On Fri, Aug 30, 2024 at 11:51:46AM +0200, Arnaud Pouliquen wrote:
> To prepare for the support of TEE remoteproc, create sub-functions
> that can be used in both cases, with and without remoteproc TEE support.
>
> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@xxxxxxxxxxx>
> ---
> drivers/remoteproc/stm32_rproc.c | 84 +++++++++++++++++++-------------
> 1 file changed, 51 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
> index 8c7f7950b80e..79c638936163 100644
> --- a/drivers/remoteproc/stm32_rproc.c
> +++ b/drivers/remoteproc/stm32_rproc.c
> @@ -209,6 +209,54 @@ static int stm32_rproc_mbox_idx(struct rproc *rproc, const unsigned char *name)
> return -EINVAL;
> }
>
> +static void stm32_rproc_request_shutdown(struct rproc *rproc)
> +{
> + struct stm32_rproc *ddata = rproc->priv;
> + int err, dummy_data, idx;
> +
> + /* Request shutdown of the remote processor */
> + if (rproc->state != RPROC_OFFLINE && rproc->state != RPROC_CRASHED) {
> + idx = stm32_rproc_mbox_idx(rproc, STM32_MBX_SHUTDOWN);
> + if (idx >= 0 && ddata->mb[idx].chan) {
> + /* A dummy data is sent to allow to block on transmit. */
> + err = mbox_send_message(ddata->mb[idx].chan,
> + &dummy_data);
When refactoring functions, please do not change the inner code. Here
@dummy_data was introduced. Making changes, even small ones, makes it really
hard to review your work. I'm pretty sure we talked about that before.
> + if (err < 0)
> + dev_warn(&rproc->dev, "warning: remote FW shutdown without ack\n");
> + }
> + }
> +}
> +
> +static int stm32_rproc_release(struct rproc *rproc)
> +{
> + struct stm32_rproc *ddata = rproc->priv;
> + unsigned int err = 0;
> +
> + /* To allow platform Standby power mode, set remote proc Deep Sleep. */
> + if (ddata->pdds.map) {
> + err = regmap_update_bits(ddata->pdds.map, ddata->pdds.reg,
> + ddata->pdds.mask, 1);
> + if (err) {
> + dev_err(&rproc->dev, "failed to set pdds\n");
> + return err;
> + }
> + }
> +
> + /* Update coprocessor state to OFF if available. */
> + if (ddata->m4_state.map) {
> + err = regmap_update_bits(ddata->m4_state.map,
> + ddata->m4_state.reg,
> + ddata->m4_state.mask,
> + M4_STATE_OFF);
> + if (err) {
> + dev_err(&rproc->dev, "failed to set copro state\n");
> + return err;
> + }
> + }
> +
> + return 0;
> +}
> +
> static int stm32_rproc_prepare(struct rproc *rproc)
> {
> struct device *dev = rproc->dev.parent;
> @@ -519,17 +567,9 @@ static int stm32_rproc_detach(struct rproc *rproc)
> static int stm32_rproc_stop(struct rproc *rproc)
> {
> struct stm32_rproc *ddata = rproc->priv;
> - int err, idx;
> + int err;
>
> - /* request shutdown of the remote processor */
> - if (rproc->state != RPROC_OFFLINE && rproc->state != RPROC_CRASHED) {
> - idx = stm32_rproc_mbox_idx(rproc, STM32_MBX_SHUTDOWN);
> - if (idx >= 0 && ddata->mb[idx].chan) {
> - err = mbox_send_message(ddata->mb[idx].chan, "detach");
> - if (err < 0)
> - dev_warn(&rproc->dev, "warning: remote FW shutdown without ack\n");
> - }
> - }
> + stm32_rproc_request_shutdown(rproc);
>
> err = stm32_rproc_set_hold_boot(rproc, true);
> if (err)
> @@ -541,29 +581,7 @@ static int stm32_rproc_stop(struct rproc *rproc)
> return err;
> }
>
> - /* to allow platform Standby power mode, set remote proc Deep Sleep */
> - if (ddata->pdds.map) {
> - err = regmap_update_bits(ddata->pdds.map, ddata->pdds.reg,
> - ddata->pdds.mask, 1);
> - if (err) {
> - dev_err(&rproc->dev, "failed to set pdds\n");
> - return err;
> - }
> - }
> -
> - /* update coprocessor state to OFF if available */
> - if (ddata->m4_state.map) {
> - err = regmap_update_bits(ddata->m4_state.map,
> - ddata->m4_state.reg,
> - ddata->m4_state.mask,
> - M4_STATE_OFF);
> - if (err) {
> - dev_err(&rproc->dev, "failed to set copro state\n");
> - return err;
> - }
> - }
> -
> - return 0;
> + return stm32_rproc_release(rproc);
> }
>
> static void stm32_rproc_kick(struct rproc *rproc, int vqid)
> --
> 2.25.1
>
