Hi, >-----Original Message----- >From: Sergei Shtylyov [mailto:sshtylyov@xxxxxxxxxx] >Sent: Tuesday, February 15, 2011 5:49 PM >To: Hema HK >Cc: linux-usb@xxxxxxxxxxxxxxx; linux-omap@xxxxxxxxxxxxxxx; >Felipe Balbi; Tony Lindgren >Subject: Re: [4/7 v2] usb: otg: OMAP4430: Add phy_suspend >function pointer to > >Hello. > >On 15-02-2011 12:42, Hema HK wrote: > > The subject seems incomplete. Yes. it suppose to be "usb: otg: OMAP4430: Add phy_suspend function pointer to twl4030_usb_data" I will correct it > >> From: Kalliguddi, Hema<hemahk@xxxxxx> > >> Introduce the .phy_suspend function pointer to >twl4030_usb_data structure. >> assign the function to it for both sdp board and panda boards. >> This will be used by the twl6030-usb transceiver driver. > >> Signed-off-by: Hema HK<hemahk@xxxxxx> >> Cc: Felipe Balbi<balbi@xxxxxx> >> Cc: Tony Lindgren<tony@xxxxxxxxxxx> > >[...] > >> Index: linux-2.6/arch/arm/mach-omap2/board-4430sdp.c >> =================================================================== >> --- linux-2.6.orig/arch/arm/mach-omap2/board-4430sdp.c >> +++ linux-2.6/arch/arm/mach-omap2/board-4430sdp.c >> @@ -272,6 +272,7 @@ static struct twl4030_usb_data omap4_usb >> .phy_exit = omap4430_phy_exit, >> .phy_power = omap4430_phy_power, >> .phy_set_clock = omap4430_phy_set_clk, >> + .phy_suspend = omap4430_phy_suspend, >> }; >> >> static struct omap2_hsmmc_info mmc[] = { >> Index: linux-2.6/arch/arm/mach-omap2/board-omap4panda.c >> =================================================================== >> --- linux-2.6.orig/arch/arm/mach-omap2/board-omap4panda.c >> +++ linux-2.6/arch/arm/mach-omap2/board-omap4panda.c >> @@ -153,6 +153,7 @@ static struct twl4030_usb_data omap4_usb >> .phy_exit = omap4430_phy_exit, >> .phy_power = omap4430_phy_power, >> .phy_set_clock = omap4430_phy_set_clk, >> + .phy_suspend = omap4430_phy_suspend, >> }; >> >> static struct omap2_hsmmc_info mmc[] = { >> Index: linux-2.6/arch/arm/plat-omap/include/plat/usb.h >> =================================================================== >> --- linux-2.6.orig/arch/arm/plat-omap/include/plat/usb.h >> +++ linux-2.6/arch/arm/plat-omap/include/plat/usb.h >> @@ -88,6 +88,7 @@ extern int omap4430_phy_power(struct dev >> extern int omap4430_phy_set_clk(struct device *dev, int on); >> extern int omap4430_phy_init(struct device *dev); >> extern int omap4430_phy_exit(struct device *dev); >> +extern int omap4430_phy_suspend(struct device *dev, int suspend); > > I think this *extern* declaration should be a part of the >previous patch. What is the problem if extern when using? > >> #endif >> >> Index: linux-2.6/include/linux/i2c/twl.h >> =================================================================== >> --- linux-2.6.orig/include/linux/i2c/twl.h >> +++ linux-2.6/include/linux/i2c/twl.h >> @@ -600,6 +600,8 @@ struct twl4030_usb_data { >> int (*phy_power)(struct device *dev, int >iD, int on); >> /* enable/disable phy clocks */ >> int (*phy_set_clock)(struct device *dev, int on); >> + /* suspend/resume of phy */ >> + int (*phy_suspend)(struct device *dev, int suspend); >> }; > > I'd make the above the only change in this patch, and add >all the other >changes into the previous patch (which then I'd change places >with that one). > No. if I do that git bisect fails. Initializer does not make any sense without function poointer declaration. Regards, Hema >WBR, Sergei > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
