Register the USB PHY device from bockw_init(), passing the platform data to it.
Set machine's init_late() method to r8a7778_init_late() in order for [EO]HCI to
get registered too...
The patch has been tested on the BOCK-W board.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
---
arch/arm/mach-shmobile/board-bockw.c | 7 +++++++
1 file changed, 7 insertions(+)
Index: renesas/arch/arm/mach-shmobile/board-bockw.c
===================================================================
--- renesas.orig/arch/arm/mach-shmobile/board-bockw.c
+++ renesas/arch/arm/mach-shmobile/board-bockw.c
@@ -53,6 +53,11 @@ static struct resource smsc911x_resource
DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */
};
+static struct rcar_phy_platform_data usb_phy_platform_data = {
+ .usbpctrl0 = 0,
+ .ferrite_bead = true, /* ??? */
+};
+
#define IRQ0MR 0x30
static void __init bockw_init(void)
{
@@ -61,6 +66,7 @@ static void __init bockw_init(void)
r8a7778_clock_init();
r8a7778_init_irq_extpin(1);
r8a7778_add_standard_devices();
+ r8a7778_add_usb_phy_device(&usb_phy_platform_data);
fpga = ioremap_nocache(0x18200000, SZ_1M);
if (fpga) {
@@ -97,4 +103,5 @@ DT_MACHINE_START(BOCKW_DT, "bockw")
.init_machine = bockw_init,
.init_time = shmobile_timer_init,
.dt_compat = bockw_boards_compat_dt,
+ .init_late = r8a7778_init_late,
MACHINE_END
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
