Linux on ARM based TI OMAP SoCs
[Prev Page][Next Page]
- RE: [PATCH 14/17] omap4: cpuidle: Add MPUSS RET OFF states, (continued)
- [PATCH v7 00/12] omap3: pm: TWL4030 power scripts and workaround for TWL errata 27,
Lesly A M
- [PATCH 01/12] omap3: pm: Fix for the TRITON sleep/wakeup sequence,
Lesly A M
- [PATCH 02/12] omap3: pm: Correct the warning print during script loading,
Lesly A M
- [PATCH 03/12] omap3: pm: cleanup pmic_info structure,
Lesly A M
- [PATCH 04/12] omap3: pm: Using separate clk/volt setup_time for RET and OFF states,
Lesly A M
- [PATCH 05/12] omap3630: pm: Adding voltage controller data,
Lesly A M
- [PATCH 06/12] omap3: pm: Correcting the sys_offmode signal polarity,
Lesly A M
- [PATCH 08/12] omap3: pm: TWL4030 power scripts for OMAP3 boards,
Lesly A M
- [PATCH 10/12] mfd: TWL4030: changes for TRITON Errata 27 workaround,
Lesly A M
- [PATCH 09/12] omap3: pm: TWL5030 version checking,
Lesly A M
- [PATCH 11/12] omap3430: Updating the board file to use TWL4030 scripts,
Lesly A M
- [PATCH 07/12] omap3: pm: Re-programing the setup time based on CORE target state,
Lesly A M
- [PATCH 12/12] omap3630: Updating the board file to use TWL4030 scripts,
Lesly A M
- Re: [PATCH v7 00/12] omap3: pm: TWL4030 power scripts and workaround for TWL errata 27,
Jean Pihet
- Re: [PATCH v7 00/12] omap3: pm: TWL4030 power scripts and workaround for TWL errata 27,
Kevin Hilman
- [PATCH] omap: rx51: Add SI4713 FM transmitter,
Jarkko Nikula
- [PATCH v3 00/13] OMAP: McBSP: hwmod adaptation and runtime conversion,
Kishon Vijay Abraham I
- [PATCH v3 01/13] OMAP: hwmod: allow hwmod to provide address space accessible from SDMA,
Kishon Vijay Abraham I
- [PATCH v3 02/13] OMAP: McBSP: Convert McBSP to platform device model,
Kishon Vijay Abraham I
- [PATCH v3 09/13] OMAP: McBSP: use omap_device APIs to modify SYSCONFIG,
Kishon Vijay Abraham I
- [PATCH v3 13/13] OMAP: hwmod: Removal of macros for data that is obtained from hwmod database,
Kishon Vijay Abraham I
- [PATCH v3 04/13] OMAP2430: hwmod data: Add McBSP,
Kishon Vijay Abraham I
- [PATCH v3 07/13] OMAP3: hwmod: add dev_attr for McBSP sidetone,
Kishon Vijay Abraham I
- [PATCH v3 08/13] OMAP2+: McBSP: hwmod adaptation for McBSP,
Kishon Vijay Abraham I
- [PATCH v3 05/13] OMAP3: hwmod data: Add McBSP,
Kishon Vijay Abraham I
- [PATCH v3 10/13] OMAP: McBSP: Add pm runtime support,
Kishon Vijay Abraham I
- [PATCH v3 12/13] ASoC: McBSP: get hw params from McBSP driver,
Kishon Vijay Abraham I
- [PATCH v3 11/13] OMAP: McBSP: APIs to pass DMA params from McBSP driver to client drivers,
Kishon Vijay Abraham I
- [PATCH v3 06/13] OMAP4: hwmod: Naming of address space,
Kishon Vijay Abraham I
- [PATCH v3 03/13] OMAP2420: hwmod data: Add McBSP,
Kishon Vijay Abraham I
- Re: [PATCH v3 00/13] OMAP: McBSP: hwmod adaptation and runtime conversion,
Jarkko Nikula
- Re: [PATCH v3 00/13] OMAP: McBSP: hwmod adaptation and runtime conversion,
Peter Ujfalusi
- [RFC/PATCH] OMAP: Fix section mismatch,
Thomas Weber
- [PATCH 0/2] l2x0: Add PL310 Errata 727915,
Santosh Shilimkar
[GIT PULL] OMAP USB Patches for 2.6.39,
Felipe Balbi
[PATCH v2] OMAP: DSS2: Have separate irq handlers for DISPC and DSI,
Archit Taneja
watchdog pdev id set to -1,
Koyamangalath, Abhilash
[PATCH 1/4] OMAP: voltage: pre- and post-transition notifiers,
Mike Turquette
[GIT PULL] USB patches,
Felipe Balbi
omapfb: no driver for display,
Sung Hee Park
[PATCH v6 0/4] omap: mailbox: hwmod support,
Omar Ramirez Luna
Re: Ping-> Subject: [PATCH] omap: omap3evm: add support for the WL12xx WLAN module to the omap3evm,
Tony Lindgren
Re: Re: Ping-> Subject: [PATCH] omap: omap3evm: add support for the WL12xx WLAN module to the omap3evm,
Reizer, Eyal
<Possible follow-ups>
Re: Re: Ping-> Subject: [PATCH] omap: omap3evm: add support for the WL12xx WLAN module to the omap3evm,
Eyal Reizer
FW: Re: Ping-> Subject: [PATCH] omap: omap3evm: add support for the WL12xx WLAN module to the omap3evm,
Reizer, Eyal
[PATCH] OMAP: DSS2: Have separate irq handlers for DISPC and DSI,
Archit Taneja
[PATCH v5 0/5] ARM: omap[34]: Thumb-2 compatibility fixes,
Dave Martin
[patch-v2.6.39 0/7] Patches for next merge window,
Felipe Balbi
[patch-v2.6.39 00/12] OMAP USB and MUSB patches for Next,
Felipe Balbi
- [patch-v2.6.39 01/12] usb: musb: do not error out if Kconfig doesn't match board mode,
Felipe Balbi
- [patch-v2.6.39 02/12] usb: musb: gadget: beautify usb_gadget_probe_driver()/usb_gadget_unregister_driver,
Felipe Balbi
- [patch-v2.6.39 04/12] usb: musb: Using runtime pm APIs for musb.,
Felipe Balbi
- [patch-v2.6.39 05/12] usb: otg: enable regulator only on cable/device connect,
Felipe Balbi
- [patch-v2.6.39 06/12] usb: otg: Remove one unnecessary I2C read request.,
Felipe Balbi
- [patch-v2.6.39 07/12] usb: otg: OMAP4430: Add phy_suspend function pointer to twl4030_usb_data,
Felipe Balbi
- [patch-v2.6.39 09/12] usb: otg: TWL6030: Introduce the twl6030_phy_suspend function.,
Felipe Balbi
- [patch-v2.6.39 10/12] usb: otg: TWL6030 Save the last event in otg_transceiver,
Felipe Balbi
- [patch-v2.6.39 11/12] usb: musb: OMAP4430: Fix usb device detection if connected during boot,
Felipe Balbi
- [patch-v2.6.39 08/12] usb: otg: OMAP4430: Introducing suspend function for power management,
Felipe Balbi
- [patch-v2.6.39 12/12] usb: otg: notifier: switch to atomic notifier,
Felipe Balbi
- [patch-v2.6.39 03/12] usb: musb: gadget: do not poke with gadget's list_head,
Felipe Balbi
[patch v2.6.39 0/3] Patches for next merge window,
Felipe Balbi
OMAP4 Mux FW question,
archit taneja
[PATCH 0/8] OMAP4: hwmod data: Add a bunch of IPs,
Benoit Cousson
- [PATCH 1/8] OMAP4: hwmod data: Add hwspinlock,
Benoit Cousson
- [PATCH 2/8] OMAP4: hwmod data: Add McSPI,
Benoit Cousson
- [PATCH 4/8] OMAP4: hwmod data: Add DSS, DISPC, DSI1&2, RFBI, HDMI and VENC,
Benoit Cousson
- [PATCH 3/8] OMAP4: hwmod data: Add timer,
Benoit Cousson
- [PATCH 5/8] OMAP4: hwmod data: Add mailbox,
Benoit Cousson
- [PATCH 6/8] OMAP4: hwmod data: Add DMIC,
Benoit Cousson
- [PATCH 7/8] OMAP4: hwmod data: Add McBSP,
Benoit Cousson
- [PATCH 8/8] OMAP4: hwmod data: Add AESS, McPDM, bandgap, counter_32k, MMC, KBD, ISS & IPU,
Benoit Cousson
- Re: [PATCH 0/8] OMAP4: hwmod data: Add a bunch of IPs,
G, Manjunath Kondaiah
[PATCH] omap3: Adding vdd_sdi regulator supply to OMAP3EVM,
Bryan Wu
[PATCH 0/6 v8]usb: musb: hwmod and runtime pm support for musb,
Hema HK
[1/7 v4] usb: otg: enable regulator only on cable/device connect,
Hema HK
[PATCH 0/5] OMAP: clock: miscellaneous fixes and dead code removal for 2.6.39,
Paul Walmsley
omap3evm does not boot after 2.6.38-rc1,
Sung Hee Park
[PATCH 0/6] CBUS Third try,
Felipe Balbi
[PATCH 0/6] CBUS Second try,
Felipe Balbi
[PATCH v3 0/2] OMAP: IOMMU fault callback support,
David Cohen
[RESEND][PATCH v2] OMAP: DSS: Adding two APIs for panel-taal: check_timings and set_timings,
Mayuresh Janorkar
[PATCH v10 00/11] dmtimer adaptation to platform_driver,
Tarun Kanti DebBarma
- [PATCH v10 01/11] OMAP2+: dmtimer: add device names to flck nodes,
Tarun Kanti DebBarma
- [PATCH v10 04/11] OMAP3: hwmod data: add dmtimer,
Tarun Kanti DebBarma
- [PATCH v10 10/11] OMAP: dmtimer: pm_runtime support,
Tarun Kanti DebBarma
- [PATCH v10 03/11] OMAP2430: hwmod data: add dmtimer,
Tarun Kanti DebBarma
- [PATCH v10 11/11] OMAP: dmtimer: add timeout to low-level routines,
Tarun Kanti DebBarma
- [PATCH v10 05/11] OMAP4: hwmod data: add dmtimer,
Tarun Kanti DebBarma
- [PATCH v10 09/11] OMAP: dmtimer: switch-over to platform device driver,
Tarun Kanti DebBarma
- [PATCH v10 06/11] OMAP1: dmtimer: conversion to platform devices,
Tarun Kanti DebBarma
- [PATCH v10 08/11] OMAP: dmtimer: platform driver,
Tarun Kanti DebBarma
- [PATCH v10 07/11] OMAP2+: dmtimer: convert to platform devices,
Tarun Kanti DebBarma
- [PATCH v10 02/11] OMAP2420: hwmod data: add dmtimer,
Tarun Kanti DebBarma
- Re: [PATCH v10 00/11] dmtimer adaptation to platform_driver,
Tony Lindgren
[PATCH 1/2] mfd: twl4030: Driver for twl4030 madc module,
Keerthy
[PATCH 0/6 v7]usb: musb: hwmod and runtime pm support for musb,
Hema HK
[PATCH 2/2] hwmon: twl4030: Hwmon Driver for TWL4030 MADC,
Keerthy
[PATCH 0/3] OMAP2+ hwmod fixes,
Rajendra Nayak
[PATCH]: usb: musb: AM35x: moving internal phy functions out of usb_musb.c file,
Hema HK
[PATCH] OMAP2+: PM: Warn users of sleep_while_idle if !CONFIG_CPU_IDLE,
Rajendra Nayak
[no subject],
Hema HK
[no subject],
Hema HK
[1/7 v3] usb: otg: enable regulator only on cable/device connect,
Hema HK
[PATCH 1/2] omap4: 4430sdp: drop ehci support,
Anand Gadiyar
[PATCH] usb: ehci-omap: add support for TLL mode on OMAP4,
Anand Gadiyar
[PATCH] omap4: usb: explicitly configure MUSB pads,
Anand Gadiyar
[PATCH 0/3] OMAP3 PM: CPUIdle fixes,
Vishwanath BS
Omapdss Managers confusion,
Robert Wörle
[PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx,
Paul Walmsley
- [PATCH 01/11] OMAP2+: clock: disable autoidle on all clocks during clock init,
Paul Walmsley
- [PATCH 02/11] OMAP2: clock: add DPLL autoidle support,
Paul Walmsley
- [PATCH 05/11] OMAP2+: clock: add interface clock type code with autoidle support,
Paul Walmsley
- [PATCH 06/11] OMAP2420: clock: add sdrc_ick,
Paul Walmsley
- [PATCH 08/11] OMAP2430/3xxx: clock: add modem clock autoidle support,
Paul Walmsley
- [PATCH 10/11] OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocks,
Paul Walmsley
- [PATCH 07/11] OMAP2420: clock: use autoidle clkops for all autoidle-controllable interface clocks,
Paul Walmsley
- [PATCH 09/11] OMAP2430: clock: use autoidle clkops for all autoidle-controllable interface clocks,
Paul Walmsley
- [PATCH 11/11] OMAP2/3: PM: remove manual CM_AUTOIDLE bit setting in mach-omap2/pm*xx.c,
Paul Walmsley
- [PATCH 04/11] OMAP2+: clock: comment that osc_ck/osc_sys_ck should use clockfw autoidle control,
Paul Walmsley
- [PATCH 03/11] OMAP2xxx: clock: add clockfw autoidle support for APLLs,
Paul Walmsley
- RE: [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx,
Rajendra Nayak
- RE: [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx,
Rajendra Nayak
- Re: [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx,
Kevin Hilman
[PATCH 3/3] OMAP4: Enable Turbo and Nitro OPP for OMAP4,
Shweta Gulati
[PATCH 2/3] OMAP2+: Replace Voltage values with Macros.,
Shweta Gulati
[PATCH 1/3] OMAP4: Revise MPU Voltage rail values.,
Shweta Gulati
[PATCH 0/3]: Update OPP Table and Voltage Rail Values,
Shweta Gulati
[PATCH v11 18/18] OMAP2,3: DSS2: Get DSS IRQ from platform device,
Sumit Semwal
[PATCH v2] i2c-omap: Double clear of ARDY status in IRQ handler,
Keerthy
[PATCH v4 1/3] OMAP2PLUS: DSS2: Add OMAP4 Kconfig support,
Sumit Semwal
[PATCH v7 4/4] TI816X: Add low level debug support,
Hemant Pedanekar
[PATCH v7 3/4] TI816X: Create board support and enable build for TI816X EVM,
Hemant Pedanekar
[PATCH v7 2/4] TI816X: Update common OMAP machine specific sources,
Hemant Pedanekar
[PATCH v7 1/4] TI816X: Update common omap platform files,
Hemant Pedanekar
[PATCH v7 0/4] Introduce support for TI816X processor series,
Hemant Pedanekar
[PATCHv2] omap2/3: dmtimer: Enable autoidle,
Tero Kristo
[PATCH v2 0/1] OMAP: IOMMU fault callback support,
David Cohen
[PATCH 0/2] IOMMU fault callback support,
David Cohen
[PATCH 0/6] trivial compile warning fixes,
Felipe Balbi
hwmod: multi-omap: disabling smartreflex on AM3517,
Premi, Sanjeev
[PATCH v2] OMAP: IOMMU: add missing function declaration,
David Cohen
[PATCH 0/2] omap3: minor clean-up in flash related code,
Sanjeev Premi
[1/7 v2] usb: otg: enable regulator only on cable/device connect,
Hema HK
[Index of Archives]
[Linux USB Devel]
[Linux Media]
[Video for Linux]
[Big List of Linux Books]
[Linux WPAN Networking]
[Linux SCSI]
[Scanners]
[Yosemite Forum]
