Hi, Thanks for your reply. 2011/2/19 Felipe Contreras <felipe.contreras@xxxxxxxxx>: > On Sat, Feb 19, 2011 at 9:41 AM, Ming Lei <tom.leiming@xxxxxxxxx> wrote: >>> It looks like an issue with what you have selected in the menuconfig. Could >>> you ensure you have DPI and VENC selected, and in displays Generic DPI panel >>> and sharp-ls panel selected. >> >> Even after enabling all this options above, there is still the failure >> message on my pandaboard(2.6.38-rc5-next-20110217): >> >> [ 0.000000] Kernel command line: console=ttyO2,115200n8 vram=16M >> root=/dev/mmcblk0p2 rw earlyprintk rootfstype=ext3 rootwait >> ...... >> [ 2.847625] omapfb omapfb: no displays >> [ 2.851562] omapfb omapfb: failed to setup omapfb >> [ 2.856719] omapfb: probe of omapfb failed with error -22 > > Note that the command line parameters are ignored since 2.6.36, you I don't think the 'vram=16M' is ignored by kernel, which can be found below: [ 0.000000] Memory: 1008MB = 1008MB total [ 0.000000] Memory: 1006160k/1006160k available, 42416k reserved, 245760K highmem The 16M bytes is reserved by the para vram=16M'. > need to specify CONFIG_OMAP2_VRAM_SIZE. Same with before even CONFIG_OMAP2_VRAM_SIZE is configured as 16M Bytes. thanks, -- Lei Ming -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
