Linux USB Users

• Thread Index

• Re: Linux USB file storage gadget with new UDC
  • From: victor yeo <victoryeo1974@xxxxxxxxx>
• Re: [PATCH] usbfs: Always allow ctrl requests with USB_RECIP_ENDPOINT on the ctrl ep
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Driver for PL-2303 HX not working
  • From: Karsten Malcher <debian@xxxxxxxxxxx>
• Re: [PATCH] usbfs: Always allow ctrl requests with USB_RECIP_ENDPOINT on the ctrl ep
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH] usbfs: Always allow ctrl requests with USB_RECIP_ENDPOINT on the ctrl ep
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usbfs: Always allow ctrl requests with USB_RECIP_ENDPOINT on the ctrl ep
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Why usb's remote wakeup relys on CONFIG_USB_SUSPEND
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3] usb host: Faraday USB2.0 FUSBH200-HCD driver
  • From: Yuan-Hsin Chen <yuanlmm@xxxxxxxxx>
• [RFC PATCH 2/2] USB: OHCI: make ohci-pci a separate driver
  • From: manjunath.goudar@xxxxxxxxxx
• [RFC PATCH 1/2] USB: OHCI: prepare to make ohci-hcd a library module
  • From: manjunath.goudar@xxxxxxxxxx
• Re: [PATCH v3 1/6] drivers: phy: add generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH net,stable-3.8] net: cdc_mbim: remove bogus sizeof()
  • From: Bjørn Mork <bjorn@xxxxxxx>
• xHCI: "xhci_queue_intr_tx: XX callbacks suppressed" flooding my logs
  • From: Manuel Pégourié-Gonnard <mpg@xxxxxxxxxx>
• [PATCH] usbfs: Always allow ctrl requests with USB_RECIP_ENDPOINT on the ctrl ep
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Why usb's remote wakeup relys on CONFIG_USB_SUSPEND
  • From: linux fddl <fddllinux@xxxxxxxxx>
• Re: usb3 disk drive not being recognized properly
  • From: vekin <vekinn@xxxxxxxxx>
• usb3 disk drive not being recognized properly
  • From: vekin <vekinn@xxxxxxxxx>
• Re: [PATCH v2] xhci: fix list access before ini
  • From: Vladimir Murzin <murzin.v@xxxxxxxxx>
• RE: USB2.0 disk format failure in windows guest
  • From: "Gonglei (Arei)" <arei.gonglei@xxxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v2] xhci: fix list access before ini
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• libusbx v1.0.15 has been released
  • From: Pete Batard <pete@xxxxxxx>
• [PATCH] usb: xhci-dbg: Display endpoint number and direction in context dump
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• RE: [PATCH 04/10] staging: dwc2: disable I2CINT in dwc2_disable_host_interrupts
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH] usb: xhci-dbg: Display endpoint number and direction in context dump
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [PATCH 02/10] staging: dwc2: do not handle PRTINT in dwc2_handle_common_intr
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• RE: [PATCH 10/10] staging: dwc2: properly separate common and host interrupt enabling
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• RE: [PATCH 09/10] staging: dwc2: use functions to disable interrupts
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• RE: [PATCH 08/10] staging: dwc2: add dwc2_disable_common_interrupts function
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• RE: [PATCH 06/10] staging: dwc2: use irq_return_t for interrupt handlers
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• RE: [PATCH 05/10] staging: dwc2: introduce GINTMSK_HOST macro
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• RE: [PATCH 03/10] staging: dwc2: move some interrupt enabling around
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: USB PCI quirk issue
  • From: Yinghai Lu <yinghai@xxxxxxxxxx>
• Regression in 3735ba8db8e6ea22ad3ff524328926d8d780a884 with Freescale P1020
  • From: Michael Braun <michael.braun@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/6] drivers: phy: add generic PHY framework
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• RE: [PATCH 01/10] staging: dwc2: do not use IRQF_DISABLED
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: USB PCI quirk issue
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: USB2.0 disk format failure in windows guest
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Driver for PL-2303 HX not working
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH 07/10] staging: dwc2: Don't always return IRQ_HANDLED in dwc2_hcd_intr()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 01/10] staging: dwc2: do not use IRQF_DISABLED
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• [PATCH 08/10] staging: dwc2: add dwc2_disable_common_interrupts function
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• [PATCH 06/10] staging: dwc2: use irq_return_t for interrupt handlers
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• [PATCH 05/10] staging: dwc2: introduce GINTMSK_HOST macro
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• [PATCH 04/10] staging: dwc2: disable I2CINT in dwc2_disable_host_interrupts
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• [PATCH 07/10] staging: dwc2: Don't always return IRQ_HANDLED in dwc2_hcd_intr()
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• [PATCH 03/10] staging: dwc2: move some interrupt enabling around
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• [PATCH 10/10] staging: dwc2: properly separate common and host interrupt enabling
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• [PATCH 09/10] staging: dwc2: use functions to disable interrupts
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• [PATCH 02/10] staging: dwc2: do not handle PRTINT in dwc2_handle_common_intr
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• [PATCH 00/10] Interrupt-related cleanups
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• Re: [PATCH] usb: gadget/uvc: Implement videobuf2 .wait_prepare and .wait_finish operations
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget/uvc: Implement videobuf2 .wait_prepare and .wait_finish operations
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/6] Generic PHY Framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v3 1/6] drivers: phy: add generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v3 0/6] Generic PHY Framework
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: Cannot open two tyyACMs at a time when using 2514b USB hub
  • From: Arshad <arshad@xxxxxxxxx>
• [PATCH 1/2] USB: ehci-omap: Don't select any PHY driver
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 2/2] USB: ehci-omap: Improve PHY error handling
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 1/4] rcar-phy: add R8A7778 support
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/6] drivers: phy: add generic PHY framework
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v3 0/6] Generic PHY Framework
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• Re: [PATCH v3 0/6] Generic PHY Framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [Test Application PATCH 0/2] UVC gadget test application enhancements
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 3/4 v3] staging: dwc2: add platform device bindings
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• Re: [PATCH v3 0/6] Generic PHY Framework
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: victor yeo <victoryeo1974@xxxxxxxxx>
• Re: Driver for PL-2303 HX not working
  • From: Karsten Malcher <debian@xxxxxxxxxxx>
• Re: [PATCH] usb: ehci-s5p: skip phy setup for Exynos5440 based platforms
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: Driver for PL-2303 HX not working
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Driver for PL-2303 HX not working
  • From: Karsten Malcher <debian@xxxxxxxxxxx>
• Re: [PATCH v2] xhci: fix list access before ini
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] xhci: fix list access before ini
  • From: Vladimir Murzin <murzin.v@xxxxxxxxx>
• [PATCH v2 4/4] ARM: shmobile: BOCK-W: enable USB in defconfig
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 3/4] ARM: shmobile: BOCK-W: add USB support
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/4] ARM: shmobile: r8a7778: add USB support
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/4] rcar-phy: add R8A7778 support
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/4] Add USB support to R8A7778/BOCK-W
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 9/9] rcar-phy: handle platform data
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 8/9] ARM: shmobile: Marzen: pass platform data to USB PHY device
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 7/9] rcar-phy: add platform data
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 6/9] rcar-phy: correct base address
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 5/9] ARM: shmobile: r8a7779: remove USB PHY 2nd memory resource
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 4/9] rcar-phy: remove EHCI internal buffer setup
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 3/9] ARM: shmobile: r8a7779: setup EHCI internal buffer
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 2/9] ehci-platform: add pre_setup() method to platform data
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 0/9] Reorganize R8A7779/Marzen USB code
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/9] Reorganize R8A7779/Marzen USB code
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/9] Reorganize R8A7779/Marzen USB code
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4 v2] staging: dwc2: add platform device bindings
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• RE: [PATCH 3/4 v2] staging: dwc2: add platform device bindings
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH 3/4 v2] staging: dwc2: add platform device bindings
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• RE: [PATCH 3/4 v2] staging: dwc2: add platform device bindings
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• RE: USB Device Hibernation: Wake from resume initiated by host
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: PROBLEM: EHCI USB device resets and fails
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 4/4] staging: dwc2: load parameters from the devicetree
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH -next] staging: dwc2: fix error return code in dwc2_hcd_init()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• RE: [PATCH -next] staging: dwc2: fix error return code in dwc2_hcd_init()
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH 3/9] usb/gadget: change sysfs parent device for USB Ethernet
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: PROBLEM: EHCI USB device resets and fails
  • From: Bruce Guenter <bruce@xxxxxxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: victor yeo <victoryeo1974@xxxxxxxxx>
• Re: Fw: [Bug 56521] New: No support of Motorola ZN5 USBnet in zaurus module
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Fw: [Bug 56521] New: No support of Motorola ZN5 USBnet in zaurus module
  • From: Stephen Hemminger <stephen@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH -next] staging: dwc2: fix error return code in dwc2_hcd_init()
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• [PATCH -next] staging: dwc2: fix error return code in dwc2_hcd_init()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] staging: dwc2: load parameters from the devicetree
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• Re: [PATCH 4/4] staging: dwc2: load parameters from the devicetree
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• [PATCH 3/4 v2] staging: dwc2: add platform device bindings
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• USB Device Hibernation: Wake from resume initiated by host
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• RE: [PATCH 3/9] usb/gadget: change sysfs parent device for USB Ethernet
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: Crash in dwc3 driver on module unload
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: victor yeo <victoryeo1974@xxxxxxxxx>
• RE: Crash in dwc3 driver on module unload
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH 4/4] staging: dwc2: load parameters from the devicetree
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH v3] usb: exynos: do not include plat/usb-phy.h
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 10/30] usb: exynos: do not include plat/usb-phy.h
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] staging: dwc2: load parameters from the devicetree
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• RE: [PATCH 2/4] staging: dwc2: Make dwc2_set_uninitialized more specific
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH 4/4] staging: dwc2: load parameters from the devicetree
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH 11/11] usbnet: handle link change
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 00/11] usbnet: usbnet: handle link change
  • From: David Miller <davem@xxxxxxxxxxxxx>
• RE: [PATCH 1/4] staging: dwc2: set the driver name to "dwc2"
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH 4/4] staging: dwc2: load parameters from the devicetree
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/4] staging: dwc2: load parameters from the devicetree
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] staging: dwc2: add platform device bindings
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 4/4] staging: dwc2: load parameters from the devicetree
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH 4/4] staging: dwc2: load parameters from the devicetree
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• Re: [PATCH 3/4] staging: dwc2: add platform device bindings
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• RE: [PATCH 3/4] staging: dwc2: add platform device bindings
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• Re: [PATCH 4/4] staging: dwc2: load parameters from the devicetree
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/4] staging: dwc2: add platform device bindings
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: USB storage disconnects on xHCI only with Renesas host and ASMedia enclosure
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 2/2] staging: dwc2: register common irq handler in dwc2_core_init
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• RE: [PATCH 1/2] staging: dwc2: don't pass IRQ_LEVEL to devm_request_irq
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• Re: USB2.0 disk format failure in windows guest
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/4] staging: dwc2: load parameters from the devicetree
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• [PATCH 2/4] staging: dwc2: Make dwc2_set_uninitialized more specific
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• [PATCH 3/4] staging: dwc2: add platform device bindings
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• [PATCH 0/4] staging: dwc2: Add platform driver
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• [PATCH 1/4] staging: dwc2: set the driver name to "dwc2"
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• [PATCH 2/2] staging: dwc2: register common irq handler in dwc2_core_init
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• [PATCH 1/2] staging: dwc2: don't pass IRQ_LEVEL to devm_request_irq
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• [PATCH 0/2] staging: dwc2: Interrupt-related fixes
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• Re: [PATCH] usb-serial: add support for USB Wishbone-serial adapters
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb-serial: add support for USB Wishbone-serial adapters
  • From: "Wesley W. Terpstra" <w.terpstra@xxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH 00/11] usbnet: usbnet: handle link change
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH 08/11] usbnet: dm9601: apply usbnet_link_change
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH 00/11] usbnet: usbnet: handle link change
  • From: Jussi Kivilinna <jussi.kivilinna@xxxxxx>
• Re: [PATCH] usb-serial: add support for USB Wishbone-serial adapters
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: victor yeo <victoryeo1974@xxxxxxxxx>
• Re: [PATCH 3/9] usb/gadget: change sysfs parent device for USB Ethernet
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 11/11] usbnet: handle link change
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 00/11] usbnet: usbnet: handle link change
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 11/11] usbnet: handle link change
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 10/11] usbnet: apply usbnet_link_change
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 09/11] usbnet: sierra: apply usbnet_link_change
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 08/11] usbnet: dm9601: apply usbnet_link_change
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 07/11] usbnet: cdc-ether: apply usbnet_link_change
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 05/11] usbnet: asix: apply usbnet_link_change
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 06/11] usbnet: ax88179_1781: apply usbnet_link_change
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 04/11] usbnet: cdc_ncm: apply usbnet_link_change
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 03/11] usbnet: mcs7830: apply usbnet_link_change
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 02/11] usbnet: mcs7830: don't reset link
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 01/11] usbnet: introduce usbnet_link_change API
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb-serial: add support for USB Wishbone-serial adapters
  • From: "Wesley W. Terpstra" <w.terpstra@xxxxxx>
• Re: [PATCH] usb-serial: add support for USB Wishbone-serial adapters
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 09/26] goku_udc: Don't use create_proc_read_entry() [RFC]
  • From: David Howells <dhowells@xxxxxxxxxx>
• [PATCH 10/26] fsl_udc: Don't use create_proc_read_entry() [RFC]
  • From: David Howells <dhowells@xxxxxxxxxx>
• Re: [Libusbx-devel] libusbx v1.0.15-rc2 is now available for testing
  • From: nico <sl1200mk2@xxxxxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] usb-serial: add support for USB Wishbone-serial adapters
  • From: "Wesley W. Terpstra" <w.terpstra@xxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 9/9] usb/gadget: f_ncm: add configfs support
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 5/9] usb/gadget: f_ncm: convert to new function interface with backward compatibility
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 6/9] usb/gadget: ncm: convert to new function interface
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 3/9] usb/gadget: change sysfs parent device for USB Ethernet
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 8/9] usb/gadget: f_ncm: use usb_gstrings_attach
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 7/9] usb/gadget: f_ncm: remove compatibility layer
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 4/9] usb/gadget: u_ether: construct with default values and add setters/getters
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 1/9] usb/gadget: u_ether: convert into module
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 2/9] usb/gadget: rndis: convert into module
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• [PATCH 0/9] Equivalent of g_ncm.ko with configfs
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH] usb: ohci-exynos: skip phy setup for Exynos5440 based platforms
  • From: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
• [PATCH] usb: ehci-s5p: skip phy setup for Exynos5440 based platforms
  • From: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH] USB: ehci-omap: Select USB_PHY
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 1/1] usb: gadget/uvc: Add support for Bulk endpoint to be used as Video Streaming ep
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: victor yeo <victoryeo1974@xxxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [Libusbx-devel] libusbx v1.0.15-rc2 is now available for testing
  • From: nico <sl1200mk2@xxxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] drivers: usb: chipidea: convert to devm_ioremap_resource()
  • From: Silviu Popescu <silviupopescu1990@xxxxxxxxx>
• Re: [PATCH] drivers: usb: chipidea: convert to devm_ioremap_resource()
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 0/4] Add USB support to R8A7778/BOCK-W
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH 10/30] usb: exynos: do not include plat/usb-phy.h
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 00/30] ARM: exynos multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• RE: [PATCH v3] staging: dwc2: toggle periodic debugging output separately
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH v3] staging: dwc2: toggle periodic debugging output separately
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH] drivers: usb: chipidea: convert to devm_ioremap_resource()
  • From: Silviu-Mihai Popescu <silviupopescu1990@xxxxxxxxx>
• RE: [PATCH v3] staging: dwc2: toggle periodic debugging output separately
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• [PATCH 2/2 v5] sierra_net: keep status interrupt URB active
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• [PATCH 1/2 v5] usbnet: allow status interrupt URB to always be active
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 06/11] usb: musb: factor out hcd initalization
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH v3 06/11] usb: musb: factor out hcd initalization
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v4 03/11] usb: musb: factor some host-specific functions
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v4 02/11] usb: musb: move function declarations to musb_{host,gadget}.h
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v4 07/11] usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modes
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v4 10/11] usb: musb: use musb->port_mode
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v4 08/11] usb: musb: add musb_host_setup() and musb_host_cleanup()
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v4 11/11] usb: musb: eliminate musb_to_hcd
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v4 09/11] usb: musb: re-introduce musb->port_mode
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v4 06/11] usb: musb: factor out hcd initalization
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v4 05/11] usb: musb: move musb_start to musb_virthub.c
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v4 04/11] usb: musb: gadget: remove hcd initialization
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v4 01/11] usb: gadget: drop unused USB_GADGET_MUSB_HDRC
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v4 00/11] usb: musb: add back support for host mode
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v3 06/11] usb: musb: factor out hcd initalization
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH v3 06/11] usb: musb: factor out hcd initalization
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH v3 06/11] usb: musb: factor out hcd initalization
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH v3 7/9] rcar-phy: add platform data
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 10/11] usb: musb: use musb->port_mode
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 7/9] rcar-phy: add platform data
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v3 03/11] usb: musb: factor some host-specific functions
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3 05/11] usb: musb: move musb_start to musb_virthub.c
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3 10/11] usb: musb: use musb->port_mode
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3 11/11] usb: musb: eliminate musb_to_hcd
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3 09/11] usb: musb: re-introduce musb->port_mode
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3 06/11] usb: musb: factor out hcd initalization
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3 08/11] usb: musb: add musb_host_setup() and musb_host_cleanup()
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3 07/11] usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modes
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3 04/11] usb: musb: gadget: remove hcd initialization
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3 02/11] usb: musb: move function declarations to musb_{host,gadget}.h
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3 01/11] usb: gadget: drop unused USB_GADGET_MUSB_HDRC
  • From: Daniel Mack <zonque@xxxxxxxxx>
• [PATCH v3 00/11] usb: musb: add back support for host mode
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH 1/2 v4] usbnet: allow status interrupt URB to always be active
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH v3 7/9] rcar-phy: add platform data
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Nishanth Menon <nm@xxxxxx>
• Re: USB-Wishbone bridge adapter
  • From: "Wesley W. Terpstra" <w.terpstra@xxxxxx>
• Re: USB-Wishbone bridge adapter
  • From: "Wesley W. Terpstra" <w.terpstra@xxxxxx>
• Re: [PATCH v3 7/9] rcar-phy: add platform data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: USB-Wishbone bridge adapter
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• USB-Wishbone bridge adapter
  • From: "Wesley W. Terpstra" <w.terpstra@xxxxxx>
• Re: [PATCH 1/2 v4] usbnet: allow status interrupt URB to always be active
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Power state of USB port on computer reboot
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/9] ehci-platform: add pre_setup() method to platform data
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2 v4] sierra_net: keep status interrupt URB active
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 1/2 v4] usbnet: allow status interrupt URB to always be active
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH 2/2 v4] sierra_net: keep status interrupt URB active
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH v3 4/9] rcar-phy: remove EHCI internal buffer setup
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 7/9] rcar-phy: add platform data
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2 v4] usbnet: allow status interrupt URB to always be active
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 1/2 v4] usbnet: allow status interrupt URB to always be active
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH 1/2 v4] usbnet: allow status interrupt URB to always be active
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 1/2 v4] usbnet: allow status interrupt URB to always be active
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 1/2 v4] usbnet: allow status interrupt URB to always be active
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 1/2 v4] usbnet: allow status interrupt URB to always be active
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH 1/2 v4] usbnet: allow status interrupt URB to always be active
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 1/2 v4] usbnet: allow status interrupt URB to always be active
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH 0/4] Add USB support to R8A7778/BOCK-W
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Roger Quadros <rogerq@xxxxxx>
• RE: [PATCH v5 0/3] ARM: Exynos5250: Enabling dwc3-exynos driver
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• RE: [Test Application PATCH 0/2] UVC gadget test application enhancements
  • From: Bhupesh SHARMA <bhupesh.sharma@xxxxxx>
• RE: [PATCH v4 0/2] ARM: Exynos5250: Enabling samsung usb phy
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• Re: [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 1/4] rcar-phy: add R8A7778 support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 9/9] rcar-phy: handle platform data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 7/9] rcar-phy: add platform data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 6/9] rcar-phy: correct base address
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 4/9] rcar-phy: remove EHCI internal buffer setup
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: USB to SPI driver for MCP2210
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 00/11] usb: musb: add back support for host mode
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH v2] staging: dwc2: toggle periodic debugging output separately
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• Re: [PATCH v3 4/9] rcar-phy: remove EHCI internal buffer setup
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] staging: dwc2: toggle periodic debugging output separately
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 00/11] usb: musb: add back support for host mode
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• Re: [PATCH v2 05/11] usb: musb: move musb_start to musb_virthub.c
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH v2 11/11] usb: musb: eliminate musb_to_hcd
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• [PATCH v3] staging: dwc2: toggle periodic debugging output separately
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• Re: [PATCH v2 10/11] usb: musb: use musb->port_mode
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH v2 09/11] usb: musb: re-introduce musb->port_mode
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH v2 08/11] usb: musb: add musb_host_setup() and musb_host_cleanup()
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH v2 07/11] usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modes
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH v2 06/11] usb: musb: factor out hcd initalization
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: victor yeo <victoryeo1974@xxxxxxxxx>
• Re: [PATCH v2 04/11] usb: musb: gadget: remove hcd initialization
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH v2 03/11] usb: musb: factor some host-specific functions
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH v2 02/11] usb: musb: move function declarations to musb_{host,gadget}.h
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH v2 01/11] usb: gadget: drop unused USB_GADGET_MUSB_HDRC
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH 1/2 v4] usbnet: allow status interrupt URB to always be active
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH 2/2 v4] sierra_net: keep status interrupt URB active
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [PATCH v2 00/11] usb: musb: add back support for host mode
  • From: Daniel Mack <zonque@xxxxxxxxx>
• USB2.0 disk format failure in windows guest
  • From: "Gonglei (Arei)" <arei.gonglei@xxxxxxxxxx>
• Re: Power state of USB port on computer reboot
  • From: Blaz Malnersic <blaz.malnersic@xxxxxxxx>
• Re: [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: USB3.0 Interrupt transfer in u-boot
  • From: Puneet Sharma <puneet.sharma@xxxxxxxxxxx>
• Re: [PATCH v2 0/9] Reorganize R8A7779/Marzen USB code
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [Libusbx-devel] libusbx v1.0.15-rc2 is now available for testing
  • From: Pete Batard <pete@xxxxxxx>
• [PATCH 2/2 v4] sierra_net: keep status interrupt URB active
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• [PATCH 1/2 v4] usbnet: allow status interrupt URB to always be active
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• [PATCH 4/4] ARM: shmobile: BOCK-W: enable USB in defconfig
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: shmobile: BOCK-W: add USB support
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/4] ARM: shmobile: R8A7778: add USB support
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/4] rcar-phy: add R8A7778 support
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/4] Add USB support to R8A7778/BOCK-W
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 9/9] rcar-phy: handle platform data
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 8/9] ARM: shmobile: Marzen: pass platform data to USB PHY device
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 7/9] rcar-phy: add platform data
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 6/9] rcar-phy: correct base address
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 5/9] ARM: shmobile: R8A7779: remove USB PHY 2nd memory resource
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 4/9] rcar-phy: remove EHCI internal buffer setup
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 3/9] ARM: shmobile: R8A7779: setup EHCI internal buffer
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/9] ehci-platform: add pre_setup() method to platform data
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 0/9] Reorganize R8A7779/Marzen USB code
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: USB to SPI driver for MCP2210
  • From: Daniel Santos <danielfsantos@xxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Nishanth Menon <nm@xxxxxx>
• USB storage disconnects on xHCI only with Renesas host and ASMedia enclosure
  • From: infernix <infernix@xxxxxxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Nishanth Menon <nm@xxxxxx>
• [RFC PATCH v2 2/4] ARM: OMAP1: nokia770: enable Tahvo
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [RFC PATCH v2 3/4] USB: OMAP: add omap-otg
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [RFC PATCH v2 4/4] USB: OMAP: Tahvo USB transceiver driver
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [RFC PATCH v2 1/4] retu-mfd: support also Tahvo
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• [RFC PATCH v2 0/4] USB: OMAP: Tahvo USB support for 770
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• RE: [PATCH v2] staging: dwc2: toggle periodic debugging output separately
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: USB to SPI driver for MCP2210
  • From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
• Re: USB to SPI driver for MCP2210
  • From: Daniel Santos <danielfsantos@xxxxxxx>
• Re: Power state of USB port on computer reboot
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: USB to SPI driver for MCP2210
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH v2] xhci: fix list access before ini
  • From: Vladimir Murzin <murzin.v@xxxxxxxxx>
• Re: USB to SPI driver for MCP2210
  • From: Daniel Santos <danielfsantos@xxxxxxx>
• Power state of USB port on computer reboot
  • From: Blaz Malnersic <blaz.malnersic@xxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] staging: dwc2: toggle periodic debugging output separately
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• Re: [help] imx27 - isp1504 : unable to init transceiver, probably missing
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: USB3.0 Interrupt transfer in u-boot
  • From: Anatolij Gustschin <agust@xxxxxxx>
• Re: USB to SPI driver for MCP2210
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] staging: dwc2: toggle periodic debugging output separately
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 2/9] ehci-platform: add pre_setup() method to platform data
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: USB3.0 Interrupt transfer in u-boot
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/9] ehci-platform: add pre_setup() method to platform data
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/8] Reorganize R8A7779/Marzen USB code
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH v2] staging: dwc2: toggle periodic debugging output separately
  • From: Matthijs Kooijman <matthijs@xxxxxxxx>
• [PATCH v2] usb: ehci-s5p: fix: Fix null pointer dereferencing
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH] usb: ehci-s5p: fix: Fix null pointer dereferencing
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [PATCH v2 2/9] ehci-platform: add pre_setup() method to platform data
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/9] Reorganize R8A7779/Marzen USB code
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci-s5p: fix: Fix null pointer dereferencing
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/5 v4] USB: Kconfig cleanups
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 2/5 v4] USB: remove USB_EHCI_BIG_ENDIAN_{DESC,MMIO} depends on architecture symbol
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 4/5 v4] USB: enclose all depends on USB_OHCI_HCD within an if USB_OHCI_HCD block
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 5/5 v4] USB: enclose USB_XHCI_HCD related symbols within a if USB_XHCI_HCD block
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 1/5 v4] USB: regroup all depends on USB within an if USB block
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 3/5 v4] USB: enclose EHCI HCD drivers within an if USB_EHCI_HCD block
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH 0/8] Reorganize R8A7779/Marzen USB code
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [Libusbx-devel] libusbx v1.0.15-rc2 is now available for testing
  • From: nico <sl1200mk2@xxxxxxxxx>
• Re: [PATCH] usb: ehci-s5p: fix: Fix null pointer dereferencing
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC][PATCH 1/2] ARM: OMAP4: clock: Add device tree support for AUXCLKs
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: victor yeo <victoryeo1974@xxxxxxxxx>
• [PATCH] USB: option: add a D-Link DWM-156 variant
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH] usb: ehci-s5p: fix: Fix null pointer dereferencing
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [Test Application PATCH 1/2] UVC gadget: Add support for integration with a video-capture device and other fixes
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxx>
• [Test Application PATCH 2/2] UVC gadget: Add a README file describing the UVC gadget test application
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxx>
• [Test Application PATCH 0/2] UVC gadget test application enhancements
  • From: Bhupesh Sharma <bhupesh.sharma@xxxxxx>
• Re: [PATCH 0/6] mfd: omap-usb-host: Device tree support for 3.10
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/6] mfd: omap-usb-host: Device tree support for 3.10
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 2/2] mfd: omap-usb-host: Add device tree support and binding information
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 1/2] mfd: omap-usb-host: Remove PHY reset handling code
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 0/9] Reorganize R8A7779/Marzen USB code
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 0/6] mfd: omap-usb-host: Device tree support for 3.10
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: Crash in dwc3 driver on module unload
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: 答复: Re: 答复: Re: 【PATCH】USB：add new zte 3g-dongle's pid to option.c
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH v2 0/9] Reorganize R8A7779/Marzen USB code
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: USB to SPI driver for MCP2210
  • From: Greg KH <greg@xxxxxxxxx>
• Re: USB3.0 Interrupt transfer in u-boot
  • From: Puneet Sharma <puneet.sharma@xxxxxxxxxxx>
• Crash in dwc3 driver on module unload
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: 答复: Re: 答复: Re: 【PATCH】USB：add new zte 3g-dongle's pid to option.c
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: 答复: Re: 【PATCH】USB：add new zte 3g-dongle's pid to option.c
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: xhci-dbg: Display endpoint number and direction in context dump
  • From: Julius Werner <jwerner@xxxxxxxxxxxx>
• Re: [help] imx27 - isp1504 : unable to init transceiver, probably missing
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [Pull Request] xHCI misc cleanup patches for 3.10
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/9] ehci-platform: add pre_setup() method to platform data
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: fix list access before init
  • From: "Aguirre Rodriguez, Sergio A" <sergio.a.aguirre.rodriguez@xxxxxxxxx>
• Re: Fwd: USB2 isochronous camera not working on USB3 port
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: USB3.0 Interrupt transfer in u-boot
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: fix list access before init
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/9] ehci-platform: add pre_setup() method to platform data
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] xhci - clarify compliance mode debug messages
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 2/3] xhci: Rename SEGMENT_SIZE and SEGMENT_SHIFT as the former is used in a.out.h
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 1/3] xhci: Use ilog2() rather than __ffs() for calculating SEGMENT_SHIFT
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [Pull Request] xHCI misc cleanup patches for 3.10
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/9] ehci-platform: add pre_setup() method to platform data
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/9] ehci-platform: add pre_setup() method to platform data
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/9] ehci-platform: add pre_setup() method to platform data
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 9/9] rcar-phy: handle platform data
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 8/9] ARM: shmobile: Marzen: pass platform data to USB PHY device
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 7/9] rcar-phy: add platform data
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 6/9] rcar-phy: correct base address
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 5/9] ARM: shmobile: R8A7779: remove USB PHY 2nd memory resource
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/9] ehci-platform: add pre_setup() method to platform data
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 4/9] rcar-phy: remove EHCI internal buffer setup
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 3/9] ARM: shmobile: R8A7779: setup EHCI internal buffer
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/9] ehci-platform: add pre_setup() method to platform data
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/9] Reorganize R8A7779/Marzen USB code
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• USB to SPI driver for MCP2210
  • From: Daniel Santos <danielfsantos@xxxxxxx>
• Re: [PATCH net-next] net: cdc_ncm: demote "unexpected notification" to debug level
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] usb: introduce usb force power off mechanism
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] usb: introduce usb force power off mechanism
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 2/4] usb: introduce usb force power off mechanism
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] usb: introduce usb force power off mechanism
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCH net-next] net: cdc_ncm: demote "unexpected notification" to debug level
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 0/5 v3] USB: Kconfig cleanups
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5 v3] USB: Kconfig cleanups
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH 2/4] usb: introduce usb force power off mechanism
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] usb: introduce usb force power off mechanism
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Help with xHCI, uvcvideo driver, and "Unknown event condition, HC probably busted"
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH V5 0/6] USB: EHCI multiplatform for 3.10
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v4 00/21] ARM: OMAP2+: Adapt to ehci-omap changes for 3.10
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V5 0/6] USB: EHCI multiplatform for 3.10
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] usb: introduce usb force power off mechanism
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V5 0/6] USB: EHCI multiplatform for 3.10
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Linux USB file storage gadget with new UDC
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: xHCI ShortPacket Correct Behaviour
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] usb: introduce usb force power off mechanism
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5 v3] USB: Kconfig cleanups
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/4] retu-mfd: support also Tahvo
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] usb: introduce usb force power off mechanism
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] usb: introduce usb force power off mechanism
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Active URB submitted twice in pegasus driver
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] xhci - clarify compliance mode debug messages
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: xhci-dbg: Display endpoint number and direction in context dump
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>