On Wed, 04 Sep 2024 16:33:41 +0800, Jingyi Wang wrote: > Add initial support for QCS8300 SoC and QCS8300 RIDE board. > > This revision brings support for: > - CPUs with cpu idle > - interrupt-controller with PDC wakeup support > - gcc > - TLMM > - interconnect > - qup with uart > - smmu > - pmic > - ufs > - ipcc > - sram > - remoteprocs including ADSP,CDSP and GPDSP > > Signed-off-by: Jingyi Wang <quic_jingyw@xxxxxxxxxxx> > --- > patch series organized as: > - 1-2: remoteproc binding and driver > - 3-5: ufs binding and driver > - 6-7: rpmhpd binding and driver > - 8-15: bindings for other components found on the SoC > - 16-19: changes to support the device tree > > dependencies: > tlmm: https://lore.kernel.org/linux-arm-msm/20240819064933.1778204-1-quic_jingyw@xxxxxxxxxxx/ > gcc: https://lore.kernel.org/all/20240820-qcs8300-gcc-v1-0-d81720517a82@xxxxxxxxxxx/ > interconnect: https://lore.kernel.org/linux-arm-msm/20240827151622.305-1-quic_rlaggysh@xxxxxxxxxxx/ > > dtb check got following err: > /local/mnt/workspace/jingyi/aim500/linux/arch/arm64/boot/dts/qcom/qcs8300-ride.dtb: interconnect@1680000: Unevaluated properties are not allowed ('reg' was unexpected) > which is cause by "reg" compatible missing in dt binding, will be fixed in interconnect patch series. > > --- > Jingyi Wang (11): > dt-bindings: remoteproc: qcom,sa8775p-pas: Document QCS8300 remoteproc > remoteproc: qcom: pas: Add QCS8300 remoteproc support > dt-bindings: qcom,pdc: document QCS8300 Power Domain Controller > dt-bindings: soc: qcom: add qcom,qcs8300-imem compatible > dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC > dt-bindings: mfd: qcom,tcsr: Add compatible for QCS8300 > dt-bindings: nvmem: qfprom: Add compatible for QCS8300 > dt-bindings: arm: qcom: document QCS8275/QCS8300 SoC and reference board > arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS8300 > arm64: dts: qcom: add initial support for QCS8300 DTSI > arm64: dts: qcom: add base QCS8300 RIDE dts > > Kyle Deng (1): > dt-bindings: soc: qcom,aoss-qmp: Document the QCS8300 AOSS channel > > Shazad Hussain (1): > dt-bindings: power: rpmpd: Add QCS8300 power domains > > Tingguo Cheng (1): > pmdomain: qcom: rpmhpd: Add QCS8300 power domains > > Xin Liu (3): > dt-bindings: phy: Add QMP UFS PHY comptible for QCS8300 > dt-bindings: ufs: qcom: Document the QCS8300 UFS Controller > phy: qcom-qmp-ufs: Add support for QCS8300 > > Zhenhua Huang (2): > dt-bindings: arm-smmu: Add compatible for QCS8300 SoC > dt-bindings: firmware: qcom,scm: document SCM on QCS8300 SoCs > > Documentation/devicetree/bindings/arm/qcom.yaml | 8 + > .../devicetree/bindings/firmware/qcom,scm.yaml | 1 + > .../bindings/interrupt-controller/qcom,pdc.yaml | 1 + > .../devicetree/bindings/iommu/arm,smmu.yaml | 2 + > .../devicetree/bindings/mailbox/qcom-ipcc.yaml | 1 + > .../devicetree/bindings/mfd/qcom,tcsr.yaml | 1 + > .../devicetree/bindings/nvmem/qcom,qfprom.yaml | 1 + > .../bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml | 2 + > .../devicetree/bindings/power/qcom,rpmpd.yaml | 1 + > .../bindings/remoteproc/qcom,sa8775p-pas.yaml | 6 + > .../bindings/soc/qcom/qcom,aoss-qmp.yaml | 1 + > .../devicetree/bindings/sram/qcom,imem.yaml | 1 + > .../devicetree/bindings/ufs/qcom,ufs.yaml | 2 + > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 246 ++++ > arch/arm64/boot/dts/qcom/qcs8300.dtsi | 1282 ++++++++++++++++++++ > arch/arm64/configs/defconfig | 3 + > drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 3 + > drivers/pmdomain/qcom/rpmhpd.c | 24 + > drivers/remoteproc/qcom_q6v5_pas.c | 3 + > include/dt-bindings/power/qcom-rpmpd.h | 19 + > 21 files changed, 1609 insertions(+) > --- > base-commit: eb8c5ca373cbb018a84eb4db25c863302c9b6314 > change-id: 20240829-qcs8300_initial_dtsi-1a386eb317d3 > > Best regards, > -- > Jingyi Wang <quic_jingyw@xxxxxxxxxxx> > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y qcom/qcs8300-ride.dtb' for 20240904-qcs8300_initial_dtsi-v1-0-d0ea9afdc007@xxxxxxxxxxx: In file included from arch/arm64/boot/dts/qcom/qcs8300-ride.dts:11: arch/arm64/boot/dts/qcom/qcs8300.dtsi:6:10: fatal error: dt-bindings/clock/qcom,qcs8300-gcc.h: No such file or directory 6 | #include <dt-bindings/clock/qcom,qcs8300-gcc.h> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. make[3]: *** [scripts/Makefile.lib:434: arch/arm64/boot/dts/qcom/qcs8300-ride.dtb] Error 1 make[2]: *** [scripts/Makefile.build:490: arch/arm64/boot/dts/qcom] Error 2 make[2]: Target 'arch/arm64/boot/dts/qcom/qcs8300-ride.dtb' not remade because of errors. make[1]: *** [/home/rob/proj/linux-dt-testing/Makefile:1390: qcom/qcs8300-ride.dtb] Error 2 make: *** [Makefile:224: __sub-make] Error 2 make: Target 'qcom/qcs8300-ride.dtb' not remade because of errors.
