Hi Krzysztof, > > Add devicetree binding schema for the External Systems remote processors > > > > The External Systems remote processors are provided on the Corstone-1000 > > IoT Reference Design Platform via the SSE-710 subsystem. > > > > For more details about the External Systems, please see Corstone SSE-710 > > subsystem features [1]. > > > > Do not attach (thread) your patchsets to some other threads (unrelated > or older versions). This buries them deep in the mailbox and might > interfere with applying entire sets. > > > [1]: https://developer.arm.com/documentation/102360/0000/Overview-of-Corstone-1000/Corstone-SSE-710-subsystem-features > > > > Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@xxxxxxx> > > --- > > .../remoteproc/arm,sse710-extsys.yaml | 90 +++++++++++++++++++ > > 1 file changed, 90 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/remoteproc/arm,sse710-extsys.yaml > > > > diff --git a/Documentation/devicetree/bindings/remoteproc/arm,sse710-extsys.yaml b/Documentation/devicetree/bindings/remoteproc/arm,sse710-extsys.yaml > > new file mode 100644 > > index 000000000000..827ba8d962f1 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/remoteproc/arm,sse710-extsys.yaml > > @@ -0,0 +1,90 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/remoteproc/arm,sse710-extsys.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: SSE-710 External System Remote Processor > > + > > +maintainers: > > + - Abdellatif El Khlifi <abdellatif.elkhlifi@xxxxxxx> > > + - Hugues Kamba Mpiana <hugues.kambampiana@xxxxxxx> > > + > > +description: | > > dt-preserve-formatting Do you mean I should remove the '|' please ? (I didn't find examples of use of dt-preserve-formatting in Documentation/devicetree/bindings/) > > > + SSE-710 is an heterogeneous subsystem supporting up to two remote > > + processors aka the External Systems. > > + > > +properties: > > + compatible: > > + enum: > > + - arm,sse710-extsys > > + > > + firmware-name: > > + description: > > + The default name of the firmware to load to the remote processor. > > + > > + '#extsys-id': > > '#' is not correct for sure, that's not a cell specifier. > > But anyway, we do not accept in general instance IDs. I'm happy to replace the instance ID with another solution. In our case the remoteproc instance does not have a base address to use. So, we can't put remoteproc@address What do you recommend in this case please ? Kind regards, Abdellatif
