From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
This patch (as1456) removes all uses of hcd->state from the uhci-hcd
driver, as part of the overall strategy to eliminate hcd->state
completely. Now when a controller dies we call usb_hc_died()
directly, instead of relying on the core interrupt handler to see that
hcd->state has changed to HC_STATE_HALT and make the call for us.
Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/usb/host/uhci-hcd.c | 7 +------
1 files changed, 1 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 4f65b14..73db556 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -139,7 +139,6 @@ static void finish_reset(struct uhci_hcd *uhci)
uhci->port_c_suspend = uhci->resuming_ports = 0;
uhci->rh_state = UHCI_RH_RESET;
uhci->is_stopped = UHCI_IS_STOPPED;
- uhci_to_hcd(uhci)->state = HC_STATE_HALT;
clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags);
uhci->dead = 0; /* Full reset resurrects the controller */
@@ -188,10 +187,6 @@ static void configure_hc(struct uhci_hcd *uhci)
outw(uhci->frame_number & UHCI_MAX_SOF_NUMBER,
uhci->io_addr + USBFRNUM);
- /* Mark controller as not halted before we enable interrupts */
- uhci_to_hcd(uhci)->state = HC_STATE_SUSPENDED;
- mb();
-
/* Enable PIRQ */
pci_write_config_word(pdev, USBLEGSUP, USBLEGSUP_DEFAULT);
@@ -360,7 +355,6 @@ __acquires(uhci->lock)
static void start_rh(struct uhci_hcd *uhci)
{
- uhci_to_hcd(uhci)->state = HC_STATE_RUNNING;
uhci->is_stopped = 0;
/* Mark it configured and running with a 64-byte max packet.
@@ -449,6 +443,7 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd)
lprintk(errbuf);
}
uhci_hc_died(uhci);
+ usb_hc_died(hcd);
/* Force a callback in case there are
* pending unlinks */
--
1.7.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
