[PATCH] MIPS: Add basic support for Loongson1B (UPDATED)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Zhang, Keguang <keguang.zhang@xxxxxxxxx>

This patch adds basic support for Loongson1B
including serial, timer and interrupt handler.

Loongson 1B is a 32-bit SoC designed by Institute of
Computing Technology (ICT), Chinese Academy of Sciences (CAS),
which implements the MIPS32 release 2 instruction set.

Signed-off-by: Zhang, Keguang <keguang.zhang@xxxxxxxxx>
---
 arch/mips/Kbuild.platforms                       |    1 +
 arch/mips/Kconfig                                |   31 +
 arch/mips/configs/ls1b_defconfig                 |  830 ++++++++++++++++++++++
 arch/mips/include/asm/cpu.h                      |    3 +-
 arch/mips/include/asm/mach-loongson1/irq.h       |   70 ++
 arch/mips/include/asm/mach-loongson1/loongson1.h |   48 ++
 arch/mips/include/asm/mach-loongson1/platform.h  |   20 +
 arch/mips/include/asm/mach-loongson1/prom.h      |   24 +
 arch/mips/include/asm/mach-loongson1/regs-clk.h  |   32 +
 arch/mips/include/asm/mach-loongson1/regs-intc.h |   24 +
 arch/mips/include/asm/mach-loongson1/regs-wdt.h  |   21 +
 arch/mips/include/asm/mach-loongson1/war.h       |   25 +
 arch/mips/include/asm/module.h                   |    2 +
 arch/mips/kernel/cpu-probe.c                     |   15 +
 arch/mips/kernel/perf_event_mipsxx.c             |    6 +
 arch/mips/kernel/traps.c                         |    1 +
 arch/mips/loongson1/Kconfig                      |   29 +
 arch/mips/loongson1/Makefile                     |   11 +
 arch/mips/loongson1/Platform                     |    7 +
 arch/mips/loongson1/common/Makefile              |    5 +
 arch/mips/loongson1/common/clock.c               |  165 +++++
 arch/mips/loongson1/common/irq.c                 |  135 ++++
 arch/mips/loongson1/common/platform.c            |   50 ++
 arch/mips/loongson1/common/prom.c                |   89 +++
 arch/mips/loongson1/common/reset.c               |   46 ++
 arch/mips/loongson1/common/setup.c               |   29 +
 arch/mips/loongson1/ls1b/Makefile                |    5 +
 arch/mips/loongson1/ls1b/board.c                 |   30 +
 arch/mips/oprofile/common.c                      |    1 +
 arch/mips/oprofile/op_model_mipsxx.c             |    4 +
 30 files changed, 1758 insertions(+), 1 deletions(-)
 create mode 100644 arch/mips/configs/ls1b_defconfig
 create mode 100644 arch/mips/include/asm/mach-loongson1/irq.h
 create mode 100644 arch/mips/include/asm/mach-loongson1/loongson1.h
 create mode 100644 arch/mips/include/asm/mach-loongson1/platform.h
 create mode 100644 arch/mips/include/asm/mach-loongson1/prom.h
 create mode 100644 arch/mips/include/asm/mach-loongson1/regs-clk.h
 create mode 100644 arch/mips/include/asm/mach-loongson1/regs-intc.h
 create mode 100644 arch/mips/include/asm/mach-loongson1/regs-wdt.h
 create mode 100644 arch/mips/include/asm/mach-loongson1/war.h
 create mode 100644 arch/mips/loongson1/Kconfig
 create mode 100644 arch/mips/loongson1/Makefile
 create mode 100644 arch/mips/loongson1/Platform
 create mode 100644 arch/mips/loongson1/common/Makefile
 create mode 100644 arch/mips/loongson1/common/clock.c
 create mode 100644 arch/mips/loongson1/common/irq.c
 create mode 100644 arch/mips/loongson1/common/platform.c
 create mode 100644 arch/mips/loongson1/common/prom.c
 create mode 100644 arch/mips/loongson1/common/reset.c
 create mode 100644 arch/mips/loongson1/common/setup.c
 create mode 100644 arch/mips/loongson1/ls1b/Makefile
 create mode 100644 arch/mips/loongson1/ls1b/board.c

diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index 5ce8029..d64786d 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -14,6 +14,7 @@ platforms += jz4740
 platforms += lantiq
 platforms += lasat
 platforms += loongson
+platforms += loongson1
 platforms += mipssim
 platforms += mti-malta
 platforms += netlogic
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b122adc..d693f48 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -259,6 +259,17 @@ config MACH_LOONGSON
 	  Chinese Academy of Sciences (CAS) in the People's Republic
 	  of China. The chief architect is Professor Weiwu Hu.
 
+config MACH_LOONGSON1
+	bool "Loongson1 family of machines"
+	select SYS_SUPPORTS_ZBOOT
+	help
+	  This enables the support of Loongson1 family of machines.
+
+	  Loongson1 is a family of 32-bit MIPS-compatible SoCs.
+	  developed at Institute of Computing Technology (ICT),
+	  Chinese Academy of Sciences (CAS) in the People's Republic
+	  of China.
+
 config MIPS_MALTA
 	bool "MIPS Malta board"
 	select ARCH_MAY_HAVE_PC_FDC
@@ -804,6 +815,7 @@ source "arch/mips/txx9/Kconfig"
 source "arch/mips/vr41xx/Kconfig"
 source "arch/mips/cavium-octeon/Kconfig"
 source "arch/mips/loongson/Kconfig"
+source "arch/mips/loongson1/Kconfig"
 source "arch/mips/netlogic/Kconfig"
 
 endmenu
@@ -1197,6 +1209,14 @@ config CPU_LOONGSON2F
 	  have a similar programming interface with FPGA northbridge used in
 	  Loongson2E.
 
+config CPU_LOONGSON1B
+	bool "Loongson 1B"
+	depends on SYS_HAS_CPU_LOONGSON1B
+	select CPU_LOONGSON1
+	help
+	  The Loongson 1B is a 32-bit SoC, which implements the MIPS32 release 2
+	  instruction set.
+
 config CPU_MIPS32_R1
 	bool "MIPS32 Release 1"
 	depends on SYS_HAS_CPU_MIPS32_R1
@@ -1525,6 +1545,14 @@ config CPU_LOONGSON2
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 
+config CPU_LOONGSON1
+	bool
+	select CPU_MIPS32
+	select CPU_MIPSR2
+	select CPU_HAS_PREFETCH
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+
 config SYS_HAS_CPU_LOONGSON2E
 	bool
 
@@ -1534,6 +1562,9 @@ config SYS_HAS_CPU_LOONGSON2F
 	select CPU_SUPPORTS_ADDRWINCFG if 64BIT
 	select CPU_SUPPORTS_UNCACHED_ACCELERATED
 
+config SYS_HAS_CPU_LOONGSON1B
+	bool
+
 config SYS_HAS_CPU_MIPS32_R1
 	bool
 
diff --git a/arch/mips/configs/ls1b_defconfig b/arch/mips/configs/ls1b_defconfig
new file mode 100644
index 0000000..6463311
--- /dev/null
+++ b/arch/mips/configs/ls1b_defconfig
@@ -0,0 +1,830 @@
+#
+# Automatically generated make config: don't edit
+# Linux/mips 3.0.3 Kernel Configuration
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_ALCHEMY is not set
+# CONFIG_AR7 is not set
+# CONFIG_ATH79 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_JZ4740 is not set
+# CONFIG_LANTIQ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
+CONFIG_MACH_LOONGSON1=y
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_NLM_XLR_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_LOONGSON1_LS1B=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_CSRC_R4K=y
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_MIPS_MACHINE is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+CONFIG_CPU_LOONGSON1B=y
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_CPU_LOONGSON1=y
+CONFIG_SYS_HAS_CPU_LOONGSON1B=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_CPU_HAS_SYNC=y
+# CONFIG_HIGHMEM is not set
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_HW_PERF_EVENTS=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_COMPACTION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NEED_PER_CPU_KM=y
+# CONFIG_CLEANCACHE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_128 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=250
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_KEXEC=y
+# CONFIG_SECCOMP is not set
+# CONFIG_USE_OF is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="(none)"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_IRQ_SHOW=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TINY_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_RD_LZO=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EXPERT=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+# CONFIG_EMBEDDED is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_JUMP_LABEL is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_SUSPEND is not set
+# CONFIG_HIBERNATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+# CONFIG_DNS_RESOLVER is not set
+# CONFIG_BATMAN_ADV is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+# CONFIG_TRACE_SINK is not set
+# CONFIG_DEVKMEM is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_CONSOLE_POLL=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_XILINX_PS_UART is not set
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_RAMOOPS=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+
+#
+# Enable Device Drivers -> PPS to see the PTP clock options.
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+# CONFIG_MFD_SUPPORT is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TMPFS_XATTR=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO_REDUCED is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_BOOT_PRINTK_DELAY=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_KGDB=y
+CONFIG_KGDB_SERIAL_CONSOLE=y
+# CONFIG_KGDB_TESTS is not set
+CONFIG_KGDB_LOW_LEVEL_TRAP=y
+CONFIG_KGDB_KDB=y
+CONFIG_KDB_KEYBOARD=y
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_DEBUG_ZBOOT is not set
+# CONFIG_SPINLOCK_TEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_POWERPC=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_BCJ=y
+# CONFIG_XZ_DEC_TEST is not set
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_XZ=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+# CONFIG_AVERAGE is not set
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 5f95a4b..975f372 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -191,6 +191,7 @@
 #define PRID_REV_34K_V1_0_2	0x0022
 #define PRID_REV_LOONGSON2E	0x0002
 #define PRID_REV_LOONGSON2F	0x0003
+#define PRID_REV_LOONGSON1B	0x0020
 
 /*
  * Older processors used to encode processor version and revision in two
@@ -253,7 +254,7 @@ enum cpu_type_enum {
 	 */
 	CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
 	CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350,
-	CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC,
+	CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_LOONGSON1,
 
 	/*
 	 * MIPS64 class processors
diff --git a/arch/mips/include/asm/mach-loongson1/irq.h b/arch/mips/include/asm/mach-loongson1/irq.h
new file mode 100644
index 0000000..3f1053e
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/irq.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
+ *
+ * IRQ mappings for Loongson1.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+#ifndef __ASM_MACH_LOONGSON1_IRQ_H
+#define __ASM_MACH_LOONGSON1_IRQ_H
+
+/*
+ * CPU core Interrupt Numbers
+ */
+#define MIPS_CPU_IRQ_BASE		0
+#define MIPS_CPU_IRQ(x)			(MIPS_CPU_IRQ_BASE + (x))
+#define SOFTINT0_IRQ			MIPS_CPU_IRQ(0)
+#define SOFTINT1_IRQ			MIPS_CPU_IRQ(1)
+#define INT0_IRQ			MIPS_CPU_IRQ(2)
+#define INT1_IRQ			MIPS_CPU_IRQ(3)
+#define INT2_IRQ			MIPS_CPU_IRQ(4)
+#define INT3_IRQ			MIPS_CPU_IRQ(5)
+#define INT4_IRQ			MIPS_CPU_IRQ(6)
+#define TIMER_IRQ			MIPS_CPU_IRQ(7)		/* cpu timer */
+
+/*
+ * INT0~3 Interrupt Numbers
+ */
+#define LOONGSON1_IRQ_BASE		8
+#define LOONGSON1_IRQ(n,x)		(LOONGSON1_IRQ_BASE + (n << 5) + (x))
+
+#define LOONGSON1_UART0_IRQ		LOONGSON1_IRQ(0,2)
+#define LOONGSON1_UART1_IRQ		LOONGSON1_IRQ(0,3)
+#define LOONGSON1_UART2_IRQ		LOONGSON1_IRQ(0,4)
+#define LOONGSON1_UART3_IRQ		LOONGSON1_IRQ(0,5)
+#define LOONGSON1_CAN0_IRQ		LOONGSON1_IRQ(0,6)
+#define LOONGSON1_CAN1_IRQ		LOONGSON1_IRQ(0,7)
+#define LOONGSON1_SPI0_IRQ		LOONGSON1_IRQ(0,8)
+#define LOONGSON1_SPI1_IRQ		LOONGSON1_IRQ(0,9)
+#define LOONGSON1_AC97_IRQ		LOONGSON1_IRQ(0,10)
+#define LOONGSON1_DMA0_IRQ		LOONGSON1_IRQ(0,13)
+#define LOONGSON1_DMA1_IRQ		LOONGSON1_IRQ(0,14)
+#define LOONGSON1_DMA2_IRQ		LOONGSON1_IRQ(0,15)
+#define LOONGSON1_PWM0_IRQ		LOONGSON1_IRQ(0,17)
+#define LOONGSON1_PWM1_IRQ		LOONGSON1_IRQ(0,18)
+#define LOONGSON1_PWM2_IRQ		LOONGSON1_IRQ(0,19)
+#define LOONGSON1_PWM3_IRQ		LOONGSON1_IRQ(0,20)
+#define LOONGSON1_RTC_INT0_IRQ		LOONGSON1_IRQ(0,21)
+#define LOONGSON1_RTC_INT1_IRQ		LOONGSON1_IRQ(0,22)
+#define LOONGSON1_RTC_INT2_IRQ		LOONGSON1_IRQ(0,23)
+#define LOONGSON1_TOY_INT0_IRQ		LOONGSON1_IRQ(0,24)
+#define LOONGSON1_TOY_INT1_IRQ		LOONGSON1_IRQ(0,25)
+#define LOONGSON1_TOY_INT2_IRQ		LOONGSON1_IRQ(0,26)
+#define LOONGSON1_RTC_TICK_IRQ		LOONGSON1_IRQ(0,27)
+#define LOONGSON1_TOY_TICK_IRQ		LOONGSON1_IRQ(0,28)
+#define LOONGSON1_UART4_IRQ		LOONGSON1_IRQ(0,29)
+#define LOONGSON1_UART5_IRQ		LOONGSON1_IRQ(0,30)
+
+#define LOONGSON1_OHCI_IRQ		LOONGSON1_IRQ(1,0)
+#define LOONGSON1_EHCI_IRQ		LOONGSON1_IRQ(1,1)
+#define LOONGSON1_GMAC0_IRQ		LOONGSON1_IRQ(1,2)
+#define LOONGSON1_GMAC1_IRQ		LOONGSON1_IRQ(1,3)
+
+#define NR_IRQS				LOONGSON1_GMAC1_IRQ
+
+#endif /* __ASM_MACH_LOONGSON1_IRQ_H */
diff --git a/arch/mips/include/asm/mach-loongson1/loongson1.h b/arch/mips/include/asm/mach-loongson1/loongson1.h
new file mode 100644
index 0000000..466136d
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/loongson1.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
+ *
+ * Register mappings for Loongson1.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+#ifndef __ASM_MACH_LOONGSON1_LOONGSON1_H
+#define __ASM_MACH_LOONGSON1_LOONGSON1_H
+
+#define DEFAULT_MEMSIZE			(256)	/* If no memsize provided */
+
+/* Loongson1 Register Bases */
+/* All regs are accessed in KSEG1 */
+#define LOONGSON1_REGBASE		(0xa0000000ul + 0x1fe00000ul)
+
+#define LOONGSON1_INTC_BASE		(0xbfd01040)
+#define LOONGSON1_USB_BASE		(0xbfe00000)
+#define LOONGSON1_GMAC0_BASE		(0xbfe10000)
+#define LOONGSON1_GMAC1_BASE		(0xbfe20000)
+#define LOONGSON1_UART0_BASE		(0xbfe40000)
+#define LOONGSON1_UART1_BASE		(0xbfe44000)
+#define LOONGSON1_UART2_BASE		(0xbfe48000)
+#define LOONGSON1_UART3_BASE		(0xbfe4c000)
+#define LOONGSON1_UART4_BASE		(0xbfe6c000)
+#define LOONGSON1_UART5_BASE		(0xbfe7c000)
+#define LOONGSON1_CAN0_BASE		(0xbfe50000)
+#define LOONGSON1_CAN1_BASE		(0xbfe54000)
+#define LOONGSON1_I2C0_BASE		(0xbfe58000)
+#define LOONGSON1_I2C1_BASE		(0xbfe68000)
+#define LOONGSON1_I2C2_BASE		(0xbfe70000)
+#define LOONGSON1_PWM_BASE		(0xbfe5c000)
+#define LOONGSON1_WDT_BASE		(0xbfe5c060)
+#define LOONGSON1_RTC_BASE		(0xbfe64000)
+#define LOONGSON1_AC97_BASE		(0xbfe74000)
+#define LOONGSON1_NAND_BASE		(0xbfe78000)
+#define LOONGSON1_CLK_BASE		(0xbfe78030)
+
+#include <regs-clk.h>
+#include <regs-intc.h>
+#include <regs-wdt.h>
+
+#endif /* __ASM_MACH_LOONGSON1_LOONGSON1_H */
diff --git a/arch/mips/include/asm/mach-loongson1/platform.h b/arch/mips/include/asm/mach-loongson1/platform.h
new file mode 100644
index 0000000..db4f02e
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/platform.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+#ifndef __ASM_MACH_LOONGSON1_PLATFORM_H
+#define __ASM_MACH_LOONGSON1_PLATFORM_H
+
+#include <linux/platform_device.h>
+
+extern struct platform_device loongson1_uart_device;
+
+void loongson1_serial_setup(void);
+
+#endif /* __ASM_MACH_LOONGSON1_PLATFORM_H */
diff --git a/arch/mips/include/asm/mach-loongson1/prom.h b/arch/mips/include/asm/mach-loongson1/prom.h
new file mode 100644
index 0000000..b871dc4
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/prom.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON1_PROM_H
+#define __ASM_MACH_LOONGSON1_PROM_H
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+/* environment arguments from bootloader */
+extern unsigned long memsize, highmemsize;
+
+/* loongson-specific command line, env and memory initialization */
+extern char *prom_getenv(char *name);
+extern void __init prom_init_cmdline(void);
+
+#endif /* __ASM_MACH_LOONGSON1_PROM_H */
diff --git a/arch/mips/include/asm/mach-loongson1/regs-clk.h b/arch/mips/include/asm/mach-loongson1/regs-clk.h
new file mode 100644
index 0000000..8a14d97
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/regs-clk.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
+ *
+ * Loongson1 Clock Register Definitions.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON1_REGS_CLK_H
+#define __ASM_MACH_LOONGSON1_REGS_CLK_H
+
+#define LOONGSON1_CLK_REG(x)		((void __iomem *)(LOONGSON1_CLK_BASE + (x)))
+
+#define	LS1_CLK_PLL_FREQ		LOONGSON1_CLK_REG(0x0)
+#define	LS1_CLK_PLL_DIV			LOONGSON1_CLK_REG(0x4)
+
+/* Clock PLL Divisor Register Bits */
+#define	DIV_DC_EN			(0x1 << 31)
+#define DIV_DC				(0x1f << 26)
+#define	DIV_CPU_EN			(0x1 << 25)
+#define DIV_CPU				(0x1f << 20)
+#define	DIV_DDR_EN			(0x1 << 19)
+#define DIV_DDR				(0x1f << 14)
+
+#define	DIV_DC_SHIFT			(26)
+#define	DIV_CPU_SHIFT			(20)
+#define	DIV_DDR_SHIFT			(14)
+
+#endif /* __ASM_MACH_LOONGSON1_REGS_CLK_H */
diff --git a/arch/mips/include/asm/mach-loongson1/regs-intc.h b/arch/mips/include/asm/mach-loongson1/regs-intc.h
new file mode 100644
index 0000000..69d1b4a
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/regs-intc.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
+ *
+ * Loongson1 Interrupt register definitions.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON1_REGS_INTC_H
+#define __ASM_MACH_LOONGSON1_REGS_INTC_H
+
+#define LOONGSON1_INTC_REG(x)		((void __iomem *)(LOONGSON1_INTC_BASE + n * 0x18 + x))
+
+#define	LS1_INTC_INTISR(n)		LOONGSON1_INTC_REG(0x0)
+#define	LS1_INTC_INTIEN(n)		LOONGSON1_INTC_REG(0x4)
+#define	LS1_INTC_INTSET(n)		LOONGSON1_INTC_REG(0x8)
+#define	LS1_INTC_INTCLR(n)		LOONGSON1_INTC_REG(0xc)
+#define	LS1_INTC_INTPOL(n)		LOONGSON1_INTC_REG(0x10)
+#define	LS1_INTC_INTEDGE(n)		LOONGSON1_INTC_REG(0x14)
+
+#endif /* __ASM_MACH_LOONGSON1_REGS_INTC_H */
diff --git a/arch/mips/include/asm/mach-loongson1/regs-wdt.h b/arch/mips/include/asm/mach-loongson1/regs-wdt.h
new file mode 100644
index 0000000..3e5a51a
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/regs-wdt.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
+ *
+ * Loongson1 Watchdog register definitions.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON1_REGS_WDT_H
+#define __ASM_MACH_LOONGSON1_REGS_WDT_H
+
+#define LOONGSON1_WDT_REG(x)		((void __iomem *)(LOONGSON1_WDT_BASE + (x)))
+
+#define	LS1_WDT_EN			LOONGSON1_WDT_REG(0x0)
+#define	LS1_WDT_SET			LOONGSON1_WDT_REG(0x4)
+#define	LS1_WDT_TIMER			LOONGSON1_WDT_REG(0x8)
+
+#endif /* __ASM_MACH_LOONGSON1_REGS_WDT_H */
diff --git a/arch/mips/include/asm/mach-loongson1/war.h b/arch/mips/include/asm/mach-loongson1/war.h
new file mode 100644
index 0000000..e3680a8
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@xxxxxxxxxxxxxx>
+ */
+#ifndef __ASM_MACH_LOONGSON1_WAR_H
+#define __ASM_MACH_LOONGSON1_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MACH_LOONGSON1_WAR_H */
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
index bc01a02..b53d642 100644
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -116,6 +116,8 @@ search_module_dbetables(unsigned long addr)
 #define MODULE_PROC_FAMILY "SB1 "
 #elif defined CONFIG_CPU_LOONGSON2
 #define MODULE_PROC_FAMILY "LOONGSON2 "
+#elif defined CONFIG_CPU_LOONGSON1
+#define MODULE_PROC_FAMILY "LOONGSON1 "
 #elif defined CONFIG_CPU_CAVIUM_OCTEON
 #define MODULE_PROC_FAMILY "OCTEON "
 #elif defined CONFIG_CPU_XLR
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index ebc0cd2..c886e0d 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -37,6 +37,8 @@
 void (*cpu_wait)(void);
 EXPORT_SYMBOL(cpu_wait);
 
+static void __cpuinit decode_configs(struct cpuinfo_mips *c);
+
 static void r3081_wait(void)
 {
 	unsigned long cfg = read_c0_conf();
@@ -190,6 +192,7 @@ void __init check_wait(void)
 	case CPU_CAVIUM_OCTEON_PLUS:
 	case CPU_CAVIUM_OCTEON2:
 	case CPU_JZRISC:
+	case CPU_LOONGSON1:
 		cpu_wait = r4k_wait;
 		break;
 
@@ -635,6 +638,18 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 			     MIPS_CPU_32FPR;
 		c->tlbsize = 64;
 		break;
+	case PRID_IMP_LOONGSON1:
+		decode_configs(c);
+
+		c->cputype = CPU_LOONGSON1;
+
+		switch (c->processor_id & PRID_REV_MASK) {
+		case PRID_REV_LOONGSON1B:
+			__cpu_name[cpu] = "Loongson 1B";
+			break;
+		}
+
+		break;
 	}
 }
 
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index e5ad09a..e316b0e 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -1062,6 +1062,12 @@ init_hw_perf_events(void)
 		mipsxxcore_pmu.irq = irq;
 		mipspmu = &mipsxxcore_pmu;
 		break;
+	case CPU_LOONGSON1:
+		mipsxxcore_pmu.name = "mips/loongson1";
+		mipsxxcore_pmu.num_counters = counters;
+		mipsxxcore_pmu.irq = irq;
+		mipspmu = &mipsxxcore_pmu;
+		break;
 	default:
 		pr_cont("Either hardware does not support performance "
 			"counters, or not yet implemented.\n");
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 01eff7e..cd55823 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1241,6 +1241,7 @@ static inline void parity_protection_init(void)
 		break;
 
 	case CPU_5KC:
+	case CPU_LOONGSON1:
 		write_c0_ecc(0x80000000);
 		back_to_back_c0_hazard();
 		/* Set the PE bit (bit 31) in the c0_errctl register. */
diff --git a/arch/mips/loongson1/Kconfig b/arch/mips/loongson1/Kconfig
new file mode 100644
index 0000000..c22ceac
--- /dev/null
+++ b/arch/mips/loongson1/Kconfig
@@ -0,0 +1,29 @@
+if MACH_LOONGSON1
+
+choice
+	prompt "Machine Type"
+
+config LOONGSON1_LS1B
+	bool "Loongson LS1B board"
+	select ARCH_SPARSEMEM_ENABLE
+	select CEVT_R4K
+	select CSRC_R4K
+	select SYS_HAS_CPU_LOONGSON1B
+	select DMA_NONCOHERENT
+	select BOOT_ELF32
+	select IRQ_CPU
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_HAS_EARLY_PRINTK
+#	select USB_ARCH_HAS_OHCI
+#	select USB_ARCH_HAS_EHCI
+
+endchoice
+
+#config LOONGSON_SUSPEND
+#	bool
+#	default y
+#	depends on CPU_SUPPORTS_CPUFREQ && SUSPEND
+
+endif # MACH_LOONGSON1
diff --git a/arch/mips/loongson1/Makefile b/arch/mips/loongson1/Makefile
new file mode 100644
index 0000000..e9123c2
--- /dev/null
+++ b/arch/mips/loongson1/Makefile
@@ -0,0 +1,11 @@
+#
+# Common code for all Loongson1 based systems
+#
+
+obj-$(CONFIG_MACH_LOONGSON1) += common/
+
+#
+# Loongson LS1B board
+#
+
+obj-$(CONFIG_LOONGSON1_LS1B)  += ls1b/
diff --git a/arch/mips/loongson1/Platform b/arch/mips/loongson1/Platform
new file mode 100644
index 0000000..92804c6
--- /dev/null
+++ b/arch/mips/loongson1/Platform
@@ -0,0 +1,7 @@
+cflags-$(CONFIG_CPU_LOONGSON1)  += \
+	$(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
+	-Wa,-mips32r2 -Wa,--trap
+
+platform-$(CONFIG_MACH_LOONGSON1)	+= loongson1/
+cflags-$(CONFIG_MACH_LOONGSON1)		+= -I$(srctree)/arch/mips/include/asm/mach-loongson1
+load-$(CONFIG_LOONGSON1_LS1B)		+= 0xffffffff80010000
diff --git a/arch/mips/loongson1/common/Makefile b/arch/mips/loongson1/common/Makefile
new file mode 100644
index 0000000..b279770
--- /dev/null
+++ b/arch/mips/loongson1/common/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for common code of loongson1 based machines.
+#
+
+obj-y	+= clock.o irq.o platform.o prom.o reset.o setup.o
diff --git a/arch/mips/loongson1/common/clock.c b/arch/mips/loongson1/common/clock.c
new file mode 100644
index 0000000..cd8d151
--- /dev/null
+++ b/arch/mips/loongson1/common/clock.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <asm/clock.h>
+#include <asm/time.h>
+
+#include <loongson1.h>
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+
+struct clk *clk_get(struct device *dev, const char *name)
+{
+	struct clk *c;
+	struct clk *ret = NULL;
+
+	mutex_lock(&clocks_mutex);
+	list_for_each_entry(c, &clocks, node) {
+		if (!strcmp(c->name, name)) {
+			ret = c;
+			break;
+		}
+	}
+	mutex_unlock(&clocks_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_get);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+static void pll_clk_init(struct clk *clk)
+{
+	u32 pll;
+
+	pll = __raw_readl(LS1_CLK_PLL_FREQ);
+        clk->rate = (12 + (pll & 0x3f)) * 33 / 2
+			+ ((pll >>8 ) & 0x3ff) * 33 / 1024 / 2;
+        clk->rate *= 1000000;
+}
+
+static void cpu_clk_init(struct clk *clk)
+{
+	u32 pll, ctrl;
+
+	pll = clk_get_rate(clk->parent);
+	ctrl = __raw_readl(LS1_CLK_PLL_DIV) & DIV_CPU;
+	clk->rate = pll / (ctrl >> DIV_CPU_SHIFT);
+}
+
+static void ddr_clk_init(struct clk *clk)
+{
+	u32 pll, ctrl;
+
+	pll = clk_get_rate(clk->parent);
+	ctrl = __raw_readl(LS1_CLK_PLL_DIV) & DIV_DDR;
+	clk->rate = pll / (ctrl >> DIV_DDR_SHIFT);
+}
+
+static void dc_clk_init(struct clk *clk)
+{
+	u32 pll, ctrl;
+
+	pll = clk_get_rate(clk->parent);
+	ctrl = __raw_readl(LS1_CLK_PLL_DIV) & DIV_DC;
+	clk->rate = pll / (ctrl >> DIV_DC_SHIFT);
+}
+
+static struct clk_ops pll_clk_ops = {
+	.init	= pll_clk_init,
+};
+
+static struct clk_ops cpu_clk_ops = {
+	.init	= cpu_clk_init,
+};
+
+static struct clk_ops ddr_clk_ops = {
+	.init	= ddr_clk_init,
+};
+
+static struct clk_ops dc_clk_ops = {
+	.init	= dc_clk_init,
+};
+
+static struct clk pll_clk = {
+	.name	= "pll",
+	.ops	= &pll_clk_ops,
+};
+
+static struct clk cpu_clk = {
+	.name	= "cpu",
+	.parent = &pll_clk,
+	.ops	= &cpu_clk_ops,
+};
+
+static struct clk ddr_clk = {
+	.name	= "ddr",
+	.parent = &pll_clk,
+	.ops	= &ddr_clk_ops,
+};
+
+static struct clk dc_clk = {
+	.name	= "dc",
+	.parent = &pll_clk,
+	.ops	= &dc_clk_ops,
+};
+
+int clk_register(struct clk *clk)
+{
+	mutex_lock(&clocks_mutex);
+	list_add(&clk->node, &clocks);
+	if (clk->ops->init)
+		clk->ops->init(clk);
+	mutex_unlock(&clocks_mutex);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+static struct clk *loongson1_clks[] = {
+	&pll_clk,
+	&cpu_clk,
+	&ddr_clk,
+	&dc_clk,
+};
+
+int __init loongson1_clock_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(loongson1_clks); i++)
+		clk_register(loongson1_clks[i]);
+
+	return 0;
+}
+
+void __init plat_time_init(void)
+{
+	struct clk *clk;
+
+	/* Initialize loongson1 clocks */
+	loongson1_clock_init();
+
+        /* setup mips r4k timer */
+	clk = clk_get(NULL, "cpu");
+	if (IS_ERR(clk))
+		panic("unable to get dc clock, err=%ld", PTR_ERR(clk));
+
+	mips_hpt_frequency = clk_get_rate(clk) / 2;
+}
diff --git a/arch/mips/loongson1/common/irq.c b/arch/mips/loongson1/common/irq.c
new file mode 100644
index 0000000..688d7b9
--- /dev/null
+++ b/arch/mips/loongson1/common/irq.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq_cpu.h>
+
+#include <loongson1.h>
+#include <irq.h>
+
+static void loongson1_irq_ack(struct irq_data *d)
+{
+	unsigned int bit = (d->irq - LOONGSON1_IRQ_BASE) & 0x1f;
+	unsigned int n = (d->irq - LOONGSON1_IRQ_BASE) >> 5;
+
+	__raw_writel(__raw_readl(LS1_INTC_INTCLR(n))
+			| (1 << bit), LS1_INTC_INTCLR(n));
+}
+
+static void loongson1_irq_mask(struct irq_data *d)
+{
+	unsigned int bit = (d->irq - LOONGSON1_IRQ_BASE) & 0x1f;
+	unsigned int n = (d->irq - LOONGSON1_IRQ_BASE) >> 5;
+
+	__raw_writel(__raw_readl(LS1_INTC_INTIEN(n))
+			& ~(1 << bit), LS1_INTC_INTIEN(n));
+}
+
+static void loongson1_irq_mask_ack(struct irq_data *d)
+{
+	unsigned int bit = (d->irq - LOONGSON1_IRQ_BASE) & 0x1f;
+	unsigned int n = (d->irq - LOONGSON1_IRQ_BASE) >> 5;
+
+	__raw_writel(__raw_readl(LS1_INTC_INTIEN(n))
+			& ~(1 << bit), LS1_INTC_INTIEN(n));
+	__raw_writel(__raw_readl(LS1_INTC_INTCLR(n))
+			| (1 << bit), LS1_INTC_INTCLR(n));
+}
+
+static void loongson1_irq_unmask(struct irq_data *d)
+{
+	unsigned int bit = (d->irq - LOONGSON1_IRQ_BASE) & 0x1f;
+	unsigned int n = (d->irq - LOONGSON1_IRQ_BASE) >> 5;
+
+	__raw_writel(__raw_readl(LS1_INTC_INTIEN(n))
+			| (1 << bit), LS1_INTC_INTIEN(n));
+}
+
+static struct irq_chip loongson1_irq_chip = {
+	.name		= "LOONGSON1-INTC",
+	.irq_ack	= loongson1_irq_ack,
+	.irq_mask	= loongson1_irq_mask,
+	.irq_mask_ack	= loongson1_irq_mask_ack,
+	.irq_unmask	= loongson1_irq_unmask,
+};
+
+static void loongson1_irq_dispatch(int n)
+{
+	u32 int_status, irq;
+
+	/* Get pending sources, masked by current enables */
+	int_status = __raw_readl(LS1_INTC_INTISR(n)) &
+			__raw_readl(LS1_INTC_INTIEN(n));
+
+	if (int_status) {
+		irq = LOONGSON1_IRQ(n, __ffs(int_status));
+		do_IRQ(irq);
+	}
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int pending;
+
+	pending = read_c0_cause() & read_c0_status() & ST0_IM;
+
+	if (pending & CAUSEF_IP7)
+		do_IRQ(TIMER_IRQ);
+	else if (pending & CAUSEF_IP2)
+		loongson1_irq_dispatch(0); /* INT0 */
+	else if (pending & CAUSEF_IP3)
+		loongson1_irq_dispatch(1); /* INT1 */
+	else if (pending & CAUSEF_IP4)
+		loongson1_irq_dispatch(2); /* INT2 */
+	else if (pending & CAUSEF_IP5)
+		loongson1_irq_dispatch(3); /* INT3 */
+	else if (pending & CAUSEF_IP6)
+		loongson1_irq_dispatch(4); /* INT4 */
+	else
+		spurious_interrupt();
+
+}
+
+struct irqaction cascade_irqaction = {
+	.handler = no_action,
+	.name = "cascade",
+};
+
+static void __init loongson1_irq_init(int base)
+{
+	int n;
+
+	/* Disable interrupts and clear pending,
+	 * setup all IRQs as high level triggered
+	 */
+	for (n = 0; n < 4; n++) {
+		__raw_writel(0x0, LS1_INTC_INTIEN(n));
+		__raw_writel(0xffffffff, LS1_INTC_INTCLR(n));
+		__raw_writel(0xffffffff, LS1_INTC_INTPOL(n));
+		__raw_writel(0x0, LS1_INTC_INTEDGE(n));
+	}
+
+
+	for (n = base; n < NR_IRQS; n++) {
+		irq_set_chip_and_handler(n, &loongson1_irq_chip,
+					 handle_level_irq);
+	}
+
+	setup_irq(INT0_IRQ, &cascade_irqaction);
+	setup_irq(INT1_IRQ, &cascade_irqaction);
+	setup_irq(INT2_IRQ, &cascade_irqaction);
+	setup_irq(INT3_IRQ, &cascade_irqaction);
+}
+
+void __init arch_init_irq(void)
+{
+	mips_cpu_irq_init();
+	loongson1_irq_init(LOONGSON1_IRQ_BASE);
+}
diff --git a/arch/mips/loongson1/common/platform.c b/arch/mips/loongson1/common/platform.c
new file mode 100644
index 0000000..4ea477d
--- /dev/null
+++ b/arch/mips/loongson1/common/platform.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/serial_8250.h>
+
+#include <loongson1.h>
+
+#define LOONGSON1_UART_PORT(_id)					\
+	{								\
+		.mapbase	= LOONGSON1_UART ## _id ## _BASE,	\
+		.membase	= (void *)(LOONGSON1_UART ## _id ## _BASE), \
+		.irq		= LOONGSON1_UART ## _id ## _IRQ,	\
+		.iotype		= UPIO_MEM,				\
+		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,	\
+		.type		= PORT_16550A,				\
+	}
+
+static struct plat_serial8250_port loongson1_serial8250_port[] = {
+	LOONGSON1_UART_PORT(0),
+	{},
+};
+
+struct platform_device loongson1_uart_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= loongson1_serial8250_port,
+	},
+};
+
+void __init loongson1_serial_setup(void)
+{
+	struct clk *clk;
+	struct plat_serial8250_port *p;
+
+        clk = clk_get(NULL, "dc");
+        if (IS_ERR(clk))
+		panic("unable to get dc clock, err=%ld", PTR_ERR(clk));
+
+	for (p = loongson1_serial8250_port; p->flags != 0; ++p)
+		p->uartclk = clk_get_rate(clk);
+}
diff --git a/arch/mips/loongson1/common/prom.c b/arch/mips/loongson1/common/prom.c
new file mode 100644
index 0000000..a7422f4
--- /dev/null
+++ b/arch/mips/loongson1/common/prom.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
+ *
+ * Modified from arch/mips/pnx833x/common/prom.c.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/serial_reg.h>
+#include <asm/bootinfo.h>
+
+#include <loongson1.h>
+#include <prom.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+unsigned long memsize, highmemsize;
+
+char *prom_getenv(char *envname)
+{
+	extern char **prom_envp;
+	char **env = prom_envp;
+	int i;
+
+	i = strlen(envname);
+
+	while (*env) {
+		if (strncmp(envname, *env, i) == 0 && *(*env+i) == '=')
+			return *env + i + 1;
+		env++;
+	}
+
+	return 0;
+}
+
+static inline unsigned long env_or_default(char *env, unsigned long dfl)
+{
+	char *str = prom_getenv(env);
+	return str ? simple_strtol(str, 0, 0) : dfl;
+}
+
+void __init prom_init_cmdline(void)
+{
+	char *c = &(arcs_cmdline[0]);
+	int i;
+
+	for (i = 1; i < prom_argc; i++) {
+		strcpy(c, prom_argv[i]);
+		c += strlen(prom_argv[i]);
+		if (i < prom_argc-1)
+			*c++ = ' ';
+	}
+	*c = 0;
+}
+
+void __init prom_init(void)
+{
+	prom_argc = fw_arg0;
+	prom_argv = (char **)fw_arg1;
+	prom_envp = (char **)fw_arg2;
+
+	prom_init_cmdline();
+
+	memsize = env_or_default("memsize", DEFAULT_MEMSIZE);
+	highmemsize = env_or_default("highmemsize", 0x0);
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+#define UART_BASE	LOONGSON1_UART0_BASE
+#define PORT(base, offset) (u8 *)(base + offset)
+
+void __init prom_putchar(char c)
+{
+	int timeout;
+
+	timeout = 1024;
+
+	while (((readb(PORT(UART_BASE, UART_LSR)) & UART_LSR_THRE) == 0)
+			&& (timeout-- > 0))
+		;
+
+	writeb(c, PORT(UART_BASE, UART_TX));
+}
diff --git a/arch/mips/loongson1/common/reset.c b/arch/mips/loongson1/common/reset.c
new file mode 100644
index 0000000..75f550f
--- /dev/null
+++ b/arch/mips/loongson1/common/reset.c
@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <asm/reboot.h>
+
+#include <loongson1.h>
+
+static void loongson1_restart(char *command)
+{
+	__raw_writel(0x1, LS1_WDT_EN);
+	__raw_writel(0x5000000, LS1_WDT_TIMER);
+	__raw_writel(0x1, LS1_WDT_SET);
+}
+
+static void loongson1_halt(void)
+{
+	pr_notice("\n\n** You can safely turn off the power now **\n\n");
+	while (1) {
+		if (cpu_wait)
+			cpu_wait();
+	}
+}
+
+static void loongson1_power_off(void)
+{
+	loongson1_halt();
+}
+
+static int __init loongson1_reboot_setup(void)
+{
+	_machine_restart = loongson1_restart;
+	_machine_halt = loongson1_halt;
+	pm_power_off = loongson1_power_off;
+
+	return 0;
+}
+
+arch_initcall(loongson1_reboot_setup);
diff --git a/arch/mips/loongson1/common/setup.c b/arch/mips/loongson1/common/setup.c
new file mode 100644
index 0000000..62128cc
--- /dev/null
+++ b/arch/mips/loongson1/common/setup.c
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/bootinfo.h>
+
+#include <prom.h>
+
+void __init plat_mem_setup(void)
+{
+	add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
+}
+
+const char *get_system_type(void)
+{
+	unsigned int processor_id = (&current_cpu_data)->processor_id;
+
+	switch (processor_id & PRID_REV_MASK) {
+	case PRID_REV_LOONGSON1B:
+		return "LOONGSON LS1B";
+	default:
+		return "LOONGSON (unknown)";
+	}
+}
diff --git a/arch/mips/loongson1/ls1b/Makefile b/arch/mips/loongson1/ls1b/Makefile
new file mode 100644
index 0000000..891eac4
--- /dev/null
+++ b/arch/mips/loongson1/ls1b/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for loongson1B based machines.
+#
+
+obj-y += board.o
diff --git a/arch/mips/loongson1/ls1b/board.c b/arch/mips/loongson1/ls1b/board.c
new file mode 100644
index 0000000..b1a602f
--- /dev/null
+++ b/arch/mips/loongson1/ls1b/board.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <platform.h>
+
+#include <linux/serial_8250.h>
+#include <loongson1.h>
+
+static struct platform_device *loongson1_platform_devices[] __initdata = {
+	&loongson1_uart_device,
+};
+
+static int __init loongson1_platform_init(void)
+{
+	int err;
+
+	loongson1_serial_setup();
+
+	err = platform_add_devices(loongson1_platform_devices,
+				   ARRAY_SIZE(loongson1_platform_devices));
+	return err;
+}
+
+arch_initcall(loongson1_platform_init);
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index d1f2d4c..99216f0 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -89,6 +89,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	case CPU_R10000:
 	case CPU_R12000:
 	case CPU_R14000:
+	case CPU_LOONGSON1:
 		lmodel = &op_model_mipsxx_ops;
 		break;
 
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index 54759f1..03be670 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -365,6 +365,10 @@ static int __init mipsxx_init(void)
 		op_model_mipsxx_ops.cpu_type = "mips/sb1";
 		break;
 
+	case CPU_LOONGSON1:
+		op_model_mipsxx_ops.cpu_type = "mips/loongson1";
+		break;
+
 	default:
 		printk(KERN_ERR "Profiling unsupported for this CPU\n");
 
-- 
1.7.1




[Index of Archives]     [Linux MIPS Home]     [LKML Archive]     [Linux ARM Kernel]     [Linux ARM]     [Linux]     [Git]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

  Powered by Linux