Lesly A M <leslyam@xxxxxx> writes: > Patch series for TWL4030 power scripts and workaround for TWL errata 27. > > Changes for implementing TWL4030 power scripts recommended by hardware team. > Introduced a new TWL4030 power script file, which can be used by different > OMAP3 board with the power companion chip TWL4030. > > Updated the changes for TWL4030 errata 27 & 28, modified the > TWL4030 power script and voltage controller setuptime. > Workaround for TWL4030 errata 27 & 28 is required for > Si version less than or equal to TWL5030 ES1.1. > > TWL4030 script changes rebased on Kevin's PM tree in pm branch. What is the dependency on my PM branch? It looks like this can be based on mainline or l-o master. Kevin > Changes in v7: > changes to fix Nishanth Menon's comments > i) Added the TWL4030 Errata 27 fix > > split the first patch in v6 > i) fix for twl4030 script load > ii) correct the warning print during script loading > > Added new patch files > i) pmic_info struct cleanup > ii) changing sys_off signal polarity > > Updated the change logs > > This changes are tested on OMAP3430 & OMAP3630 SDP with off mode enabled in suspend path. > Tested with suspend/resume script, which will test system suspend in a loop. > Tested for more than 1000 iterations. > > Cc: Nishanth Menon <nm@xxxxxx> > Cc: David Derrick <dderrick@xxxxxx> > Cc: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx> > --- > Lesly A M (12): > omap3: pm: Fix for the TRITON sleep/wakeup sequence > omap3: pm: Correct the warning print during script loading > omap3: pm: cleanup pmic_info structure > omap3: pm: Using separate clk/volt setup_time for RET and OFF states > omap3630: pm: Adding voltage controller data > omap3: pm: Correcting the sys_offmode signal polarity > omap3: pm: Re-programing the setup time based on CORE target state > omap3: pm: TWL4030 power scripts for OMAP3 boards > omap3: pm: TWL5030 version checking > mfd: TWL4030: changes for TRITON Errata 27 workaround > omap3430: Updating the board file to use TWL4030 scripts > omap3630: Updating the board file to use TWL4030 scripts > > arch/arm/mach-omap2/Makefile | 12 +- > arch/arm/mach-omap2/board-3430sdp.c | 3 +- > arch/arm/mach-omap2/board-zoom-peripherals.c | 2 + > arch/arm/mach-omap2/omap_twl.c | 369 +++++++++++++++++++++++--- > arch/arm/mach-omap2/pm34xx.c | 15 +- > arch/arm/mach-omap2/twl4030.c | 261 ++++++++++++++++++ > arch/arm/mach-omap2/twl4030.h | 21 ++ > arch/arm/mach-omap2/voltage.c | 167 +++++++++--- > arch/arm/plat-omap/include/plat/voltage.h | 49 +++- > drivers/mfd/twl-core.c | 50 ++++ > drivers/mfd/twl4030-power.c | 79 ++++++- > include/linux/i2c/twl.h | 45 +++- > 12 files changed, 961 insertions(+), 112 deletions(-) > create mode 100644 arch/arm/mach-omap2/twl4030.c > create mode 100644 arch/arm/mach-omap2/twl4030.h > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html