Don't select NOP_USB_XCEIV. Instead, board config must select USB_PHY and the appropriate PHY driver. Also add a hint in Kconfig so that users enabling this driver manually enable the right PHY drivers as well. Gets rid of the below warnings when USB_EHCI_HCD_OMAP is enabled. warning: (USB_EHCI_HCD_OMAP) selects NOP_USB_XCEIV which has unmet direct dependencies (USB_SUPPORT && USB_PHY) warning: (USB_EHCI_HCD_OMAP) selects NOP_USB_XCEIV which has unmet direct dependencies (USB_SUPPORT && USB_PHY) CC: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Roger Quadros <rogerq@xxxxxx> --- drivers/usb/host/Kconfig | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index c0be25c..c558472 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -150,11 +150,13 @@ config USB_EHCI_MXC config USB_EHCI_HCD_OMAP tristate "EHCI support for OMAP3 and later chips" depends on ARCH_OMAP - select NOP_USB_XCEIV default y ---help--- Enables support for the on-chip EHCI controller on OMAP3 and later chips. + If your system uses a PHY on the USB port, you will need to + enable USB_PHY and the appropriate PHY driver as well. Most + boards need the NOP_USB_XCEIV PHY driver. config USB_EHCI_HCD_ORION tristate "Support for Marvell EBU on-chip EHCI USB controller" -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
