Re: [PATCH V2 1/4] dt-bindings: remoteproc: qcom: document hexagon based WCSS secure PIL

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 29, 2024 at 07:10:18PM GMT, Gokul Sriram Palanisamy wrote:
> From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
> 
> Add new binding document for hexagon based WCSS secure PIL remoteproc.
> IPQ5332, IPQ9574 follows secure PIL remoteproc.

What is the difference between PAS and secure PIL?

> 
> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
> Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@xxxxxxxxxxx>
> ---
> changes since v1: Addressed comments by Krzysztof
> 	- expanded the acronym WCSS
> 	- added 'maxItems' to property 'firmware-name'
> 	- renamed sleep clock name 'im_sleep' to 'sleep'
> 	- reordered items of property 'qcom,smem-states' keeping 'stop'
> 	  first. Addressed the same in example and in dtsi files.
> 	- ordered required properties in the same order as property description
> 	- dropped unused label 'q6v5_wcss' in example dts
> 
>  .../remoteproc/qcom,wcss-sec-pil.yaml         | 125 ++++++++++++++++++
>  1 file changed, 125 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,wcss-sec-pil.yaml
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcss-sec-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,wcss-sec-pil.yaml
> new file mode 100644
> index 000000000000..98206b403681
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcss-sec-pil.yaml
> @@ -0,0 +1,125 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/qcom,wcss-sec-pil.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm WCSS Secure Peripheral Image Loader
> +
> +maintainers:
> +  - Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
> +
> +description:
> +  Wireless Connectivity Subsystem (WCSS) Secure Peripheral Image Loader loads
> +  firmware and power up QDSP6 remoteproc on the Qualcomm IPQ9574, IPQ5332 SoC.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,ipq5332-wcss-sec-pil
> +      - qcom,ipq9574-wcss-sec-pil
> +
> +  reg:
> +    maxItems: 1
> +
> +  firmware-name:
> +    maxItems: 1
> +    description: Firmware name for the Hexagon core
> +
> +  interrupts:
> +    items:
> +      - description: Watchdog interrupt
> +      - description: Fatal interrupt
> +      - description: Ready interrupt
> +      - description: Handover interrupt
> +      - description: Stop acknowledge interrupt

Does it make sense to make use of qcom,pas-common.yaml?

> +
> +  interrupt-names:
> +    items:
> +      - const: wdog
> +      - const: fatal
> +      - const: ready
> +      - const: handover
> +      - const: stop-ack
> +
-- 
With best wishes
Dmitry




[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux