_wait();
> +       }
> +}
> +
> +static void loongson1_power_off(void)
> +{
> +       loongson1_halt();
> +}
> +
> +static int __init loongson1_reboot_setup(void)
> +{
> +       _machine_restart = loongson1_restart;
> +       _machine_halt = loongson1_halt;
> +       pm_power_off = loongson1_power_off;
> +
> +       return 0;
> +}
> +
> +arch_initcall(loongson1_reboot_setup);
> diff --git a/arch/mips/loongson1/common/setup.c b/arch/mips/loongson1/common/setup.c
> new file mode 100644
> index 0000000..62128cc
> --- /dev/null
> +++ b/arch/mips/loongson1/common/setup.c
> @@ -0,0 +1,29 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#include <asm/bootinfo.h>
> +
> +#include <prom.h>
> +
> +void __init plat_mem_setup(void)
> +{
> +       add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
> +}
> +
> +const char *get_system_type(void)
> +{
> +       unsigned int processor_id = (&current_cpu_data)->processor_id;
> +
> +       switch (processor_id & PRID_REV_MASK) {
> +       case PRID_REV_LOONGSON1B:
> +               return "LOONGSON LS1B";
> +       default:
> +               return "LOONGSON (unknown)";
> +       }
> +}
> diff --git a/arch/mips/loongson1/ls1b/Makefile b/arch/mips/loongson1/ls1b/Makefile
> new file mode 100644
> index 0000000..891eac4
> --- /dev/null
> +++ b/arch/mips/loongson1/ls1b/Makefile
> @@ -0,0 +1,5 @@
> +#
> +# Makefile for loongson1B based machines.
> +#
> +
> +obj-y += board.o
> diff --git a/arch/mips/loongson1/ls1b/board.c b/arch/mips/loongson1/ls1b/board.c
> new file mode 100644
> index 0000000..b1a602f
> --- /dev/null
> +++ b/arch/mips/loongson1/ls1b/board.c
> @@ -0,0 +1,30 @@
> +/*
> + * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#include <platform.h>
> +
> +#include <linux/serial_8250.h>
> +#include <loongson1.h>
> +
> +static struct platform_device *loongson1_platform_devices[] __initdata = {
> +       &loongson1_uart_device,
> +};
> +
> +static int __init loongson1_platform_init(void)
> +{
> +       int err;
> +
> +       loongson1_serial_setup();
> +
> +       err = platform_add_devices(loongson1_platform_devices,
> +                                  ARRAY_SIZE(loongson1_platform_devices));
> +       return err;
> +}
> +
> +arch_initcall(loongson1_platform_init);
> diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
> index d1f2d4c..99216f0 100644
> --- a/arch/mips/oprofile/common.c
> +++ b/arch/mips/oprofile/common.c
> @@ -89,6 +89,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
>        case CPU_R10000:
>        case CPU_R12000:
>        case CPU_R14000:
> +       case CPU_LOONGSON1:
>                lmodel = &op_model_mipsxx_ops;
>                break;
>
> diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
> index 54759f1..03be670 100644
> --- a/arch/mips/oprofile/op_model_mipsxx.c
> +++ b/arch/mips/oprofile/op_model_mipsxx.c
> @@ -365,6 +365,10 @@ static int __init mipsxx_init(void)
>                op_model_mipsxx_ops.cpu_type = "mips/sb1";
>                break;
>
> +       case CPU_LOONGSON1:
> +               op_model_mipsxx_ops.cpu_type = "mips/loongson1";
> +               break;
> +
>        default:
>                printk(KERN_ERR "Profiling unsupported for this CPU\n");

Regards,
Wu Zhangjin

>
> --
> 1.7.4.1
>
>



[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux