Linux Remote Processor
[Prev Page][Next Page]
- Re: [PATCH] remoteproc: k3-r5: Delay notification of wakeup event
- Re: [PATCH v11 3/9] remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
- Re: [PATCH v11 3/9] remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
- From: Krzysztof Kozlowski
- Re: [PATCH v11 3/9] remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
- [PATCH] remoteproc: k3-r5: Fix error handling when power-up failed
- Re: [PATCH v11 2/9] remoteproc: k3: Factor out TI-SCI processor control OF get function
- Re: [PATCH v11 0/9] TI K3 M4F support on AM62 and AM64 SoCs
- Re: [PATCH v11 4/9] arm64: dts: ti: k3-am62: Add M4F remoteproc node
- Re: [PATCH v11 3/9] remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
- Re: [PATCH v11 3/9] remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
- From: Vignesh Raghavendra
- [PATCH] remoteproc: qcom_q6v5_mss: Re-order writes to the IMEM region
- [PATCH v3] remoteproc: xlnx: add sram support
- Re: [PATCH v4 2/3] remoteproc: k3-r5: Acquire mailbox handle during probe routine
- Re: [PATCH v11 3/9] remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
- Re: (subset) [PATCH v4 0/6] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP
- From: Srinivas Kandagatla
- Re: [PATCH v4 2/3] remoteproc: k3-r5: Acquire mailbox handle during probe routine
- From: Beleswar Prasad Padhi
- Re: (subset) [PATCH v4 0/5] Add MPSS remoteproc support for SDX75
- Re: (subset) [PATCH v2 0/5] soc: qcom: fix rpm_requests module probing
- Re: (subset) [PATCH v4 0/6] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP
- Re: (subset) [PATCH v4 0/5] Add MPSS remoteproc support for SDX75
- Re: (subset) [PATCH v4 0/6] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP
- Re: [PATCH v11 3/9] remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
- RE: [PATCH v2 2/2] remoteproc: imx_rproc: handle system off for i.MX7ULP
- Re: [PATCH v4 3/3] remoteproc: k3-dsp: Acquire mailbox handle during probe routine
- Re: [PATCH v4 2/3] remoteproc: k3-r5: Acquire mailbox handle during probe routine
- Re: [PATCH v2 2/2] remoteproc: imx_rproc: handle system off for i.MX7ULP
- Re: [PATCH 6/6] remoteproc: imx_rproc: handle system off for i.MX7ULP
- Re: [PATCH 3/7] remoteproc: keystone: Use devm action to release reserved memory
- Re: [PATCH] dt-bindings: remoteproc: xlnx,zynqmp-r5fss: add missing "additionalProperties" on child nodes
- Re: [PATCH] remoteproc: Use of_property_present()
- Re: [PATCH v3] dt-bindings: hwlock: sprd-hwspinlock: convert to YAML
- Re: [PATCH 0/3] rpmsg: glink: Introduce tracepoints
- Re: [PATCH] dt-bindings: remoteproc: xlnx,zynqmp-r5fss: add missing "additionalProperties" on child nodes
- Re: [PATCH] dt-bindings: remoteproc: xlnx,zynqmp-r5fss: add missing "additionalProperties" on child nodes
- [PATCH 1/1] remoteproc: Use iommu_paging_domain_alloc()
- Re: [PATCH] rpmsg: char: Export alias for RPMSG ID rpmsg-raw from table
- [PATCH] dt-bindings: remoteproc: xlnx,zynqmp-r5fss: add missing "additionalProperties" on child nodes
- From: Krzysztof Kozlowski
- [PATCH] remoteproc: k3-r5: Delay notification of wakeup event
- Re: [PATCH][next] rpmsg: glink: Avoid -Wflex-array-member-not-at-end warnings
- Re: [PATCH v4 1/3] remoteproc: k3-r5: Use devm_rproc_alloc() helper
- Re: [PATCH] rpmsg: char: Export alias for RPMSG ID rpmsg-raw from table
- Re: [PATCH 1/7] remoteproc: keystone: Use devm_kasprintf() to build name string
- [PATCH v4 3/3] remoteproc: k3-dsp: Acquire mailbox handle during probe routine
- [PATCH v4 2/3] remoteproc: k3-r5: Acquire mailbox handle during probe routine
- [PATCH v4 1/3] remoteproc: k3-r5: Use devm_rproc_alloc() helper
- [PATCH v4 0/3] Defer TI's Remoteproc's Probe until Mailbox is Probed
- Re: [PATCH v3 3/3] remoteproc: k3-dsp: Acquire mailbox handle during probe routine
- From: Beleswar Prasad Padhi
- Re: [PATCH v3 1/3] remoteproc: k3-r5: Use devm_rproc_alloc() helper
- From: Beleswar Prasad Padhi
- RE: [PATCH 6/6] remoteproc: imx_rproc: handle system off for i.MX7ULP
- Re: [PATCH -next] hwspinlock: stm32: Add missing clk_disable_unprepare in stm32_hwspinlock_probe
- Re: [PATCH 3/3] rpmsg: glink: Introduce packet tracepoints
- Re: [PATCH 2/3] rpmsg: glink: Pass channel to qcom_glink_send_close_ack()
- Re: [PATCH 1/3] rpmsg: glink: Tidy up RX advance handling
- Re: [PATCH][next] rpmsg: glink: Avoid -Wflex-array-member-not-at-end warnings
- From: Gustavo A. R. Silva
- [PATCH][next] rpmsg: glink: Avoid -Wflex-array-member-not-at-end warnings
- From: Gustavo A. R. Silva
- Re: [PATCH v3 3/3] remoteproc: k3-dsp: Acquire mailbox handle during probe routine
- Re: [PATCH v3 1/3] remoteproc: k3-r5: Use devm_rproc_alloc() helper
- [PATCH v3 3/3] remoteproc: k3-dsp: Acquire mailbox handle during probe routine
- [PATCH v3 2/3] remoteproc: k3-r5: Acquire mailbox handle during probe routine
- [PATCH v3 1/3] remoteproc: k3-r5: Use devm_rproc_alloc() helper
- [PATCH v3 0/3] Defer TI's Remoteproc's Probe until Mailbox is Probed
- Re: [PATCH v4 1/6] dt-bindings: misc: qcom,fastrpc: increase the max number of iommus
- From: Krzysztof Kozlowski
- [PATCH 3/3] rpmsg: glink: Introduce packet tracepoints
- [PATCH 1/3] rpmsg: glink: Tidy up RX advance handling
- [PATCH 2/3] rpmsg: glink: Pass channel to qcom_glink_send_close_ack()
- [PATCH 0/3] rpmsg: glink: Introduce tracepoints
- Re: [PATCH 6/6] remoteproc: imx_rproc: handle system off for i.MX7ULP
- [PATCH v4 6/6] arm64: dts: qcom: sa8775p-ride: enable remoteprocs
- From: Bartosz Golaszewski
- [PATCH v4 5/6] arm64: dts: qcom: sa8775p: add ADSP, CDSP and GPDSP nodes
- From: Bartosz Golaszewski
- [PATCH v4 4/6] misc: fastrpc: Add support for cdsp1 remoteproc
- From: Bartosz Golaszewski
- [PATCH v4 3/6] remoteproc: qcom_q6v5_pas: Add support for SA8775p ADSP, CDSP and GPDSP
- From: Bartosz Golaszewski
- [PATCH v4 2/6] dt-bindings: mailbox: qcom-ipcc: Add GPDSP0 and GPDSP1 clients
- From: Bartosz Golaszewski
- [PATCH v4 0/6] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP
- From: Bartosz Golaszewski
- [PATCH v4 1/6] dt-bindings: misc: qcom,fastrpc: increase the max number of iommus
- From: Bartosz Golaszewski
- [PATCH v3] dt-bindings: hwlock: sprd-hwspinlock: convert to YAML
- [PATCH -next] hwspinlock: stm32: Add missing clk_disable_unprepare in stm32_hwspinlock_probe
- [PATCH 4/7] remoteproc: keystone: Use devm_pm_runtime_enable() helper
- [PATCH 2/7] remoteproc: keystone: Use devm_rproc_alloc() helper
- [PATCH 3/7] remoteproc: keystone: Use devm action to release reserved memory
- [PATCH 6/7] remoteproc: keystone: Use devm_gpiod_get() helper
- [PATCH 7/7] remoteproc: keystone: Use devm_rproc_add() helper
- [PATCH 1/7] remoteproc: keystone: Use devm_kasprintf() to build name string
- [PATCH 5/7] remoteproc: keystone: Use devm action to call PM runtime put sync
- [PATCH v11 8/9] arm64: dts: ti: k3-am642-evm: Add M4F remoteproc node
- [PATCH v11 9/9] arm64: defconfig: Enable TI K3 M4 remoteproc driver
- [PATCH v11 6/9] arm64: dts: ti: k3-am64: Add M4F remoteproc node
- [PATCH v11 5/9] arm64: dts: ti: k3-am625-sk: Add M4F remoteproc node
- [PATCH v11 3/9] remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
- [PATCH v11 1/9] dt-bindings: remoteproc: k3-m4f: Add K3 AM64x SoCs
- [PATCH v11 7/9] arm64: dts: ti: k3-am642-sk: Add M4F remoteproc node
- [PATCH v11 0/9] TI K3 M4F support on AM62 and AM64 SoCs
- [PATCH v11 2/9] remoteproc: k3: Factor out TI-SCI processor control OF get function
- [PATCH v11 4/9] arm64: dts: ti: k3-am62: Add M4F remoteproc node
- RE: [PATCH v2 2/2] remoteproc: imx_rproc: handle system off for i.MX7ULP
- Re: [PATCH v2 2/2] remoteproc: imx_rproc: handle system off for i.MX7ULP
- Re: (subset) [PATCH 0/3] Update Konrad Dybcio's email addresses
- RE: [PATCH] remoteproc: Use of_property_present()
- [PATCH AUTOSEL 5.10 20/38] hwspinlock: Introduce hwspin_lock_bust()
- [PATCH AUTOSEL 5.15 26/47] hwspinlock: Introduce hwspin_lock_bust()
- [PATCH AUTOSEL 6.1 31/61] hwspinlock: Introduce hwspin_lock_bust()
- [PATCH AUTOSEL 6.6 40/83] hwspinlock: Introduce hwspin_lock_bust()
- [PATCH AUTOSEL 6.10 061/121] remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
- [PATCH AUTOSEL 6.10 059/121] hwspinlock: Introduce hwspin_lock_bust()
- [PATCH AUTOSEL 6.10 057/121] remoteproc: mediatek: Zero out only remaining bytes of IPI buffer
- Re: [PATCH v2 2/5] dt-bindings: soc: qcom: smd-rpm: add generic compatibles
- Using RPMSG to communicate between host and guest drivers
- [PATCH] remoteproc: Use of_property_present()
- Re: [PATCH v2 1/2] dt-bindings: remoteproc: Support multiple reserved memory regions
- From: Krzysztof Kozlowski
- Re: [PATCH v2 1/2] dt-bindings: remoteproc: Support multiple reserved memory regions
- From: Krzysztof Kozlowski
- Re: [PATCH v2 1/2] dt-bindings: remoteproc: Support multiple reserved memory regions
- Re: [PATCH v2 1/2] dt-bindings: remoteproc: Support multiple reserved memory regions
- From: Krzysztof Kozlowski
- [PATCH v2 2/2] remoteproc: mediatek: Support multiple reserved memory regions
- [PATCH v2 1/2] dt-bindings: remoteproc: Support multiple reserved memory regions
- [PATCH v2 0/2] Support multiple reserved memory regions
- Re: [PATCH v2 2/5] dt-bindings: soc: qcom: smd-rpm: add generic compatibles
- Re: [PATCH v2 4/5] ARM: dts: qcom: add generic compat string to RPM glink channels
- Re: [PATCH v2 5/5] arm64: dts: qcom: add generic compat string to RPM glink channels
- RE: [PATCH v2 2/2] remoteproc: imx_rproc: handle system off for i.MX7ULP
- [PATCH v2 5/5] arm64: dts: qcom: add generic compat string to RPM glink channels
- [PATCH v2 4/5] ARM: dts: qcom: add generic compat string to RPM glink channels
- [PATCH v2 3/5] soc: qcom: smd-rpm: add qcom,smd-rpm compatible
- [PATCH v2 2/5] dt-bindings: soc: qcom: smd-rpm: add generic compatibles
- [PATCH v2 1/5] Revert "soc: qcom: smd-rpm: Match rpmsg channel instead of compatible"
- [PATCH v2 0/5] soc: qcom: fix rpm_requests module probing
- [PATCH] rpmsg: char: Export alias for RPMSG ID rpmsg-raw from table
- Re: [PATCH v2 2/2] remoteproc: imx_rproc: handle system off for i.MX7ULP
- Re: [PATCH 3/3] dt-bindings: Batch-update Konrad Dybcio's email
- Re: [PATCH v2 0/4] remoteproc: imx_rproc: various patches for misc
- Re: [PATCH v4 0/2] Use of devname for interrupt descriptions and tracepoint support for smp2p
- Re: [PATCH 2/3] MAINTAINERS: Update Konrad Dybcio's email address
- Re: [PATCH 1/3] mailmap: Add an entry for Konrad Dybcio
- Re: [PATCH 3/3] dt-bindings: Batch-update Konrad Dybcio's email
- From: Krzysztof Kozlowski
- Re: [PATCH 0/3] Update Konrad Dybcio's email addresses
- [PATCH 3/3] dt-bindings: Batch-update Konrad Dybcio's email
- [PATCH 2/3] MAINTAINERS: Update Konrad Dybcio's email address
- [PATCH 1/3] mailmap: Add an entry for Konrad Dybcio
- [PATCH 0/3] Update Konrad Dybcio's email addresses
- Re: [PATCH v2] remoteproc: xlnx: add sram support
- Re: [PATCH v2] remoteproc: xlnx: add sram support
- Re: [GIT PULL] rpmsg updates for v6.11
- Re: [GIT PULL] remoteproc updates for v6.11
- Re: [GIT PULL] hwspinlock updates for v6.11
- [GIT PULL] rpmsg updates for v6.11
- Re: [PATCH] rpmsg: char: add missing MODULE_DESCRIPTION() macro
- [GIT PULL] remoteproc updates for v6.11
- [GIT PULL] hwspinlock updates for v6.11
- Re: [PATCH v2] remoteproc: xlnx: add sram support
- Re: [PATCH v2 0/4] remoteproc: imx_rproc: various patches for misc
- Re: [PATCH v2 0/2] remoteproc: imx_rproc: support non-blocking tx for i.MX7ULP
- [PATCH v2 2/2] remoteproc: imx_rproc: handle system off for i.MX7ULP
- [PATCH v2 1/2] remoteproc: imx_rproc: allow tx_block to be set
- [PATCH v2 0/2] remoteproc: imx_rproc: support non-blocking tx for i.MX7ULP
- [PATCH v2 4/4] remoteproc: imx_rproc: merge TCML/U
- [PATCH v2 3/4] remoteproc: imx_rproc: initialize workqueue earlier
- [PATCH v2 2/4] remoteproc: imx_rproc: use imx specific hook for find_loaded_rsc_table
- [PATCH v2 1/4] remoteproc: imx_rproc: correct ddr alias for i.MX8M
- [PATCH v2 0/4] remoteproc: imx_rproc: various patches for misc
- Re: [PATCH 4/6] remoteproc: imx_rproc: merge TCML/U
- Re: [PATCH 2/6] remoteproc: imx_rproc: use imx specific hook for find_loaded_rsc_table
- RE: [PATCH 5/6] remoteproc: imx_rproc: allow tx_block to be set
- RE: [PATCH 4/6] remoteproc: imx_rproc: merge TCML/U
- RE: [PATCH 3/6] remoteproc: imx_rproc: initialize workqueue earlier
- RE: [PATCH 1/6] remoteproc: imx_rproc: correct ddr alias for i.MX8M
- [PATCH v4 2/2] soc: qcom: smp2p: Introduce tracepoint support
- [PATCH v4 0/2] Use of devname for interrupt descriptions and tracepoint support for smp2p
- [PATCH v4 1/2] soc: qcom: smp2p: Use devname for interrupt descriptions
- Re: [PATCH 1/6] remoteproc: imx_rproc: correct ddr alias for i.MX8M
- Re: [PATCH 6/6] remoteproc: imx_rproc: handle system off for i.MX7ULP
- Re: [PATCH 5/6] remoteproc: imx_rproc: allow tx_block to be set
- Re: [PATCH 4/6] remoteproc: imx_rproc: merge TCML/U
- Re: [PATCH 3/6] remoteproc: imx_rproc: initialize workqueue earlier
- Re: [PATCH 1/6] remoteproc: imx_rproc: correct ddr alias for i.MX8M
- Re: [PATCH v2 2/2] virtio: fix vq # for balloon
- [PATCH v2] remoteproc: xlnx: add sram support
- [PATCH] remoteproc: xlnx: add sram support
- Re: [PATCH v4 2/5] remoteproc: qcom: pas: Add SDX75 remoteproc support
- [PATCH 6/6] remoteproc: imx_rproc: handle system off for i.MX7ULP
- [PATCH 5/6] remoteproc: imx_rproc: allow tx_block to be set
- [PATCH 4/6] remoteproc: imx_rproc: merge TCML/U
- [PATCH 3/6] remoteproc: imx_rproc: initialize workqueue earlier
- [PATCH 2/6] remoteproc: imx_rproc: use imx specific hook for find_loaded_rsc_table
- [PATCH 1/6] remoteproc: imx_rproc: correct ddr alias for i.MX8M
- [PATCH 0/6] remoteproc: imx_rproc: various patches for misc
- Re: [PATCH 1/1] remoteproc: mediatek: Support multiple reserved memory regions
- From: AngeloGioacchino Del Regno
- Re: [PATCH RFC 1/1] remoteproc: mediatek: Support reserved CMA regions
- Re: [PATCH v2 2/2] virtio: fix vq # for balloon
- Re: [PATCH v2 2/2] virtio: fix vq # for balloon
- Re: [PATCH v2 2/2] virtio: fix vq # for balloon
- Re: [PATCH v2 2/2] virtio: fix vq # for balloon
- Re: [PATCH v2 2/2] virtio: fix vq # for balloon
- Re: [PATCH v2 2/2] virtio: fix vq # for balloon
- [no subject]
- Re: [PATCH v2 2/2] virtio: fix vq # for balloon
- Re: [PATCH v2 2/2] virtio: fix vq # for balloon
- Re: [PATCH 1/1] remoteproc: mediatek: Support multiple reserved memory regions
- Re: [PATCH 0/1] Support multiple reserved memory regions
- Re: [PATCH v2 2/2] virtio: fix vq # for balloon
- [PATCH v2 2/2] virtio: fix vq # for balloon
- [PATCH RFC 1/1] remoteproc: mediatek: Support reserved CMA regions
- [PATCH RFC 0/1] Support CMA regions
- Re: [PATCH 2/2] virtio: fix vq # when vq skipped
- Re: [PATCH 2/2] virtio: fix vq # when vq skipped
- Re: [PATCH v4 3/5] arm64: dts: qcom: sdx75: update reserved memory regions for mpss
- Re: [PATCH v8 2/5] remoteproc: Add TEE support
- [PATCH v4 3/5] arm64: dts: qcom: sdx75: update reserved memory regions for mpss
- [PATCH v4 5/5] arm64: dts: qcom: sdx75-idp: enable MPSS remoteproc node
- [PATCH v4 4/5] arm64: dts: qcom: sdx75: Add remoteproc node
- [PATCH v4 2/5] remoteproc: qcom: pas: Add SDX75 remoteproc support
- [PATCH v4 1/5] dt-bindings: remoteproc: qcom,sm8550-pas: document the SDX75 PAS
- [PATCH v4 0/5] Add MPSS remoteproc support for SDX75
- Re: [PATCH] remoteproc: mediatek: Increase MT8188/MT8195 SCP core0 DRAM size
- Re: [PATCH v8 2/5] remoteproc: Add TEE support
- RE: [PATCH] remoteproc: rcar: Fix PM imbalance if RPM_ACTIVE
- Re: [PATCH] remoteproc: rcar: Fix PM imbalance if RPM_ACTIVE
- [PATCH] remoteproc: rcar: Fix PM imbalance if RPM_ACTIVE
- Re: [PATCH 0/4] remoteproc: k3-r5: Introduce suspend to ram support
- Re: [PATCH] remoteproc: Remove unneeded check in elf_strtbl_add()
- [PATCH] remoteproc: Remove unneeded check in elf_strtbl_add()
- [PATCH 2/2] virtio: fix vq # when vq skipped
- Re: [PATCH v8 2/5] remoteproc: Add TEE support
- Re: [PATCH v6] remoteproc: xlnx: add attach detach support
- Re: [PATCH v2] remoteproc: k3-dsp: Fix log levels where appropriate
- Re: [PATCH v8 2/5] remoteproc: Add TEE support
- Re: [PATCH v2] dt-bindings: hwlock: sprd-hwspinlock: convert to YAML
- [PATCH v2] dt-bindings: hwlock: sprd-hwspinlock: convert to YAML
- Re: [PATCH v8 2/5] remoteproc: Add TEE support
- Re: [PATCH v2] remoteproc: k3-dsp: Fix log levels where appropriate
- Re: [PATCH v8 2/5] remoteproc: Add TEE support
- Re: [PATCH v8 2/5] remoteproc: Add TEE support
- Re: [PATCH] dt-bindings: hwlock: sprd-hwspinlock: convert to YAML
- [PATCH] dt-bindings: hwlock: sprd-hwspinlock: convert to YAML
- [PATCH 1/1] remoteproc: mediatek: Support multiple reserved memory regions
- [PATCH 0/1] Support multiple reserved memory regions
- Re: [PATCH] remoteproc: mediatek: Increase MT8188/MT8195 SCP core0 DRAM size
- From: AngeloGioacchino Del Regno
- Re: [PATCH v8 2/5] remoteproc: Add TEE support
- [PATCH] remoteproc: mediatek: Increase MT8188/MT8195 SCP core0 DRAM size
- Re: (subset) [PATCH V3 0/2] Use of devname for interrupt descriptions and tracepoint support for smp2p
- Re: (subset) [PATCH 0/2] qcom: fix missing dependencies for the QCOM_PD_MAPPER
- Re: [PATCH v8 5/5] remoteproc: stm32: Add support of an OP-TEE TA to load the firmware
- Re: [PATCH v8 2/5] remoteproc: Add TEE support
- Re: [PATCH V3 2/2] soc: qcom: smp2p: Introduce tracepoint support
- Re: [PATCH V3 1/2] soc: qcom: smp2p: Use devname for interrupt descriptions
- Re: [PATCH V3 1/2] soc: qcom: smp2p: Use devname for interrupt descriptions
- Re: [PATCH 4/4] remoteproc: k3-r5: support for graceful stop of remote cores
- Re: [PATCH 2/4] remoteproc: k3-r5: Introduce PM suspend/resume handlers
- Re: [PATCH 3/4] remoteproc: k3-r5: k3_r5_rproc_stop: code reorder
- Re: [PATCH 4/4] remoteproc: k3-r5: support for graceful stop of remote cores
- Re: [PATCH 1/4] remoteproc: k3-r5: Fix IPC-only mode detection
- Re: [PATCH 4/4] remoteproc: k3-r5: support for graceful stop of remote cores
- Re: [PATCH 3/4] remoteproc: k3-r5: k3_r5_rproc_stop: code reorder
- Re: [PATCH 0/4] remoteproc: k3-r5: Introduce suspend to ram support
- Re: [PATCH 1/4] remoteproc: k3-r5: Fix IPC-only mode detection
- Re: [PATCH v3 3/5] arm64: dts: qcom: sdx75: update reserved memory regions for mpss
- Re: [PATCH 3/4] remoteproc: k3-r5: k3_r5_rproc_stop: code reorder
- Re: [PATCH 2/4] remoteproc: k3-r5: Introduce PM suspend/resume handlers
- Re: [PATCH V3 1/2] soc: qcom: smp2p: Use devname for interrupt descriptions
- Re: [PATCH 4/4] remoteproc: k3-r5: support for graceful stop of remote cores
- Re: [PATCH 0/4] remoteproc: k3-r5: Introduce suspend to ram support
- Re: [PATCH 4/4] remoteproc: k3-r5: support for graceful stop of remote cores
- Re: [PATCH 3/4] remoteproc: k3-r5: k3_r5_rproc_stop: code reorder
- Re: [PATCH v9 8/8] arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC
- Re: [PATCH 2/4] remoteproc: k3-r5: Introduce PM suspend/resume handlers
- Re: [PATCH 1/4] remoteproc: k3-r5: Fix IPC-only mode detection
- Re: [PATCH 1/4] remoteproc: k3-r5: Fix IPC-only mode detection
- Re: [PATCH] remoteproc: mediatek: Don't attempt to remap l1tcm memory if missing
- Re: [PATCH V3 2/2] soc: qcom: smp2p: Introduce tracepoint support
- Re: [PATCH] remoteproc: mediatek: Don't attempt to remap l1tcm memory if missing
- From: AngeloGioacchino Del Regno
- Re: [PATCH V3 2/2] soc: qcom: smp2p: Introduce tracepoint support
- Re: [PATCH] remoteproc: mediatek: Don't attempt to remap l1tcm memory if missing
- Re: [PATCH v9 8/8] arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC
- [PATCH] remoteproc: mediatek: Don't attempt to remap l1tcm memory if missing
- From: Nícolas F. R. A. Prado
- [PATCH v6] remoteproc: xlnx: add attach detach support
- Re: [PATCH v9 1/8] remoteproc: qcom: Add PRNG proxy clock
- Re: [PATCH v9 8/8] arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC
- Re: [PATCH v9 1/8] remoteproc: qcom: Add PRNG proxy clock
- Re: [PATCH v9 3/8] remoteproc: qcom: Add support for split q6 + m3 wlan firmware
- Re: [PATCH v9 1/8] remoteproc: qcom: Add PRNG proxy clock
- [PATCH V3 2/2] soc: qcom: smp2p: Introduce tracepoint support
- [PATCH V3 1/2] soc: qcom: smp2p: Use devname for interrupt descriptions
- [PATCH V3 0/2] Use of devname for interrupt descriptions and tracepoint support for smp2p
- Re: [PATCH v9 1/8] remoteproc: qcom: Add PRNG proxy clock
- Re: [PATCH] remoteproc: mediatek: Increase MT8188 SCP core0 DRAM size
- From: Jason-ch Chen (陳建豪)
- Re: [PATCH 2/2] remoteproc: qcom: select AUXILIARY_BUS
- Re: [PATCH 1/2] soc: qcom: add missing pd-mapper dependencies
- Re: [PATCH v9 1/8] remoteproc: qcom: Add PRNG proxy clock
- [PATCH v2] remoteproc: k3-dsp: Fix log levels where appropriate
- [PATCH 2/2] remoteproc: qcom: select AUXILIARY_BUS
- [PATCH 1/2] soc: qcom: add missing pd-mapper dependencies
- [PATCH 0/2] qcom: fix missing dependencies for the QCOM_PD_MAPPER
- Re: [PATCH 2/2] remoteproc: k3-r5: Fix log levels where appropriate
- [PATCH 1/2] remoteproc: k3-dsp: Fix log levels where appropriate
- [PATCH 2/2] remoteproc: k3-r5: Fix log levels where appropriate
- Re: [PATCH v3 3/5] arm64: dts: qcom: sdx75: update reserved memory regions for mpss
- Re: [PATCH v2 00/13] OMAP mailbox FIFO removal
- Re: [PATCH v2 00/13] OMAP mailbox FIFO removal
- Re: [PATCH v3 3/4] remoteproc: qcom_q6v5_pas: Add support to attach a DSP
- Re: (subset) [PATCH v9 0/5] soc: qcom: add in-kernel pd-mapper implementation
- Re: [PATCH v9 4/8] remoteproc: qcom: Add ssr subdevice identifier
- Re: [PATCH v9 4/8] remoteproc: qcom: Add ssr subdevice identifier
- From: Krzysztof Kozlowski
- Re: [PATCH v9 2/8] remoteproc: qcom: Add secure PIL support
- Re: [PATCH v9 1/8] remoteproc: qcom: Add PRNG proxy clock
- Re: [PATCH v9 1/8] remoteproc: qcom: Add PRNG proxy clock
- Re: (subset) [PATCH v9 0/5] soc: qcom: add in-kernel pd-mapper implementation
- Re: [PATCH v9 1/5] soc: qcom: pdr: protect locator_addr with the main mutex
- Re: [PATCH v3 3/5] arm64: dts: qcom: sdx75: update reserved memory regions for mpss
- Re: [PATCH vhost v9 2/6] virtio: remove support for names array entries being null.
- RE: [PATCH vhost v9 2/6] virtio: remove support for names array entries being null.
- [PATCH v9 5/5] remoteproc: qcom: enable in-kernel PD mapper
- [PATCH v9 4/5] soc: qcom: add pd-mapper implementation
- [PATCH v9 3/5] soc: qcom: pdr: extract PDR message marshalling data
- [PATCH v9 2/5] soc: qcom: pdr: fix parsing of domains lists
- [PATCH v9 1/5] soc: qcom: pdr: protect locator_addr with the main mutex
- [PATCH v9 0/5] soc: qcom: add in-kernel pd-mapper implementation
- Re: [PATCH v9 7/8] clk: qcom: Add WCSSAON reset
- Re: [PATCH v9 0/8] remoteproc: qcom: q6v5-wcss: Add support for secure pil
- Re: [PATCH v9 4/8] remoteproc: qcom: Add ssr subdevice identifier
- Re: [PATCH v9 0/8] remoteproc: qcom: q6v5-wcss: Add support for secure pil
- Re: [PATCH v9 2/8] remoteproc: qcom: Add secure PIL support
- Re: [PATCH v9 1/8] remoteproc: qcom: Add PRNG proxy clock
- Re: [PATCH v9 6/8] dt-bindings: clock: qcom: Add reset for WCSSAON
- From: Kathiravan Thirumoorthy
- Re: [PATCH v9 7/8] clk: qcom: Add WCSSAON reset
- From: Kathiravan Thirumoorthy
- Re: [PATCH v9 8/8] arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC
- From: Kathiravan Thirumoorthy
- Re: [PATCH v9 6/8] dt-bindings: clock: qcom: Add reset for WCSSAON
- From: Krzysztof Kozlowski
- Re: [PATCH v9 8/8] arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC
- From: Krzysztof Kozlowski
- Re: [PATCH v9 5/8] remoteproc: qcom: Update regmap offsets for halt register
- From: Krzysztof Kozlowski
- Re: [PATCH v9 4/8] remoteproc: qcom: Add ssr subdevice identifier
- From: Krzysztof Kozlowski
- Re: [PATCH v9 1/8] remoteproc: qcom: Add PRNG proxy clock
- From: Krzysztof Kozlowski
- [PATCH 2/4] remoteproc: k3-r5: Introduce PM suspend/resume handlers
- [PATCH 1/4] remoteproc: k3-r5: Fix IPC-only mode detection
- [PATCH 4/4] remoteproc: k3-r5: support for graceful stop of remote cores
- [PATCH 3/4] remoteproc: k3-r5: k3_r5_rproc_stop: code reorder
- [PATCH 0/4] remoteproc: k3-r5: Introduce suspend to ram support
- [PATCH v8 0/5] Introduction of a remoteproc tee to load signed firmware
- [PATCH v8 4/5] remoteproc: stm32: Create sub-functions to request shutdown and release
- [PATCH v8 3/5] dt-bindings: remoteproc: Add compatibility for TEE support
- [PATCH v8 2/5] remoteproc: Add TEE support
- [PATCH v8 5/5] remoteproc: stm32: Add support of an OP-TEE TA to load the firmware
- [PATCH v8 1/5] remoteproc: core: Introduce rproc_pa_to_va helper
- Re: [PATCH v2 2/3] remoteproc: k3-r5: Acquire mailbox handle during probe
- [PATCH v9 8/8] arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC
- From: Gokul Sriram Palanisamy
- [PATCH v9 7/8] clk: qcom: Add WCSSAON reset
- From: Gokul Sriram Palanisamy
- [PATCH v9 6/8] dt-bindings: clock: qcom: Add reset for WCSSAON
- From: Gokul Sriram Palanisamy
- [PATCH v9 5/8] remoteproc: qcom: Update regmap offsets for halt register
- From: Gokul Sriram Palanisamy
- [PATCH v9 4/8] remoteproc: qcom: Add ssr subdevice identifier
- From: Gokul Sriram Palanisamy
- [PATCH v9 2/8] remoteproc: qcom: Add secure PIL support
- From: Gokul Sriram Palanisamy
- [PATCH v9 1/8] remoteproc: qcom: Add PRNG proxy clock
- From: Gokul Sriram Palanisamy
- [PATCH v9 3/8] remoteproc: qcom: Add support for split q6 + m3 wlan firmware
- From: Gokul Sriram Palanisamy
- [PATCH v9 0/8] remoteproc: qcom: q6v5-wcss: Add support for secure pil
- From: Gokul Sriram Palanisamy
- Re: [PATCH v2 2/3] remoteproc: k3-r5: Acquire mailbox handle during probe
- From: Beleswar Prasad Padhi
- Re: [PATCH v3 3/4] remoteproc: qcom_q6v5_pas: Add support to attach a DSP
- Re: [PATCH v3 2/4] remoteproc: qcom: q6v5: Add support for q6 rmb registers
- Re: [PATCH v7 1/5] remoteproc: core: Introduce rproc_pa_to_va helper
- Re: [PATCH v7 2/5] remoteproc: Add TEE support
- Re: [PATCH v7 2/5] remoteproc: Add TEE support
- Re: [PATCH vhost v9 2/6] virtio: remove support for names array entries being null.
- Re: [PATCH v3 1/4] dt-bindings: remoteproc: mpss: Document QDU1000/QRU1000 mpss devices
- Re: [PATCH v3 1/4] dt-bindings: remoteproc: mpss: Document QDU1000/QRU1000 mpss devices
- From: Krzysztof Kozlowski
- [PATCH v3 4/4] remoteproc: qcom_q6v5_pas: Add QDU1000/QRU1000 mpss compatible
- [PATCH v3 3/4] remoteproc: qcom_q6v5_pas: Add support to attach a DSP
- [PATCH v3 2/4] remoteproc: qcom: q6v5: Add support for q6 rmb registers
- [PATCH v3 1/4] dt-bindings: remoteproc: mpss: Document QDU1000/QRU1000 mpss devices
- [PATCH v3 0/4]remoteproc: qcom_q6v5_pas: Add support for QDU1000/QRU1000 mpss
- Re: [PATCH vhost v9 3/6] virtio: find_vqs: pass struct instead of multi parameters
- Re: [PATCH vhost v9 3/6] virtio: find_vqs: pass struct instead of multi parameters
- Re: [PATCH vhost v9 3/6] virtio: find_vqs: pass struct instead of multi parameters
- Re: [PATCH vhost v9 2/6] virtio: remove support for names array entries being null.
- Re: [PATCH vhost v9 2/6] virtio: remove support for names array entries being null.
- Re: [PATCH vhost v9 2/6] virtio: remove support for names array entries being null.
- Re: [PATCH vhost v9 3/6] virtio: find_vqs: pass struct instead of multi parameters
- Re: [PATCH vhost v9 3/6] virtio: find_vqs: pass struct instead of multi parameters
- Re: [PATCH vhost v9 2/6] virtio: remove support for names array entries being null.
- Re: [PATCH vhost v9 3/6] virtio: find_vqs: pass struct instead of multi parameters
- Re: [PATCH vhost v9 3/6] virtio: find_vqs: pass struct instead of multi parameters
- Re: [PATCH vhost v9 2/6] virtio: remove support for names array entries being null.
- Re: [PATCH vhost v9 3/6] virtio: find_vqs: pass struct instead of multi parameters
- Re: [PATCH vhost v9 2/6] virtio: remove support for names array entries being null.
- Re: [PATCH vhost v9 2/6] virtio: remove support for names array entries being null.
- Re: [PATCH vhost v9 1/6] virtio_balloon: remove the dependence where names[] is null
- Re: [PATCH vhost v9 1/6] virtio_balloon: remove the dependence where names[] is null
- Re: [PATCH vhost v9 2/6] virtio: remove support for names array entries being null.
- Re: [PATCH vhost v9 3/6] virtio: find_vqs: pass struct instead of multi parameters
- Re: [PATCH v7 2/5] remoteproc: Add TEE support
- Re: [PATCH v7 2/5] remoteproc: Add TEE support
- Re: [PATCH V1] rpmsg: glink: Make glink smem interrupt wakeup capable
- Re: [PATCH v5] remoteproc: xlnx: add attach detach support
- Re: [PATCH v10 2/8] remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
- Re: [PATCH v10 2/8] remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
- Re: [PATCH v5] remoteproc: xlnx: add attach detach support
- Re: [PATCH v5] remoteproc: xlnx: add attach detach support
- Re: [PATCH v3 3/5] arm64: dts: qcom: sdx75: update reserved memory regions for mpss
- [PATCH v3 5/5] arm64: dts: qcom: sdx75-idp: enable MPSS remoteproc node
- [PATCH v3 4/5] arm64: dts: qcom: sdx75: Add remoteproc node
- [PATCH v3 3/5] arm64: dts: qcom: sdx75: update reserved memory regions for mpss
- [PATCH v3 2/5] remoteproc: qcom: pas: Add SDX75 remoteproc support
- [PATCH v3 1/5] dt-bindings: remoteproc: qcom,sm8550-pas: document the SDX75 PAS
- [PATCH v3 0/5] Add MPSS remoteproc support for SDX75
- Re: [PATCH v2 3/5] arm64: dts: qcom: sdx75: add missing qlink_logging reserved memory for mpss
- Re: [PATCH v3 1/1] dt-bindings: remoteproc: imx_rproc: add minItems for power-domain
- Re: [PATCH v5] remoteproc: xlnx: add attach detach support
- Re: [PATCH] remoteproc: imx_rproc: Fix refcount mistake in imx_rproc_addr_init
- Re: [PATCH v2 1/5] dt-bindings: remoteproc: qcom,sm8550-pas: document the SDX75 PAS
- From: Krzysztof Kozlowski
- [PATCH v2 1/5] dt-bindings: remoteproc: qcom,sm8550-pas: document the SDX75 PAS
- [PATCH v2 4/5] arm64: dts: qcom: sdx75: Add remoteproc node
- Re: [PATCH v2 5/5] arm64: dts: qcom: sdx75-idp: enable MPSS remoteproc node
- Re: [PATCH v2 4/5] arm64: dts: qcom: sdx75: Add remoteproc node
- [PATCH v2 0/5] Add MPSS remoteproc support for SDX75
- [PATCH v2 5/5] arm64: dts: qcom: sdx75-idp: enable MPSS remoteproc node
- [PATCH v2 3/5] arm64: dts: qcom: sdx75: add missing qlink_logging reserved memory for mpss
- [PATCH v2 2/5] remoteproc: qcom: pas: Add SDX75 remoteproc support
- Re: [PATCH V2] net: qrtr: ns: Ignore ENODEV failures in ns
- From: patchwork-bot+netdevbpf
- Re: [PATCH v2 00/13] OMAP mailbox FIFO removal
- Re: [PATCH v3 1/1] dt-bindings: remoteproc: imx_rproc: add minItems for power-domain
- Re: [PATCH v2 00/13] OMAP mailbox FIFO removal
- Re: [PATCH V1] rpmsg: glink: Make glink smem interrupt wakeup capable
- Re: [PATCH v2 00/13] OMAP mailbox FIFO removal
- Remoteproc/RPMSG patchset review order for June 12th 2024
- Re: [lvc-project] [PATCH] remoteproc: imx_rproc: Adjust phandle parsing issue while remapping optional addresses in imx_rproc_addr_init()
- [PATCH] remoteproc: imx_rproc: Fix refcount mistake in imx_rproc_addr_init
- Re: [PATCH V2 2/2] soc: qcom: smp2p: Introduce tracepoint support
- Re: [lvc-project] [PATCH] remoteproc: imx_rproc: Adjust phandle parsing issue while remapping optional addresses in imx_rproc_addr_init()
- [PATCH V2] net: qrtr: ns: Ignore ENODEV failures in ns
- Re: [PATCH V2 2/2] soc: qcom: smp2p: Introduce tracepoint support
- Re: [PATCH V2 1/2] soc: qcom: smp2p: Add remote name into smp2p irq devname
- Re: [PATCH 5/6] remoteproc: da8xx: Use devm action to release reserved memory
- Re: [PATCH V2 1/2] soc: qcom: smp2p: Add remote name into smp2p irq devname
- Re: [lvc-project] [PATCH] remoteproc: imx_rproc: Adjust phandle parsing issue while remapping optional addresses in imx_rproc_addr_init()
- Re: [PATCH V2 1/2] soc: qcom: smp2p: Add remote name into smp2p irq devname
- [PATCH V2 2/2] soc: qcom: smp2p: Introduce tracepoint support
- [PATCH V2 1/2] soc: qcom: smp2p: Add remote name into smp2p irq devname
- [PATCH V2 0/2] Add tracepoint support and remote name mapping to smp2p
- [PATCH v7 2/5] remoteproc: Add TEE support
- [PATCH v7 1/5] remoteproc: core: Introduce rproc_pa_to_va helper
- [PATCH v7 4/5] remoteproc: stm32: Create sub-functions to request shutdown and release
- [PATCH v7 5/5] remoteproc: stm32: Add support of an OP-TEE TA to load the firmware
- [PATCH v7 3/5] dt-bindings: remoteproc: Add compatibility for TEE support
- [PATCH v7 0/5] Introduction of a remoteproc tee to load signed firmware
- [PATCH v10 2/8] remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem
- [PATCH v10 6/8] arm64: dts: ti: k3-am642-sk: Add M4F remoteproc node
- [PATCH v10 8/8] arm64: defconfig: Enable TI K3 M4 remoteproc driver
- [PATCH v10 7/8] arm64: dts: ti: k3-am642-evm: Add M4F remoteproc node
- [PATCH v10 4/8] arm64: dts: ti: k3-am625-sk: Add M4F remoteproc node
- [PATCH v10 0/8] TI K3 M4F support on AM62 and AM64 SoCs
- [PATCH v10 5/8] arm64: dts: ti: k3-am64: Add M4F remoteproc node
- [PATCH v10 3/8] arm64: dts: ti: k3-am62: Add M4F remoteproc node
- [PATCH v10 1/8] dt-bindings: remoteproc: k3-m4f: Add K3 AM64x SoCs
- Re: [lvc-project] [PATCH] remoteproc: imx_rproc: Adjust phandle parsing issue while remapping optional addresses in imx_rproc_addr_init()
- Re: [PATCH v3] dt-bindings: remoteproc: k3-dsp: correct optional sram properties for AM62A SoCs
- Re: [PATCH] rpmsg: char: add missing MODULE_DESCRIPTION() macro
- Re: [PATCH v6 2/5] remoteproc: Add TEE support
- Re: [PATCH] remoteproc: imx_rproc: Adjust phandle parsing issue while remapping optional addresses in imx_rproc_addr_init()
- Re: [PATCH] remoteproc: mediatek: Increase MT8188 SCP core0 DRAM size
- [PATCH v5] remoteproc: xlnx: add attach detach support
- [PATCH v3 1/1] dt-bindings: remoteproc: imx_rproc: add minItems for power-domain
- [PATCH 4/6] remoteproc: da8xx: Use devm_rproc_alloc() helper
- [PATCH 1/6] remoteproc: omap: Use devm_rproc_alloc() helper
- [PATCH 2/6] remoteproc: omap: Use devm action to release reserved memory
- [PATCH 5/6] remoteproc: da8xx: Use devm action to release reserved memory
- [PATCH 6/6] remoteproc: da8xx: Use devm_rproc_add() helper
- [PATCH 3/6] remoteproc: omap: Use devm_rproc_add() helper
- Re: [PATCH v2 1/1] dt-bindings: remoteproc: imx_rproc: add minItems for power-domain
- From: Krzysztof Kozlowski
- Re: [PATCH v6 5/5] remoteproc: stm32: Add support of an OP-TEE TA to load the firmware
- Re: [PATCH v6 5/5] remoteproc: stm32: Add support of an OP-TEE TA to load the firmware
- Re: [PATCH v8 5/5] remoteproc: qcom: enable in-kernel PD mapper
- Re: [PATCH v8 4/5] soc: qcom: add pd-mapper implementation
- Re: [PATCH v6 3/5] dt-bindings: remoteproc: Add compatibility for TEE support
- Re: [PATCH v2 1/1] dt-bindings: remoteproc: imx_rproc: add minItems for power-domain
- Re: [PATCH v2] rpmsg: qcom_smd: Improve error handling for qcom_smd_parse_edge
- [PATCH v6 2/5] remoteproc: Add TEE support
- [PATCH v6 4/5] remoteproc: stm32: Create sub-functions to request shutdown and release
- [PATCH v6 1/5] remoteproc: core: Introduce rproc_pa_to_va helper
- [PATCH v6 0/5] Introduction of a remoteproc tee to load signed firmware
- [PATCH v6 5/5] remoteproc: stm32: Add support of an OP-TEE TA to load the firmware
- [PATCH v6 3/5] dt-bindings: remoteproc: Add compatibility for TEE support
- Re: [PATCH v2 1/1] dt-bindings: remoteproc: imx_rproc: add minItems for power-domain
- From: Krzysztof Kozlowski
- Re: [PATCH 1/5] dt-bindings: remoteproc: qcom,sm8550-pas: document the SDX75 PAS
- Re: [PATCH 3/5] arm64: dts: qcom: sdx75: add missing qlink_logging reserved memory for mpss
- Re: [PATCH v4] drivers: remoteproc: xlnx: add attach detach support
- Re: [PATCH v4] drivers: remoteproc: xlnx: add attach detach support
- Re: [PATCH] remoteproc: mediatek: Don't print error when optional scp handle is missing
- From: Nícolas F. R. A. Prado
- [PATCH v2] rpmsg: qcom_smd: Improve error handling for qcom_smd_parse_edge
- Re: [PATCH 1/5] dt-bindings: remoteproc: qcom,sm8550-pas: document the SDX75 PAS
- From: Krzysztof Kozlowski
- [PATCH 5/5] arm64: dts: qcom: sdx75-idp: enable MPSS remoteproc node
- [PATCH v2 1/1] dt-bindings: remoteproc: imx_rproc: add minItems for power-domain
- [PATCH 3/5] arm64: dts: qcom: sdx75: add missing qlink_logging reserved memory for mpss
- Re: [PATCH 3/5] arm64: dts: qcom: sdx75: add missing qlink_logging reserved memory for mpss
- From: Krzysztof Kozlowski
- [PATCH 4/5] arm64: dts: qcom: sdx75: Add remoteproc node
- [PATCH 2/5] remoteproc: qcom: pas: Add SDX75 remoteproc support
- [PATCH 1/5] dt-bindings: remoteproc: qcom,sm8550-pas: document the SDX75 PAS
- [PATCH 0/5] Add MPSS remoteproc support for SDX75
- Re: [PATCH] remoteproc: mediatek: Increase MT8188 SCP core0 DRAM size
- From: AngeloGioacchino Del Regno
- Re: [PATCH] remoteproc: mediatek: Don't print error when optional scp handle is missing
- From: AngeloGioacchino Del Regno
- Re: [PATCH v8 0/5] soc: qcom: add in-kernel pd-mapper implementation
- Re: [PATCH v8 1/5] soc: qcom: pdr: protect locator_addr with the main mutex
- [PATCH] remoteproc: mediatek: Increase MT8188 SCP core0 DRAM size
- RE: [PATCH] remoteproc: imx_rproc: Adjust phandle parsing issue while remapping optional addresses in imx_rproc_addr_init()
- [PATCH] remoteproc: imx_rproc: Adjust phandle parsing issue while remapping optional addresses in imx_rproc_addr_init()
- Re: [PATCH v3 1/5] dt-bindings: remoteproc: qcom,sa8775p-pas: Document the SA8775p ADSP, CDSP and GPDSP
- From: Krzysztof Kozlowski
- Re: [PATCH 1/1] dt-bindings: remoteproc: imx_rproc: add minItems for power-domain
- From: Krzysztof Kozlowski
- Re: [PATCH v8 2/5] soc: qcom: pdr: fix parsing of domains lists
- Re: [PATCH v8 1/5] soc: qcom: pdr: protect locator_addr with the main mutex
- [PATCH] remoteproc: mediatek: Don't print error when optional scp handle is missing
- From: Nícolas F. R. A. Prado
- [PATCH 1/1] dt-bindings: remoteproc: imx_rproc: add minItems for power-domain
- Re: [PATCH v4] drivers: remoteproc: xlnx: add attach detach support
- Re: [PATCH v4] drivers: remoteproc: xlnx: add attach detach support
- [PATCH v3 5/5] arm64: dts: qcom: sa8775p-ride: enable remoteprocs
- From: Bartosz Golaszewski
- [PATCH v3 4/5] arm64: dts: qcom: sa8775p: add ADSP, CDSP and GPDSP nodes
- From: Bartosz Golaszewski
- [PATCH v3 3/5] remoteproc: qcom_q6v5_pas: Add support for SA8775p ADSP, CDSP and GPDSP
- From: Bartosz Golaszewski
- [PATCH v3 2/5] dt-bindings: mailbox: qcom-ipcc: Add GPDSP0 and GPDSP1 clients
- From: Bartosz Golaszewski
- [PATCH v3 1/5] dt-bindings: remoteproc: qcom,sa8775p-pas: Document the SA8775p ADSP, CDSP and GPDSP
- From: Bartosz Golaszewski
- [PATCH v3 0/5] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP
- From: Bartosz Golaszewski
- Re: [PATCH v2 2/3] remoteproc: k3-r5: Acquire mailbox handle during probe
- From: Beleswar Prasad Padhi
- Re: [PATCH v3] dt-bindings: remoteproc: k3-dsp: correct optional sram properties for AM62A SoCs
- From: Krzysztof Kozlowski
- [PATCH] rpmsg: char: add missing MODULE_DESCRIPTION() macro
- Re: [PATCH V1] rpmsg: glink: Make glink smem interrupt wakeup capable
- Re: (subset) [PATCH 0/7] Use mboxes instead of syscon for APCS (arm32 & arm64)
- Re: [PATCH v4] drivers: remoteproc: xlnx: add attach detach support
- [PATCH v3] dt-bindings: remoteproc: k3-dsp: correct optional sram properties for AM62A SoCs
- Re: [PATCH v2 2/3] remoteproc: k3-r5: Acquire mailbox handle during probe
- Re: [PATCH v4] drivers: remoteproc: xlnx: add attach detach support
- Re: [RESEND PATCH v5 3/7] dt-bindings: remoteproc: Add processor identifier property
- Re: [PATCH 2/3] remoteproc: k3-r5: Acquire mailbox handle during probe
- From: Beleswar Prasad Padhi
- [PATCH v2 3/3] remoteproc: k3-dsp: Acquire mailbox handle during probe routine
- [PATCH v2 2/3] remoteproc: k3-r5: Acquire mailbox handle during probe
- [PATCH v2 1/3] remoteproc: k3-r5: Use devm_rproc_alloc() helper
- [PATCH v2 0/3] Defer TI's Remoteproc's Probe until Mailbox is Probed
- [PATCH v4] drivers: remoteproc: xlnx: add attach detach support
- [PATCH v3] drivers: remoteproc: xlnx: add attach detach support
- Re: [RESEND PATCH v5 3/7] dt-bindings: remoteproc: Add processor identifier property
- Re: [PATCH v5 5/7] remoteproc: core: support of the tee interface
- Re: [PATCH V1] rpmsg: glink: Make glink smem interrupt wakeup capable
- Re: [PATCH v5 5/7] remoteproc: core: support of the tee interface
- [PATCH V1] rpmsg: glink: Make glink smem interrupt wakeup capable
- Re: [PATCH V2] net: qrtr: ns: Ignore ENODEV failures in ns
- Re: [PATCH 02/12] wifi: wcn36xx: make use of QCOM_FW_HELPER
- Re: [PATCH 01/12] soc: qcom: add firmware name helper
- Re: [PATCH v5 5/7] remoteproc: core: support of the tee interface
- Re: [PATCH v2] dt-bindings: remoteproc: k3-dsp: correct optional sram properties for AM62A SoCs
- From: Krzysztof Kozlowski
- Re: [PATCH v8 0/5] soc: qcom: add in-kernel pd-mapper implementation
- [PATCH v2] dt-bindings: remoteproc: k3-dsp: correct optional sram properties for AM62A SoCs
- Re: [PATCH v5 5/7] remoteproc: core: support of the tee interface
- Re: [PATCH 2/3] remoteproc: k3-r5: Acquire mailbox handle during probe
- [PATCH V2] net: qrtr: ns: Ignore ENODEV failures in ns
- [PATCH 1/3] remoteproc: k3-r5: Use devm_rproc_alloc() helper
- [PATCH 0/3] Defer TI's Remoteproc's Probe until Mailbox is Probed
- [PATCH 3/3] remoteproc: k3-dsp: Acquire mailbox handle during probe routine
- [PATCH 2/3] remoteproc: k3-r5: Acquire mailbox handle during probe
- Re: [PATCH v5 5/7] remoteproc: core: support of the tee interface
- Re: (subset) [PATCH v3 0/4] Add support for hwspinlock bust
- Re: [PATCH v5 5/7] remoteproc: core: support of the tee interface
- Re: [PATCH v3 3/4] soc: qcom: smem: Add qcom_smem_bust_hwspin_lock_by_host()
- [PATCH v3 0/4] Add support for hwspinlock bust
- [PATCH v3 2/4] hwspinlock: qcom: implement bust operation
- [PATCH v3 4/4] remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
- [PATCH v3 3/4] soc: qcom: smem: Add qcom_smem_bust_hwspin_lock_by_host()
- [PATCH v3 1/4] hwspinlock: Introduce hwspin_lock_bust()
- Re: [PATCH 1/5] dt-bindings: remoteproc: qcom,sm8550-pas: Document the SA8775p ADSP, CDSP and GPDSP
- Re: [PATCH v5 5/7] remoteproc: core: support of the tee interface
- Re: [PATCH 01/12] soc: qcom: add firmware name helper
- Re: [PATCH v2 4/4] remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
- Re: [PATCH v2 2/4] hwspinlock: qcom: implement bust operation
- Re: [PATCH v2 1/4] hwspinlock: Introduce hwspin_lock_bust()
- Re: Re: [PATCH v2 3/4] soc: qcom: smem: Add qcom_smem_bust_hwspin_lock_by_host()
- Re: (subset) [PATCH 0/2] Mark qcom,ipc as deprecated in two schemas
- Re: [PATCH v2 3/4] soc: qcom: smem: Add qcom_smem_bust_hwspin_lock_by_host()
- Re: [PATCH v2 3/4] soc: qcom: smem: Add qcom_smem_bust_hwspin_lock_by_host()
- Re: [PATCH v5 5/7] remoteproc: core: support of the tee interface
- Re: [PATCH v10] remoteproc: qcom: Move minidump related layout and API to soc/qcom directory
- Re: [PATCH v5 4/7] remoteproc: core introduce rproc_set_rsc_table_on_start function
- Re: [PATCH v5 2/7] dt-bindings: remoteproc: Add compatibility for TEE support
- Re: [PATCH] remoteproc: stm32_rproc: Fix mailbox interrupts queuing
- Re: (subset) [PATCH v2 0/3] arm64: dts: qcom: msm8996: enable fastrpc and glink-edge
- Re: [PATCH v2 1/5] dt-bindings: remoteproc: qcom,sa8775p-pas: Document the SA8775p ADSP, CDSP and GPDSP
- From: Krzysztof Kozlowski
- Re: [PATCH v2 1/5] dt-bindings: remoteproc: qcom,sa8775p-pas: Document the SA8775p ADSP, CDSP and GPDSP
- From: Bartosz Golaszewski
- Re: [PATCH v2 4/5] arm64: dts: qcom: sa8775p: add ADSP, CDSP and GPDSP nodes
- Re: [PATCH v2 3/5] remoteproc: qcom_q6v5_pas: Add support for SA8775p ADSP, CDSP and GPDSP
- Re: [PATCH v2 1/5] dt-bindings: remoteproc: qcom,sa8775p-pas: Document the SA8775p ADSP, CDSP and GPDSP
- Re: [PATCH 01/12] soc: qcom: add firmware name helper
- Re: [PATCH v2 5/5] arm64: dts: qcom: sa8775p-ride: enable remoteprocs
- Re: [PATCH v2 4/5] arm64: dts: qcom: sa8775p: add ADSP, CDSP and GPDSP nodes
- Re: [PATCH v2 3/5] remoteproc: qcom_q6v5_pas: Add support for SA8775p ADSP, CDSP and GPDSP
- Re: [PATCH v2 1/5] dt-bindings: remoteproc: qcom,sa8775p-pas: Document the SA8775p ADSP, CDSP and GPDSP
- From: Krzysztof Kozlowski
- [PATCH v2 5/5] arm64: dts: qcom: sa8775p-ride: enable remoteprocs
- From: Bartosz Golaszewski
- [PATCH v2 4/5] arm64: dts: qcom: sa8775p: add ADSP, CDSP and GPDSP nodes
- From: Bartosz Golaszewski
- [PATCH v2 3/5] remoteproc: qcom_q6v5_pas: Add support for SA8775p ADSP, CDSP and GPDSP
- From: Bartosz Golaszewski
- [PATCH v2 2/5] dt-bindings: mailbox: qcom-ipcc: Add GPDSP0 and GPDSP1 clients
- From: Bartosz Golaszewski
- [PATCH v2 1/5] dt-bindings: remoteproc: qcom,sa8775p-pas: Document the SA8775p ADSP, CDSP and GPDSP
- From: Bartosz Golaszewski
- [PATCH v2 0/5] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP
- From: Bartosz Golaszewski
- Re: [PATCH 5/7] dt-bindings: remoteproc: qcom,pas: Add hwlocks
- From: Krzysztof Kozlowski
- [PATCH v2 0/4] Add support for hwspinlock bust
- [PATCH v2 4/4] remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
- [PATCH v2 1/4] hwspinlock: Introduce hwspin_lock_bust()
- [PATCH v2 3/4] soc: qcom: smem: Add qcom_smem_bust_hwspin_lock_by_host()
- [PATCH v2 2/4] hwspinlock: qcom: implement bust operation
- Re: [PATCH 5/7] dt-bindings: remoteproc: qcom,pas: Add hwlocks
- Re: [PATCH v2 1/2] drivers: remoteproc: xlnx: add attach detach support
- Re: [PATCH v2 1/2] drivers: remoteproc: xlnx: add attach detach support
- Re: [PATCH 5/7] dt-bindings: remoteproc: qcom,pas: Add hwlocks
- From: Krzysztof Kozlowski
- Re: [PATCH 01/12] soc: qcom: add firmware name helper
- Re: [PATCH 09/12] remoteproc: qcom_wcnss: make use of QCOM_FW_HELPER
- Re: [PATCH 09/12] remoteproc: qcom_wcnss: make use of QCOM_FW_HELPER
- Re: [PATCH 7/7] arm64: dts: qcom: sm8650: Add hwlock to remoteproc
- Re: [PATCH 5/7] dt-bindings: remoteproc: qcom,pas: Add hwlocks
- Re: [PATCH v2 1/2] drivers: remoteproc: xlnx: add attach detach support
- Re: [PATCH 2/5] dt-bindings: mailbox: qcom-ipcc: Add GPDSP0 and GPDSP1 clients
- From: Krzysztof Kozlowski
- Re: [PATCH 1/5] dt-bindings: remoteproc: qcom,sm8550-pas: Document the SA8775p ADSP, CDSP and GPDSP
- From: Bartosz Golaszewski
- Re: [PATCH 1/5] dt-bindings: remoteproc: qcom,sm8550-pas: Document the SA8775p ADSP, CDSP and GPDSP
- Re: [PATCH 1/5] dt-bindings: remoteproc: qcom,sm8550-pas: Document the SA8775p ADSP, CDSP and GPDSP
- From: Bartosz Golaszewski
- Re: [PATCH vhost v9 0/6] refactor the params of find_vqs()
- Re: [PATCH vhost v9 0/6] refactor the params of find_vqs()
- Re: [PATCH 1/5] dt-bindings: remoteproc: qcom,sm8550-pas: Document the SA8775p ADSP, CDSP and GPDSP
- Re: [PATCH vhost v9 0/6] refactor the params of find_vqs()
- Re: [PATCH vhost v9 0/6] refactor the params of find_vqs()
- [PATCH 5/5] arm64: dts: qcom: sa8775p-ride: enable remoteprocs
- From: Bartosz Golaszewski
- [PATCH 4/5] arm64: dts: qcom: sa8775p: add ADSP, CDSP and GPDSP nodes
- From: Bartosz Golaszewski
- [PATCH 3/5] remoteproc: qcom_q6v5_pas: Add support for SA8775p ADSP, CDSP and GPDSP
- From: Bartosz Golaszewski
- [PATCH 2/5] dt-bindings: mailbox: qcom-ipcc: Add GPDSP0 and GPDSP1 clients
- From: Bartosz Golaszewski
- [PATCH 1/5] dt-bindings: remoteproc: qcom,sm8550-pas: Document the SA8775p ADSP, CDSP and GPDSP
- From: Bartosz Golaszewski
- [PATCH 0/5] arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP
- From: Bartosz Golaszewski
- Re: [PATCH 7/7] arm64: dts: qcom: sm8650: Add hwlock to remoteproc
- From: Krzysztof Kozlowski
- Re: [PATCH 5/7] dt-bindings: remoteproc: qcom,pas: Add hwlocks
- From: Krzysztof Kozlowski
- Re: [PATCH 6/7] remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
- Re: [PATCH 06/12] remoteproc: qcom_q6v5_pas: switch to mbn files by default
- Re: [PATCH 5/7] dt-bindings: remoteproc: qcom,pas: Add hwlocks
- Re: [GIT PULL] remoteproc updates for v6.10
- Re: [GIT PULL] rpmsg updates for v6.10
- Re: [PATCH v2 1/2] drivers: remoteproc: xlnx: add attach detach support
- Re: [PATCH 6/7] remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
- Re: [PATCH] rpmsg: char: fix rpmsg_eptdev structure documentation
- Re: [PATCH] remoteproc: mediatek: Zero out only remaining bytes of IPI buffer
- [PATCH] remoteproc: stm32_rproc: Fix mailbox interrupts queuing
- Re: [PATCH 01/12] soc: qcom: add firmware name helper
- [RESEND PATCH v5 7/7] remoteproc: stm32: Add support of an OP-TEE TA to load the firmware
- [RESEND PATCH v5 4/7] remoteproc: core introduce rproc_set_rsc_table_on_start function
- [RESEND PATCH v5 2/7] dt-bindings: remoteproc: Add compatibility for TEE support
- [RESEND PATCH v5 1/7] remoteproc: Add TEE support
- [RESEND PATCH v5 5/7] remoteproc: core: support of the tee interface
- [RESEND PATCH v5 0/7] Introduction of a remoteproc tee to load signed firmware
- [RESEND PATCH v5 3/7] dt-bindings: remoteproc: Add processor identifier property
- [RESEND PATCH v5 6/7] remoteproc: stm32: Create sub-functions to request shutdown and release
- Re: [PATCH v5 2/7] dt-bindings: remoteproc: Add compatibility for TEE support
- Re: [PATCH 01/12] soc: qcom: add firmware name helper
- Re: [PATCH 01/12] soc: qcom: add firmware name helper
- Re: [PATCH 06/12] remoteproc: qcom_q6v5_pas: switch to mbn files by default
- Re: [PATCH 01/12] soc: qcom: add firmware name helper
- Re: [PATCH 06/12] remoteproc: qcom_q6v5_pas: switch to mbn files by default
- [PATCH 12/12] arm64: dts: qcom: apq8096-db820c: drop firmware-name properties
- [PATCH 11/12] arm64: dts: qcom: apq8016-sbc: drop firmware-name properties
- [PATCH 10/12] remoteproc: qcom_wcnss: make use of QCOM_FW_HELPER
- [PATCH 09/12] remoteproc: qcom_wcnss: make use of QCOM_FW_HELPER
- [PATCH 08/12] remoteproc: qcom_wcnss: switch to mbn files by default
- [PATCH 07/12] remoteproc: qcom_q6v5_pas: make use of QCOM_FW_HELPER
- [PATCH 06/12] remoteproc: qcom_q6v5_pas: switch to mbn files by default
- [PATCH 05/12] remoteproc: qcom_q6v5_mss: make use of QCOM_FW_HELPER
- [PATCH 04/12] remoteproc: qcom_q6v5_mss: switch to mbn files by default
- [PATCH 03/12] soc: qcom: wcnss_ctrl: make use of QCOM_FW_HELPER
- [PATCH 02/12] wifi: wcn36xx: make use of QCOM_FW_HELPER
- [PATCH 01/12] soc: qcom: add firmware name helper
- [PATCH 00/12] arm64: qcom: autodetect firmware paths
- Re: [PATCH v5 2/7] dt-bindings: remoteproc: Add compatibility for TEE support
- From: Krzysztof Kozlowski
- [PATCH v5 4/7] remoteproc: core introduce rproc_set_rsc_table_on_start function
- [PATCH v5 1/7] remoteproc: Add TEE support
- [PATCH v5 6/7] remoteproc: stm32: Create sub-functions to request shutdown and release
- [PATCH v5 7/7] remoteproc: stm32: Add support of an OP-TEE TA to load the firmware
- [PATCH v5 2/7] dt-bindings: remoteproc: Add compatibility for TEE support
- [PATCH v5 0/7] Introduction of a remoteproc tee to load signed firmware
- [PATCH v5 5/7] remoteproc: core: support of the tee interface
[Index of Archives]
[Linux Sound]
[ALSA Users]
[ALSA Devel]
[Linux Audio Users]
[Linux Media]
[Kernel]
[Photo Sharing]
[Gimp]
[Yosemite News]
[Linux Media]