Re: [PATCH] remoteproc: k3-r5: Fix driver shutdown

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 20-08-2024 15:09, Jan Kiszka wrote:
On 20.08.24 11:30, Beleswar Prasad Padhi wrote:
Hi Jan,

On 19-08-2024 22:17, Jan Kiszka wrote:
From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>

When k3_r5_cluster_rproc_exit is run, core 1 is shutdown and removed
first. When core 0 should then be stopped before its removal, it will
find core1->rproc as NULL already and crashes. Happens on rmmod e.g.

Did you check this on top of -next-20240820 tag? There was a series[0]
which was merged recently which fixed this condition. I don't see this
issue when trying on top of -next-20240820 tag.
[0]: https://lore.kernel.org/all/20240808074127.2688131-1-b-padhi@xxxxxx/

I didn't try those yet, I was on 6.11-rcX. But from reading them
quickly, I'm not seeing the two issues I found directly addressed there.

Check the comment by Andrew Davis[0], that addresses the above issue.

[0]: https://lore.kernel.org/all/0bba5293-a55d-4f13-887c-272a54d6e1ca@xxxxxx/


Fixes: 3c8a9066d584 ("remoteproc: k3-r5: Do not allow core1 to power
up before core0 via sysfs")
CC: stable@xxxxxxxxxxxxxxx
Signed-off-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
---

There might be one more because I can still make this driver crash
after an operator error. Were error scenarios tested at all?

Can you point out what is this issue more specifically, and I can take
this up then.
Try starting core1 before core0, and then again - system will hang or
If you are trying to stop and then start the cores from sysfs, that is not yet supported. The hang is thus expected.
crash while trying to wipe ATCM. I do not understand this problem yet -
same VA is used, and I cannot see where/how the region should have been
unmapped in between.

Jan

   drivers/remoteproc/ti_k3_r5_remoteproc.c | 3 ++-
   1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/ti_k3_r5_remoteproc.c
b/drivers/remoteproc/ti_k3_r5_remoteproc.c
index eb09d2e9b32a..9ebd7a34e638 100644
--- a/drivers/remoteproc/ti_k3_r5_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_r5_remoteproc.c
@@ -646,7 +646,8 @@ static int k3_r5_rproc_stop(struct rproc *rproc)
           /* do not allow core 0 to stop before core 1 */
           core1 = list_last_entry(&cluster->cores, struct k3_r5_core,
                       elem);
-        if (core != core1 && core1->rproc->state != RPROC_OFFLINE) {
+        if (core != core1 && core1->rproc &&
+            core1->rproc->state != RPROC_OFFLINE) {
               dev_err(dev, "%s: can not stop core 0 before core 1\n",
                   __func__);
               ret = -EPERM;




[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux