Re: [PATCH] remoteproc: k3-r5: Fix driver shutdown

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 20-08-2024 20:29, Beleswar Prasad Padhi wrote:

On 20-08-2024 19:50, Jan Kiszka wrote:
On 20.08.24 11:48, Beleswar Prasad Padhi wrote:
On 20-08-2024 15:09, Jan Kiszka wrote:
On 20.08.24 11:30, Beleswar Prasad Padhi wrote:
Hi Jan,

On 19-08-2024 22:17, Jan Kiszka wrote:
From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>

When k3_r5_cluster_rproc_exit is run, core 1 is shutdown and removed
first. When core 0 should then be stopped before its removal, it will
find core1->rproc as NULL already and crashes. Happens on rmmod e.g.
Did you check this on top of -next-20240820 tag? There was a series[0] which was merged recently which fixed this condition. I don't see this
issue when trying on top of -next-20240820 tag.
[0]:
https://lore.kernel.org/all/20240808074127.2688131-1-b-padhi@xxxxxx/

I didn't try those yet, I was on 6.11-rcX. But from reading them
quickly, I'm not seeing the two issues I found directly addressed there.
Check the comment by Andrew Davis[0], that addresses the above issue.

[0]:
https://lore.kernel.org/all/0bba5293-a55d-4f13-887c-272a54d6e1ca@xxxxxx/

OK, then someone still needs to update his patch accordingly.
That comment was addressed in the v4 series revision[1] and was merged to linux-next, available with tag -next-20240820. Request you to please check if the issue persists with -next-20240820 tag. I checked myself, and was not able to reproduce.
[1]: https://lore.kernel.org/all/Zr9nbWnADDB+ZOlg@p14s/

Fixes: 3c8a9066d584 ("remoteproc: k3-r5: Do not allow core1 to power
up before core0 via sysfs")
CC: stable@xxxxxxxxxxxxxxx
Signed-off-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
---

There might be one more because I can still make this driver crash
after an operator error. Were error scenarios tested at all?
Can you point out what is this issue more specifically, and I can take
this up then.
Try starting core1 before core0, and then again - system will hang or
If you are trying to stop and then start the cores from sysfs, that is
not yet supported. The hang is thus expected.
What? Then the driver is broken, even more. Why wasn't it fully implemented?


Just wanted to point out that this "graceful shutdown" feature is majorly dependent on the Device Manager Firmware(point 3) and minimal changes to the remoteproc driver (point 2 and 4). Thus, as soon as Firmware is capable, we will send out the patches for this feature.

The driver is capable of starting a core and stopping it all well. The problem is, when we stop a core from sysfs (without resetting the SoC itself), the remotecore is powered off, but its resources are not relinquished. So when we start it back, there could be some memory corruptions. This feature of "graceful shutdown" of remotecores is almost implemented and will be posted to this driver soon. Request you to try out after that.

With graceful shutdown feature, this will be the flow:
1. We issue a core stop operation from sysfs.
2. The remoteproc driver sends a special "SHUTDOWN" mailbox message to the remotecore. 3. The remotecore relinquishes all of its acquired resources through Device Manager Firmware and sends an ACK back. 4. The remotecore enters WFI state and then is resetted through Host core. 5. Then, if we try to do the core start operation from sysfs, core should be up as expected.

Thanks,
Beleswar

Jan





[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux