From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
Enable all remoteproc nodes on the sa8775p-ride board and point to the
appropriate firmware files.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
index 2a6170623ea9..0c1b21def4b6 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
@@ -702,6 +702,31 @@ &pcie1_phy {
status = "okay";
};
+&remoteproc_adsp {
+ firmware-name = "qcom/sa8775p/adsp.mbn";
+ status = "okay";
+};
+
+&remoteproc_cdsp0 {
+ firmware-name = "qcom/sa8775p/cdsp0.mbn";
+ status = "okay";
+};
+
+&remoteproc_cdsp1 {
+ firmware-name = "qcom/sa8775p/cdsp1.mbn";
+ status = "okay";
+};
+
+&remoteproc_gpdsp0 {
+ firmware-name = "qcom/sa8775p/gpdsp0.mbn";
+ status = "okay";
+};
+
+&remoteproc_gpdsp1 {
+ firmware-name = "qcom/sa8775p/gpdsp1.mbn";
+ status = "okay";
+};
+
&uart10 {
compatible = "qcom,geni-debug-uart";
pinctrl-0 = <&qup_uart10_default>;
--
2.43.0
