Linux USB Users

• Thread Index

• Re: [2.6.39] crash in acm_ctrl_msg+0x16/0x59
  • From: Oliver Neukum <oneukum@xxxxxxx>
• The HID gadget stalls when the HID descriptor is requested
  • From: "Sebastian Bauer" <sebauer80@xxxxxx>
• Re: [PATCH] Allow marking all USB devices as {un,}authorized by default
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] Allow marking all USB devices as {un,}authorized by default
  • From: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@xxxxxxx>
• [PATCH] xhci: Fix full speed bInterval encoding some more.
  • From: Matt Evans <matt@xxxxxxxxxx>
• Re: [PATCH] Allow marking all USB devices as {un,}authorized by default
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Linux UVC driver can not handle urb_submit error
  • From: Soho Soho123 <soho123.2012@xxxxxxxxx>
• RE: [PATCH] [RFC] usb: Broaden range of vendor codes for xhci
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• Re: AudioArduino - an ALSA soundcard driver for FTDI-based Arduinos
  • From: Smilen Dimitrov <sd@xxxxxxxxxx>
• Re: [RFC] usb: don't dput() in usbfs_rmdir()
  • From: Sage Weil <sage@xxxxxxxxxxxx>
• Re: [2.6.39] crash in acm_ctrl_msg+0x16/0x59
  • From: Riccardo Magliocchetti <riccardo.magliocchetti@xxxxxxxxx>
• [PATCH] musb_host: compare status for negative error values
  • From: Németh Márton <nm127@xxxxxxxxxxx>
• [PATCH 3/3] usb: gadget: convert almost all users to the new udc infrastructure
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 2/3] usb: gadget: introduce UDC Class
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/3] usb: gadget: introduce start() and stop()
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [RFC v3] introduce UDC class
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH] drivers/net/usb/catc.c: Fix potential deadlock in catc_ctrl_run()
  • From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
• [PATCH] drivers/net/usb/catc.c: Fix potential deadlock in catc_ctrl_run()
  • From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
• Re: Linux UVC driver can not handle urb_submit error
  • From: Soho Soho123 <soho123.2012@xxxxxxxxx>
• Re: Linux UVC driver can not handle urb_submit error
  • From: Soho Soho123 <soho123.2012@xxxxxxxxx>
• Re: [BUG] OHCI crash when handover fails
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] Allow marking all USB devices as {un,}authorized by default
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: problem with usb device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: ums-realtek 2-1.4:1.0: This device (0bda,0138,3882 S 06 P 50) has unneeded SubClass and Protocol entries in unusual_devs.h (kernel 2.6.39-ck)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] usb: don't dput() in usbfs_rmdir()
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• [RFC] usb: don't dput() in usbfs_rmdir()
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: AudioArduino - an ALSA soundcard driver for FTDI-based Arduinos
  • From: sdaau <sd@xxxxxxxxxx>
• Re: Potential BUG in v2.6.39
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• RE: Potential BUG in v2.6.39
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• Re: Potential BUG in v2.6.39
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• Re: [PATCH] xhci: Remove some unnecessary casts and tidy some endian swap code
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] xhci: Bigendian fix for skip_isoc_td() and xhci_check_bandwidth()
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• RE: Potential BUG in v2.6.39
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• [PATCH] [RFC] usb: Broaden range of vendor codes for xhci
  • From: Maarten Lankhorst <m.b.lankhorst@xxxxxxxxx>
• Re: [2.6.39] crash in acm_ctrl_msg+0x16/0x59
  • From: Riccardo Magliocchetti <riccardo.magliocchetti@xxxxxxxxx>
• Re: Potential BUG in v2.6.39
  • From: Huajun Li <huajun.li.lee@xxxxxxxxx>
• Potential BUG in v2.6.39
  • From: "Brokhman Tatyana" <tlinder@xxxxxxxxxxxxxx>
• Re: A standardized way of reporting kernel events to userspace
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: AudioArduino - an ALSA soundcard driver for FTDI-based Arduinos
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] Allow marking all USB devices as {un,}authorized by default
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] Allow marking all USB devices as {un,}authorized by default
  • From: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@xxxxxxx>
• Re: [2.6.39] crash in acm_ctrl_msg+0x16/0x59
  • From: Oliver Neukum <oneukum@xxxxxxx>
• [PATCH] xhci: Remove some unnecessary casts and tidy some endian swap code
  • From: Matt Evans <matt@xxxxxxxxxx>
• [PATCH] xhci: Bigendian fix for skip_isoc_td() and xhci_check_bandwidth()
  • From: Matt Evans <matt@xxxxxxxxxx>
• AudioArduino - an ALSA soundcard driver for FTDI-based Arduinos
  • From: sdaau <sd@xxxxxxxxxx>
• ums-realtek 2-1.4:1.0: This device (0bda,0138,3882 S 06 P 50) has unneeded SubClass and Protocol entries in unusual_devs.h (kernel 2.6.39-ck)
  • From: Bc. Slavomír Današ <slavomir.danas@xxxxxxxxx>
• Etron USB 3.0 - kernel log
  • From: "Michael Niederle" <mniederle@xxxxxx>
• [PATCH] at91_udc: include linux/prefetch.h explicitly
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: Prolific PL-3507 USB/1394 bridge latest firmware doesn't have off-by-one bug
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Etron USB 3.0
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Kernel BUG after removing USB device
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Prolific PL-3507 USB/1394 bridge latest firmware doesn't have off-by-one bug
  • From: markk@xxxxxxxxxxx
• Re: Kernel BUG after removing USB device
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Etron USB 3.0
  • From: "Dipl.-Ing. Michael Niederle" <mniederle@xxxxxx>
• Re: Etron USB 3.0
  • From: Greg KH <greg@xxxxxxxxx>
• Etron USB 3.0
  • From: Michael Niederle <mniederle@xxxxxx>
• RE: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• [Pull request] USB: xHCI patches for 2.6.40
  • From: Greg KH <gregkh@xxxxxxx>
• [PATCH 9/9] Intel xhci: Limit number of active endpoints to 64.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 8/9] Intel xhci: Ignore spurious successful event.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 7/9] Intel xhci: Support EHCI/xHCI port switching.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 6/9] Intel xhci: Add PCI id for Panther Point xHCI host.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 5/9] xhci: STFU: Be quieter during URB submission and completion.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 4/9] xhci: STFU: Don't print event ring dequeue pointer.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 3/9] xhci: STFU: Remove function tracing.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 2/9] xhci: Don't submit commands when the host is dead.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 1/9] xhci: Clear stopped_td when Stop Endpoint command completes.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [Pull request] xHCI patches for 2.6.40?
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: A standardized way of reporting kernel events to userspace
  • From: Greg KH <greg@xxxxxxxxx>
• A standardized way of reporting kernel events to userspace
  • From: Arvid Brodin <arvid.brodin@xxxxxxxx>
• Re: How best to get over-current notification to user application?
  • From: Arvid Brodin <arvid.brodin@xxxxxxxx>
• Re: [RFC v4] Intel xhci: Support EHCI/xHCI port switching.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: option driver, ZTE MF_330 matches linux usb 2.0 root hub
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 2/3] usb: gadget: introduce UDC Class
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• [RFC v4] Intel xhci: Support EHCI/xHCI port switching.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC v3] Intel xhci: Support EHCI/xHCI port switching.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Kernel BUG after removing USB device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC v3] Intel xhci: Support EHCI/xHCI port switching.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Kernel BUG after removing USB device
  • From: Bruce Guenter <bruce@xxxxxxxxxxxxxx>
• Re: [RFC v3] Intel xhci: Support EHCI/xHCI port switching.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC v3] Intel xhci: Support EHCI/xHCI port switching.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC v3] Intel xhci: Support EHCI/xHCI port switching.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC v3] Intel xhci: Support EHCI/xHCI port switching.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC v3] Intel xhci: Support EHCI/xHCI port switching.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [BUG] OHCI crash when handover fails
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC v3] Intel xhci: Support EHCI/xHCI port switching.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Prolific PL-3507 USB/1394 bridge latest firmware doesn't have off-by-one bug
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Anyone with experiences of using g_hid with multitouch reports?
  • From: Pablo Cases <pablo.cases@xxxxxxxxxxxx>
• Re: option driver, ZTE MF_330 matches linux usb 2.0 root hub
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: Prolific PL-3507 USB/1394 bridge latest firmware doesn't have off-by-one bug
  • From: markk@xxxxxxxxxxx
• Re: option driver, ZTE MF_330 matches linux usb 2.0 root hub
  • From: Greg KH <greg@xxxxxxxxx>
• Re: option driver, ZTE MF_330 matches linux usb 2.0 root hub
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: [PATCH] usb: musb: gadget: clear PKTRDY flags when set FLUSHFIFO
  • From: Yauheni Kaliuta <yauheni.kaliuta@xxxxxxxxx>
• Re: [RFC v3] Intel xhci: Support EHCI/xHCI port switching.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: option driver, ZTE MF_330 matches linux usb 2.0 root hub
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• [RFC v3] Intel xhci: Support EHCI/xHCI port switching.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb-gadget: unlock data->lock mutex on error path in ep_write()
  • From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
• [PATCH] usbip: remove extra whitespace
  • From: Németh Márton <nm127@xxxxxxxxxxx>
• Re: [RFC v2 2/4] Intel xhci: Support EHCI/xHCI port switching.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [BUG] OHCI crash when handover fails
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [BUG] OHCI crash when handover fails
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [BUG] OHCI crash when handover fails
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: option driver, ZTE MF_330 matches linux usb 2.0 root hub
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [RFC v2 2/4] Intel xhci: Support EHCI/xHCI port switching.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [BUG] OHCI crash when handover fails
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [RFC 2/4] Intel xhci: Support EHCI/xHCI port switching.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [RFC 2/4] Intel xhci: Support EHCI/xHCI port switching.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [BUG] OHCI crash when handover fails
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• [BUG] OHCI crash when handover fails
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• [RFC v2 4/4] Intel xhci: Limit number of active endpoints to 64.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC v2 3/4] Intel xhci: Ignore spurious successful event.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC v2 2/4] Intel xhci: Support EHCI/xHCI port switching.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC v2 1/4] Intel xhci: Add PCI id for Panther Point xHCI host.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC v2 0/4] xhci: Support Intel Panther Point chipsets
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC 2/4] Intel xhci: Support EHCI/xHCI port switching.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: option driver, ZTE MF_330 matches linux usb 2.0 root hub
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• option driver, ZTE MF_330 matches linux usb 2.0 root hub
  • From: Michael Tokarev <mjt@xxxxxxxxxx>
• Re: [RFC 2/4] Intel xhci: Support EHCI/xHCI port switching.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Linux UVC driver can not handle urb_submit error
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 3/4] Intel xhci: Ignore spurious successful event.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 3/4] Intel xhci: Ignore spurious successful event.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC 2/4] Intel xhci: Support EHCI/xHCI port switching.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC 2/4] Intel xhci: Support EHCI/xHCI port switching.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 3/4] Intel xhci: Ignore spurious successful event.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 2/4] Intel xhci: Support EHCI/xHCI port switching.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 2/4] Intel xhci: Support EHCI/xHCI port switching.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC 3/4] Intel xhci: Ignore spurious successful event.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb/gadget: composite.c missing null pointer check
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 2/4] Intel xhci: Support EHCI/xHCI port switching.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC 2/4] Intel xhci: Support EHCI/xHCI port switching.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [patch 2/2] usbhid: fix some error codes in hiddev_connect()
  • From: Dan Carpenter <error27@xxxxxxxxx>
• Re: [PATCH 2/3] usb: gadget: introduce UDC Class
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: 2.6.38: rt2800usb: driver is crashing the kernel
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: [RFC 2/4] Intel xhci: Support EHCI/xHCI port switching.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: "Brokhman Tatyana" <tlinder@xxxxxxxxxxxxxx>
• Re: Linux UVC driver can not handle urb_submit error
  • From: Soho Soho123 <soho123.2012@xxxxxxxxx>
• Re: [uclinux-dist-devel] [PATCH] USB: net2272: driver for PLX NET2272 USB device controller
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• [PATCH v2] USB: net2272: driver for PLX NET2272 USB device controller
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: [PATCH] usb/gadget: composite.c missing null pointer check
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Linux UVC driver can not handle urb_submit error
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb/gadget: composite.c missing null pointer check
  • From: Jon Pry <jonpry@xxxxxxxxx>
• Re: read usb host controller operational register values
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: How best to get over-current notification to user application?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 2/4] Intel xhci: Support EHCI/xHCI port switching.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: net2272: driver for PLX NET2272 USB device controller
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 3/4] Intel xhci: Ignore spurious successful event.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 2/4] Intel xhci: Support EHCI/xHCI port switching.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 1/4] Intel xhci: Add PCI id for Panther Point xHCI host.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [patch 2/2] usbhid: fix some error codes in hiddev_connect()
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [patch 1/2] usbhid: use after free
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: read usb host controller operational register values
  • From: Amit Nagal <helloin.amit@xxxxxxxxx>
• read usb host controller operational register values
  • From: Amit Nagal <helloin.amit@xxxxxxxxx>
• Re: [PATCH] usb-gadget: unlock data->lock mutex on error path in ep_write()
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [OFF TOPIC] away on business travel
  • From: Felipe Balbi <balbi@xxxxxx>
• [patch 2/2] usbhid: fix some error codes in hiddev_connect()
  • From: Dan Carpenter <error27@xxxxxxxxx>
• [patch 1/2] usbhid: use after free
  • From: Dan Carpenter <error27@xxxxxxxxx>
• Re: How best to get over-current notification to user application?
  • From: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
• Re: [RFC 2/4] Intel xhci: Support EHCI/xHCI port switching.
  • From: Hans Petter Selasky <hselasky@xxxxxxx>
• Re: [PATCH] usb: musb: gadget: clear PKTRDY flags when set FLUSHFIFO
  • From: Yauheni Kaliuta <yauheni.kaliuta@xxxxxxxxx>
• [PATCH] usbip: remove check for negative values for an unsigned value
  • From: Németh Márton <nm127@xxxxxxxxxxx>
• Re: USBIP protocol documentation?
  • From: Németh Márton <nm127@xxxxxxxxxxx>
• Re: [RFC 2/4] Intel xhci: Support EHCI/xHCI port switching.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [RFC 0/3] xhci: Remove useless debugging
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] usb/gadget: (fusb300_udc) Remove unused function fusb300_ep0_complete
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] musb: fix prefetch build failure
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] usb-gadget: unlock data->lock mutex on error path in ep_write()
  • From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
• RE: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• Re: Linux UVC driver can not handle urb_submit error
  • From: Soho Soho123 <soho123.2012@xxxxxxxxx>
• [PATCH] USB: net2272: driver for PLX NET2272 USB device controller
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: Linux UVC driver can not handle urb_submit error
  • From: Soho Soho123 <soho123.2012@xxxxxxxxx>
• Re: Linux UVC driver can not handle urb_submit error
  • From: Soho Soho123 <soho123.2012@xxxxxxxxx>
• [RFC 4/4] Intel xhci: Limit number of active endpoints to 64.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 3/4] Intel xhci: Ignore spurious successful event.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 2/4] Intel xhci: Support EHCI/xHCI port switching.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 1/4] Intel xhci: Add PCI id for Panther Point xHCI host.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 0/4] xhci: Support Intel Panther Point chipsets
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 3/3] xhci: STFU: Be quieter during URB submission and completion.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 2/3] xhci: STFU: Don't print event ring dequeue pointer.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 1/3] xhci: STFU: Remove function tracing.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 0/3] xhci: Remove useless debugging
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 2/2] xhci: Don't submit commands when the host is dead.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 1/2] xhci: Clear stopped_td when Stop Endpoint command completes.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 0/2] xHCI bug fixes
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: gadget: introduce UDC Class
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: gadget: introduce UDC Class
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• RE: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: "Brokhman Tatyana" <tlinder@xxxxxxxxxxxxxx>
• Re: Linux UVC driver can not handle urb_submit error
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: gadget: introduce UDC Class
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Linux UVC driver can not handle urb_submit error
  • From: Soho Soho123 <soho123.2012@xxxxxxxxx>
• RE: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: "Brokhman Tatyana" <tlinder@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: gadget: clear PKTRDY flags when set FLUSHFIFO
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] usb: musb: gadget: clear PKTRDY flags when set FLUSHFIFO
  • From: Yauheni Kaliuta <yauheni.kaliuta@xxxxxxxxx>
• Re: [PATCH 2/3] usb: gadget: introduce UDC Class
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• Re: [PATCH] usb: musb: gadget: clear PKTRDY flags when set FLUSHFIFO
  • From: Yauheni Kaliuta <yauheni.kaliuta@xxxxxxxxx>
• Re: [PATCH 2/3] usb: gadget: introduce UDC Class
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: dmesg pointer for ums-realtek
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: How best to get over-current notification to user application?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: gadget: clear PKTRDY flags when set FLUSHFIFO
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: How best to get over-current notification to user application?
  • From: Oliver Neukum <oneukum@xxxxxxx>
• RE: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Linux UVC driver can not handle urb_submit error
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: How best to get over-current notification to user application?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• How best to get over-current notification to user application?
  • From: Arvid Brodin <arvid.brodin@xxxxxxxx>
• RE: [PATCH v13 5/8] usb:gadget: Add SuperSpeed support to the Gadget Framework
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• [PATCH] usb: musb: gadget: clear PKTRDY flags when set FLUSHFIFO
  • From: yauheni.kaliuta@xxxxxxxxx
• Re: [PATCH] musb: fix prefetch build failure
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] musb: fix prefetch build failure
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• RE: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• Re: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• Re: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• Re: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• Re: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• Re: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: MUSB, strange incoming URBs
  • From: "Andrew V. Stepanov" <andrusha@xxxxxxxxx>
• MUSB, strange incoming URBs
  • From: "Andrew V. Stepanov" <andrusha@xxxxxxxxx>
• [PATCH] Fix lsusb double-free
  • From: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@xxxxxxx>
• [PATCH] Fix lsusb out-of-bounds write
  • From: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@xxxxxxx>
• usbip: stub_dev.c: store_sockfd() + sockfd variable?
  • From: Németh Márton <nm127@xxxxxxxxxxx>
• Re: USBIP protocol documentation?
  • From: Németh Márton <nm127@xxxxxxxxxxx>
• RE: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• Re: xhci chip support
  • From: Francesco Castelli <fcastelli05@xxxxxxxxx>
• Re: USBIP protocol documentation?
  • From: matt mooney <mfm@xxxxxxxxxxxxx>
• Re: Linux UVC driver can not handle urb_submit error
  • From: Soho Soho123 <soho123.2012@xxxxxxxxx>
• Re: lsusb segfault
  • From: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@xxxxxxx>
• Re: [USB] Use normalized sense when emulating autosense
  • From: Luben Tuikov <ltuikov@xxxxxxxxx>
• Re: lsusb segfault
  • From: Greg KH <greg@xxxxxxxxx>
• lsusb segfault
  • From: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@xxxxxxx>
• Re: USBIP protocol documentation?
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [USB] Use normalized sense when emulating autosense
  • From: Greg KH <greg@xxxxxxxxx>
• usbip_xmit() + "send" parameter?
  • From: Németh Márton <nm127@xxxxxxxxxxx>
• Re: USBIP protocol documentation?
  • From: Németh Márton <nm127@xxxxxxxxxxx>
• Re: [USB] Use normalized sense when emulating autosense
  • From: Dan McGee <dpmcgee@xxxxxxxxx>
• USBIP protocol documentation?
  • From: Németh Márton <nm127@xxxxxxxxxxx>
• dmesg pointer for ums-realtek
  • From: "Adrian C." <anrxc@xxxxxxxxxxxx>
• Re: USBIP protocol documentation?
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v4] CDC NCM: release interfaces fix in unbind()
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v13 5/8] usb:gadget: Add SuperSpeed support to the Gadget Framework
  • From: Mike Frysinger <vapier.adi@xxxxxxxxx>
• Re: [PATCH v12 4/8] usb:gadget: Add SuperSpeed support to the Gadget Framework
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: [PATCH v4] CDC NCM: release interfaces fix in unbind()
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH v4] CDC NCM: release interfaces fix in unbind()
  • From: Alexey Orishko <alexey.orishko@xxxxxxxxx>
• Re: Linux UVC driver can not handle urb_submit error
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Linux UVC driver can not handle urb_submit error
  • From: Soho Soho123 <soho123.2012@xxxxxxxxx>
• Re: Prolific PL-3507 USB/1394 bridge latest firmware doesn't have off-by-one bug
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Bluetooth USB BCM2046
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v3] CDC NCM: release interfaces fix in unbind()
  • From: Alexey ORISHKO <alexey.orishko@xxxxxxxxxxxxxx>
• Re: [PATCH v3] CDC NCM: release interfaces fix in unbind()
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Prolific PL-3507 USB/1394 bridge latest firmware doesn't have off-by-one bug
  • From: markk@xxxxxxxxxxx
• RE: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• Re: Bluetooth USB BCM2046
  • From: Paulo Edgar Castro <pauloedgarcastro@xxxxxxxxx>
• Re: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• Re: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Bluetooth USB BCM2046
  • From: Paulo Edgar Castro <pauloedgarcastro@xxxxxxxxx>
• [PATCH/RESEND v13 1/8] usb: Add usb_endpoint_descriptor to be part of the struct usb_ep
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH/RESEND v13 2/8] usb: Configure endpoint according to gadget speed.
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH/RESEND v13 3/8] usb: Modify existing gadget drivers to use config_ep_by_speed() instead of ep_choose.
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH v13 4/8] usb: coding style fix
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH v13 5/8] usb:gadget: Add SuperSpeed support to the Gadget Framework
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH v13 8/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH/RESEND v13 7/8] usb:dummy_hcd: use the shared_hcd infrastructure
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH/RESEND v13 6/8] usb: Add streams support to the gadget framework
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH v13 0/8] usb gadget: Add SuperSpeed support to the Gadget Framework
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH 1/3] MIPS: Alchemy: abstract USB block control register access
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• Re: Bluetooth USB BCM2046
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• RE: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• RE: [PATCH v12 4/8] usb:gadget: Add SuperSpeed support to the Gadget Framework
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• Re: [PATCH v12 4/8] usb:gadget: Add SuperSpeed support to the Gadget Framework
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• RE: [PATCH v12 4/8] usb:gadget: Add SuperSpeed support to the Gadget Framework
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• Re: [patch 1/1] USB: yurex: recognize GeneralKeys wireless presenter as generic HID
  • From: Greg KH <gregkh@xxxxxxx>
• [patch 1/1] USB: yurex: recognize GeneralKeys wireless presenter as generic HID
  • From: akpm@xxxxxxxxxxxxxxxxxxxx
• Re: [PATCH v12 4/8] usb:gadget: Add SuperSpeed support to the Gadget Framework
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: [PATCH v3] CDC NCM: release interfaces fix in unbind()
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB cache flush
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v12 7/8] usb: Adding SuperSpeed support to dummy_hcd
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: USB cache flush
  • From: Jun OKAJIMA <okajima@xxxxxxxxxxxxxxxxxx>
• Re: Bluetooth USB BCM2046
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Bluetooth USB BCM2046
  • From: Paulo Edgar Castro <pauloedgarcastro@xxxxxxxxx>
• [PATCH 205/205] USB: EHCI: Remove SPARC_LEON {read,write}_be definitions from ehci.h
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 204/205] USB: UHCI: Support big endian GRUSBHC HC
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 203/205] sparc: add {read,write}*_be routines
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 199/205] usb-storage: Correct adjust_quirks to include latest flags
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 202/205] USB: UHCI: Add support for big endian descriptors
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 201/205] USB: UHCI: Use ACCESS_ONCE rather than using a full compiler barrier
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 200/205] USB: UHCI: Add support for big endian mmio
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 198/205] usb/isp1760: Fix possible unlink problems
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 197/205] usb/isp1760: Move function isp1760_endpoint_disable() within file.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 196/205] USB: remove remaining usages of hcd->state from usbcore and fix regression
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 195/205] usb: musb: ux500: add configuration and build options for ux500 dma
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 194/205] usb: musb: ux500: add dma glue layer for ux500
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 193/205] usb: musb: ux500: add dma name for ux500
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 192/205] usb: musb: ux500: add ux500 specific code for gadget side
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 191/205] usb: musb: fix compile error
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 190/205] usb-storage: fix up the unusual_realtek device list
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 189/205] USB: gadget: f_audio: Fix invalid dereference of initdata
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 186/205] USB: OTG: msm: Free VCCCX regulator even if we can't set the voltage
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 188/205] EHCI: don't rescan interrupt QHs needlessly
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 187/205] OHCI: fix regression caused by nVidia shutdown workaround
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 185/205] USB: OTG: msm: Allow the widest possible range for VDDCX when removing
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 184/205] USB: option: add support for Huawei E353 device
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 183/205] xhci: Fix memory leak bug when dropping endpoints
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 182/205] xhci: Fix memory leak in ring cache deallocation.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 181/205] xhci: Fix full speed bInterval encoding.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 180/205] usb: gadget: rndis: don't test against req->length
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 179/205] usb/gadget: at91sam9g20 fix end point max packet size
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 178/205] drivers/usb/serial/opticon.c: Release resources on kmalloc failure
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 177/205] USB: s3c-hsotg: return proper error if clk_get fails
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 176/205] USB: s3c-hsotg: fix checkpatch warnings
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 175/205] USB: s3c-hsudc: fix checkpatch error and warning
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 174/205] USB: s3c-hsudc: use IS_ERR() instead of NULL check
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 173/205] MAINTAINERS: tree moved to kernel.org
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 172/205] usb: musb: Calling VBUS pulsing API when SRP is initiated.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 171/205] usb: otg: TWL6030: OMAP4430: Adding SRP VBUS pulsing API
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 170/205] usb: musb: host: remove duplicate check in musb_ep_program()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 169/205] usb: musb: export musb_interrupt symbol
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 168/205] usb: musb: allow musb and glue layers to be modules
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 167/205] usb: musb: drop unneeded musb_debug trickery
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 166/205] xhci: move the common code to a function to get max ports and port array
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 165/205] ehci: workaround for pci quirk timeout on ExoPC
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 164/205] ehci: pci quirk cleanup
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 163/205] xhci: Fix bug in control transfer cancellation.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 162/205] usb: renesas_usbhs: fixup error processing on probe/remove
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 161/205] usb: renesas_usbhs: fixup fifo disable
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 160/205] USB: cdc_acm: Fix oops when Droids MuIn LCD is connected
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 159/205] USB: Gadget: Add Samsung S3C24XX USB High-Speed controller driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 158/205] ARM: S3C2416: Add support for USB 2.0 High-Speed gadget controller
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 157/205] ARM: S3C24XX: Add plaform device definition for USB High-Speed gadget controller.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 155/205] usb: gadget: Remove the LUN checks which are always true
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 156/205] ARM: S3C2416: Add USB Phy register definitions
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 154/205] usb: fix warning in usbtest module v2
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 153/205] USB: ehci-s5p : use __devinit and __devexit macros for probe and remove
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 152/205] USB: cp210x: fix typo, Telegesys should have been Telegesis
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 151/205] usb: gadget: f_mass_storage: Make us pass USBCV MSC Compliance tests
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 150/205] usb: gadget: composite: Allow function drivers to pause control transfers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 149/205] xHCI 1.0: Max Exit Latency Too Large Error
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 148/205] xHCI 1.0: TT_THINK_TIME set
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 147/205] xHCI 1.0: Block Interrupts for Isoch transfer
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 146/205] xHCI 1.0: Isoch endpoint CErr field set
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 145/205] xHCI 1.0: Control endpoint average TRB length field set
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 144/205] xHCI 1.0: Setup Stage TRB Transfer Type flag
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 141/205] USB: OTG: msm: Implement charger detection
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 143/205] USB: OTG: msm: Add PHY suspend support for MSM8960
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 139/205] USB: UHCI: Add support for GRLIB GRUSBHC controller
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 142/205] USB: OTG: msm: Configure PHY Analog and Digital voltage domains
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 138/205] USB: UHCI: Support non-PCI host controllers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 140/205] USB: OTG: msm: vote for dayatona fabric clock
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 137/205] USB: UHCI: Wrap I/O register accesses
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 136/205] USB: UHCI: Move PCI specific functions to uhci-pci.c
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 135/205] USB: UHCI: Codingstyle fixes
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 134/205] USB: UHCI: Allow dynamic assignment of bus specific functions
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 133/205] USB: UHCI: Remove PCI dependencies from uhci-hub
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 132/205] fsl/usb: Unused endpoint failure for USB gadget
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 131/205] USB: ohci-s3c2410: return proper error if clk_get fails
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 125/205] USB: OTG: msm: Clear in_lpm flag before enabling the IRQ in resume
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 130/205] USB: ohci-s3c2410: fix checkpatch errors and warnings
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 129/205] USB: ehci-au1xxx: fix suspend callback
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 128/205] usb: fix building musb drivers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 126/205] USB: EHCI: Support controllers with big endian capability regs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 127/205] USB: EHCI: Add bus glue for GRLIB GRUSBHC controller
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 124/205] USB: gadget: Initialize ep0 once while registering gadget in ci13xxx_udc
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 123/205] USB: gadget: Use ep0out for control OUT data phase in ci13xxx_udc
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 122/205] USB: gadget: Fix bug in endpoint feature request processing in ci13xxx_udc
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 121/205] USB: gadget: Fix unused variable warning in ci13xxx_udc
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 120/205] USB: gadget: Use bitwise AND operator to test flags in ci13xxx_udc
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 119/205] USB: gadget: Fix typo (s/EBUSY/-EBUSY) in ci13xxx_udc
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 118/205] USB: gpio-vbus: ask for vbus_draw regulator before registering xceiv
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 117/205] USB: ldusb: add several new devices
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 116/205] USB: ehci: remove structure packing from ehci_def
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 115/205] usb: Configure octeon2 glue logic for proper uSOF cycle period.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 114/205] usb: octeon2-common.c: Configure ports for proper electrical characteristics.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 113/205] USB: octeon2-common: Don't reinitialize the clocks.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 112/205] usb/isp1760: Improve urb queueing, get rid of BUG():s in normal code paths
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 111/205] usb/isp1760: Report correct urb status after unlink
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 110/205] usb/isp1760: Remove unneeded OR map and HcBufferStatus code
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 109/205] usb/isp1760: Clean up urb enqueueing
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 108/205] usb/isp1760: Remove false error printout
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 107/205] USB: s3c-hsotg: Add copyright string
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 106/205] USB: s3c-hsotg: Fix hang up after reset
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 105/205] USB: s3c-hsotg: Fix stall condition processing
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 104/205] USB: s3c-hsotg: Fix control request processing
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 103/205] USB: s3c-hsotg: Fix interrupt cleaning code
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 102/205] USB: s3c-hsotg: Fix core reset
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 101/205] USB: extend ehci-fsl and fsl_udc_core driver for OTG operation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 100/205] USB: add Freescale USB OTG Transceiver driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 099/205] USB: fsl_udc_core: support device mode of MPC5121E DR USB Controller
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 098/205] USB: fsl_udc_core: prepare for SoCs with BE registers and descriptors
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 097/205] USB: fix build of FSL MPH DR OF platform driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 096/205] USB: ehci-fsl: add MPC5121E specific suspend and resume
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 095/205] xhci 1.0: Set transfer burst last packet count field.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 092/205] xhci 1.0: Only interrupt on short packet for IN EPs.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 093/205] xhci 1.0: Update TD size field format.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 094/205] xhci 1.0: Set transfer burst count field.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 091/205] xhci: Remove sparse warning about cmd_status.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 090/205] usbcore: warm reset USB3 port in SS.Inactive state
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 089/205] usbcore: Refine USB3.0 device suspend and resume
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 088/205] xHCI: report USB3.0 portstatus comply with USB3.0 specification
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 087/205] xHCI: Set link state support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 086/205] xHCI: Clear link state change support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 085/205] xHCI: warm reset support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 084/205] usb/ch9: use proper endianess for wBytesPerInterval
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 083/205] xhci: Remove recursive call to xhci_handle_event
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 082/205] xhci: Add an assertion to check for virt_dev=0 bug.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 081/205] xhci: Add rmb() between reading event validity & event data access.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 080/205] xhci: Make xHCI driver endian-safe
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 079/205] usb: factor out state_string() on otg drivers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 078/205] usb/usbtest: fix test10 on superpseed
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 077/205] usb/usbtest: print super on super speed
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 076/205] xhci-hcd: Include <linux/slab.h> in xhci-pci.c
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 075/205] usb: core: Change usb_create_sysfs_intf_files()' return type to void
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 074/205] USB: add queued-unlinks test case to usbtest driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 072/205] USB: ohci-s3c2410: use resource_size()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 073/205] USB: ehci: tegra: fix USB1 port reset issue
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 067/205] usb: renesas_usbhs: add autonomy mode
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 071/205] USB: ohci-s3c2410: use __devinit and __devexit macros for probe and remove
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 069/205] usb/dummy_hcd: don't probe for udc if hcd failed
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 070/205] usb: gadget: storage_common: use kstrto*() [bug fix]
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 068/205] usb/hcd: don't return 0 on error in usb_add_hcd()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 066/205] usb: renesas_usbhs: use delayed_work instead of work_struct
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 065/205] usb: renesas_usbhs: prevent NULL pointer crash
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 064/205] usb: renesas_usbhs: add power control function
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 063/205] usb: renesas_usbhs: move pdev_to_priv to global
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 062/205] usb: renesas_usbhs: add error reason for usbhs_pipe_malloc
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 061/205] usb: renesas_usbhs: remove callback when module removed.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 060/205] usb: renesas_usbhs: return error if wrong recip request
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 059/205] usb: renesas_usbhs: modify spinlock method
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 058/205] usb: renesas_usbhs: don't re-allocation pipe buffer
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 057/205] usb: renesas_usbhs: modify fifo clear timing
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 056/205] USB: g_printer required set interface request
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 055/205] USB: dbpg gadget: dont mask out direction bit
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 054/205] USB: dbgp gadget: set MaxpacketSize0
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 053/205] USB: dbgp gadget: fix return value of dbgp_setup
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 052/205] usb: renesas_usbhs: Driver is depend on SuperH
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 051/205] usb: renesas_usbhs: fixup cast warning
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 050/205] USB: documentation update for the pre_reset method
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 049/205] Bind only modem AT command endpoint to option module.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 048/205] USB: cdc-wdm: reset handling according to new requirements
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 047/205] USB: gamin_gps: Fix for data transfer problems in native mode
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 046/205] USB: gadget: g_multi: fixed vendor and product ID in inf files
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 045/205] USB: serial: ftdi_sio: adding support for TavIR STK500
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 044/205] USB: moto_modem: Add USB identifier for the Motorola VE240.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 043/205] USB: CP210x Add 4 Device IDs for AC-Services Devices
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 042/205] Revert "usb: usb_storage: do not align length of request for CBW to maxp size"
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 041/205] usb: gadget: storage_common: use kstrto*()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 040/205] USB: ohci: add bus glue for the Atheros AR71XX/AR7240 SoCs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 039/205] USB: ehci: add workaround for Synopsys HC bug
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 038/205] USB: ehci: add bus glue for the Atheros AR71XX/AR724X/AR91XX SoCs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 037/205] ARM: EXYNOS4: Add usb ehci device to the NURI board
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 036/205] USB: Add initial S5P EHCI driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 035/205] ARM: EXYNOS4: Add usb host phy control
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 034/205] ARM: S5P: Add usb ehci device
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 033/205] Revert "USB: sam-ba: add driver for Atmel SAM Boot Assistant (SAM-BA)"
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 032/205] USB: twl4030-usb: Report correct vbus value for accessory charger adapters1
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 031/205] USB: Mark ehci_adjust_port_wakeup_flags as __maybe_unused
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 030/205] usb: fix a typo in a comment
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 029/205] usb/otg: fix twl6030 macro
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 028/205] usb: gadget: f_mass_storage: If 'ro'/'cdrom' specified, open file as read-only
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 027/205] usb: gadget: f_mass_storage: Fix Bulk-only RESET handling
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 026/205] usb: u132-hcd: Drop __TIME__ usage
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 025/205] usb: ftdi-elan: Drop __TIME__ usage
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 024/205] USB: UHCI: don't try to revive a dead controller
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 023/205] USB: UHCI: remove uses of hcd->state
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 022/205] usb: don't enter usb subdirectories directly
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 021/205] usb gadget: fix all Section mismatch warnings
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 020/205] USB: sl811: add Kconfig option for ISOCHRONOUS mode
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 019/205] USB: g_file_storage: don't send padding when stall=n
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 018/205] USB: remove dead code from usb_deregister_dev()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 017/205] usb: usb_storage: do not align length of request for CBW to maxp size
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 016/205] USB: cdc-acm: re-write read processing
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 015/205] USB: cdc-acm: clean up read urb allocation
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 014/205] USB: cdc-acm: clean up open error handling
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 013/205] USB: cdc-acm: clean up rx_buflimit references
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 012/205] USB: cdc-acm: remove unused drain-delay code
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 011/205] USB: cdc-acm: remove superfluous prototype
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 010/205] USB: cdc-acm: remove version information and changelog
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 009/205] USB: cdc-acm: use dev_vdbg in read/write paths
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 008/205] USB: cdc-acm: clean up verbose debug
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 006/205] USB: cdc-acm: clean up dev_err and dev_dbg
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 007/205] USB: cdc-acm: replace dbg macros with dev_dbg
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 005/205] USB: cdc-acm: use dev_err to report failed allocations
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 004/205] USB: cdc-acm: add missing newlines to dev_dbg and dev_err
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 003/205] USB: change the way we initialize format strings
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 002/205] usb: renesas_usbhs: Add Renesas USBHS Gadget
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 001/205] usb: renesas_usbhs: Add Renesas USBHS common code
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 002/205] usb: renesas_usbhs: Add Renesas USBHS Gadget
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 004/205] USB: cdc-acm: add missing newlines to dev_dbg and dev_err
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 039/205] USB: ehci: add workaround for Synopsys HC bug
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 038/205] USB: ehci: add bus glue for the Atheros AR71XX/AR724X/AR91XX SoCs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 026/205] usb: u132-hcd: Drop __TIME__ usage
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>